SCU3 / OY18 / AUT10 what is used for what?

Hi folks - tcodes SCU3/OY18 both seem to relate to same thing - place where you can go to find logs of changes made to tables (IF all the stuff like rec/client setting and SE13 technical setting for the particular table is in effect on the given system)
Recently I came across a tcode AUT10 and in digging in the SAP help it looks like something related to SAP AUDIT TRAIL topic..........but in general, it looks quite similar to SCU3 type info.
Can anyone clarify how this AUT10 stuff would be different than SCU3?
(I assume they both get info from tables like DBTABLOG, CDHDR, CDPOS)
Thanks in advance!!

Hi Ben,
There is no difference between SCU3 or OY18, you can display the change documents of the tables using the tcodes, they both run the same program.
But AUT10 provides us an enhanced options where we can review the changes made in other transactions as well in addition to the table changes.

Similar Messages

Receiver determination in BPM ..what is used for?

Hi everyone.
I've never used 'receiver determination' step in a BPM. I want to know what is used for.
Regards,
Inigo.

you can ref: this link to find example where a receiver determination step is used in BPM- http://help.sap.com/saphelp_nw04/helpdata/en/43/6211b11c895f6ce10000000a1553f6/content.htm
More abt RD step in BPM - http://help.sap.com/saphelp_nw04/helpdata/en/14/d5283fd0ca8443e10000000a114084/content.htm

What does GPRS mean? what is it? what is used for?

I have a nokia device that says it supports GPRS as a conectivity option, so......what is GPRS? what is used for?
Could anyone explain please, explain it to me?
Thanks.

http://en.wikipedia.org/wiki/General_Packet_Radio_Service
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

What is disk utility, what is used for?

What is disk utlity, & what it used for?

It is used for a variety of things, including disk repair (if the data structures that keep track of data on the disk get corrupted), repair of permissions on the system files if they get messed up, erasing and partitioning disks, etc. As Linc points out, Disk Utility's help can give you all the details. Note that some things cannot be done to the system drive unless you start up from a different drive.
Also, note that if you're asking because you're deleting apps that you don't use, you really shouldn't do that with the preinstalled Apple apps, even if you think you don't have a use for them. Sometimes deleting them can have unexpected side effects, and you never know when you might need such an app.

What is used for WebDynpro for ABAP?

hi all friends,,
what is used for WebDynpro for ABAP?
Thanks,
S.Suresh.
Title was edited by:
        Alvaro Tejada Galindo

