SCSM 2012 R2 Authoring Tool Setup Error "An error occured while executing a custom action:_RegMainEditorPackage"
Screenshot:
Setup Log:
Property(S): ProductToBeRegistered = 1
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 1708
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 2205 2: 3: Error
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1708
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 2205 2: 3: Error
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI (s) (8C:BC) [10:55:05:914]: Product: Microsoft System Center 2012 R2 Service Manager Authoring Tool -- Installation failed.
MSI (s) (8C:BC) [10:55:05:914]: Windows Installer installed the product. Product Name: Microsoft System Center 2012 R2 Service Manager Authoring Tool. Product Version: 7.5.3079.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation
success or error status: 1603.
MSI (s) (8C:BC) [10:55:05:918]: Deferring clean up of packages/files, if any exist
MSI (s) (8C:BC) [10:55:05:918]: MainEngineThread is returning 1603
MSI (s) (8C:78) [10:55:05:920]: RESTART MANAGER: Session closed.
MSI (s) (8C:78) [10:55:05:920]: No System Restore sequence number for this installation.
=== Logging stopped: 2/27/2014 10:55:05 ===
MSI (s) (8C:78) [10:55:05:921]: User policy value 'DisableRollback' is 0
MSI (s) (8C:78) [10:55:05:921]: Machine policy value 'DisableRollback' is 0
MSI (s) (8C:78) [10:55:05:921]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (8C:78) [10:55:05:921]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:78) [10:55:05:921]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:78) [10:55:05:922]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (8C:78) [10:55:05:922]: Restoring environment variables
MSI (s) (8C:78) [10:55:05:922]: Destroying RemoteAPI object.
MSI (s) (8C:9C) [10:55:05:922]: Custom Action Manager thread ending.
MSI (c) (E4:DC) [10:55:05:923]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E4:DC) [10:55:05:924]: MainEngineThread is returning 1603
=== Verbose logging stopped: 2/27/2014 10:55:05 ===
I am trying to install on Windows 7 Ent. and Windows 2012 (both attempts fail with same error).
The VS 2008 shell piece was installed, however, as others have experienced the prereq check issue, I removed it from the input file in the setup folder, which resolved that piece.
Any suggestions?
Thank you.
Regards, Zoeb Khan
When installing the VS Isolated Shell, make sure the actual binaries (found on the root drive or where you extract the web installer) are installed. This will resolve the above error and also the Prerequisite issue that a lot of people are coming across.
Regards, Zoeb Khan
Similar Messages
-
Error:
Configure Portal Setup
An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
Errors in the Log:
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
Any ideas?
David BaurI finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
David Baur -
I'm installing the SCSM2012 Management Server
component on a SQL dev box. During the installation, the very last step (Import Management Packs) fails with this error:
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
I've already verified that the account I'm logged in with has SA access to the SQL database. Windows 2008 R2 firewall is turned off.....
Has anybody else run into this problem?I don't see anything indicative in the setup log. The setup seems to get all the way to the part where it installs the management packs. Then right after that is when the installation fails and it rolls back.
From the setup log, towards the end:
Property(S): ACTIONSUSER = NETWORK SERVICE
Property(S): ACTIONSDOMAIN = NT AUTHORITY
Property(S): ACTIONSUSER_FOR_DB = NETWORK SERVICE
Property(S): ACTIONSDOMAIN_FOR_DB = NT AUTHORITY
Property(S): SOURCEDIR = C:\SCSM\SCSM2012_Beta\Setup\Server\
Property(S): SourcedirProduct = {295201AE-EAB6-416C-8252-7C065243EF55}
Property(S): ProductToBeRegistered = 1
MSI (s) (9C:54) [17:33:22:951]: Note: 1: 1708
MSI (s) (9C:54) [17:33:22:951]: Product: Microsoft System Center Service Manager 2012 -- Installation failed.
MSI (s) (9C:54) [17:33:22:959]: Windows Installer installed the product. Product Name: Microsoft System Center Service Manager 2012. Product Version: 7.5.1354.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
1603.
