SCSM 2012 AD Connector Sync Failure
Good afternoon,
We had an AD connector which synced everything in AD in one big go, which was an initial deployment mistake. This Connector functioned fine, but brought in lots of "rubbish" which we didnt want in our SCSM deployment. Due to the nature of our OU structure
we decided to go down the route of creating multiple connectors for multiple OUs within AD (we cant change AD structure) By going down this route we could take our user count down from 20,000+ to around 6,000. Much cleaner and quicker.
We disabled the original connector, which went fine, created all the new connectors and all synced fine (and quickly) with the exception of one. Sods law the IT Admins OU! The connector sticks and throws an error at 92% every time. Tried disabling \ enabling,
Manual Sync, Bouncing Management Servers. Even deleting and recreating the connector but it always sticks at the same point.
I have gone through the OU with a fine toothcomb and cannot spot anything out the ordinary with any of the accounts. I have removed disbaled accounts, contacts, groups, test accounts etc... so it is now just pure live IT Admins. I picked up on the error
from the MOM eventlog which seemed to point me in the "Manager" AD Attribute direction. So I proceeded to remove all Manager and Subordinate information from all 70 accounts. Still no joy.
Below is my MOM Eventlog Error Message does anyone have any ideas on where else I should be looking?
Data synchronization failed by DefaultCache.MomStore.ADUsers_Manager.DefaultCache.ADConnector.5e0dd86d1c3a4b8eaf75951c55ed0877:Microsoft.EnterpriseManagement.ServiceManager.Connector.Sql.DataConnectorSql.
Exception type:NullReferenceException
Exception message:Object reference not set to an instance of an object..
StackTrace: at Microsoft.EnterpriseManagement.ServiceManager.Linking.Consumer.OperationalStore.DataSetTransformer.ComputeManagerDeletes(Dictionary`2 result, IList`1 existingManagers, Dictionary`2 userToNewManager)
at Microsoft.EnterpriseManagement.ServiceManager.Linking.Consumer.OperationalStore.DataSetTransformer.DeleteObsoleteManagerRelationships(ManagementPackRelationship relationshipType, Dictionary`2 result, EnterpriseManagementGroup managementGroup)
at Microsoft.EnterpriseManagement.ServiceManager.Linking.Consumer.OperationalStore.DataSetTransformer.TransformToEnterpriseManagementObjects(EnterpriseManagementGroup managementGroup, ManagementPackType storeType, SessionSettings sessionSettings,
Boolean useStagingSDK, Boolean isGRCSolution)
at Microsoft.EnterpriseManagement.ServiceManager.Linking.Consumer.OperationalStore.OperationalStoreConsumer.ConsumeData(DataSet data, SessionSettings sessionSettings)
at Microsoft.EnterpriseManagement.ServiceManager.Connector.Datacenter.SessionHost.DataSync()
Thanks, Morten! Same issue here... and a little bit more challenging as we have 2 domains and a manager on one domain could have direct reports on another one :|
Similar Messages
-
SCO 2012 r2 and SCSM 2012 r2 Connector
Dear all,
I am new to Orchestrator, we just installed Orchestrator in Lab , we have SCSM as well . We just want to automate the SCSM and SCO like if we create a ticket for user creation in SCSM , it should
trigger SCO and automatically User should create. Could you please let me know how to integrate or connecter between both.
Thanks,
Sengottuvel MHi,
how to create a Connector in Service Manager to trigger Orchestrator Runbook is described here:
http://technet.microsoft.com/en-us/library/hh519779.aspx
With the System Center 2012 Integration Pack (IP) for System Center 2012 R2 Service Manager you can Integrate Sevice Manager Activities in you Orchestrator Workflow. You can get the IP from here:
http://www.microsoft.com/en-us/download/details.aspx?id=39622&WT.mc
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu -
SCSM 2012 Exchange connector 3.0 Status Never Run.
HI ,
SCSM exchange connector was Running for almost 8 months . all of sudden it stopped pulling email from Exchange Server.
I looked in to the issue and did not found any major error in the Event log “Operation Manager”
Only event were warning, “OpsMgr Config Service failed to send the dirty state notifications to the dirty OpsMgr Health Services. This may be happening because the Root OpsMgr Health Service is not running.” I did not installed SCOM at
all. This server is not connected to any SCOM server.
I have reinstalled the Exchange web Service API (copied file to SCSM folder)
I have reinstalled exchange connector 3.0 (copied files to SCSM folder and imported management packs)
Created new Exchange connector and all test passed.
But the connector status stays “Never Run”
In my regedit ,I also made the following changes
KEY_LOCAL_MACHINE\SOFTWARE\Microsoft\System Center Service Manager Exchange Connector
EnableEWSTracing = 7
LoggingLevel= 7
I have also looked and tried every option with “Run as Account” and also making admin Role.
I am not getting any error in the log apart from following warning .
