SCSM 2012 Moving Reporting to new Reporting Server

is there any step by step procedure to move the scsm reporting to a new report server?
Georges Mouawad
Jreij12

Hi,
this link shows how to update the connection strings of the DataSources on the report server.
I did the migrating of the report server from a server to another.
I'll write a step by step procedure as soon as possible.
Anyway thank you Roman
My Best Regards
Jreij12

Similar Messages

Issue when Bursting reports via new Precalculation Server

Hello,
We are trying to migrate away from our unsupported 720 installation of the SAP Precalculation software to a new Precalculation Server running the latest versions. We’ve overcome a number of issues and we can successfully Broadcast using the new server but we are encountering problems
with bursting.
The Bursts have been running successfully on the old 720 server, so we know that the BW side must be fine which suggests the problem is with the Precalculation server. We have been through the Precalculation checklist and the servers appears to have been built successfully. The Precalculation and Business Explorer software has been patched to the latest version and it’s running Excel 2013.
The main error message we are seeing is “The RPC server is unavailable” HRESULT: 0x800706BA.
A Screen shot showing the error in RSRD_LOG is shown in the attached document.
Below is an extract from the Log of the Precalc server showing this error, just before the RPC Server is unavailable message it states
Error occured on closing opened workbooks.
|ZPREC730_1:9/3/2014 2:10:20 PM.777 (0) -> Refresh
BExAnalyzer.xla!MenuRefreshPrecalc failed 1 time(s |
|). BExAnalyzer.xla!MenuRefreshPrecalc failed 1 time(s
|
|ZPREC730_1:9/3/2014 2:10:25 PM.785 (0) -> Calling refresh
BExAnalyzer.xla!MenuRefreshPrecalc
|
|ZPREC730_1:9/3/2014 2:10:25 PM.785 (0) -> Refresh
BExAnalyzer.xla!MenuRefreshPrecalc failed 2 time(s |
|
|). BExAnalyzer.xla!MenuRefreshPrecalc failed 2 time(s
|
|ZPREC730_1:9/3/2014 2:10:30 PM.792 (0) -> Calling refresh BExAnalyzer.xla!MenuRefreshPrecalc        |
|
|ZPREC730_1:9/3/2014 2:10:30 PM.792 (0) -> Refresh
BExAnalyzer.xla!MenuRefreshPrecalc failed 3 time(s
|
|). BExAnalyzer.xla!MenuRefreshPrecalc failed 3 time(s                                                |
|
|ZPREC730_1:9/3/2014 2:10:35 PM.800 (0) -> Calling refresh
BExAnalyzer.xla!MenuRefreshPrecalc
|
|ZPREC730_1:9/3/2014 2:10:35 PM.800 (0) -> Refresh
BExAnalyzer.xla!MenuRefreshPrecalc failed 4 time(s |
|
|). BExAnalyzer.xla!MenuRefreshPrecalc failed 4 time(s
|
|ZPREC730_1:9/3/2014 2:10:40 PM.808 (0) -> Calling refresh
BExAnalyzer.xla!MenuRefreshPrecalc
|
|ZPREC730_1:9/3/2014 2:10:40 PM.808 (0) -> Refresh BExAnalyzer.xla!MenuRefreshPrecalc
failed 5 time(s |
|
|). BExAnalyzer.xla!MenuRefreshPrecalc failed 5 time(s
|
|ZPREC730_1:9/3/2014 2:10:45 PM.815 (0) -> Refresh
BExAnalyzer.xla!MenuRefreshPrecalc returned with 0 |
|
|. BExAnalyzer.xla!MenuRefreshPrecalc returned with 0
|
|ZPREC730_1:9/3/2014 2:10:45 PM.815 (0) -> Error occured on closing
opened workbooks.                |
|
|ZPREC730_1:9/3/2014 2:10:45 PM.815 -> An Exception occured in thread '0':                          |
|
|ZPREC730_1:The RPC server is unavailable. (Excepti on from HRESULT:
0x800706BA)                      |
|
|ZPREC730_1:System.Runtime.InteropServices.COMExcep tion (0x800706BA):
The RPC server is unavailable. |
|
|(Exception from HRESULT: 0x800706BA) tion (0x800706BA): The RPC server
is unavailable.              |
When this error occurs an error is reported in the Event Viewer on the server
Faulting application name: EXCEL.EXE, version: 15.0.4535.1507, time stamp: 0x52282875
Faulting module name: EXCEL.EXE, version: 15.0.4535.1507, time stamp: 0x52282875
Exception code: 0xc0000005
Fault offset: 0x005b447e
Faulting process id: 0x%9
Faulting application start time: 0x%10
Faulting application path: %11
Faulting module path: %12
Report Id: %13
We have the latest 730 patches installed on the Precalculation and Business Explorer software. We are running Excel 2013 (32bit) on a Virtual Machine running Windows 2008 R2.
If you have any suggestions on how to resolve this problem I'd be delighted to hear from you!
Many thanks,
Mark

