Sculpture Object Automation
I want to make changes to the position of object 1 and 3, and make changes to the strength of object 3 during my project.
First thing I tried was using Automap Server and Novation midi controller, map expression pedal to object 1 location, a slider for object 3 strength, a knob for object 3 position. Recorded in Latch mode. While played, I could hear effect of moving the knobs, but played back in Read mode, no change in sound
Then I looked at the automation settings for object strength and location and saw you need to set morph points with different positions.
Example: Point A has object 1 position 45, Point C position 5
I created object location A and C automation tracks for object 1.
Tried criss-crossing lines, keeping one track at 0 and moving the other from 0 to 100. Nothing moving
Mode buttons beneath morph pad: Pad on Env off
Use the first one on the list "MorphPnt 0 Object position"
Similar Messages
-
Hi,
I'm have a dashboard where my data's are coming from different team. The different teams are sending data thru email. So, i'm collecting the data and implement into the dashboard manually.
Is there any possible ways to do automation in BO instead of feeding data manually each time in dashboard.
I have did Semi automation, i loaded all the data into access db which i have received from mails from different team. Then i have created universe and connceted to that access db. so thru by query browser, i connected to universe and mapped all the datas in dashboard. So data will get refresh automatically.
But instead of loading all datas manually each and every time, is there any possible to do automation in BO or Xcelsius.
Can anyone give suggestion on this. How to avoid email datas and how we can laod data autoamtically into database.
Regards,
RajeshYou have to automate this before it gets to BO. Collecting data via emails is obsolete.
give your users mobile apps connected to your backend DB for automated , up to date data storage, then connect BO to that DB for proper reporting.
BO purpose is to report of the data already collected. Collection of data is not BO's purpose. -
No recording of MIDI Controllers in MIDI Track Automation
Surely we need to have MIDI CC recordable as track automation on a MIDI instrument track just the same as it can be recorded to faders in audio Instrument tracks via a transformer. I know there are work arounds like recording to standard object automation then moving to track automation but I want to see all my recorded modulations at once as track automation for all my Logic instruments and MIDI instruments without wasting any time.
This gets asked at least once a week.
From about ten posts underneath this one:
http://discussions.apple.com/thread.jspa?threadID=2095452&tstart=0
Also is there a way to record all of v-drum midi data into separate tracks?
Record into one track, then use the Split/Demix by Note Pitch function to put each MIDI note into it's own track. -
Cannot get Osoft virtual directory object: (SAP BPC 7.5 sp08 issue)
Hi SDNer
I am facing a different issue after installing sap BPC 7.5 sp08. i ran server diagnostics when i login with a domain user (domain name\bpc_sysadmin) and i see error message as :
cannot get Osoft virtual directory object: Automation error the system sould bot find path specified- incorrect
but when i run the diagnostics after logging in with local user Administratot- all green and its ok.
can some one through views...
regards
KevinHi,
Check below 2 threads:
Error in IIS Configuration while Server Diagostic
Cannot get OSoft virtual directory object
Also, make sure that IIS settings are correct. Check SAP note 1532499.
Thanks
Sunny -
Data Services (BODI) password file synchronization by external application
Hello,
Question: Is there any batch/shell process that update the BODS password file?
Issue: An external system (P-Synch) change the developper repository passwords every 60 days. The passwords have to be changed manually on the BODS server or account get locked.
Objective: Automation of BODI password syncrhonization (reset) on the server.
My dream: application_cmd -Repsoitory -Account -Password
Thank you,There's not a good option for that.
In the past, there was ABC Amber IPD converter which could extract or convert data from backup files to CSV or text files, but ABC is no longer available and I don't know of another IPD file extractor.
I don't know of another option. Let's see if someone else might.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Error in IIS Configuration while Server Diagostic
Hi Guys,
While running the Server Diagnostic, I get error on IIS Configuration Step.
X Osoft virtual directory
X Cannot get Osoft virtual directory object: Automation error The System cannot find the path specified -Incorrect
I am not able to send the the data to the server also. when I try to send the data it says..." an error occured while communicating with the web server"
Not sure though that this error is because of Osoft virtual Directory...
Any one faced this problem?RaciMishra,
Please check out SAP Knowledge Base article 1532499. Doing this fixed my problem with installing BPC 7.5 SP07 on my Win 2008 R2 .NET server and all my lights now show up green for the Diagnostic screen.