MSI (s) (9C:54) [17:33:23:010]: Deferring clean up of packages/files, if any exist
MSI (s) (9C:54) [17:33:23:013]: MainEngineThread is returning 1603
MSI (s) (9C:20) [17:33:23:061]: RESTART MANAGER: Session closed.
MSI (s) (9C:20) [17:33:23:061]: No System Restore sequence number for this installation.
=== Logging stopped: 11/7/2011 17:33:22 ===
MSI (s) (9C:20) [17:33:23:065]: User policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Machine policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (9C:20) [17:33:23:065]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:066]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:067]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (9C:20) [17:33:23:067]: Restoring environment variables
MSI (s) (9C:20) [17:33:23:089]: Destroying RemoteAPI object.
MSI (s) (9C:28) [17:33:23:089]: Custom Action Manager thread ending.
MSI (c) (C8:B4) [17:33:23:144]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C8:B4) [17:33:23:175]: MainEngineThread is returning 1603
=== Verbose logging stopped: 11/7/2011 17:33:23 === -
An error occurred while executing a custom action:_PopulateUserRoles
I am trying to install Service Manager 2012 RTM onto a brand new server 2008r2. The purpose is to replace the other Data Management server that is giving me problems upgrading to service pack1. I go through the setup and connect to the SQL server and
the database that has my existing DM. I am using the same credentials and everything is the same. It goes all the way to the end and I get an error :
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this rollAfter this error, I reran setup and used the domain admin account instead of the Service Manager Admins group I created in AD. The error did not happen again, but I did get the "Setup cannot complete - RollbackCleanup"
error. This was fixed by following this link: "http://www.cireson.com/scsm/scsm-an-error-occurred/" and this MS article: "http://support.microsoft.com/kb/922918/en-us".
These are the steps (I had to create the DWORD 32 bit):
Click Start, click Run, type regedit, and then click
OK.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
On the Edit menu, point to
New, and then click DWORD Value.
Type ServicesPipeTimeout, and then press ENTER.
Right-click ServicesPipeTimeout, and then click Modify.
Click Decimal, type 60000, and then click
OK.
This value represents the time in milliseconds before a service times out.
Restart the computer.
Hope this helps!
BR,
Robert
Robert -
An error occurred while executing a custom action:_CreateMOMRegKey
It occurs during the "Configuring Reporting" portion of the install. This is an install using an existing database and the error seems to occur as it is trying to access that database during the Reporting portion of the install. I have included
the portion of the log file where it fails to speed things along. I have looked at all of the advice on the forums and I am completely lost at this point.
"MSI (s) (3C:3C) [10:34:28:882]: NOTE: custom action _CreateMOMRegKey unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _CreateMOMRegKey returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (3C:4C) [10:34:28:964]: User policy value 'DisableRollback' is 0
MSI (s) (3C:4C) [10:34:28:964]: Machine policy value 'DisableRollback' is 0
Action ended 10:34:28: InstallFinalize. Return value 3.Validate that the installation account and SSRS account defined during the installer has access to the location where the Report Server Database is stored. Also recommend deleting the keys below for the failed installation.
HKLM\Software\Microsoft\Microsoft Operations Manager
and
HKLM\Software\Microsoft\System Center
Systems Engineer -
I uninstalled a previous installation of SCSM 2012 in our lab environment because the person who installed it is didn't give anyone else permissions and they weren't available to make the change. Since then, I've tried to install SCSM 2012 multiple
times and it fails every time during the Finalize step with the error shown in the picture below.
Things I've tried and double checked:
I am running the install with a domain admin account
I'm specifying a domain user service account during install which is local administrator on the machine
I rebuilt the performance counters
I'm running SQL 2k8 R2 SP2
.Net 3.5.1 is installed
I see the following message in the System Event Log during setup:
Event 7036 - The System Center Data Access Service service entered the running state.
Event 7031 - The System Center Data Access Service service terminated unexpectedly.
It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
It appears as though this happens 18 times before the service is no longer restarted and is left terminated.
