SCSM R2 Duplicate Email Notifications

Hello anyone! I recently installed SCSM R2 on Windows Server 2012 R2 and created my Service Manager environment. I incorporated an Active Directory connector so I could notify affected users and assigned users of incident creation, assignment and resolution.
I followed instructions based off various guides I found and created a custom management pack to store all my templates, workflows, etc. I am only deploying three custom workflows within my Incident Event Workflow Configuration. Those three workflows are as
follows:
1) Create Event - Incident Created - This workflows will send an email notification to the affected user that an Incident has been created.
2) Update Event - Incident Assignment - This workflow will send an email notification to the assigned to user.
3) Update Event - Incident Closed - This workflow will send an email notification to the affected user when the incident has been resolved. 
I am using custom notification templates for each of the workflows and they all three are working, doing what they are intended to do except for one aggravating issue. In regards to the "Incident Assignment" workflow the "assigned to"
user is receiving two emails (exact replicas) notifying that the ticket has been assigned to them. My notification list within the "Incident Event Workflow Configuration" properties for the Incident Assignment workflow is as follows:
Under Notification List:
User - Assigned to User , Message Template - Incident Assignment Email Notification. This is the only notification added to the notification list. I do not understand why it is sending two emails to the "Assigned to User". If anyone is experiencing
a similar issue or can help please do. Thanks!

Thank you Andreas! This MP did fix my issue. To anyone out there that needs to know the steps taken after downloading the MP please see below. 
1) Go to the link listed by Andreas Baumgarten above. Download the Lumagate.AssignedToNotification.xml MP. Save it to a network share you can access from your SCSM server.
2) Navigate to the Administration tab in your SCSM console. Select Management Packs and then choose import under Management Packs in the Tasks section.
3) Once you have imported the MP go to the Workflow Configuration section under Administration still. 
4) Choose your desired workflow to edit (in my case, Incident Event Workflow Configuration) and click properties. 
5) From there you can Add a new workflow and select the Lumgate MP. I was able to leave the criteria and notification list sections blank and chose "Do not apply a template" under "Select Incident Template". Make sure this workflow is
enabled and you may need to disable your existing custom workflows if any were previously created. 
6) Lastly, I went and customized the Notification templates from the MP to better suit my company. You can edit the HTML in the message body to fit your needs. 
Brian Toms

Similar Messages

  • Duplicate email notifications in using extended notification

    Hi,
    I have configured extended nottification to send workitem notifications to outlook email inbox by using SWNADMIN & SWNCONFIG.  I have executed the SWN_SELSEN program to send notifications out.  However, I am getting two duplicate email messages for every same workitem.  Has anyone run into this same issue?  If you have, could you share how did you solve this problem.
    Thank you for your help.
    Jennifer Tran

    If you're on ECC 5.0 or higher - check this blog out
    <a href="/people/saujanya.gn/blog/2006/12/19/how-to-get-work-items-your-outlook-inbox:///people/saujanya.gn/blog/2006/12/19/how-to-get-work-items-your-outlook-inbox
    If you're on something lower than ECC 5.0 -
    Search SDN for notes on RSWUWFML2 - that's a SAP program that you could use to send workitem to outlook email inbox.
    Hopes this help.
    Jennifer Tran
    Message was edited by:
            Jennifer Tran

  • Duplicate Email Notifications on iOS5

    I am currently having issues with notifications on my iphone, but not all the notifications, just my email.
    I checked the settings for notifications already (banner, bubble, etc)
    All other items show up as a single notification, but for emails, i receive duplicates, even though I only receive the email once.
    Is there something I set up wrong to have this happen (ie: iCloud, email, notifications, exchange email)?
    I am definitely sure that its just email and its not any other items that are duplicated.
    Thank you.

    Found this answer which worked for me
    For anyone else with the problem. I went into settings; Mail, Contacts, Calendars; Accounts; then turned off one of the "mail" options on my two email accounts.
    One account is for email.
    One account is for syncing my calendar.
    at: http://www.iphoneforums.net/forum/iphone-3g-54/double-email-notifications-7603/

  • IN SCSM 2012 SP1 email notification duplicating

    We use SCSM 2012 SP1 in our environment. We create mail notification's for incident assignment. But a mail notification for an incident under same template going 2 times.
    How can we configure it like for an incident same mail go for single time not twice.
    Please help me ASAP. 
    Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

    Dear Mithun,
    if email notifications are duplicated, it means that 2 workflows that send emails are running on the same incident, kindly check your workflows and their criterias.
    Best Regards
    Jreij12

  • Duplicate Email Notification

    Post Author: Selvam
    CA Forum: Publishing
    Hi,
    I have schedueld a report weekly Option(Monday to Friday) 8.00 AM with Email notification. I am getting more than 3 notification per day.  I don't know why it's happeing. I am getting this error for only Weekly schedule. I have checked the history of the report. It's having only one occurance, but we are getting more than there successful Email notification
    Please advice me.

    I've also put out a request for help.  Same issue that you are experiencing and like you I think I've tried just about everything I can think of, but no change.  Email messages are duplicated.  Quite annoying actually.