Symptom
When running BPC server diagnostics, the following error is displayed on the IIS Configuration item:
"Cannot get OSoft virtual directory object: Automation error. The system cannot find the path specified. - Incorrect."
Resolution
The resolution to this problem is to disable User Account Control on Windows Server.
To turn off UAC
Click Start, and then click Control Panel.
In Control Panel, click User Accounts.
In the User Accounts window, click User Accounts.
In the User Accounts tasks window, click Turn User Account Control on or off.
If UAC is currently configured in Admin Approval Mode, the User Account Control message appears. Click Continue.
Clear the Use User Account Control (UAC) to help protect your computer check box, and then click OK.
Click Restart Now to apply the change right away, or click Restart Later and close the User Accounts tasks window.
- Dave Wollenweber -
Why does my Fieldpoint OPC server time out?
I'm using Fieldpoint Explorer 3.01 with 1600 ethernet modules. I'm using Wellspring Solutions' Object Automation as an OPC client to read and write to I/O. Everything works fine on one computer running Win NT 4.0. Another computer, however, is running NT Server 4.0, and the OPC reads/writes from Object Automation work for exactly 1759 seconds (or approx. 121 minutes), and then the Fieldpoint Server "times out", and the only way to get it to work again is by shutting down and restarting Object Automation, assumedly this somehow reinitializes communication with the server. This is a repeatable error that occurs at exactly the same time, every time. This only happens with the National Instruments Fieldpoint OPC server (I'm
using several) on one of the machines. I tried reinstalling the Fieldpoint OPC Server several times to no avail. I've used other OPC clients (from OPTO22, or Rockwell, Matrikon, Kepware) and can't communicate until Object Automation is shutdown and restarted. Any help or ideas on how to further troubleshoot would be appreciated, thanks.Aaron, attached are 3 log files generated in a test that I ran. The test used Object Automation to turn on and off a relay channel (OPC item: Common FP Res\FP-RLY-420 @4\Channel 1) every 10 seconds. I used the Matrikon OPC delegator with the OPTO22 Test Client (written by Rockwell) to monitor the channel at the same time (the delegator would NOT work with Object Automation directly). The OPCDelegatorOPTO22TestClient.txt file is the log file for this client. Basically, the test started around 13:07 and lasted the usual 121 minutes. Then the OPC writes stopped around 15:08, at which time I tried to manually read and write to the channel using the OPTO22 client, generating the errors towards the end of the logfile. Incidentally, I don't k
now what the errors at the beginning of the file are, but there are no noticable problems until after 121 minutes. I then tried to use the Kepware OPC test client with delegator to read and write to the channel but this also did not work, and the logfile OPCDelegatorKepwareTestClient.txt is for that test. The other logfile (OAlogfile.txt) is the logfile generated by OA, see the end of file for the error. They should all be text files, not sure why one of them is listed as binary below. Let me know if this helps or if there is anything else I can provide.
Attachments:
OAlogfile.txt 526 KB
OPCDelegatorKepwareTestClient.txt 50 KB
OPCDelegatorOPTO22TestClient.log 517 KB -
He guys!
There is a question about creating the xquery testing environment.
I have Altova XML Spy editor to write xquery. How to load OSM automation classes which xquery script will see in xml spy runtime?
Typical xquery automator contains next external objects:
automator, outboundMessage, context. How to declare this variables in xml spy for debuging goals?The problem was solved by using SaxonB implementation of Xquery processor.