Hi,
There is no easy fix for this. Please go through the precalc check list which should solve the issue:
Checklist for Precalculation Server - SAP NetWeaver Business Warehouse - SCN Wiki
Regards,
Michael

Taking old report even new report is uploaded on web - Cache problem?

Hello,
I have a problem. We are using remote server for development work.
We are working on web environment. The modules (forms & reports) will be uploaded to the unix server using web compilation links. Now I haveI uploaded (generate), a report (old) to the server. After some modifications new report is uploaded . When I run the report, it is always taking old one, instead of new.
Time stamp in the server is showing new one is uploaded.
I heard this could be because of cache problem on the server. If some one have faced the same , please let me know the solution for this?
Cheers
Ram Kanala

FRM-40738 (repid is coming out null)
Looks like here it is not able to find the report
repid := find_report_object('ETOX_9ITEST');
In Forms builder confirm that you have defined a report by this name for the particular form (adding the report in REPORTS_PATH would not suffice). I think it should also point to corresponding report.
Please post the exact error messages as you see it with the error numbers.
Other comments.
2) Added a TNS_ADMIN in the registry to point to TNSNAMES.ORA in the apps directory. This Tnsnames.ora has an entry for report server name. The report server is up when seen in OEM console. But my report does not launch. <<For 9i you do not need to do this . This alias defining is for 6i. In 9i it is "auto discovery" in the subnet.
You can remove this. (You need Tnsnames.ora for DB aliases, I am talking about reports server...)
3) Same comment as above
8)Verify the Reports 9i Service properties and check the "Log On as" information. Be sure to specify on "This account" the user information with which the installation was made.
For Windows/2000:
- Start-> Settings-> Control Panel-> Administrative Tools-> Services
- Double click on the Reports Server
- Go to "Log On" tab
- Change on the "Log On As" section to "This account" and enter the userid/password of the
user that installed Reports Server
- Ensure that the user account where the Reports Server is installed has administrator privileges
and a default printer.
- Restart the Reports Server as the new user.
(For WinNT steps will be similar)
---Workaround till your issue is solved is ....
Start report server as a standalone server
rwserver server=server_name
Thanks
Ratheesh

Report Generation: New Report.vi

Running applicaion in development mode works fine.
After compiling however I get Error 7: Open VI Reference in New Report.vi
Why am I getting this error?

Has the version of Office on your machine changed since you installed the Report Generation Toolkit? The VIs will become broken if the ActiveX interface changes, and this can happen when the Office version changes. I recommend uninstalling and reinstalling the toolkit. Also, what version of Report Generation Toolkit are you using? The latest version is 1.1.1.
-D
P.S. - I'm going to respond to your other thread that you started with a link to this one. Instead of creating multiple messages on the same question, just wait for a response to your initial thread.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Moving to a new SCVMM server and a new database without rebuilding networking on Hyper-V hosts

Environment: We currently have a single front-end SCVMM server running WS 2012 and SCVMM 2012 R2 UR2. We have 4 Hyper-V clusters that SCVMM manages. All teams and vNICs on those hosts were created by SCVMM. We are using a standard VLAN setup
(no network visualization).
Problem: We have some issues with coruption in our SCVMM database that are not fixable and have existed too long for us to restore the database from our backups. We built a new SCVMM server running WS 2012 R2 and the same version of SCVMM. We
copied over the library share contents and made equivalent entries for all aspects of networking (logical networks, VM networks, port profile, port classifications, etc.) in the new database. When I re-associate a cluster with the new SCVMM server it
imports the cluster and nodes successfully, but doesn't understand that the logical switches created by the old SCVMM server are in fact logical switches. It sees them as standard switches.
Essentially, my question is how do you move between two separate SCVMM environments without rebuilding all your network configuration from scratch?

Since your source and target platform all little ENDIAN format. Cold copy from OS level is fastest and easiest way.
If you plan to reorg the tablespace along the way, you have to do export/import, use data pump since you are on 10g.