Any thoughts or help on how to get this to work would be greatly appreciated! Log excerpts are below as well as a link to the full log file at the end.
Chris
Errors in the log that make me go "hmm…"
I changed my domain and username in the logs to "DOMAIN" and "user" respectively.
MSI (s) (74!94) [10:29:06:718]: Note: 1: 2711 2: MOMServer
Action start 10:29:06: _SetHealthServiceConfig.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMServer
MSI (s) (74!94) [10:29:06:719]: Note: 1: 2711 2: MOMGateway
SetHealthServiceConfig: Failed to get Feature State.. Error Code: 0x80070646. MOMServer
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMGateway
MSI (s) (74:04) [10:49:58:011]: Executing op: ActionStart(Name=_ExecuteSqlScripts,Description=Configuring Database,Template=[1])
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2769. The arguments are: _MPProcessorDeferred, 9923,
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.RegisterSdkSCP
RegisterSdkSCP: Old serviceConnectionPoint found
RegisterSdkSCP: Deleting existing serviceConnectionPoint
RegisterSdkSCP: Warning: Dont have access to delete existing serviceConnectionPoint
RegisterSdkSCP: Creating New serviceConnectionPoint
RegisterSdkSCP: Adding ACL for current user: DOMAIN\account
RegisterSdkSCP: Adding ACL for SM Admini: DOMAIN\SCSM Admins
RegisterSdkSCP: Error: The object already exists.
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.WaitForSDKServiceStart
WaitForSDKServiceStart:Entering
WaitForSDKServiceStart:Sleeping for SDK to start 0 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 10 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 20 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 30 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 40 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 50 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 60 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 70 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 80 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 90 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 100 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 110 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 120 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 130 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 140 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 150 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 160 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 170 seconds
WaitForSDKServiceStart: SDK Service connect error, after 3 mins, fail this function
MSI (s) (74:40) [10:56:20:397]: NOTE: custom action _WaitForSDKServiceStart unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that
handle.
CustomAction _WaitForSDKServiceStart returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (74:04) [10:56:40:799]: Executing op: CustomActionRollback(Action=_RollBack_UninstallHealthServicePerfCountersForUpgrade.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,ActionType=3393,Source=BinaryData,Target=InstallHSPerfCounters,CustomActionData=C:\Program
Files\Microsoft System Center 2012\Service Manager\)
MSI (s) (74:38) [10:56:40:801]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI62BF.tmp, Entrypoint: InstallHSPerfCounters
InstallHSPerfCounters: Custom Action Data. C:\Program Files\Microsoft System Center 2012\Service Manager\
InstallHSPerfCounters: Installing agent perf counters.
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallHSPerfCounters: Failed to install agent perf counters. Error Code: 0x80070057.
MSI (s) (74:04) [10:57:10:844]: I/O on thread 2752 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:844]: I/O on thread 4796 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:844]: I/O on thread 4928 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 4612 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 884 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 2600 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 1884 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 4872 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 3084 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 4920 could not be cancelled. Error: 1168
MSI (s) (74!E0) [10:57:10:846]: Product: Microsoft System Center 2012 - Service Manager -- The installer has encountered an unexpected error installing this package. This may indicate a problem with
this package. The error code is 25211. The arguments are: -2147024809, The parameter is incorrect.,
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211. The arguments are: -2147024809, The parameter is incorrect.,
CustomAction _RollBack_UninstallHealthServicePerfCountersForUpgrade.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 returned actual error code 1603 but will be translated to success due to continue marking
MSI (s) (74:04) [10:57:17:154]: Note: 1: 1708
MSI (s) (74:04) [10:57:17:154]: Product: Microsoft System Center 2012 - Service Manager -- Installation failed.
MSI (s) (74:04) [10:57:17:155]: Windows Installer installed the product. Product Name: Microsoft System Center 2012 - Service Manager. Product Version: 7.5.2905.0. Product Language: 0. Manufacturer:
Microsoft Corporation. Installation success or error status: 1603.