The sample application for testing xquery scripts for automation cartridges:
package xq;
import net.sf.saxon.query.*;
import net.sf.saxon.Configuration;
import java.io.*;
import java.util.Properties;
import java.util.logging.Logger;
import javax.xml.transform.OutputKeys;
import javax.xml.transform.stream.StreamResult;
import javax.xml.transform.stream.StreamSource;
import javax.jms.QueueConnection;
import javax.jms.QueueConnectionFactory;
import javax.jms.QueueSession;
import javax.jms.TextMessage;
import oracle.communications.ordermanagement.automation.plugin.XQuerySender;
import com.mslv.oms.automation.*;
import org.apache.commons.logging.*;
public class XQueryAutomatorCustom {
@SuppressWarnings("deprecation")
public static void main(String[] args) {
String xQueryFileName="query.xq";
String inputXMLFileName="input.xml";
if (args.length==2)
xQueryFileName=args[0];
inputXMLFileName=args[1];
try {
java.util.Hashtable env = new java.util.Hashtable();
env.put(javax.naming.Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
env.put(javax.naming.Context.PROVIDER_URL, "t3://ip:port");
javax.naming.Context ctx = new javax.naming.InitialContext(env);
QueueConnectionFactory qconFactory = (QueueConnectionFactory) ctx.lookup("test/jms/ConnectionFactory");
QueueConnection qcon = qconFactory.createQueueConnection();
QueueSession qsession = qcon.createQueueSession(false, javax.jms.Session.AUTO_ACKNOWLEDGE);
TextMessage msg = qsession.createTextMessage();
Configuration config = new Configuration();
StaticQueryContext staticContext = new StaticQueryContext(config);
XQueryExpression exp = staticContext.compileQuery(new FileInputStream(xQueryFileName), "UTF-8");
DynamicQueryContext dynamicContext = new DynamicQueryContext(config);
dynamicContext.setContextNode(config.buildDocument(new StreamSource(
new File(inputXMLFileName))));
dynamicContext.setParameter("outboundMessage", msg);
dynamicContext.setParameter("context", new TaskContextBean());
dynamicContext.setParameter("log", LogFactory.getLog(XQueryAutomatorCustom.class));
dynamicContext.setParameter("automator", new XQuerySender());
Properties props = new Properties();
props.setProperty(OutputKeys.METHOD, "xml");
props.setProperty(OutputKeys.INDENT, "yes");
exp.run(dynamicContext, new StreamResult(System.out), props);
System.out.println("\n**************\nAssigned corrID: "+msg.getJMSCorrelationID());
} catch (Exception e) {e.printStackTrace(); System.exit(0);
build.xml file:
<project name="xq_test">
<path id="class.path">
<pathelement location="C:\saxon\saxonb\saxon9.jar" />
<pathelement location="D:/wlserver/server/lib/wljmsclient.jar"
/>
<pathelement location="C:/OSM/SDK/Automation/automationdeploy_bin/automation_plugins.jar"
/>
<pathelement location="C:/OSM/SDK/Automation/automationdeploy_bin/commons-logging-1.1.jar"
/>
</path>
<target name="cli">
<java classname="net.sf.saxon.Query" classpathref="class.path">
<arg value="-t" />
<arg value="-s:GetOrder.xml" />
<arg value="-q:query1.xq" />
<classpath>
<pathelement location="C:\app\research\saxon\saxonb\saxon9.jar"
/>
</classpath>
</java>
</target>
<target name="run">
<java classname="xq.XQueryAutomatorCustom"
classpathref="class.path"
classpath="bin"
>
<arg value="sw_create_sender.xq" />
<!--arg value="createwacallback_element.xml" /-->
<arg value="response.xml" />
</java>
</target>
</project>
Edited by: 889824 on 06.10.2011 2:05 -
How to call a Servlet file from a Stored Procedure?
You need to make an http request to the web server where the servlet is running. To do this you have two options:
Using object automation stored procedures (sp_OA* procedures) to create and call MSXML2.XMLHttp COM objects.
Create a CLR stored procedure that uses HttpWebRequest class.
On the other side. Making web request from stored procedures is the last resort. Have you considered other alternatives to solve the bussines problem at hand?
For example Service Broker can be an alternative for that kind of problems. The stored procedure sends a message to the queue. An external program reads messages as it arrives to the queue and process them. The external program can be written in Java and
can run in the web server where the servlet runs.
EntityLite: A Lightweight, Database First, Micro ORM -
Using iSetup for day-to-day change management
We are an existing 11.5.10.2 e-business shop with many instances and many release flows. We've done a little bit of foundation object automation with fndload (just conc programs and request sets). We're contemplating using iSetup for day-to-day migration of of other foundation objects from instance to instance. We have very strict segregation of duties so the folks who do the migrations are not very oracle knowledgable. Thus developers must create detailed instructions for entering the foundation objects, possibilities for error are higher than we'd like, entry is very time consuming, etc.
I've noticed that the general advertised thrust of iSetup is for new implementations. Is there anything wrong with the concept of using if for new/changed foundation objects (conc prog, req set, responsibilities, profile options, dff's, menus, and anything else it can do)? Any thoughts on pros and cons of using iSetup versus scripting fndload for each object?Hi,
iSetup can be used for both fresh implementations as well as existing ones similar to what you have described in your question.
For some of the setups viz. Foundation objects, iSetup does internally use FNDLOAD.