I did not found any major error in the Event log “Operation Manager
Only event were warning, “OpsMgr Config Service failed to send the dirty state notifications to the dirty OpsMgr Health Services. This may be happening because the Root OpsMgr Health Service is not running.
Can someone help me , what should be the next step.the reason you are seeing operations manager errors is because Service manager uses the operations manager SDK to do all of it's work. the error that you are seeing "OpsMgr Config Service failed to send the dirty state notifications to the dirty OpsMgr
Health Services. This may be happening because the Root OpsMgr Health Service is not running." means that the service manager configuration service can't notify the data access service that there are changes to it's MP base, for whatever reason.
i would stop all the system center services on this server, go into the service manager folder, find the "Health state" and "Config State" folders, and move them somewhere else on the system, then restart both services. assuming your
system isn't otherwise damaged, this will force both the config and data access services to rebuild their cache from the database, and should unstick your workflows. -
Scsm 2012 - exchange connector 3
Hi,
I have been asked to check that we are on exchange connector 3, am i correct in saying that the bit I have highlighted below shows we are on exchange connector 3 already?
Plus i noticed the version number of 7.5.8501.0 is old and this maybe why we have no option to select/or unselect 'log items for user from CMDB only' when we set up an exchange connector. Does
anyone know how I can update this?
<ManagementPack ContentReadable="true" SchemaVersion="2.0" OriginalSchemaVersion="1.1" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Manifest>
<Identity>
<ID>Microsoft.SystemCenter.ExchangeConnector</ID>
<Version>3.0.0.0</Version>
</Identity>
<Name>Microsoft.SystemCenter.ExchangeConnector</Name>
<References>
<Reference Alias="ServiceManager.LinkingFramework.Library">
<ID>ServiceManager.LinkingFramework.Library</ID>
<Version>7.5.3079.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Console">
<ID>Microsoft.EnterpriseManagement.ServiceManager.UI.Console</ID>
<Version>7.5.3079.61</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Windows">
<ID>Microsoft.Windows.Library</ID>
<Version>7.5.8501.0</Version>oh, you did start another thread....
ok, you might want to make sure you are using
the RTM version, rather then the RC version which was also called 3.0.
the version number you reference is the expected minimum version of the Microsoft.Windows.Library (which explains why it has the somewhat odd version number). it's ok if it's below the current version, since this is just the minimum accepted version
for that Reference Alias. -
SCSM 2012 R2 AD connector sync issue
Hi Guys,
I have a very strange
issue with the AD connector and have been struggling with it for a couple of days now. Frankly I’m out of options and hope some here can help me out.
Let me start by telling you briefly how our environment is setup.
Domain1 : 500 users, 600 workstations, 100 servers
Mainly used for office automation, with Exchange2010, MS SQL2008R2, Link, SCOM 2012 R2, SCCM2012 Windows 7 clients etc. Domain level is 2008 R2, with two domain
controllers.
Domain2 : 50 users, 250 servers
Web and Application servers.
Domain3 : 80 workstations, 100 users
Just a bunch of workstations for public use.
Service Manager : is member of Domain1
Version : SCSM 2012 R2
OS
: Windows Server 2012 R2 x64
SCSM-SRV-1
: management server
SCSM-SRV-2
: Datawarehouse server
MS SQL cluster 2008 R2 x64
Instance1
: Service Manager database
Instance2
: Datawarehouse databases
Domain1
AD_Connector1 : Users
AD_Connector2 : Servers/workstations
AD_Connector3 : Printers
SCCM connector
SCOM CI connector
Exchange connector
Domain2
AD_Connector4 : Users
AD_Connector5 : Servers
Domain3
AD_Connector6 : Users
AD_Connector7 : Servers/Workstations
The problem is only with the AD connectors for Domain1, the ones for domain 2 and 3 are working as they should.
What happens;
1. Create AD_Connector1 succesfully
2. Start a manual sync, all goes well. CMDB now contains all users from domain1
3. Create some new users in AD
4. Start a manual sync, new users are not synced.
When I reboot SCSM-SRV-1 and do a manual sync users are populated again.
Doing a second sync after adding users they again don't get synced. When I leave it at this the users apear in the CMDB after a couple of days (varies from 1 to
5 days).
When succesful the evenlog shows event id, 3102, 3103, 333, 3305, 3339, 34011 and 34012
When it goes wrong the evenlog shows event id, 3102, 3103, 333, 3305
and 3339. Further no errors.
I tried;
- recreating the connectors
- using different service accounts
- created a second service manager environment for testing purposes. (freshly installed SCSM with only 2 AD connectors one for domain1 users (TESTOU) and one for
domain2 users (TESTOU). Same problem the one for domain2 manualy syncs well each time I try and the one for domain1 only the first time after a reboot.
Since the problem occurs only with domain1, and the connector at least works well the first time, I assume there is no problem with the Service Manager
installation.