Hi
Web Dynpro for ABAP - Getting Started
Web Dynpro for ABAP is SAPs new standard UI technology for developing user interfaces in the ABAP environment. In the long term Web Dynpro for ABAP will be the successor of the traditional screen (Dynpro) based user interface technology which is based on the SAP GUI. Available with NetWeaver 7.0 (2004s) Web Dynpro for ABAP provides the same declarative UI development paradigm as Web Dynpro for Java directly out of the NetWeaver ABAP Application Server. Web Dynpro for ABAP allows the development of user interfaces directly within the ABAP Workbench (SE80) and the Web Dynpro runtime environment is a central part of the ABAP server and can be used in any SAP solution based on NetWeaver 7.0 (2004s) without the need of an additional server installation.
Web Dynpro for ABAP allows the development of user interfaces in a declarative way by providing a mighty framework which abstracts the rendering technology from the core UI definition tasks. The Web Dynpro developer declares the layout and behavior of the UI without caring about HTML, JavaScript, browser specifics or the HTTP protocol. Instead the focus lies on designing graphically Web Dynpro components based on the Model View Controller model, which enforces a clear separation between the UI layer and the underlying business logic.
This declarative Web Dynpro programming model enforces the developer to focus on the tasks of
Designing the layout of the visible views (where should the table be placed, do I need tabs, how should the button look?)
Declaring the flow and behavior of the application (flow between views, which event is triggered by which button click, etc)
Defining the data binding (which internal table is displayed in a specific table, etc)
Implementing the event handlers and controller methods.
Without making any assumption about the used rendering technology, like which browser should be supported or if the Web Dynpro application will be later displayed in a web browser via HTML at all or in another kind of client with completely different rendering capabilities.
The Web Dynpro Frameworks provides all important UI features directly out of the box:
All elements (tables, buttons, trees, dropdown list boxes, etc) necessary for state of the art user interfaces are provided by the Web Dynpro Framework in the form of predefined UI element libraries.
Complex features and behavior of UI elements.
Internationalization of the UI. All visible strings in a Web Dynpro ABAP UI are handled by the translation system and are translated in the same translation environment like other ABAP language dependent resources. All texts are displayed automatically at runtime, dependent of the users credentials.
Accessibility features are directly built into the framework and UI elements.
A unified rendering engine generates at runtime the data which is sent to the specific client application, which is not limited to browsers but includes the NetWeaver Business Client.
All this is available in the established environment of the ABAP application server and well known capabilities like the transportation and change management system, security environment, test and performance analysis tools or remote debugging can be used like in common ABAP development.
Learn about the Web Dynpro for ABAP technology with the resources below, and post your related questions and answers to the Web Dynpro forum.
Web Dynpro for ABAP: Sneak Preview
Download, License Key Documentation, and Installation Guide available here.
Web Dynpro for ABAP: Tutorials for Beginners
SAP NetWeaver Product Management provides this set of tutorials for getting started with Web Dynpro for ABAP technology.
SAP Help Portal: Web Dynpro for ABAP
This online SAP documentation goes into detail about Web Dynpro architecture and programming, Web Dynpro for ABAP administration and security, and more.
Web Dynpro - Not Just for Java Developers Anymore   (PDF 3.8 MB)
In this SAP Insider article, SAP Product Manager Karl Kessler describes the tools of Web Dynpro for ABAP and uses a simple flight report example to highlight new and updated tools in the familiar ABAP environment.
Community Contribution: WDA Tutorial I - Getting Started with Web Dynpro for ABAP   (PDF 2.5 MB)
Software Engineer Rich Heilman provides this step-by-step guide for developing a Web Dynpro for ABAP application.
Going into Details
Basic Concepts - Selection vs. LeadSelection
In this blog, Thomas Szuecs of the Web Dynpro for ABAP development team shows how selection and LeadSelection works in Web Dynpro for ABAP.
Web Dynpro for ABAP: Recreate the SE16 Data Browser   (PDF 386 KB)
In this tutorial, Thomas Jung of SAP NetWeaver Product Management shows how to create a data browser simulator using Web Dynpro for ABAP.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/80aef577-543f-2a10-d19c-d83a565efe37 [original link is broken]
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

Bapi_Busprocessnd_Procsettings is used for what...?

Hi ,
Can anybody out there explain Bapi_Busprocessnd_Procsettings is used for what? Actually I have been trying to create sales order remotely. And I need to call this BAPI to persist the data, even if I do Transaction Commit.
Thanks a lot

Hi Rajan,
I haven't used this BAPI but you can take a look at following programs/Function modules to the usage of this BAPI. From what I understand this BAPI is used to set the process settings such as (save = true) if you want to commit the data when calling the BAPI's remotely.
Report - CRM_CALL_ACTIVITY_INTERFACE (Demo Program to Call External Interfaces of Activities )
LCRM_BUSPROCESSND_BAPIF19
LCRM_BUSPROCESSND_BAPIU01        Save and install sales orders [implementation]
LCRM_BUSPROCESSND_BAPIU02        Delete and save sales orders [implementation]
LCRM_BUSPROCESSND_BAPIU03        Generate sales orders [implementation]
LCRM_BUSPROCESSND_BAPIU05        Change sales orders [implementation]
Also if you want to save the transaction you could use the BAPI BAPI_BUSPROCESSND_SAVE.
Hope this helps!