The advantage of using iSetup vs. Scripting is:
Reporting and the Load Orchestrating mechanism which is built into iSetup. For e.g within Foundation Selection Set available in iSetup - KFF, DFF, MENU, RESP etc. Loading sequence is managed by iSetup. You could also generate Comparison Reports for before and after Load etc. which would not be possible if you used scripting alone.
iSetup also supports native APIs written as per iSetup fwk specs and they are more rich in terms of features viz. Filtering, Transform etc.
Thanks, -
Admin Console Tasks not visible
Dear Experts,
We've installed BPC 7.5 NW version. Post the installation, we are trying to log in as system administrator to create a new application set based on default "Appshell". But the in the action pane no admin console tasks are appearing although administration for web is appearing. What can be the issue here? I have also performed the system diagnostics after running the same am getting an error "Cannot get Osoft Virtual Directory Object: Automation Error system cannot find the path specified".
Help on this matter is appreciated.Hi Alok,
Thanks for your prompt answer. However, the problem is that the path drive:\WINDOWS\microsoft.net\Framework\v1.1.4322\Temporary ASP.NET Files\osoft\7ab1b945\cd624ca5\assembly\dl2\12adf122\0053d573_c606c701 doesnot exist. As in, under Temporary ASP.NET Files there is no folder called Osoft.
We have put the Antixsslibrary.dll under <system drive>:\Program Files\Microsoft Corporation\Anti-Cross Site Scripting Library V1.5\Library\.NET 1.1.
Also we have only Microsoft .NET framework 1.1.
Kindly let us know what can be the possible remedy.
One more thing, we have not installed BPC for Office client. Will that cause some issues??
Thanks in advance.
Edited by: Appu Del on Jun 20, 2011 3:35 PM -
Can Automation be used to send User-defined CC's to Environment objects?
Hi, this is probably a really dumb question but I'll ask it anyway:
I've bought a controller-environment for a synth (Alphajuno2, PG300 programmer) for Logic, the faders in the environment layer use sysex to communicate with the synth.
Apparently it is possible to map an external midi-controller to these environment-faders, and that's all and fine, but what I'm after is a method of using automation to control the environment-faders. How would I go about doing it?
I've only ever really automated some volume changes or plugin parameter changes, I've not yet automated faders in the environment, so how would I go about doing it?
Would I create a fader which I'd link to the sysex-sending fader, and automate the fader, or maybe an environment-monitor (and add it to the arranger) and somehow configure a set of CC#'s to be automated with that arranger object, and then just cable them up to the various Sysex-sending faders (I do know enough to be able to set the input of those sysex-faders to match the CC#'s which the automation would be sending).
Is this kind of "User-defined CC#'s in Automation" possible? How should I go about it?
Message was edited by: esaruoho to further clarify itIs it just because there is currently no way whatsoever of Automation CC, and I should have known to use Hyper Draw to talk to an Environment object directly, which would then be connected to the Faders of choice?
-
BEx Error: Automation error: Object invoked has disconnected from clients
Hi,
We have a user here that attempts to access a query in BEx (MS Excel), but receives this error message:
- Runtime error '-2147417848 (80010108)':
Automation error
The object invoked has disconnected from its clients.
Any ideas.
Thanks,
JohnPlease go through the OSS note 857360..
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=857360&_NLANG=E
This talks about your error..
Solution
1) Replace the RFC library
librfc32.dll
on the client PC with a current version.
620: Version >= 6206.6.1938.4727 (620x.x.x.4727).
640: Version >= 6400.3.79.4740 (640x.x.x.4740).
There is a version of the 620 and 640 librfc32.dll in the attachments: and we recommend that you use Version 640 (compatible with SAPGUI 620) (see below).
620 Version: Download librfc32.rar. Rename it librfc32.exe. This file extracts itself automatically.
640 Version: Download librfc32.zip. You can use WinZip to extract this file.
Note:
It seems that newer (delivered) versions of 6.20 librfc32.dll do not contain this fix. In this case, you can also use the 6.40 librfc32.dll. For reasons of compatibility, you should use the following Microsoft DLLs that are available on the PC for this: msvcr71.dll and to be msvcp71.dll (see Note 684106). -
OLE objects and OO methods - Error using OLE automation
Hi,
I'm developing an class to read/write excel sheets and i'm getting an error on the OLE method that is:
on this instruction
call method of l_obj_excel 'WORKBOOKS' = l_workb_col.
i got a dump that give me the following error UC_OBJECTS_NOT_CONVERTIBLE
The strange is that i've got the same code running on reports and it works fine only when passing it to a oo method i get that dump.
