SCSM Connector not importing new data from collection

Hello -
I just installed SCSM with SP1. I set up a test collection in SCCM with 20 machines. I created an SCCM connector and ran the import.
all machines in the collection with a client showed up and with all data. I then installed the SCCM client on one of the machines that didn't have it. That machine has not been updated with any data in SCSM even though resource explorer in SCCM
shows all the hardware and software inventory.
Further, I added more machines to the collection and did a manual 'resynch' and those machines did not show up in SCSM - also waited several hours and did a scheduled import and the newly added machines are not showing up in SCSM.
has anyone experienced this?
Thanks

Hello Andreas -
I see that the import started successfully with event ID 3333, Source Lfx Service
I then see event 3339, more 3333, and then an event 34012 that says: 'imported 64 changes for data of type Microsoft.SystemCenter.ConfigurationManager.CollectionInfo from cache table Collections.
Those events are repeated throughout the collecton process which takes approximately 20 minutes I also see event IDs 34011 several times throughout those 20 minutes. The last event related to the synchronization is a 3339 which indicates 'Finished'.
I see no errors, it looks like data was imported according to the events, but the data does not show up in the 'all computers' list.
I'm concerned because the data I want imported is going to change frequently and I want the data for SCSM to match what is in SCCM.
I have anothe question also - If a computer is removed from SCCM will it be removed from SCSM?
Thanks,

Similar Messages

Photoshop Elements 10 not importing GPS data from xmp file

PSE 10 is not importing GPS information from the xmp file. Lightroom correctly records the
GPS data but this info in not brought in when I add the photo to the PSE 10 catalog. Has anyone experienced
the same problem?

The Google map module and geotagging have only just been added to LR4, released this week. There is no longer a map feature in Elements since Adobe dropped the earlier tie-up with Yahoo. Adobe reserves the right to change and amend partner services and this has disappointed many users of previous versions of PSE. It’s possible that the map could be re-introduced into future versions of PSE but don’t count on it and given the significant price cut on LR4, the decision could be strategic.

Why can't I import gps data from iPhone photos in aperture 3

I have an iPhone 4 (it's already an old model!) and why can't i still not import GPS-data from photo's on my iPhone 4 in Aperture...
Importing photos from the iphone just goes fine...

Richie:
But do you see the GPS of the iPhone data in Meta data section of the Inspector (set to a preset that shows GPS), as Frank Caggiano asked?
If the images do import the EXIF data, then you should be able to lift and stamp the GPS coordinates. I do that freuently.
Select on of your iPhone images and lift the sata
In the lift&stamp HUD deselect everything but the GPS coordinates, like this.
If no GPS-coordinates do appear in this setting, then your iPhone images do not have the EXIF info required, and you may need to check the iPhone settings.
If you see the EXIF data, then you just need to select the DSLR images that were taken at the same location and you can stamp the EXIF data to the DSLR images.
And after that you should be able to see their locations in the Places view.

Not enough space on my new SSD drive to import my data from time machine backup, how can I import my latest backup minus some big files?

I just got a new 256GB SSD drive for my mac, I want to import my data from time machine backup, but its larger than 256GB since it used to be on my old optical drive. How can I import my latest backup keeping out some big files on the external drive?

Hello Salemr,
When you restore from a Time Machine back up, you can tell it to not transfer folders like Desktop, Documents. Downloads, Movies, Music, Pictures and Public. Take a look at the article below for the steps to restore from your back up.
Move your data to a new Mac
http://support.apple.com/en-us/ht5872
Regards,
-Norm G.

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

Need a script to import the data from flat file

Hi Friends,
Any one have any scripts to import the data from flat files into oracle database(Linux OS). I have to automate the script for every 30min to check any flat files in Incoming directory process them with out user interaction.
Thanks.
Srini