I checked the domain controllers and see no problems everything looks oke.
Hope some one can shed some light on this for me.Hi there,
ve tried installing the upgrade
SCSM Rollu2 -
SCSM 2012 R2 workflows and connectors are not triggered
Hi All,
Suddenly in my SCSM 2012 R2 Production environment , the connectors stopped synchronising at the schedule time and the Service request was in New state for very long time (stuck in New state).
When I started troubleshooting , I saw the workflow status in SCSM console , oops!! no entries
In operations manager event log , no logs generated regarding the connector issue or the SR workflow issue .
Then I tried starting the AD connector manually , two event logs (information-LFX service) generated
SyncBegin:Connector Id
SyncEnd:Connector Id
Then I stopped the services
Microsoft Monitoring Agent
System Center Data Access Service
System Center Management Configuration
deleted the health service state folder content and restarted the services
Then issue is solved , the connector started syncg and the service request state changed from New to In progress and all the workflows were triggered.
Since there is no events logged for this issue , this gonna make a huge impact in SCSM environment since workflows are the key feature in SCSM .
Is this a known issue in SCSM 2012 R2 and are there is any fix in the update rollups
Are there is any reason behind why we need to flush the SCSM health service state and how this affect the functioning of SCSM?
since we have the SCOM agent installed as part of SCSM installation and scom uses the same Health service state folder to monitor the SCSM server ??
sorry for too many questions , just to clarify my all doubts
Is there any permanent solution ?
Thanks,
KalaiHi,
This issue seems like a performance issue. It is recommended that you schedule the AD/SCCM connectors to run when console/system usage is low since it can have an impact on performance. You can use the following instructions to reschedule the AD connectors.
http://blog.scsmsolutions.com/2012/03/update-ad-and-sccm-connector-scheduler-with-powershell/
And here is a similar thread for you referenc, please go through it for more details:
Connectors are not Syncing in Service manager 2012 Sp1 RTM
https://social.technet.microsoft.com/Forums/systemcenter/en-US/2824c769-99ea-4ec6-ab7b-1007efdcb339/connectors-are-not-syncing-in-service-manager-2012-sp1-rtm?forum=connectors
Here is a link about Description of Update Rollup 2 for System Center 2012 R2 Service Manager:
https://support.microsoft.com/kb/2904710?wa=wsignin1.0
It seems that it does not have fix for this.
In addition, the newest one is Update Rollup 4 for System Center 2012 R2 Service Manager:
http://support.microsoft.com/kb/2989601
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
SCCM connector finished with error at 70% in SCSM 2012 R2
Hi All,
SCCM Connector is not working
MY environment details
SCCM 2012 R2
SCSM 2012 R2 without any UR
The connectors were working fine , but suddenly today its status is finished with error
and stuck at 70 %
Got the below in the event viewer
Data synchronization failed by DefaultCache.MomStore.Cached_CMv5_DeviceHasWSUSUpdates.DefaultCache.SCCMConnector.6708b57bd1c44e6cbdefdfb8a6bf008a:Microsoft.EnterpriseManagement.ServiceManager.Connector.Sql.DataConnectorSql.
Exception type:ConnectorException
Exception message:createBatchInfoForRealSource failed . Exception type:DatabaseLayerException
Exception message:Command type:Text
Command:declare @minWaterMark datetime,@maxWaterMark datetime;declare @batches table(batchid int, watermark varbinary(180));set @minWaterMark=convert(datetime,@waterMark);select @maxWaterMark=max(SU.Lfx_Timestamp) from [LFXSTG].v_Cached_CMv5_DeviceHasWSUSUpdates
SU where (SU.Lfx_Timestamp>@minWaterMark) and (Lfx_SourceId=4);if not @maxWaterMark is null begin with ranges(RowNo,batchid,watermark) AS (select row_number() over(order by SU.Lfx_RowId) AS RowNo,SU.Lfx_RowId,convert(varbinary(180),SU.Lfx_Timestamp)
from [LFXSTG].v_Cached_CMv5_DeviceHasWSUSUpdates SU where (SU.Lfx_Timestamp > @minWaterMark) AND (Lfx_SourceId=4) )
insert @batches select batchid,watermark FROM ranges where RowNo % @batchSize = 0; end; if not exists(select top 1 1 from @batches) AND not @maxWaterMark is NULL begin select null end else select distinct batchid from @batches
order by batchid;select convert(varbinary(180),@maxWaterMark);
Connection state:Closed
Parameter count:2
Parameter name:@waterMark,Parameter value:System.Byte[]
Parameter name:@batchSize,Parameter value:500.