Full log file:
https://skydrive.live.com/redir?resid=F723C571E9E6D51F!1414&authkey=!ACisfvqIpGO_i7AHello Christopher,
I have recently worked in a case that had mostly the same errors:
InstallHSPerfCounters: Installing agent perf counters.
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallHSPerfCounters: Failed to install agent perf counters. Error Code: 0x80070057.
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 8152 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 9580 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 6008 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 2112 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 8252 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 12504 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 9548 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 11464 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:587]: I/O on thread 10616 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:587]: I/O on thread 8120 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:587]: I/O on thread 2424 could not be cancelled. Error: 1168
MSI (s) (A8!D4) [10:29:51:587]: Product: Microsoft System Center 2012 R2 Service Manager -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211. The arguments are:
-2147024809, The parameter is incorrect.,
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211. The arguments are: -2147024809, The parameter is incorrect.,
CustomAction _RollBack_UninstallHealthServicePerfCountersForUpgrade.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 returned actual error code 1603 but will be translated to success due to continue marking
MSI (s) (A8:3C) [10:29:51:599]: Executing op: ActionStart(Name=_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,Description=Stopping Health services,)
MSI (s) (A8:3C) [10:29:51:603]: Executing op: ActionStart(Name=StopServices,Description=Stopping services,Template=[1])
MSI (s) (A8:3C) [10:29:51:605]: Executing op: ServiceControl(,Name=W3SVC,Action=1,,)
MSI (s) (A8:3C) [10:29:52:621]: Executing op: ActionStart(Name=ProcessComponents,Description=Updating component registration,).
- I was able to resolve it using the command line LOTCTR /R
- And restarting the IIS service using the command line tool IISRESET
- After this command was successfully applied I have tried to install the Service Manager Portal without any errors.
http://technet.microsoft.com/en-us/library/bb490926.aspx
http://technet.microsoft.com/en-us/library/hh875560.aspx
http://support.microsoft.com/kb/300956
https://blogs.technet.com/b/yongrhee/archive/2009/10/06/how-to-rebuild-performance-counters-on-windows-vista-server2008-7-server2008r2.aspx
Thank you very much
Renato Pacheco -
An unknown error occurred while executing the PowerShell script:
Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name: Microsoft-Windows-PowerShell/Operational
Source: Microsoft-Windows-PowerShell
Date: 4/9/2015 3:27:04 PM
Event ID: 4100
Task Category: Executing Pipeline
Level: Warning
Keywords: None
User: mmmmmm\paufra
Computer: tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
<EventID>4100</EventID>
<Version>1</Version>
<Level>3</Level>
<Task>106</Task>
<Opcode>19</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
<EventRecordID>285</EventRecordID>
<Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
<Execution ProcessID="2344" ThreadID="4076" />
<Channel>Microsoft-Windows-PowerShell/Operational</Channel>
<Computer>tools-francis.mmmmmm.com</Computer>
<Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
<Data Name="ContextInfo"> Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
</Data>
<Data Name="UserData">
</Data>
<Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
"An unexpected error occurred while creating a custom installer."
All;
I—and I've seen several others in older posts—have been reported received the error "An unexpected error occurred while creating a custom installer" while attampting to build a customer ARD client installer. My guess is that this is do to a issue related to 10.8.X (10.8.4, in my case) based console Mac but I cannot confirm this. I have verified that there are no outstanding OS, client or application updates or hot fixes, as well.
Has anyone built an successful installer from Mountain Lion-installed Mac? Is there any know workarounds?
Thanks in advance, for any help.Have the exact same problem.
iMac running 10.8.4
Got through the steps of creating a custom client installer.
if I choose not to customize and just save an installer I don't get the error but it creates a file of Zero bytes in size.
If I chose to configure, when I try to save I get:
An unexpected error occurred while creating a custom installer. Please try again....