Moving PO to new Linux server from Netware 6.5

We have the latest version of Novell Data Synchronizer. What is the procedure to update the Novell Data Synchronizer server with the new server? Is it just as simple as updating the IP address of the new Linux server hosting the new PO? Anyone do this yet?

aporzec,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Copying Report Painter report to new report

Hi all,
We are having a report painter program. I have to enhance that report. I want to add one more output column to that report.
So, I'm trying to copy the existing one and trying to make changes. I'm new to this report painter concept.
Can anybody let me know how to Insert a new filed and where to change the logic to retrieve the data for this new field.
Thanks in advance

hi,
you will have to debug the code.
and then find the appropriate place where you can code acc to your requirement.

Unable to connect to XL Reporter. Error! Server communication failed!

Hi Experts,
I am receiving the following error when starting XL Report in SAP
The VB Application identified by the event source logged this Application XL Reporter: Thread ID: 4232 ,Logged: Server sap01
The connect information provided in MetaInfo.xml is wrong.
(Please contact the administrator to run ChangeDbPassword)
Details: ixOpen - Microsoft OLE DB Provider for SQL Server (-2147217843)
Login failed for user 'sa'.
Can't connect to database Provider=SQLOLEDB.1;Data Source='sap01';Initial Catalog='SBO-COMMON';User ID='sa';Password=*****
SYSTEM INFORMATION:
>>SAP 2007A SP01 PL06
>>Windows XP SP3, Windows 7, Windows Server 2003 R2 >> happens on all machines
>>SQL Server 2005
>>.NET 1.1 & .NET 2.1 installed
>>MDAC 2.8 SP1 installed
THINGS I TRIED:
>>Changed sa login through XL Reporter ConnectionManager utility
--sa password works to get into SQL Server Management studio. As a test, I changed it back and fort to see if that makes a difference, but had no luck.
>>Made sure that SAP is logged into the actual server name (not local, also using sa login and not trusted connection)
>>Reinstalled SAP Client, SAP DI API, cleaned local temp folder %temp%
>>XRDBV table has SBOOEM in the Partner column
>>used SAP cleanup utility to delete bad entries from the registry (did this as a part of a reinstall process) >> based on SAP Note 1287193
Any ideas???
Thanks You!!!
Edited by: Stefan Genzor on Apr 13, 2011 12:56 AM

Hi Stefan,
We are having the same issue with a customer who has moved to a new terminal server environment. We cannot get the users to connect to the DB from there, but SAP is connecting with no issues.
We have exactly the same message & have run through the same steps.
Did you manage to get this resolved, and can you remeber how?
Thanks

Copying report file from one server to another requires refresh database?

Hi,
I am using Crystal Reports 11 for development.
We have a number of crystal reports that are served on a web server running classic ASP that uses these reports with Embedded Crystal Server XI installed on the server.
When I am developing or modifying a .rpt file (report) I connect to a UAT/development database on a dedicated development server.
When I am happy with the report and testing is successful I copy and paste the report onto the production server, replacing the old report.
The problem is I don't have a user account and password on the production server. Our DBAs are the only one with passwords on the prod servers. If an application needs a password entered they come to my desk and enter it for me.
The problem is in order for the modified report to work on the production, I have to call up a DBA to "verify the database" for me by connecting to production server and entering username and password.
This is really annoying.
Why can't I just disconnect\log off server in crystal reports, then copy and paste the .rpt file to prod server and be done with it?
If I had dozens of reports to change, it seems very rigid that I have to ask a DBA to enter the user account and password used by the application to run the report.
Can someone please explain how to be able to copy and paste modified reports/ or new reports from one server to another without having this problem.
Thanks
Haggisns

Moving to the Legacy SDK forum.
Crystal can be magical sometimes but if you don't tell CR where the database is how is it to know you moved it?
As you have seen and for security reasons you can't simply "drop" a report on any server and expect it to just connect to a new DB server without being asked to enter in credentials or that you have changed the DB server to report off of.... If it's too much work for the DBA to set log on info then he should give you access to so can.
Thank you
Don