StackTrace: at Microsoft.EnterpriseManagement.ObjectOrientedDatabaseLayer.DatabaseAccessLayer.GetDataSet(DataSetRequest request)
at Microsoft.EnterpriseManagement.ServiceManager.Connector.Sql.DataConnectorSql.OnCreateBatchInfoForRealSource(SessionBase session, String query, String tableName, String batchIdField, Int32 batchIdType, String watermarkField, Int32 watermarkType,
Byte[] watermark, String connectionString, Int32 batchSize)
at Microsoft.EnterpriseManagement.ServiceManager.Connector.SessionManager.DataProvider.createBatchInfoForRealSource(SessionBase session, Int32 SessionTableId, EnumTableStatus status)
Inner Exception:
Exception message:Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding..
StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable)
at Microsoft.EnterpriseManagement.ObjectOrientedDatabaseLayer.DatabaseAccessLayer.GetDataSet(DataSetRequest request)
Inner Exception:
Exception message:The wait operation timed out.
StackTrace:No available.
StackTrace: at Microsoft.EnterpriseManagement.ServiceManager.Connector.SessionManager.DataProvider.throwConnectorException(String method, String message, Object[] values)
at Microsoft.EnterpriseManagement.ServiceManager.Connector.SessionManager.DataProvider.createBatchInfoForRealSource(SessionBase session, Int32 SessionTableId, EnumTableStatus status)
at Microsoft.EnterpriseManagement.ServiceManager.Connector.SessionManager.DataProvider.PrepareBatchInfo(SessionBase session)
at Microsoft.EnterpriseManagement.ServiceManager.Connector.SessionManager.DataProvider.GetNextBatch(IConnectorSession connectorSession, Boolean batchInfoOnly)
at Microsoft.EnterpriseManagement.ServiceManager.Connector.Datacenter.SessionHost.DataSync()
and other event log 'data connectors'
Connector SCCM Connector - Primary Site
Error writing relationship of type System.DeviceHasSoftwareUpdateInstalled with Source
'xxxxxx' and Target MicrosoftUpdate for Windows 7 for x64-based Systems (KB2908783).
Message: The relationship source specified in the discovery data item is not valid.
Relationship source ID: 73efcf93-3c78-00c5-8f1b-c9aff1e4c35a
Rule ID: 59716fe0-fa9c-4c62-b46f-39b39fc2aa36
Instance:
<?xml version="1.0" encoding="utf-16"?><RelationshipInstance TypeId="{37beea15-dd27-658f-a1c0-e6a5de2cc27a}" SourceTypeId="{ea99500d-8d52-fc52-b5a5-10dcd1e9d2bd}" TargetTypeId="{7ccd1178-66c1-8fed-c363-e8896651453f}"><Settings><Setting><Name>6b5b918e-e698-fab2-28a5-1a380c91ea6e</Name><Value>f80a4355-7548-4b35-4fce-9a1a917ad85a</Value></Setting></Settings><SourceRole><Settings><Setting><Name>5c324096-d928-76db-e9e7-e629dcc261b1</Name><Value>US1TCS3W70258.nam.ad.pwcinternal.com</Value></Setting></Settings></SourceRole><TargetRole><Settings><Setting><Name>2fa20ad3-c8d8-f6d6-9224-a77cd07bf6f3</Name><Value>Microsoft</Value></Setting><Setting><Name>f9af25bc-d8e4-02ca-c607-ba9d5ad79850</Name><Value>Update
for Windows 7 for x64-based Systems (KB2908783)</Value></Setting></Settings></TargetRole></RelationshipInstance>.
This relationship change will be skipped.
If this error occurs with every synchronization, examine view Cached_CMv5_DeviceHasWSUSUpdates for correctness or the schema for type System.DeviceHasSoftwareUpdateInstalled in management pack System.Software.Library.
Any Suggestions ??
Thanks !!Hi,
Are you try to check this post :
https://social.technet.microsoft.com/Forums/systemcenter/en-US/1af3c6f6-34c2-4f79-beb5-e3055d2397e1/error-when-syncing-sccm-and-scsm-all-systems
Remy BOVI -
Hello everybody,
we have installed scsm 2012 r2 (UR 3) with exchange connector 3. We have connected the connector by the workflow Account (domain user "servicedesk" is in local admin group of the sm server and in the sm Administrators group) and have access
to the mailbox on exchange (2010; autodiscovery is working correct). We receive all mails in the servicedesk mailbox on restarting the sm services and see the mails in the opm logs. But no incidents are created and the connector stays in "never
tun" state and does not receive mails any More after the first start. What do we have missed to check? Beste regards Thomasi have added the registry keys.