  • Receive duplicate email notifications

    I receive duplicate messages to my Apple Discussion notifications. Any way to make the duplicates stop?
    Both are to the same email address. Comparing headers shows no differences.

    Should have kept my mouth shut
    Do you have notifications enabled for this thread? For this community? If so turn it off.
    For the thread look at the top of the thread list
    For the community look at the first page

  • Duplicate email Notifications.

    Okay this notification at this particular point is a duplicate to the one I read last evening.
    http://forums.adobe.com/message/2164560#2164560
    I will edit and add other duplicates as I run across them.
    what seems to be happening is the last post read in a thread from a previous day is used as first post in a new batch of notifications the next day sometimes it further up and maybe the last to or three threads are actually new.

    Okay here is another one Hope this time I've coppied everything proper this time:
    From - Sat Aug  8 15:04:04 2009
    X-Account-Key: account2
    X-UIDL: sm_15C15A8C_45cad4a6a2f74e648825f35a48219953
    X-Mozilla-Status: 0001
    X-Mozilla-Status2: 00000000
    X-Mozilla-Keys:                                                                                
    Return-Path: <[email protected]>
    Received: from mail.sgaur.hosted.jivesoftware.com [209.46.39.252] by mail.kimbanet.com with SMTP;
       Sat, 8 Aug 2009 14:55:33 -0400
    Received: from sgaurwa42p (unknown [10.137.24.43])
         by mail.sgaur.hosted.jivesoftware.com (Postfix) with ESMTP id 52E7E24082CD
         for <*******@kimbanet.com>; Sat,  8 Aug 2009 12:55:27 -0600 (MDT)
    Date: Sat, 08 Aug 2009 12:55:26 -0600
    From: Kath-H <[email protected]>
    Reply-To: [email protected]
    To: Phillip Jones <*******@kimbanet.com>
    Message-ID: <1390869882.1206411249757727343.JavaMail.jive@sgaurwa42p>
    Subject: [Forum comments] Re: Moderation in this forum
    MIME-Version: 1.0
    Content-Type: multipart/mixed;
         boundary="----=_Part_124937_479981614.1249757726400"
    Content-Disposition: inline
    X-SilverlineSVF: SubjectLength: Subject length of 45 matches range "Between 40 & 60 chars"
    X-SilverlineSVF: Failed Tests: SubjectLength[1]
    X-SilverlineSVF: Total Weight: 1
    X-SmarterMail-Spam: SPF_None, SpamAssassin 0.2 [raw: 0.1]
    ------=_Part_124937_479981614.1249757726400
    Content-Type: text/plain; charset=UTF-8
    Content-Transfer-Encoding: quoted-printable
    Content-Disposition: inline
    Message was edited by: Jochem van Dieten to remove private informatio n

  • Notification Center Shows Duplicate Email Notifications

    I use the Apple mail app for my emails.  Under Mountain Lion, when new emails arrive, I receive a banner notification but when I look in notification center these emails appear as 2 separate notifications.
    Any advice would be appreciated.

    Ray,  I was receiving multiple notifications sent to my GMAIL IMAP account.   I noticed that when I opened the first notification I was shown mail with the "all mail" label selected.  Opening the second notification displayed the "important" lablel. 
    To resolve this issue,  I logged into the gmail web interface, opened settings, clicked on labels.  I then unchecked the "show in IMAP" box for the "all mail" label and the "important" label.
    Perhaps this will help you.

  • Email notification body

    Hi,
    I have creted User/Analyst email notification.When end user send mail to SCSM it;s creating ticket and send the email notification to the User.But the Email body and Signature mixing and showing in a single paragraph.I need to have same email body which
    user will send to scsm in the email notification.
    Please see the attachment for more details.. 

    I have given <br> between Category and Description.But Email body and and signature showing in a single paragraph.
    I need to have same email body which user will send to scsm in the email notification
    Thanks
    Krish

  • Deleting queued email notifications in SCSM 2012

    Hi,
    We have disabled the email notification channel in SCSM 2012 and the workflows which are used to trigger the email notification were running.
    Now, we need to enable the notification channel. But, we suspect that all the old emails which are queued in workflow will trigger once we enable the notification and will spam the customers mailbox.
    If this is the case, how can we find and kill the pending email notifications in SCSM 2012.
    Please suggest how to proceed with this.
    Thanks
    Kumaresan Lakshmanan

    Hi,
    Take a look at the end of this post, right Before the appendix:
    http://blogs.technet.com/b/servicemanager/archive/2013/01/14/troubleshooting-workflow-performance-and-delays.aspx
    You will need to increase your watermark if you want to make sure that old notifications won't trigger.
    Regards
    //Anders
    Anders Asp | Lumagate | www.lumagate.com | Sweden | My blog: www.scsm.se

  • Email notification problem on the scsm additional server

    Hi all :)
    we have a SCSM management server with some OS issues, i have been asked to install additional SCSM management server and remove the old one, so i prepared another server and i did install a SCSM management server role on that server (in the installation
    wizard i did point to the Service manager DB from the old server) then the installation has been completed successfully and the new server shows the exact same data as the old one, i have also promoted the new server to be the main server,
    when i shutdown the old server the new server works fine but
    the outbound emails notification doesn't work for some reason, i have
    tested sending an email via telnet using the SCSM workflow account and it works fine !! , any one can help me please ???
    thank u ...

