SCSM 2012 R2 Workflows and DW Jobs Do Not Come Up After SQL Node Switch
Hello,
We have a MS SQL Server cluster consisting of 2 nodes in our environment. After nightly OS updates and consequent server restart of one of SQL Cluster nodes (where an update takes place) SCSM workflows stop working, in certain cases Data Warehouse jobs also
stop until I restart SCSM server and start DW jobs manualy.
According to logs SQL server switches a node succesfully, but still it is impossible to connect to the SQL Server for 1-3 minutes. Is this a normal behavior? Is there any best practice for handling SQL connection issues and patch management on SQL cluster
nodes?
Thanks!
Restart the system center data access service on the workflow server (the SCSM management group server you installed) any time the SQL server migrates. the workflow service runs every 30 seconds, looking for work to do, and if it fails a few times, then
it stops looking. restarting the service is the only way that i'm aware of to fix it.
Similar Messages
-
SCSM 2012 R2 workflows and connectors are not triggered
Hi All,
Suddenly in my SCSM 2012 R2 Production environment , the connectors stopped synchronising at the schedule time and the Service request was in New state for very long time (stuck in New state).
When I started troubleshooting , I saw the workflow status in SCSM console , oops!! no entries
In operations manager event log , no logs generated regarding the connector issue or the SR workflow issue .
Then I tried starting the AD connector manually , two event logs (information-LFX service) generated
SyncBegin:Connector Id
SyncEnd:Connector Id
Then I stopped the services
Microsoft Monitoring Agent
System Center Data Access Service
System Center Management Configuration
deleted the health service state folder content and restarted the services
Then issue is solved , the connector started syncg and the service request state changed from New to In progress and all the workflows were triggered.
Since there is no events logged for this issue , this gonna make a huge impact in SCSM environment since workflows are the key feature in SCSM .
Is this a known issue in SCSM 2012 R2 and are there is any fix in the update rollups
Are there is any reason behind why we need to flush the SCSM health service state and how this affect the functioning of SCSM?
since we have the SCOM agent installed as part of SCSM installation and scom uses the same Health service state folder to monitor the SCSM server ??
sorry for too many questions , just to clarify my all doubts
Is there any permanent solution ?
Thanks,
KalaiHi,
This issue seems like a performance issue. It is recommended that you schedule the AD/SCCM connectors to run when console/system usage is low since it can have an impact on performance. You can use the following instructions to reschedule the AD connectors.
http://blog.scsmsolutions.com/2012/03/update-ad-and-sccm-connector-scheduler-with-powershell/
And here is a similar thread for you referenc, please go through it for more details:
Connectors are not Syncing in Service manager 2012 Sp1 RTM
https://social.technet.microsoft.com/Forums/systemcenter/en-US/2824c769-99ea-4ec6-ab7b-1007efdcb339/connectors-are-not-syncing-in-service-manager-2012-sp1-rtm?forum=connectors
Here is a link about Description of Update Rollup 2 for System Center 2012 R2 Service Manager:
https://support.microsoft.com/kb/2904710?wa=wsignin1.0
It seems that it does not have fix for this.
In addition, the newest one is Update Rollup 4 for System Center 2012 R2 Service Manager:
http://support.microsoft.com/kb/2989601
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
HT1386 i update my phone to is06.01 and my music will not come back after i svnc
i have update my iphone 4s to is06.0.1 and after i sync my music will not come back has any one had this problem
Is the music in the iTunes library on your computer?
-
SCSM 2012 R2 Workflow Database Move Prerequisites
We would like to move our existing SCSM 2012 R2 workflow database to a brand new Windows 2012 R2 server with a new SQL database server. Do you have recommendations on prerequisites for setting this up? The new database server has not been installed
yet and the server itself will be created shortly. SQL and databases are not my area of expertise.
One of our resources will export the databases from the current cluster and we will import them over to the new database server.