Console log reports:
9/1/13 12:32:29.603 AM Remote Desktop[1306]: open on /private/tmp/RemoteDesktopClientInstaller_HEATyAJ5CR/extracted/RemoteDesktopCli ent.pkg/Scripts/RemoteDesktopClient.pkg: No such file or directory
I have tried to save this in several location, with no effect on the error or the information logged, with the exception of the name of the temp directory that DOES contains the file (zero bytes):
RemoteDesktopClient.pkg
Need help with this someone...!
APPLE...I JUST purchase this Applciation for $80.....it just flat out does not work.... -
"An unspecified error occurred while performing a conform action on the following file:"
Has anyone else gotten this error in any of their projects? I've searched around Adobe support pages and elsewhere on the internet, but have found nothing.
It comes up in the events window and I can't even read what file it's talking about because it's on the next line, but the error message only shows one line and I haven't figured out a way to expand it.
I'm not even sure if it's causing any problems, or not (the project seems to work ok). This message shows up twice, as a red circle with an 'X' in it, but I also get the following message numerous times referring to a large amount of my .avi files:
"File importer detected an inconsistency in the file structure of filename.avi. Reading and writing this file's metadata (XMP) has been disabled."
That message shows up as a yellow triangle with an '!' in it. Since I haven't been able to turn anything up about these messages, I figured I'd ask here and see if anyone knew what was going on, how to fix the problem or if I should even worry about them.
Thanks.I am having this problem now when i use dynamic link from Premiere to after effects. I copy the footage from premiere then paste into after effects, i add alittle text maybe some light rays etc save it then go back to premiere. Then i get this message "An unspecified error occurred while performing a conform action on the following file C:\Caches\Media Cache Files\text comp 1 48000.cfa." does anyone have any idea as to what this is? i have had a few problems using the dynamic link from premiere to after effects problems such as Premiere freezing, not playing the after effects comps back in real time, crashes etc. Its as if the 2 programs dont like the dynamic link.
Im running Master Collection CS5 & CS 5.5 on running on a 24gb ram, Intel Core i7 950 @3.07GHz PC with a NVIDIA GeForce GTX470 graphics card. -
I really need some help!
I am making a short video on premiere elements 10 and I seem to get this conforming error everytime I open the project and I cannot save it either!!
"Unspecified error occured while performing a conform action on the following file:
File0002.AVI 48000.CFA"
This happens everytime I open premiere elements 10 to lots (or all) of my video clips and I can't find any help in the adobe forums or anywhere else online!
Also, I want to save this video as an AVI file, but when I try to export it, it says it has finished quite quickly and has not even added anything to click on or when it does, it does not play. Sometimes it says it has finished then comes up with: "Error compiling movie. Unknown error". one of these happen everytime that I try to save it.
Lots (or all) of my avi files come up as this same conforming error when I load the project and I have no clue as to what to do!...
It also crashes nearly everytime after these compiling errors!
My computer is running windows 7 ultimate OS
Please help!
Please...!Operating System
System Model
Windows 7 Ultimate (build 7100)
Gigabyte Technology Co., Ltd. M61PME-S2P
Enclosure Type: Desktop
Processor
Main Circuit Board
2.80 gigahertz AMD Athlon X2 240
256 kilobyte primary memory cache
1024 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threaded
Board: Gigabyte Technology Co., Ltd. M61PME-S2P
Bus Clock: 200 megahertz
BIOS: Award Software International, Inc. F2 12/30/2008
Drives
Memory Modules
320.07 Gigabytes Usable Hard Drive Capacity
125.82 Gigabytes Hard Drive Free Space
TSSTcorp CDDVDW SE-S084C USB Device [Optical drive]
SAMSUNG HD321HJ SCSI Disk Device (320.07 GB) -- drive 0, s/n S13RJ90SB04688, SMART Status: Healthy
1984 Megabytes Usable Installed Memory
Slot 'A0' has 2048 MB
Slot 'A1' is Empty
Local Drive Volumes
c: (NTFS on drive 0) *
319.97 GB
125.76 GB free
d: (NTFS on drive 0)
105 MB
65 MB free
* Operating System is installed on c:
The media files are avi and are in my videos folder (videos-windows 7) -
When trying to deploy a sandboxed solution containing only a feature with a simple associated event receiver from VS 2013, I'm getting the following error:
Error occurred in deployment step 'Add Solution': An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0
I'm working in Visual Studio 2013, deploying to SharePoint 2013.