IT 2004 - Availability is used for what?

Hi buddies,
I am curious about what the usage of infotype 2004 - availability.
Can anybody explain IT2004 is used for what?
An explenaition with senario will better
Thanks in adv.
Br,Kee

HI Kee,
You can use the Availability infotype (2004) to enter different types of work availability duties. A
typical availability type is on-call duty.
In the R/3 Human Resources (HR) component, an availability is work performed
outside of an employeeu2019s planned working time. When you create an availability, the
system does not overwrite the employeeu2019s work schedule.
Availability types are subtypes of the Availability infotype (2004). The standard R/3 System
includes the following availability types:
Subtype 01: On-call duty
Subtype 02: On-call duty <=10%
Subtype 03: On-call duty <=25%
Subtype 04: On-call duty <=40%
Subtype 05: On-call duty <=49%
Warm Regards,
Kapil Kaushal

HT201320 I use my college's email address through outlook and I don't know what you use for the incoming and outgoing host?

My email is though the college where I work. We use Outlook, and I am trying to set up my email but I am not sure what to use for my incoming and outgoing host information.

Ask your college. Most likely the same settings as you have set in Outlook.

Which legacy systems are used for what purpose?

Hi gurus,
I tried looking in this forums, but couldnt gather much information on which legacy systems are used and for what purpose? <b>can any body send me a link that can help me understand when and where, which systems are used for what purpose..</b> I have a general understanding of Legacy systems so i am not looking for terminology explanation, i would appreciate any thing that is related to business and explains the purpose.
thanks,
kishore karnati

Hi,
Term legacy system means tailor made system by group of software developer or any branded software which deals with the group requirement like tally we user for finance.
Legacy system can be based on any technology like visual basis as front end and oracle as back end or Developer 2k as front end and oracle as back end. For report most of the legacy system we have seen uses crystal report.
You can develop and implement based on the requirement from the user though you need to define some specify process to keep the system streamline which is in your hands.
Concept like devlopment/quality/production we don't have that verys strict concept.
More and more they are not intergrated each other functionally mean lets say inventory has come to the godown then your vendor outstanding should increase in finance which does not happens you need to key in the seperate value for it.
Hope this helps!!!

What to use for INITIAL_CONTEXT_FACTORY for Sun AppServer Platform Ed 8x

I've got an external java JMS client trying to connect to Sun Java System Application Server Platform Edition 8.1 2005Q1 and I need to know what to use for the Context.INITIAL_CONTEXT_FACTORY (and what jar it's in) plus the PROVIDER_URL for the following code:
Properties p = new Properties();
p.setProperty(Context.INITIAL_CONTEXT_FACTORY, ????);
p.setProperty(Context.PROVIDER_URL, ????);
Context ctx = new InitialContext(p);
QueueConnectionFactory qcf = (QueueConnectionFactory)ctx.lookup(factory);