the last log says:
EwsResponse: <Trace Tag="EwsResponse" Tid="1" Time="2014-08-10 18:38:52Z" Version="14.03.0067.001">
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header>
<h:ServerVersionInfo MajorVersion="14" MinorVersion="3" MajorBuildNumber="174" MinorBuildNumber="1" Version="Exchange2010_SP2" xmlns:h="http://schemas.microsoft.com/exchange/services/2006/types"
xmlns="http://schemas.microsoft.com/exchange/services/2006/types" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</s:Header>
<s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<m:FindItemResponse xmlns:m="http://schemas.microsoft.com/exchange/services/2006/messages" xmlns:t="http://schemas.microsoft.com/exchange/services/2006/types">
<m:ResponseMessages>
<m:FindItemResponseMessage ResponseClass="Success">
<m:ResponseCode>NoError</m:ResponseCode>
<m:RootFolder IndexedPagingOffset="1" TotalItemsInView="1" IncludesLastItemInRange="true">
<t:Items>
<t:Message>
<t:ItemId Id="AAMkAGM0NzI4Nzc5LWM0NWMtNDBiZC1iMjIyLWU5YTZlNGM0YjVjZgBGAAAAAADPPKNYSCzLRLMWL/UoJg1CBwAVmecTYATlQovl76GEizxlAAAAoyGrAAAVmecTYATlQovl76GEizxlAAAAo0kZAAA="
ChangeKey="CQAAABYAAAAVmecTYATlQovl76GEizxlAAAAo4Fd" />
<t:ParentFolderId Id="AAMkAGM0NzI4Nzc5LWM0NWMtNDBiZC1iMjIyLWU5YTZlNGM0YjVjZgAuAAAAAADPPKNYSCzLRLMWL/UoJg1CAQAVmecTYATlQovl76GEizxlAAAAoyGrAAA="
ChangeKey="AQAAAA==" />
<t:ItemClass>IPM.Note</t:ItemClass>
<t:Subject>Test 1</t:Subject>
<t:Sensitivity>Normal</t:Sensitivity>
<t:DateTimeReceived>2014-08-10T18:35:12Z</t:DateTimeReceived>
<t:Size>2858</t:Size>
<t:Importance>Normal</t:Importance>
<t:IsSubmitted>false</t:IsSubmitted>
<t:IsDraft>false</t:IsDraft>
<t:IsFromMe>false</t:IsFromMe>
<t:IsResend>false</t:IsResend>
<t:IsUnmodified>true</t:IsUnmodified>
<t:DateTimeSent>2014-08-10T18:34:56Z</t:DateTimeSent>
<t:DateTimeCreated>2014-08-10T18:35:12Z</t:DateTimeCreated>
<t:DisplayCc />
<t:DisplayTo>Service Desk</t:DisplayTo>
<t:HasAttachments>false</t:HasAttachments>
<t:Culture>de</t:Culture>
<t:EffectiveRights>
<t:CreateAssociated>false</t:CreateAssociated>
<t:CreateContents>false</t:CreateContents>
<t:CreateHierarchy>false</t:CreateHierarchy>
<t:Delete>true</t:Delete>
<t:Modify>true</t:Modify>
<t:Read>true</t:Read>
</t:EffectiveRights>
<t:LastModifiedName>Thomas Göttl</t:LastModifiedName>
<t:LastModifiedTime>2014-08-10T18:35:12Z</t:LastModifiedTime>
<t:Sender>
<t:Mailbox>
<t:Name>Thomas Göttl</t:Name>
</t:Mailbox>
</t:Sender>
<t:IsReadReceiptRequested>false</t:IsReadReceiptRequested>
<t:ConversationIndex>Ac+0ycOTmfHK8XrvSM2ftu9rcjREeg==</t:ConversationIndex>
<t:ConversationTopic>Test 1</t:ConversationTopic>
<t:From>
<t:Mailbox>
<t:Name>Thomas Göttl</t:Name>
</t:Mailbox>
</t:From>
<t:InternetMessageId><[email protected]></t:InternetMessageId>
<t:IsRead>false</t:IsRead>
<t:ReceivedBy>
<t:Mailbox>
<t:Name>Service Desk</t:Name>
</t:Mailbox>
</t:ReceivedBy>
<t:ReceivedRepresenting>
<t:Mailbox>
<t:Name>Service Desk</t:Name>
</t:Mailbox>
</t:ReceivedRepresenting>
</t:Message>
</t:Items>
</m:RootFolder>
</m:FindItemResponseMessage>
</m:ResponseMessages>
</m:FindItemResponse>
</s:Body>
</s:Envelope>
</Trace>
and the one before:
EwsResponseHttpHeaders: <Trace Tag="EwsResponseHttpHeaders" Tid="1" Time="2014-08-10 18:38:52Z">
200 OK
Transfer-Encoding: chunked
Content-Encoding: gzip
Vary: Accept-Encoding
Persistent-Auth: false
Cache-Control: private
Content-Type: text/xml; charset=utf-8
Date: Sun, 10 Aug 2014 18:38:51 GMT
Server: Microsoft-IIS/7.5
WWW-Authenticate: Negotiate oYGyMIGvoAMKAQChCwYJKoZIgvcSAQICooGaBIGXYIGUBgkqhkiG9xIBAgICAG+BhDCBgaADAgEFoQMCAQ+idTBzoAMCAReibARqZCLk7OlBLjMLGg8XtQO+mutKfYPyK2jeJ2B+wq9raDj1chIZkQT0/72YftQJfdtu1DwfzmlEz8kDSD7ElFT2nF/T5LMDIMT4EpLJALsGQPTec86ubSbl1dKsIZn09qdoGDg5tGxV0bwOSg==
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
</Trace>
the one before:
EwsRequest: <Trace Tag="EwsRequest" Tid="1" Time="2014-08-10 18:38:51Z" Version="14.03.0067.001">
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:m="http://schemas.microsoft.com/exchange/services/2006/messages" xmlns:t="http://schemas.microsoft.com/exchange/services/2006/types" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
<t:RequestServerVersion Version="Exchange2007_SP1" />
<t:TimeZoneContext>
<t:TimeZoneDefinition Id="W. Europe Standard Time" />
</t:TimeZoneContext>
</soap:Header>
<soap:Body>
<m:FindItem Traversal="Shallow">
<m:ItemShape>
<t:BaseShape>AllProperties</t:BaseShape>
</m:ItemShape>