The SharePoint project is very basic. I've only added a feature and an associated event receiver. It works without the event receiver. Then after I simply add the event receiver I get the error.
I've tried deploying directly from VS 2013 as well as publishing to a .WSP and uploading via web interface. Same error reported using both methods. I'm doing this using an Administrator account that I've confirmed is a site collection administrator.
Additionally, I've found that if I change Sandboxed Solution to False, deploy it, retract it, then change Sandboxed Solution back to True, then I can successfully deploy it. But this doesn't seem to be a permanent solution as the error will resurface a day
or two later...Hi Steve,
Are you running your SharePoint 2013 on domain controller?
http://www.learningsharepoint.com/2013/08/09/sharepoint-2013-error-an-unknown-exception-occurred-while-executing-a-sandboxed-code-solution-request-in-the-worker-process-rn0/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b7408608-c21b-45d9-bc16-e6afff510cd2/installed-sharepoint-2013-foundation-on-window-2010-server-issues-activating-sandbox-solutions?forum=sharepointadmin
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful -
Portal Runtime Error : An exception occurred while processing a request
Hello friends,
After upgradation of my portal to the following patch level, SAP J2EE 6.20:
<b>Portal Version :</b> EP 6 SP 2 patch 29 hotfix 0
<b>Content Mgmt and Collaboration version</b> : 6 SP2 patch 5
i faced many performance related issues. Portal seems to be <b>very slow</b>. After logging in, most of the time I get 2 errors:
<b>Either</b>
<b>1></b> Iview remains blank.
<b>Or
2></b> Portal Runtime Error : An exception occurred while processing a request. Portal Runtime exception occured. Please check the System Log.
But when I refresh that particular iview, it works fine.
I went through the portal.log file (/usr/sap/PEP6/j2ee/j2ee_00/cluster/server/managers/log/portal/logs). And found <b>the root cause of most of the exceptions as "com.inqmy.services.servlets_jsp.server.ServletNotFoundException: The requested servlet ( portal ) not found."</b>Aug 18, 2005 6:07:42 PM # PRT-Async 2 Fatal Exception ID:06:07_18/08/05_0669
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/ACCContent/ACCContent.Roles/Company/R.Employee/W.MyWork/P.MyWork.DesktopTools/I.Contacts
Component class : com.sapportals.portal.prt.pom.RootComponentNode
User : tempuser
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:853)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:311)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:479)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: PortalComponentException
at com.sapportals.portal.prt.pom.RootComponentNode.service(RootComponentNode.java:153)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:479)
Caused by: com.inqmy.services.servlets_jsp.server.ServletNotFoundException: The requested servlet ( portal ) not found.
at com.inqmy.services.servlets_jsp.server.ServletContextFacade.loadServletLocal(ServletContextFacade.java:3660)
at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:81)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:275)
at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.include(RequestDispatcherImpl.java:384)
at com.sapportals.portal.prt.pom.RootComponentNode.service(RootComponentNode.java:144)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:479)
<b>Help needed.(</b>as i am helpless now.)
Regards,
NilzAnthony,
I had check it. It was correct. But the thing when I saw in the component Inspector of portal, my iview did not appear.
I created like this
project-> rightclick-> export-> par ->selecting project-> givint protal password-> and finish.
The NW didn't give any error, but the par file didn't appear in the portal componet Inspect.
but the par file is created in the NW studio Navigation bar.
Let me know any help regarding this
thanks
venkat -
XL reporter error occurred while executing report! Rows: 25203 Columns: 30
An error occurred while executing report! Rows: 25203 Columns: 30 Unspecified error
One user gets this error when trying to run a custom XL report. It works for other users(on different PCs). The user can run other XL reports successfully.Hello pls
follow below procedure
start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors
regards
Jenny -
Hi!