Restoring DPMDB 2012 SP1 to a New Server

Greetings,
I am in the middle of moving primary DPM servers. This was not for the purpose of upgrading DPM. We were running DPM 2012 SP1 on Server 2012, using a remote instance of SQL 2012. Now, I am moving to a new DPM server (using DPM 2012 SP1
on Server 2012) using a local instance of SQL 2012 and trying to restore the DPMDB
Steps I have taken so far:
-Performed a backup of the DPMDB using DPMBackup. The backup completed successfully.
-Gave the new server the same name as the old server (call it DPM1)
-Gave it the same IP address
-Removed old server from AD/network
-Copied the DPMDB.bak file created by DPMBackup to the new DPM server.
-Installed SQL 2012 and updates
-Installed DPM 2012 SP1 and updates. (4.1.3417.0). I did NOT however, install DPM in the default location. I installed it to E:\Program Files\Microsoft System Center 2012...
-Attached the SAN that the old DPM server was using to the new one. All disks are intact.
My problem comes when I try to run the DPMSync.exe utility. It crashes when I type in the following command from an elevated prompt:
DPMSync -restoredb -dbloc E:\DPMDB\DPMDB.bak
I receive the following error(s):
Unhandled Exception: Microsoft.SqlServer.Management.Smo.FailedOperationException: Restore failed for Server 'DPM1\DPM'. ---> Microsoft.SqlServer.Management.Common.ExecutionFailureException:
An exception occurred while executing a Transact-SQL statement or batch. ---> System.Data.SqlClient.SqlException: Directory lookup for the file
"D:\Program Files\Microsoft SQL Server\MSSQL11.DPM\MSSQ
L\DATA\MSDPM2012$DPMDB_DPMDB.mdf" failed with the operating system error 3(The system cannot find the path specified.).
File 'MSDPM2012$DPMDB_DPM1_dat' cannot be restored to 'D:\Program Files\Microsoft SQL Server\MSSQL11.DPM\MSSQL\DATA\MSDPM2012$DPMDB_DPM1.mdf'. Use WITH MOVE to identify a valid loc
ation for the file.
Directory lookup for the file "D:\Program Files\Microsoft SQL Server\MSSQL11.DPM\MSSQL\DATA\MSDPM2012$DPMDB_DPM1_log.ldf" failed with the operating system error 3(The system cannot find the
path specified.).
File 'MSDPM2012$DPMDB_DPM1Log_dat' cannot be restored to 'D:\Program Files\Microsoft SQL Server\MSSQL11.DPM\MSSQL\DATA\MSDPM2012$DPMDB_DPM1_log.ldf'. Use WITH MOVE to identify a va
lid location for the file.
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
RESTORE DATABASE is terminating abnormally.
   at Microsoft.SqlServer.Management.Common.ConnectionManager.ExecuteTSql(ExecuteTSqlAction action, Object execObject, DataSet fillDataSet, Boolean catchException)
   at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
   --- End of inner exception stack trace ---
   at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
   at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection sqlCommands, ExecutionTypes executionType)
   at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection queries)
   at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries)
   at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
   --- End of inner exception stack trace ---
   at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
   at Microsoft.Internal.EnterpriseStorage.Dls.RestoreDbSync.RestoreDBHelper.RestoreFromBackupFile(String dbLocation)
   at Microsoft.Internal.EnterpriseStorage.Dls.RestoreDbSync.RestoreDBHelper.RestoreDb(String dbLocation)
   at Microsoft.Internal.EnterpriseStorage.Dls.RestoreDbSync.RestoreDbSync.Main(String[] args)
The bolded parts are the parts that confuse me. I never specified a restore to that location. The "D" drive is my DVD drive on the server. The only thing that I can figure is that it is trying to use the drive letter from the
old server. However, I haven't ran across any documentation when using this tool that I had to name my drives identical to the old server, just the machine name. I also named the databases the same as well. I tried specifying a database name
using -DpmDbName, but that didn't work either.
I'm certain I'm missing something, but I have no idea what it is. Any help or ideas would be appreciated. Thanks.
-Mike

Hi,
You can use SQL Management Studio to restore the database, and under the OPTIONS settings, change the path to the files. When you do the restore the files will be placed in the path specified. If you wish to overwrite the current DB
files, be sure to select the overwrite option.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Server 2012 R2 ISO download is larger than DVD, how do I install on a new physical server?

I have downloaded Server 2012 R2 (not the trial version) and the size of the ISO is 5.2Gb. I get 'disc image file is too large' error when trying to create image on DVD. How do I install 2012 R2 on a new physical server?