For the server, we are thinking of having the following:
- One drive dedicated for OS,
- One drive dedicated for SQL program, instance, and tasks, and
- One drive for database backups and transaction logs.
Please provide us with some advise and let me know. Thanks.Take a look here: http://codebeaver.blogspot.se/2014/12/service-manager-performance.html under the SQL paragraph.
on a side note, it's really good if you can split the DB, log and tempdb on different disk. And the tempdb and log should be on really fast disks.
www.zgc.se - Sysadmin blog. -
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on. It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else. It is completely non-functional.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom -
Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.
Finder icon on dock, macintosh hd, library, launch agent - delete all files & restart sleep to test
also
Finder icon on dock, macintosh hd,
Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
delete file & restart sleep to test. -
My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???
Return it for a warranty replacement.
-
The screen of my iphone 4 is blank and the phone does not respond even after pressing the on/off and home button, the only reaction is the vibration felt when I plug in to charge the phone. What should I do?
This is the ipod touch forum
-
Dear All,
I am requesting help to resolve problem on my iPhone 4S. The Apple Icon is just flashing on connection to charging source or to the computer and the phone does not come on. Need help as this phone is driving me crazy.Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too. -
I DONT KNOW WHAT TO DO!!!!!!!!! my ipohone die and i placed it on the charger to charge and my screen will not come up its black. i tried to restore it but my phone will not come on what do i do
i did the apple sign came on as white and my screen had white around the edges i retored it and afterwards my phone is vibrating nonstop on the USB cored while still pluged to my pc
-
Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help
so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!
-
SCSM 2012 R2- Workflows not generating email notifications and other issues
hace tres días que no corren mis flujos de trabajo en SCSM 2012, veo el visor de eventos y lo único que conisgo es el siguiente error:
The request to synchronize state for OpsMgr Health Service identified by "f85f05c3-0e7b-d49d-b849-98faad4ad74a" failed due to the following exception "Microsoft.EnterpriseManagement.Common.DataItemDoesNotExistException: An instance was deleted
before its properties could be read.
at Microsoft.Mom.ConfigService.SvcMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)".
Como puedo hacer para volver a instalar los MP de flujos de trabajo, he borrado cache peor sin éxito.Iffectatodosworkflowsfrom the dayJuly 18began tofail andno longersendingnotifications, I have reviewedthe
databasewithqueries thatprovideSubscriptionStatus.sql
WorkflowPerformanceTroubleshootingQueriesV2
and I note thatit isthe difference betweenucha Workflow Watemark and Trasaction Log Watermark -
Scheduled job does not stop even after the scheduling window closes
We have written custom stats gathering job whose duration has been set as 14 hours in the schedule. This job starts daily at 6:00 PM and expected to complete upto 8:00 AM next day. But the problem is that this job continues to execute even after 14 hours. If we look at the dba_scheduler_job_run_details table, then its execution duration is about 16 - 19 hours daily. We could not understand as why it is not closed when scheduling window closes? Is there any problem with the scheduler configuration?
select job_name
,program_name
,schedule_name
,schedule_type
,stop_on_window_close
from dba_scheduler_jobs
where job_name = 'GATHER_STATS_STD_JOB';
Output:
JOB_NAME
PROGRAM_NAME
SCHEDULE_NAME
SCHEDULE_TYPE
STOP_ON_WINDOW_CLOSE
GATHER_STATS_STD_JOB
GATHER_STATS_STD_PROGRAM
GATHER_STATS_STD_SCHEDULE
NAMED
TRUE
SELECT window_name
,schedule_owner
,schedule_name
,schedule_type
,start_date
,repeat_interval
,end_date
,duration
,window_priority
,next_start_date
,last_start_date
,enabled
,active
FROM dba_scheduler_windows;
window_name
schedule_owner
schedule_name
schedule_type
start_date
repeat_interval
end_date
duration
window_priority
next_start_date
last_start_date
enabled
active
GATHER_STATS_STD_WINDOW
sys
GATHER_STATS_STD_SCHEDULE
named
+00 14:00:00.000000
high
23-feb-15 06.00.10.000000 pm +02:00
23-feb-15 06.00.10.095878 pm +02:00
TRUE
TRUE
We are using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod on Linux platform.