I have several mailboxes that are was moved from Exchange 2007 to Exchange 2010.
Sometimes occurs a problem: in OWA may appears error "A problem occurred while you were trying to use your mailbox" when selecting interface elements (such as "Options", "Public Folders",
"Reminders"). After this error user cannot access to mailbox through OWA during 10 minutes. The error "A problem occurred while you were trying to use your mailbox" appears in top of browser window on any computers. This behavior is manifested
in any browser, but it can not be associated with any particular event.
Access to mailbox through Outlook or through mobile devices (ActiveSync) continues to work fine in this time.
The errors in Application log on Client Access Server is absent (including error with EventID 9646). ExBPA is not showing anything specific to that error message. Test of OWA connectivity working successfully.
In the logs of IIS finded records:
2014-08-26 09:23:01 172.16.0.31 GET /owa/ &ex=UE:Microsoft.Exchange.Data.Storage.TooManyObjectsOpenedException 443 DOMAIN\username 172.16.4.218 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.1;+WOW64;+Trident/5.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0;+InfoPath.3;+.NET4.0C;+.NET4.0E;+.NET+CLR+1.1.4322;+MS-RTC+LM+8)
200 0 0 31
Someone faced with such issue?
Have ideas to solve the issue?Hi,
Event 9646 occurs if a MAPI client opens more than the default value. You can follow the steps below for troubleshooting:
1. Run regedit, and then click OK.
2. Expand the following registry subkey:
HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
3. Right-click ParametersSystem, point to New, and then click Key.
4. Type MaxObjsPerMapiSession, and then press ENTER to name the new subkey.
5. Right-click MaxObjsPerMapiSession, click New, and then click DWORD Value.
6. Type Object_type, and then press ENTER to name the object.
Note: Object_type is the name of the object type in the error message that is mentioned in the "Symptoms" section.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Lsmw error 'Specify Files first' while executing option 'Read Data'.
Hi All,
while trying to create mass users through LSMW, i am gettign the error 'Specify Files first' while executing option 'Read Data'.
I have specified file (.txt), manually created (with'1 tab space' between each term). i have used option 'On the PC(Frontend)'. No error while saving.
Next- i have executed 'Assign Files', where the file appeared automatically.
Next- Here, when i try to execute 'Read Data', i get the error 'Specify Files first'.
Can anyone help in resolving this error.Hello Plaban,
What is your purpose? Are you tring to upload the data with more file variant?
There are two possibilities to make file names more variable:
1.If you choose system dependent file names by setting the according flag (in the first step 'Maintain object attributes'), you can define file names for each system in step 'Specify files' by assigning the files to a specific system ID (with a double-click on the specified file).
2.You can use wildcards in the file names where you can assign several values.
I hope this helps you.
Regards,
Blanca
Maybe you are looking for
-
I recently got a receiver and surround sound speaker system. The quality of the audio from the CD player connected to it is far beyond the quality of the audio that comes from the MacBook pro via headphone jack to RCA connection. This was confirmed
-
Acrobat will not open any documents, HELP! Thank you!
Adobe Acrobat will not open any documents, it tells me it is a trial, I click on license product and get a thank you for your Adobe Cloud subscription... but then when I try to open a pdf I get the same message it just keeps looping from trial will r
-
Maintain substitution but once save, it not show in the screen
Dear experts, Normally when we create Substitute, we should see that person under our name, right? But some users* said that they CANNOT SEE their substitution name under their name...therefore they CANNOT DELETE / DEACTIVATE the substitute. (*only s
-
How do I adjust BITC rates in Final cut Pro
I have a client who i am doing sound design for on his short film. I received an m4v in 23.98 with the dialog track embedded. I performed my dialog edit and exported a BWF from Digital performer which all synced perfectly here. He in turn dropped the
-
Why not jdeveloper creates the persistance unit and the session client and
why you do not create the persistance unit (outside) and the session client and ...the interface and other required opjects automatically when I create the application or the project? why you are using symbols like AFD, JSF, JSP, JPA,.JEE...and tens