I experienced similar problems while trying to create a Message Driven Bean
and send a message to it from a standalone client program.
After much guddling around (and finally finding some helpful information in
the App Servers Troubleshooting Guide) I managed to get this to work by doing
the following:
     1) Including the following jars at client compile time:
          appserv-rt.jar
          j2ee.jar
     2) Including the following jars at client run time:
          appserv-rt.jar
          j2ee.jar
          appserv-admin.jar
          imqjmsra.jar
     3) Passing in the following arguments at client run time:
          -Dorg.omg.CORBA.ORBInitialHost=localhost
          -Dorg.omg.CORBA.ORBInitialPort=3700
     4) Creating the context using the no-arg InitialContext method � i.e.
          Context ctx = new InitialContext();
     Note that this method picks up the initial context factory
     as com.sun.enterprise.naming.SerialInitContextFactory from
     a jndi.properties file in appserv-rt.jar.
I have included my client code below FYI.
import javax.jms.Connection;
import javax.jms.ConnectionFactory;
import javax.jms.JMSException;
import javax.jms.MessageProducer;
import javax.jms.Queue;
import javax.jms.Session;
import javax.jms.TextMessage;
import javax.naming.Context;
import javax.naming.InitialContext;
import java.util.Date;
* @author dlowe8
public class JmsTest2 {
/** Creates a new instance of JmsTest2 */
public JmsTest2() {
public static void main(String[] args) {
Connection c = null;
try {
Context ctx = new InitialContext();
String factoryJndiName = "jms/ConnectionFactory";
String queueJndiName = "jms/Queue";
System.out.println("Factory JNDI Name = " + factoryJndiName);
System.out.println("Queue JNDI Name = " + queueJndiName);
     ConnectionFactory cfa = (ConnectionFactory)ctx.lookup(factoryJndiName);
     c = cfa.createConnection();
Session s = c.createSession(false, Session.AUTO_ACKNOWLEDGE);
Queue q = (Queue)ctx.lookup(queueJndiName);
MessageProducer producer = s.createProducer(q);
TextMessage m = s.createTextMessage();
m.setText("Helloooo from standalone program at " + new Date());
producer.send(m);
s.close();
Object o = ctx.lookup(factoryJndiName);
System.out.println("Factory object class [" + o.getClass().getCanonicalName() + "]");
o = ctx.lookup(queueJndiName);
System.out.println("Queue object class [" + o.getClass().getCanonicalName() + "]");
} catch (Exception e) {
e.printStackTrace();
} finally {
if (c != null) {
try {
c.close();
} catch (JMSException e) {}
System.exit(0);
}

What to use for the events of 2 keys pressed simultaneously?

Question:
What to use for the events of 2 keys pressed simultaneously? As the key listener has limited functionality, in this case, I need something that can act to two events (see below)
Goal
1. A user presses right and up at the same time
2. Program responds to this event changing BOTH the vertical and horizontal speeds of the player
Problem
I currently have a key listener to do this, using key pressed, however, it only acts to up OR right at one point in time. So the user can only increase his or her vertical speed; or horizontal speed at one point in time. Instead of increasing them both.
Example
Here is an example of the game: http://www.kongregate.com/games/MINDistortion/bubbles-2

DarrylBurke wrote:
I don't know whether there's a better way (or whether this will work as expected), but I would try setting a boolean flag on keyPressed and reset the flag on keyReleased, for each key of interest. To compute the x / y movements, I would check the state of all flags.
dbI was thinking about your answer a few nights ago. And I was like, wait... it works! I thought, at first (as I replied before) that it wouldn't work, but I refract what I said. Its actually a very simple solution. And I apologize for questioning your solution previously. Thanks so much!
P.S. I tested it out. Works like a charm.
-Create booleans to handle each key
-Set to true on press
-Set to false on release
-Check and update in separate thread accordingly

What to use for flash player

What to use for flash player?

There is no flash player for IOS. Adobe is removing flash from all mobile devices. There are some browsers in the app store like skyfire but they have mixed reviews and only work on limited content.

What's use for Customer Hierarchy

Dear Guru
What's use for Customer Hierarchy? give me a step to config?
regards
Mohammed Renu.I