<m:IndexedPageItemView MaxEntriesReturned="1" Offset="0" BasePoint="Beginning" />
<m:Restriction>
<t:And>
<t:IsEqualTo>
<t:FieldURI FieldURI="message:IsRead" />
<t:FieldURIOrConstant>
<t:Constant Value="false" />
</t:FieldURIOrConstant>
</t:IsEqualTo>
<t:IsEqualTo>
<t:FieldURI FieldURI="item:ItemClass" />
<t:FieldURIOrConstant>
<t:Constant Value="IPM.Note" />
</t:FieldURIOrConstant>
</t:IsEqualTo>
</t:And>
</m:Restriction>
<m:ParentFolderIds>
<t:DistinguishedFolderId Id="inbox" />
</m:ParentFolderIds>
</m:FindItem>
</soap:Body>
</soap:Envelope>
</Trace>
the one before:
EwsRequestHttpHeaders: <Trace Tag="EwsRequestHttpHeaders" Tid="1" Time="2014-08-10 18:38:51Z">
POST /EWS/Exchange.asmx HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/14.03.0067.001
Accept-Encoding: gzip,deflate
</Trace>
the one before (xxx for our Domain):
Exchange Connector: Autodiscovered URL: https://sv-exchange01.xxx.intra/EWS/Exchange.asmx
Is there something we missed? -
The issue: Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes. Finally Fixed!!!
SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
The cause: It is now clear what caused this problem. For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.). In May 2012 I decided to make some of them one hour events so I could add alerts to remind me of the event. I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
The symptom: Syncing stopped working for the calendar but continued working for contacts and notes. I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious.
The failed attempts: I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance. From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012. Events before May were in both Outlook and the iPhone but events after May were only one or the other. Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious. MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things. We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
The fix: After 18 months of frustration, MANY hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync problem and it indicated all day events were related. I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events, sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync. It synced for the first time in 18 months!
Problem occurred May 2012 – fixed Nov 2013Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
It will recursively remove all '_ModGrp...' folders
Sub RemoveFolders_Click()
Dim oOutlook As Outlook.Application
Set oOutlook = New Outlook.Application
Set objNameSpace = oOutlook.GetNamespace("MAPI")
Call CleanFolders(objNameSpace.Folders)
End Sub
Sub CleanFolders(objFolders As Outlook.Folders)
For i = objFolders.Count To 1 Step -1
If Left(objFolders(i).Name, 7) = "_ModGrp" Then
objFolders.Remove( i )
Else
If Not objFolders(i).Folders Is Nothing Then
Call CleanFolders(objFolders(i).Folders)
End If
End If
Next i
End Sub -
Manually adding AD user or Group mail address in SCSM 2012 R2 Configuration item
Hi ,
Since in our AD environment some of the AD user's mail Id attribute is null, I added the
smtp mail Address value in SCSM 2012 R2 user configuration item ,
After the AD connector synchronization, the manually entered mail Id is removed. I have also checked the property
do not write null values for the property not set in AD in the Connector properties
But still , the manually entered mail id is removed by SCSM
so is it not the correct way to add mail id manually ???
Any suggestions???
The mail Id property is required for mail notification feature in our environmentthe long and short of this is that the AD connector is behaving as designed and correcting values in SCSM from the authoritative source in AD.
The connector should not be blanking values with that checkbox set. are you sure AD is actually
Null, and not either an empty string or white-space characters? Can you reproduce this with other users? Might be worth reporting this if there is actually a bug in the connector.
Why wouldn't you set the Mail attribute in AD? there isn't any good reason for this to be null. -
Hi All,
My environment details:
SCSM 2012 R2
SCCM 2012 R2 connector configured
When I looked into the event viewer , I find the following error occurring continuously while the SCCM 2012 synchronization
Error Event 26319
An exception was thrown while processing ProcessDiscoveryData for session ID uuid:xxxxx
Exception message: The relationship source specified in the discovery data item is not valid.