Here is my init.ora file
# $Header: init.ora 06-aug-98.10:24:40 atsukerm Exp $
# Copyright (c) 1991, 1997, 1998 by Oracle Corporation
# NAME
# init.ora
# FUNCTION
# NOTES
# MODIFIED
# atsukerm 08/06/98 - fix for 8.1.
# hpiao 06/05/97 - fix for 803
# glavash 05/12/97 - add oracle_trace_enable comment
# hpiao 04/22/97 - remove ifile=, events=, etc.
# alingelb 09/19/94 - remove vms-specific stuff
# dpawson 07/07/93 - add more comments regarded archive start
# maporter 10/29/92 - Add vms_sga_use_gblpagfile=TRUE
# jloaiza 03/07/92 - change ALPHA to BETA
# danderso 02/26/92 - change db_block_cache_protect to dbblock_cache_p
# ghallmar 02/03/92 - db_directory -> db_domain
# maporter 01/12/92 - merge changes from branch 1.8.308.1
# maporter 12/21/91 - bug 76493: Add control_files parameter
# wbridge 12/03/91 - use of %c in archive format is discouraged
# ghallmar 12/02/91 - add global_names=true, db_directory=us.acme.com
# thayes 11/27/91 - Change default for cache_clone
# jloaiza 08/13/91 - merge changes from branch 1.7.100.1
# jloaiza 07/31/91 - add debug stuff
# rlim 04/29/91 - removal of char_is_varchar2
# Bridge 03/12/91 - log_allocation no longer exists
# Wijaya 02/05/91 - remove obsolete parameters
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
# You may also consider using Database Configuration Assistant tool (DBCA)
# to create INIT file and to size your initial set of tablespaces based
# on the user input.
# replace DEFAULT with your database name
db_name=DEFAULT
db_files = 80 # SMALL
# db_files = 400 # MEDIUM
# db_files = 1500 # LARGE
db_file_multiblock_read_count = 8 # SMALL
# db_file_multiblock_read_count = 16 # MEDIUM
# db_file_multiblock_read_count = 32 # LARGE
db_block_buffers = 100 # SMALL
# db_block_buffers = 550 # MEDIUM
# db_block_buffers = 3200 # LARGE
shared_pool_size = 3500000 # SMALL
# shared_pool_size = 5000000 # MEDIUM
# shared_pool_size = 9000000 # LARGE
log_checkpoint_interval = 10000
processes = 50 # SMALL
# processes = 100 # MEDIUM
# processes = 200 # LARGE
parallel_max_servers = 5 # SMALL
# parallel_max_servers = 4 x (number of CPUs) # MEDIUM
# parallel_max_servers = 4 x (number of CPUs) # LARGE
log_buffer = 32768 # SMALL
# log_buffer = 32768 # MEDIUM
# log_buffer = 163840 # LARGE
# audit_trail = true # if you want auditing
# timed_statistics = true # if you want timed statistics
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
# Uncommenting the line below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest = disk$rdbms:[oracle.archive]
# log_archive_format = "T%TS%S.ARC"
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
# rollback_segments = (name1, name2)
# If using public rollback segments, define how many
# rollback segments each instance will pick up, using the formula
# # of rollback segments = transactions / transactions_per_rollback_segment
# In this example each instance will grab 40/5 = 8:
# transactions = 40
# transactions_per_rollback_segment = 5
# Global Naming -- enforce that a dblink has same name as the db it connects to
global_names = TRUE
# Edit and uncomment the following line to provide the suffix that will be
# appended to the db_name parameter (separated with a dot) and stored as the
# global database name when a database is created. If your site uses
# Internet Domain names for e-mail, then the part of your e-mail address after
# the '@' is a good candidate for this parameter value.
# db_domain = us.acme.com # global database name is db_name.db_domain
# FOR DEVELOPMENT ONLY, ALWAYS TRY TO USE SYSTEM BACKING STORE
# vms_sga_use_gblpagfil = TRUE
# FOR BETA RELEASE ONLY. Enable debugging modes. Note that these can
# adversely affect performance. On some non-VMS ports the db_block_cache_*
# debugging modes have a severe effect on performance.
#_db_block_cache_protect = true # memory protect buffers
#event = "10210 trace name context forever, level 2" # data block checking
#event = "10211 trace name context forever, level 2" # index block checking
#event = "10235 trace name context forever, level 1" # memory heap checking
#event = "10049 trace name context forever, level 2" # memory protect cursors
# define parallel server (multi-instance) parameters
#ifile = ora_system:initps.ora
# define two control files by default
control_files = (ora_control1, ora_control2)
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = TRUE
# Uncomment the following line, if you want to use some of the new 8.1
# features. Please remember that using them may require some downgrade
# actions if you later decide to move back to 8.0.
#compatible = 8.1.0
Thanks.
Srini