Does your server have an out-of-band management console? Those can generally mount virtual media that is simply a file residing on the machine you are using to connect to the console.
Another option is to use USB -
https://technet.microsoft.com/en-us/library/dn293258.aspx
. : | : . : | : . tim

Can i open a existing report using a report generation toolkit

Hello All,
Suppose I create a new excel report today and close the program, Tomorrow I open the same program and instead of creating a new excel file, i need to update the test results data into the excel file which was created yesterday, is this possible.
I am confused because there is no option called Open report in report generation toolkit, it just has create new report option.
Probably NI Guys can work on this...sorry if it is a;lready existing?
Is there any method to open a existing report?
Pls help.....
Thanks
Solved!
Go to Solution.

Hi,
I have a similar problem. I'd like to use Report Generation Toolkit to enter data into some cells in the active worksheet of the active workbook but it seems impossible?! The user has in beforehand opened the desireed workbook and activated the desired worksheet. I use the 'New Report' VI with the template input set as the path of the active workbook (some self-made ActiveX calls to get the path). When this VI is run, howevere, the excel file is sort of re-opened and another worksheet becomes the active one.
I tried to make a customized copy of New Report.vi, New Report subVI.vi and Excel_Open_Workbook.vi so that the Report object works with the currently active workbook and worksheet, but I failed due to my lack of knowledge in LV classes and such things. It would've been an ugly solution anyway to have custom low-level VIs that does not follow when the RepGen Toolkit develops in the future.
Best regards,
Andreas Nilsson

SCSM 2012 - Self Service Portal installation Error

Hi Everyone,
I am trying to update SCSM 2010 with 2012. So far I have successfully installed Database Server and Warehouse server, and now I am trying to install the self service portal but it is giving me an error saying "Setup has failed because of an unexpected
error. Please review C:\..\SCSMSertupWizard01.log for more details.
Here are some extra information in relation to this upgrade.
I have got 3 separate servers for my SCSM 2010 application. One act as a warehouse database server. second server holds the Service Manger Database and the third one has got Self-service portal on it.
Now as I said earlier, I did not face any issue upgrading the first two servers (warehouse and Database) but the last one is proving very difficult to just even start with.
Here is some interesting thing that is happening while I am trying to install my self service portal.
When I run the SCSM 2012 setup on my web portal server (Server 3) I get a setup screen with following option
and as I said earlier when I click this Upgrade option it starts the "requirements check" and fails just there with an error message.
Now here is the interesting thing, when I run the SCSM 2012 setup on my server 2 ( which has now got Database Server 2012 installed in it) gives me following option screen.
So when I select this option it starts to install Web content server and Sharepoint site server on my Database server. I do not want that. I want to have my web content server on Server 3 which already has SSP 2010 on it. I have also installed Sharepoint
2010 on my third server.
What is the solution here?
Do I have to merge my Database and Web content server? is it some sort of untold requirement of SCSM 2012 upgrade?
Please help me here.
Svapnil

Hi there,
thanks for the reply..
here is the screenshots of the log files.
Sorry all my 3 servers are on DMZ environment so it is bit hard for me to move files from virtual to live servers (Do not have enough permission level to do so!!)
Image No 2:
I hope this helps!!

SCSM 2012 R2: Error in DW server after moving workflows to new server

Hi
We have installed a new management server and moved to workflows to the new server, and all looks like it works ok. Then we have followed this to remove the old managment server:
http://marcelzehner.ch/2012/08/01/dealing-with-multiple-management-servers-33-decommission-old-management-servers/
tBut in the data warehouse Operations Managerlog we see: Error 33546 MP Sync failed to connect to Data Access on the machine <name of old managment server>.
Someone know how to fix this?
Please advice
jon

Hi,
You may refer to the below links to unregister the DW by using command Unregister-SCDWSource:
http://technet.microsoft.com/en-us/library/hh541728(v=sc.20).aspx
In addition, here is a blog to troubleshoot data warehouse issue:
http://blogs.msdn.com/b/scplat/archive/2010/06/07/troubleshooting-the-data-warehouse-an-overview.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

SCSM 2012 - Adding Action Log to Microsoft SQL Server Report - Your Urgent help would be really appreciated

Hopefully a straight forward yes or no question.
Is it possible to add action logs to a report? either a report from a cube or a report from SQL Report Builder?
My understanding is that the action log information is not transferred to the database, therefore I presume you cannot get this into a cube report of SQL report - is my understnading correct?
tamrep

Hi,
Rob Ford made a contribution
here for a similar task.
Cheers,
Marat
Site: www.scutils.com Twitter:
LinkedIn:
Graveyard:

SCSM 2012 Moving Reporting to new Reporting Server

Similar Messages

Maybe you are looking for