Hi Mohammed Renu,
CUSTOMER HIERARCHY:
Customer hierarchies are available in Sales and Distribution, so that you can create flexible hierarchies to reflect the structure of customer organizations. If your customer base includes multi-level buying groups, cooperatives, or chains of retail outlets, for example, you can create hierarchies to reflect the structure of these groups. Use customer hierarchies during sales order processing and billing for determining pricing and running statistics.
 A customer hierarchy consists of nodes.
 To create a customer hierarchy:
1. Create master records for each node.
2. Assign the nodes to each other.
3. Assign the customer master records to the relevant nodes.
 Hierarchy nodes are only valid for a certain period of time. They may also be moved. If a node is moved, the system automatically reassigns all related nodes and customer master records.
With customer hierarchies, you can assign price or rebate agreements to a higher level node. The agreements are then valid for customers at all subordinate levels to this node. You can create pricing condition records for each node indicated as relevant for pricing. If one or more nodes in the hierarchy path of a sales order contain pricing information, the system takes them into account automatically during pricing.
'How to check'
All the customizing is in SD/Master Data/Business Partner/Customers/Customers hierarchy
All the customizing is in SD/Master Data/Business Partner/Customers/Customers hierarchy
1) Define hierarchy type: just put and ID and a name to the new hierarchy.
2) Set partner determination: if you want to user the hierarchy in price determination, then, in the orders, at the header level, you have to have a Partner Procedure with a partner function for each level. In the partner procedure, in each partner function you must indicate the source partner function. With this information, in the order, you obtain the business partner for each partner function.
3) Assign account groups: you indicate which accounts groups are allowed for being part or your hierarchy.
4) Assign sales areas: simple you indicate which sales areas are allowed in your hierarchy. (Here you can customize common sales areas, just for not having to build de hierarchy in all the different sales areas).
5) Assigning hierarchy type for pricing: you indicate which classes of documents uses hierarchy in pricing determination.
It is possible to maintain so called customer hierarchies. This might be useful when for example you create a condition discount for a customer that is part of such a hierarchy structure. All subnodes in the hierarchy below that customer, will thus receive the same discount.
Customer hierarchy setup, firstly decide the hierarchy type to be used.
The standard is type A.
You can also assign a partner function to the customer so that the higher level customer in the hierarchy is copied into a sales order as a partner function - but you don't need that right?
Next assign your customer account group to the hierarchy type. And enter the combinations that will be allowed for creating the hierarchy.
You want to assign a ship-to to a payer. So enter the ship to account group and enter the payer account group as the higher level.
You must also make an entry for permitted sales area assignments. So if you want to a hierarchy for customers in the same sales area then enter the sales area and enter the same one as the higher level sales area.
All these settings can be found in the IMG. Under SD - master data - business partners - customers - customer hierarchy
You use for example customer hierarchy when you have an company like Unilever and you agree both on a discount. Unilever does have different locations / businesses and you have to maintain the discount for all customers. If you use a customer hierarchy you can maintain the discount for the partner in the top of the hierarchy and in this way it will be valid for all customers in the hierarchy.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

What format used for exporting and read 1920 * 1080 HD windows media?

hello,
what format used for exporting and read 1920 * 1080 hd in windows media ?
i try many format and windows media refused to read ...
merci thanks
Yves

thanks, sorry, but i want produce small clips for many caritatives organisms their computer have only Windows media ....and no many used of internet...
this morning, i try format windows media , hdtv 25 i/s high quality ...i'll try read it on another computer ...on my computer, it's ok ....

2 iTunes accounts, unable to change what is used for "updates" on iPad.

Sorry - this might sound confusing, but I'll try to explain.
I have 2 iTunes account. My primary Canadian and a US account.
The US account is only for those situations where I have to redeem a free promo code, etc.
The problem I'm having is that for normal, every day use my standard account is what I use to download and update applications.
However now when I try to "Update" apps from the iPad directly, it tries to use my US store account and, since the applications were purchased from my default account, I cannot update them directly on the iPad.
Updating them on my PC through iTunes works just fine, however.
I don't know what I need to do to fix this.
I've signed out everywhere I can on my iPad and signed back into my default account.
I've done the same through iTunes, I make sure whenever I sync my iPad, I am signed in on my default account.
Any time I download on the iPad, I generally only use my primary account, and there are no issues with the initial download.
Any suggestions...??? Did I clarify enough?
Thanks!

When you originally set up the iPad did it or does it ask you to log into your iTunes or possibly we're you logged into your US account when you connected your iPad for the 1st time. Have you done a full restore on your iPad...start fresh not a restore from back up.

SCU3 / OY18 / AUT10 what is used for what?

Similar Messages

Maybe you are looking for