B2B adapter is not polling any data from EDI X12 810 ECS file

Hi All,
I am new to Oracle B2B. I am using
Jdev 11.1.1.6
Oracle Editor : 7.0.5.4016
Document Protocol : EDI_X12
Document type : 810 (Invoice )
Version: 4010
Weblogic server :11.1.1.6.0
Requirement is : i had an EDI file and i need to translate the EDI map using the B2B adapter, transport to SOA Suite and insert into a custom DB.
Issue is : B2B adapter is not polling any data from EDI X12 810 ECS file
for this i created sample EDI X12 810 ecs file, i converted the same to .xsd and .dat file. I created partner, and while configuring channel i used '*Generic File 1.0*' protocol and i given folder path( i also checked, by just giving folder Name) in the folder name property of 'Transport Protocol Parameters' , i also placed sample xml file into this folder. And I created sample process in Jdev to poll data from this folder.
build and deployment is fine for this process, but no instances is created for this process. and the Process is not Polling any data from the folder which i mentioned in the Transport Protocol Parameters.
is this the way am doing is wrong for my current requirement or am i did any wrong step (as stated above ) ? Please help me. How can i receive data from this EDI file to my bpel process so that i can continue with the rest of the Process. Thank you in advance
Edited by: 979032 on Feb 12, 2013 11:02 PM
Edited by: 979032 on Feb 13, 2013 12:14 AM

Hi Anuj ,
I placed .dat file now. The file Picked by B2B adapter. But i was getting the Error. The error i found in Business Message as
"Error Code     B2B-50547
Error Description     Machine Info: (soabpm-vm) Description: Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND. "
But i created agreement for the partner and my document type name is "NewDocumentType" and in the wire message a am getting as shown below
Id     7F00000113CFC36785C0000017D7E2B0
Message Id     7F00000113CFC36785C0000017D7E2B0
Business Message     7F00000113CFC367A450000017D7E2B7
Packed Message     Packed Message
Payload     Payload
Protocol Message Id     EDIX12810.dat@7F00000113CFC36799B0000017D7E2B4
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
Message Digest     Message Digest
Digest Algorithm
Transport Protocol     File
Transport Protocol Version     1.0
Url     file://localhost//home/oracle/Desktop/B2BFiles/
security
Transport Headers     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
certificates     certificates
State     ERROR
Reattempt Count
Error Code
Error Description
Error Text
exchangeRetryInterval
exchangeRemainingRetry
Message Size     2289
I also has one more doubt, now i created ecs,xsd and .dat by selecting sample EDI file in Document editor. suppose i want create the same ecs ,.xsd and .dat for my gentran file which is of EDI x12 810 standard but i have it in PDF format , then how can i access that to in Document editor ( in the import option, i found Gentran DDF and Gentran Unix IG and i was getting the following error while importing my PDF file
ErrorCode : 0xC00CE508
File Position : 10
Line Number : 2
LineByte Position :2
Reason: An invalid character was found in text content error) so that i can create .dat file and i can place the same in my folder in order to pick the file.
Please help us . Thank you .
Regards,
Kotresh
Edited by: 979032 on Feb 21, 2013 2:17 AM

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Report is not pulling the data from multiprovider in BI 7.0

Hi BW gurus,
We have upgraded our BW systems from 3.5 to BI 7.0.
According to our requirement we did some modifications(added some new cubes) to existing multiprovider. All the objects and assignments looks good in the multiprovider.
We are facing a problem while executing the reports, report is not pulling any data from the particular multiprovider but I can see the data from the multiprovider.
For any selection creteria we are getting the msg like "No applicable data found".
Created a sample query with only two chars and two KF's no conditions, no exceptions still the report is not populating any data for any selection creteria.
Appreaciate for your help in this regard.
-BK

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

Import xml data from a variable locations

Hi,
Could some please help me with a solution?
Here's what currently runs on our server. An applications runs and does:
Create an unique folder
Copy a fillable, reader extended form into this folder
Put data in a XML-file (always same filename) and places that in the same folder
Open the PDF for the user to fill in the details.
Now, the change I want to make is to import the data from the XML file into the PDF. I used a button on the form using xfa.host.importData(). This fires up a browse-for-file-box so the user can select the correct xml-file. This works!
However, as the folder from where the PDF opens, is always a different one, the browse-for-file-box opens in the wrong folder. The user does see a XML-file, but that is from a different folder. So, what I wanted is the following:
The form opens
The PDF imports the data from the XML file automaticly, without user intervention
The user finalizes the form and saves it.
In short: How can I create a variable from the folderlocation where the pdf is opened, and merge that with the xml-filename?
Hopefully I than can use xfa.host.importData("filename.xml")
I hope someone can advise me! Thanks in advance!