Relationship source ID: xxxx
Rule ID: xxxxxx
Full Exception: Microsoft.EnterpriseManagement.Common.DiscoveryDataInvalidRelationshipSourceException: The relationship source specified in the discovery data item is not valid.
This error is accompanied by the below warning
Event:34113
Connector SCCM Connector -Primary Site
Error writing changes to entity of type Microsoft.Windows.Peripheral.LogicalDisk with DisplayName XXXXXXX
Message: The relationship source specified in the discovery data item is not valid.
Relationship source ID: XXXXXXX
Rule ID: XXXXXXX
If this error occurs with every synchronization, examine view Cached_CMv5_LogicalDisks for correctness or the schema for type Microsoft.Windows.Peripheral.LogicalDisk in management pack Microsoft.Windows.Peripheral.Library.
Event:33333
Data Access Layer rejected retry on SqlError:
Request: p_RelationshipDiscovered -- (RelationshipId=f449d88a-ecbf-5b16-40be-c085391a6380), (SourceEntityId=ccdf084d-254f-0ad4-ba2e-189b75ff109a), (TargetEntityId=07734206-0880-a4ec-a638-df20ccbdcbaf), (RelationshipTypeId=e4c6f8ce-0763-51c6-6421-c424a93a1eb6),
(DiscoverySourceId=df6eae9f-f14f-4e6e-9f3c-c1effa193fbe), (HealthServiceEntityId=34b1c704-120c-1175-9fe3-411e2c0aac30), (PerformHealthServiceCheck=False), (TimeGenerated=09/01/2015 04:15:26), (SourceEntityLastModified=), (IsRelationshipAlreadyDiscovered=False),
(RelationshipInserted=False), (LastModified=), (ChangeId=), (RETURN_VALUE=1)
Class: 16
Number: 777980002
Message: The specified relationship doesn't have a valid source.
From the events, it is clear that the problem is with SCCM connector and in the warning it mention to check the management pack ,
Microsoft.Windows.Peripheral.Library
whether need to update any MP ??
I tried to resolve this, but ended up in aforum which suggested to do a restart of server .But since it is Prod , restart will not be easy.
If any suggestions , it will be good to resolve this
Thank youHi,
Please install UR3 and check the result:
Update Rollup 3 for System Center 2012 R2 Service Manager
http://support.microsoft.com/kb/2962041
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Hello folks!
Im setting up a lab environment. I have installed SCSM DW and console, did pritty much what Carol did in this blogpost:
http://www.wapshere.com/missmiis/installing-reporting-for-fim-r2
At the stage where Im gonna add FIM Reporting I get a error saying I have to install the KB2561430. This i apparently a hotfix for SCSM 2010 SP1. So, Im not able to install this hotfix in my environment since im running SCSM 2012.. Any ideas ? Im stuck.
Regards, RemiWhen you install FIM Reporting on a new server that has Service Manager 2012 SP1
installed, follow these steps:
Install the FIM 2010 R2 SP1 FIMService component. To do this,
clear the Reporting check box.
Upgrade the FIMService installation to build 4.1.3451.0.
Run the change-mode installation for the FIMService, and then
add Reporting.
http://blogs.technet.com/b/steady/archive/2013/06/12/fim-2010-r2-sp1-reporting-failure-scsm-2012-sp1-you-must-apply-patch.aspx
Cordialement, Best Regards, مع أجمل تحياتي ESSALIFI Mohamed Faiçal [MCT-MCSE]. If your question is answered please mark the response as the answer so that others can benefit. -
I am running into the below issue. I am installing FIM 2010 R2 SP1 Reporting with SCSM 2012 [SCSM successfully installed].
FIM R2 Reporting installation is failing with both Wizard and Command line.
Command line captures below error: Can some one help on this?
Calling custom action Microsoft.IdentityManagement.SharePointCustomActions!Microsoft.IdentityManagement.ManagedCustomActions.SharepointCustomActions.DoesWebsiteOrSolutionPackExist
Property name = 'SHAREPOINT_URL', value = 'http://myurl.
Property name = 'UILevel', value = '2'.
CustomAction CheckFIMWebSiteorSolutionPackExisting returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 0:27:20: CheckFIMWebSiteorSolutionPackExisting. Return value 3.
Action ended 0:27:20: INSTALL. Return value 3.