    Hi Mohammed,
    you can make the new server a workflow server by following the guide under Step 1 - Reconfigure the Workflow Server, from the article I posted:
    http://marcelzehner.ch/2012/08/01/dealing-with-multiple-management-servers-33-decommission-old-management-servers/
    but you said, that you have already done it, so your new server has to be the workflow server. This you can check again with the query:
    select DisplayName, [PrincipalName] from [MTV_Computer]
    where [BaseManagedEntityId]=
    (SELECT ScopedInstanceId
    FROM dbo.[ScopedInstanceTargetClass]
    WHERE [ManagedTypeId] = dbo.fn_ManagedTypeId_MicrosoftSystemCenterWorkflowTarget()
    Is this the case?
    Regards,
    Stoyan

  • Can I insert the name poperty of the RequestedByUser related object of the parent Change Request workitem in a review activity email notification template?

    I am working on a SCSM change control workflow driven by email. 
    A lot of my work is based on the information found in this post:
    http://blogs.technet.com/b/servicemanager/archive/2012/04/03/using-data-properties-from-the-parent-work-items-in-activity-email-templates.aspx#pi158453=4
    This is an excellent post to which my Internet searches continually return. The workflow is about 90% complete. 
    My question is can I insert the properties of a related object of the parent workitem in a workflow email notification? 
    For example, I want to include the name property of the RequestedByUser related object of the parent workitem object in a review activity notification.

    Thank you for your reply.  I have confirmed my template is using a projection that includes the parent workitem and requested by user.  Where I am having trouble is the notification template syntax used to call the properties of the related
    object of the parent workitem.  The picker in the GUI won't show that related object, so I have no example to follow.  I hope this reply makes sense!

  • A workflow is sending the same email notification twice

    A workflow is sending the same email notification twice. Not every notification, but this happening only a few times randomly.  The double sent emails are arriving together , have the same date and time.
    I've checked the workflow and found that there is no double sending command in the workflow, and the workflow history also shows just 1 run and 1 email sending.
    Can somebody help me on this.

    Hi Neel,
    For troubleshooting your issue, you can take steps as below:
    1.Increasing the UserDefinedWorkflowMaximumComplexity to 30000 setting using Powershell script
    2.IISRESET
    3.Adding <httpRuntime maxRequestLength="51200" executionTimeout="3600" /> in web.config. Yes, that is "3600" unlike "300" suggested. Please note that there are multiple lines in web.config with <httpRuntime maxRequestLength="51200">.
    I made this change only in the very first one.
    4.IISRESET
    5.Removed everything from C:\Users\<userName>\AppData\Local\Microsoft\WebsiteCache from my laptop
    6.Removed everything from C:\Users\<userName>\AppData\Roaming\Microsoft\Web Server Extensions\Cache from my laptop
    7.Removed everything from C:\Users\USER\AppData\Roaming\Microsoft\SharePoint Designer\ProxyAssemblyCache\ from my laptop
    8.IISRESET
    9.Restart SharePoint 2013 Designer
    Reference:
    https://social.msdn.microsoft.com/Forums/en-US/69b184bf-09ed-4e00-815a-4e40a975c4bf/prevent-sharepoint-2010-workflow-to-send-duplicate-emails?forum=sharepointcustomization
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Add User Input in Email Notification Template

    Hi all, I'm new to SM and in need of anyone's assistance. I've created a service request and in the template under User Input, I have it requesting the "New Users Name" and the "Start or Termination Date". I'd like to add these 2
    inputs into my Email Notification Template. How can this be done? I've been able to insert the Title, Requestor, Alternative Number, and Description in the Template Design but can't seem to find where I can add these Inputs. Any help would be
    appreciated. Thanks in advance.

    Hi,
    Please refer to the link below:
    E-mail user from Service Manager Console
    http://blogs.technet.com/b/servicemanager/archive/2010/02/02/e-mail-user-from-service-manager-console.aspx
    Moreover, the video  [09:00-11:00 min] might be help you:
    Demo: Automating Service Request Fulfillment from the SCSM Service Catalog with Orchestrator
    http://blogs.technet.com/b/servicemanager/archive/2011/11/09/demo-automating-service-request-fulfillment-from-the-scsm-service-catalog-with-orchestrator.aspx
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • I AM RECEIVING MULTIPLE EMAIL NOTIFICATIONS FOR FACEBOOK POSTS. HOW CAN I FIX THIS?

    I AM RECEIVING MULTIPLE EMAIL NOTIFICATIONS FOR FACEBOOK POSTS. HOW CAN I FIX THIS? I AM GETTING LIKE 6 DUPLICATE EMAILS FOR FACEBOOK NOTIFICATIONS. HOW CAN STOP THIS??

    Perhaps you should contact Facebook?

Maybe you are looking for