Hi,
thanks for your responce. It sure was helpfull to have a look at that discussion. However, that article regards a defined source with a fixed path (xfa.host.importData("/c/path/to/xml/file.xml");)
There is my problem. I need to determine the path first since that changes every time. Then I want to import that file using code.
I hope my question is clear. If not, please let me know!
Regards,
Erik
By the way, I also tried opening the same pdf from different folders. Adobe Reader seems to remember where it looked previous for a XML-file. So,if there is a way to set the folder where the browse-for-file-box opens with, that would be great too!

Ipod will not update new songs from itunes

My ipod will not update new songs from itunes. I've purchased several songs from the music store, updated my playlists and as added some from my CD collection and they are not transfering from my library to my ipod.
I've tried numerous configurations under the preferences - ipod menue but still can't get them to transfer.
One error I occasionally get is "ipod cannot be updated because there is not enough free space to hold all of the songs in the itunes music library"
There is plenty of room on my ipod so I can't figure out why. It almost seems as if it is trying to copy all of my songs not just the new ones because all songs in my librbary are checked.

Thank you for responding.
Doesn't it have to be on either manual or auto update? What other option is there?
I will try downloading latest updates.
I know it will work if I reset it (have done it a few times already). I just hate having to restore factory settings everytime I want to put a new song onthe ipod.

Iphoto will not import my photos from my digital camera because it says it is having a problem downloading my photos. I'm using the same digital camera I have always had and have the current version of iphoto and am usuin snowleapord. Any thoughts?

iphoto will not import my photos from my digital camera because it says it is having a problem downloading my photos. I'm using the same digital camera I have always had and have the current version of iphoto and am using snowleapord 10.6.8. Any thoughts?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

After update LR 5.4, the program will not import new pictures

After update of LR 5.4 on my laptop, I cannot import any new pictures anymore.
I did the same update on my desktop and there it was no problem at all.
Does anyone know how to solve this problem??

I am importing from a verbatim ssd, and I just don't get the chance to choose an import, I don't see any pictures to choose from. Ans what ever I pick it won't work
On my desktop it was no problem at all. But my laptop gives my trouble.
I do not have any error messages
Verstuurd vanaf mijn iPad
Op 21 jun. 2014 om 20:42 heeft "ssprengel" <[email protected]> het volgende geschreven:
after update LR 5.4, the program will not import new pictures
created by ssprengel in Photoshop Lightroom - View the full discussion
Where are you importing from? What type of Import (Copy, Move, Add)? What is the destination specified at the righthand side?
Any error messages?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6482328#6482328
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Keynote document saved in icloud not updating with data from Numbers? is icloud the problem

keynote document saved in icloud not updating with data from Numbers? is icloud the problem.
If both files are held locally on the computer it looks like there is no problem however if you try and do it though icloud (ie your docs are saved on icloud) you dont get the "source" oprion besides the graph etc. Is this a but or a broken function due to the new implementation of icloud.

Hi sebnor31,
This is Visual C# forum, but your question seems not related to Visual C# language itself. It most likely related to the bluetooth message transaction protocal or with the device itself.
I'll move your question to [where is this forum for...] forum where the morderator may direct you to the correct forum.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Importing Live Data from Onedrive for Business

I have a number of excel spreadsheets sitting in one drive for business. These spreadsheets are updated on a daily basis by a number of people (all using excel online).
What I need to do is bring this data from the individual spreadsheets into one place so that I can create a dashboard that updates in real time based on the data in the individual sheets. I understand that it is not possible to create this directly using
excel (i.e. excel to excel). And that is probably not ideal anyway as the relationships will not be linear.
So, I am trying to find the best way to do this. Would it be best to create an access database for each of the excel sheets? Or can I import the data from the various excel sheets to a database, and then create the dashboard from the database?
Is anybody able to help me with the best and easiest way to do this?
Thanks,

Hi, Sam.
Is this still an issue?
Thank you!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

SCSM Connector not importing new data from collection

Similar Messages

Maybe you are looking for