In below link, the above question is unanswered. Kindly help.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/37b1af85-aef0-422b-9417-7364d51d0df4/installing-fim-reporting-in-fim-2010-r2-with-sp1?forum=systemcenterservicemanagerHi All,
Though we use SCSM 2012, the FIM 2010 Reporting (R2 SP1) installation throws the alert to run
KB2561430 hotfix (when run throght console) and above error (when run through commnad line).This is actually a bug and MS have fixed that in one of its FIM hotfix rollup. I could move out of the above error by applying the FIM hotfix mentioned
in the below link.
http://blogs.technet.com/b/steady/archive/2013/06/12/fim-2010-r2-sp1-reporting-failure-scsm-2012-sp1-you-must-apply-patch.aspx
Aswathy Raj -
SCSM 2012 - Problems running script in custom workflow
Hi all,
I'm trying to create a custom workflow in the Authoring Tool that will send an email when a ticket in certain queues is unassigned, but I only want this to run during business hours. I've created the PowerShell script, and it runs great on its own.
However, whenever I try to add any kind of scripting event to a custom workflow, the workflow fails:
Microsoft.EnterpriseManagement.Common.InconsistentDataException: The requested objects had an unknown management pack. ---> Microsoft.EnterpriseManagement.Common.InconsistentDataException: The call produced inconsistent results. The data on the client
does not match the data returned from the server. The most likely cause is that client-side cache is out of sync with server data. ---> Microsoft.EnterpriseManagement.Common.ObjectNotFoundException: An object of class ManagementPack with ID %GUID% was not
found...
If I create and import a management pack with an empty workflow, the workflow succeeds. If I use the "Add AD DS User to Group", the workflow succeeds. But as soon as I add a scripting event, the workflow fails.
For testing, I added a PowerShell event with this code:
$a=1
I also added a Command Script event with this code and got the same error as above: ping SomeServer
I even tried a VBScript, but that caused the workflow to not run at all:
dim someVariable
someVariable = "some value"
I then disabled the VBScript activity and the workflow runs successfully.
I'm running SCSM 2012 SP1 with UR4. I am copying the .dll file into the SCSM installation directory (which is not in the default location). The GUID referenced in the error code is the GUID for my custom MP.
This is my first time creating a custom workflow in the Authoring Tool. Can you tell me what I'm missing? Please let me know if you need any more information
Thanks!
MarnieThanks, Anders. I had seen that issue in my searches on this problem. I had tried both the manual fix suggested in that post as well as upgrading to UR4 (so I'm on on SP1 UR4). Neither approach made any difference.
Am I supposed to do anything with the .cs, .xoml, and .xomlx files that also get generated? I noticed that if I move ALL the associated files into the install directory (not just the .dll file), then import the MP, I get a different error. Instead of the
MP being missing, the error is now:
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ServiceManager.WorkflowAuthoring.ActivityLibrary.WindowsPowerShellScript.Activity_Closed(Object sender, ActivityExecutionStatusChangedEventArgs e)
at System.Workflow.ComponentModel.ActivityExecutorDelegateInfo`1.ActivityExecutorDelegateOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
This makes it seem like I do need to move ALL the files to the install directory, but maybe now the workflow just doesn't like my code?
Thanks!
Marnie -
Does SCSM 2012 R2 supports reporting in fim 2010 r2?
Hi Everyone,
I have a scenario where i am configure fim reporting with SCSM and i have the fim version of 2010 r2 and scsm 2012 r2 ?It would be great if u provide me the information
I have ran the powershell script on on datawarehouse successfully
I have ran the initial sync and incremental sync successfully
while running ETL script of Add Snapins its tell me this is not installed on the machine i am still seeking an answer to fix this issue?
Your response is highly appreciated.
Thanks,
Aman KhannaAccording to, http://technet.microsoft.com/en-us/library/jj863245%28v=ws.10%29.aspx, this is the latest support wrt SCSM:
System Center 2012 Service Manager with Windows Server 2008 and SQL Server 2008
Although its not specifically listed below, can we deduce SCSM 2012 R2 will be supported by MIM 2015?
http://blogs.technet.com/b/ad/archive/2014/11/18/microsoft-identity-manager-preview-release-1-is-now-available.aspx
Maybe you are looking for
-
My macbook pro cannot connect to the app store is there anyway of fixing this?
my macbook pro cannot connect to the app store does anyone know how to fix this?
-
PLS-00306: wrong number or types of arguments in call in a for loop
Dear all I recently put up another post about the same error message but as the message now relates to another part of my programme and, in my mind at least, a different conceptual idea, I thought I should start a new top. If that is not right thing
-
Can a pdf file be projected from my macbook pro
Is it possible to project a PDF file onto a screen from my Macbook Pro?
-
Published site slight different
When publishing my site to a folder on my computer it looks slightly different to how it does in iWeb. Some text is underlined and the alignment is not quite how it should be. This isn't a problem with hosting the site on the net, it's something to d
-
How to insert records from form to database?
Hi all, i manage to make a connection from my form in adobe designer 7 to my database Oracle 9i, now i want to add some buttons to the form and navigate, delete or add data from my form to the database, anyone has ideas to accomplish this?, i made a