Message was edited by: MoazzamStraight out of the docs 83 DBMS_SCHEDULER
stop_on_window_close
This attribute only applies if the schedule of a job is a window or a window group. Setting this attribute to TRUE implies that the job should be stopped once the associated window is closed. The job is stopped using the stop_job procedure with force set to FALSE.
Having said that, stop_job with force applies to whether information about the job is gathered - you would have to test, but I believe that the statistics gather will be terminated in the middle of whatever it's doing.
Update: force says:
force
If force is set to FALSE, the Scheduler tries to gracefully stop the job using an interrupt mechanism. This method gives control back to the slave process, which can update the status of the job in the job queue to stopped. If this fails, an error is returned.
If force is set to TRUE, the Scheduler will immediately terminate the job slave. Oracle recommends that STOP_JOB with force set to TRUE be used only after a STOP_JOBwith force set to FALSE has failed. -
Dbms_schduler job is not running on a 2 node rac when 1st node fails
Hi,
I want to create a dbms_scheduler job in a 2 node RAC and the job should always run on the node1 and if node1 is down then it should run on node2. This is Oracle 10gR2 (10.2.0.3 in WINDOWS) .In order to do the same I did following
-- First Step
Using DBCA- Service Managment - Created a service (BATCH_SERVICE) and given node1 as preferred and node2 as available. This created following entry in tnsnames.ora in both nodes.
BATCH_SERVICE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = node2-vip)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = BATCH_SERVICE)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 180)
(DELAY = 5)
--- Step 2
-- Created BATCH job classes.
BEGIN
DBMS_SCHEDULER.create_job_class(
job_class_name => 'BATCH_JOB_CLASS',
service => 'BATCH_SERVICE');
END;
-- Step 3 -- created a job using job_class as BATCH_JOB_CLASS
begin
dbms_scheduler.create_job(
job_name => 'oltp_job_test'
,job_type => 'STORED_PROCEDURE'
,job_action => 'schema1.P1'
,start_date => systimestamp at time zone 'US/Central'
,repeat_interval => 'FREQ=DAILY;BYHOUR=11;BYMINUTE=30;'
,job_class => 'BATCH_JOB_CLASS'
,enabled => TRUE
,comments => 'New Job.');
end;
Now when I monitor this job it runs on node1. Now I started testing for failover. I manually shutdown 1st instance. Then as per my understanding job should run on 2nd node. But job is not picking up.
when I run the followign command
srvctl status service -d db -s BATCH_SERVICE
service BATCH_SERVICE is running on instance node2.
Any help is really appreciated.It does not show that whether job is running or broken.
Maybe you are looking for
-
I've already setup the original user account and do not want to do it again, how do I merge the two user accounts into one so all of my stuff is under one user account?
-
High freq pulsing and error message
while recording or in playback i hear a pulsing high freq and soon after a message pops up that reads " error while trying to sync audio and midi". my interface is a motu traveler and there tech support doesn't seem to be responding to the same quest
-
Where did "attach large file" go?
That was in yahoo all new mail, in the list of applications on the left area; gone. Can it be there on and off? odd. Also, I have purchased stuffit destinations and dragged a folder of 5 pictures just under 100 MG each, into the zip application, (in
-
WHERE CAN I FIND AUTHORIZED PERSON IN THIS SITE FOR ASK QUESTIONS ????
Pleaseeeee ????
-
Trouble loading photos from iPhoto to iPad 2I
2nd time I had to type this because the massage was lost somewhere between my typing and hitting send. Not crazy about iPad yet. Anyway, when I hooked the iPad to my deasktop to sync, it loaded all of my pictures from years ago, but only part of my