Thzs in advanced to all
Best regards
Jaimehi check this..
Report ZMULTICOLOR_TEST no standard page heading.
this report demonstrates how to send some ABAP data to an
EXCEL sheet using OLE automation.
include ole2incl.
handles for OLE objects
data: h_excel type ole2_object, " Excel object
h_mapl type ole2_object, " list of workbooks
h_map type ole2_object, " workbook
h_zl type ole2_object, " cell
h_f type ole2_object, " font
h_c type ole2_object. " color
DATA: FILENAME LIKE RLGRAP-FILENAME.
tables: spfli.
data h type i.
table of flights
data: it_spfli like spfli occurs 10 with header line.
*& Event START-OF-SELECTION
start-of-selection.
read flights
select * from spfli into table it_spfli.
display header
uline (61).
write: / sy-vline no-gap,
(3) 'Flg'(001) color col_heading no-gap, sy-vline no-gap,
(4) 'Nr'(002) color col_heading no-gap, sy-vline no-gap,
(20) 'Von'(003) color col_heading no-gap, sy-vline no-gap,
(20) 'Nach'(004) color col_heading no-gap, sy-vline no-gap,
(8) 'Zeit'(005) color col_heading no-gap, sy-vline no-gap.
uline /(61).
display flights
loop at it_spfli.
write: / sy-vline no-gap,
it_spfli-carrid color col_key no-gap, sy-vline no-gap,
it_spfli-connid color col_normal no-gap, sy-vline no-gap,
it_spfli-cityfrom color col_normal no-gap, sy-vline no-gap,
it_spfli-cityto color col_normal no-gap, sy-vline no-gap,
it_spfli-deptime color col_normal no-gap, sy-vline no-gap.
endloop.
uline /(61).
tell user what is going on
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
PERCENTAGE = 0
text = text-007
exceptions
others = 1.
start Excel
create object h_excel 'EXCEL.APPLICATION'.
PERFORM ERR_HDL.
set property of h_excel 'Visible' = 1.
CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:\kis_excel.xls' .
PERFORM ERR_HDL.
tell user what is going on
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
PERCENTAGE = 0
text = text-008
exceptions
others = 1.
get list of workbooks, initially empty
call method of h_excel 'Workbooks' = h_mapl.
perform err_hdl.
add a new workbook
call method of h_mapl 'Add' = h_map.
perform err_hdl.
tell user what is going on
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
PERCENTAGE = 0
text = text-009
exceptions
others = 1.
output column headings to active Excel sheet
perform fill_cell using 1 1 1 200 'Carrier id'(001).
perform fill_cell using 1 2 1 200 'Connection id'(002).
perform fill_cell using 1 3 1 200 'City from'(003).
perform fill_cell using 1 4 1 200 'City to'(004).
perform fill_cell using 1 5 1 200 'Dep. Time'(005).
loop at it_spfli.
copy flights to active EXCEL sheet
h = sy-tabix + 1.
if it_spfli-carrid cs 'AA'.
perform fill_cell using h 1 0 000255000 it_spfli-carrid.
elseif it_spfli-carrid cs 'AZ'.
perform fill_cell using h 1 0 168000000 it_spfli-carrid.
elseif it_spfli-carrid cs 'JL'.
perform fill_cell using h 1 0 168168000 it_spfli-carrid.
elseif it_spfli-carrid cs 'LH'.
perform fill_cell using h 1 0 111111111 it_spfli-carrid.
elseif it_spfli-carrid cs 'SQ'.
perform fill_cell using h 1 0 100100100 it_spfli-carrid.
else.
perform fill_cell using h 1 0 000145000 it_spfli-carrid.
endif.
if it_spfli-connid lt 400.
perform fill_cell using h 2 0 255000255 it_spfli-connid.
elseif it_spfli-connid lt 800.
perform fill_cell using h 2 0 077099088 it_spfli-connid.
else.
perform fill_cell using h 2 0 246156138 it_spfli-connid.
endif.
if it_spfli-cityfrom cp 'S*'.
perform fill_cell using h 3 0 155155155 it_spfli-cityfrom.
elseif it_spfli-cityfrom cp 'N*'.
perform fill_cell using h 3 0 189111222 it_spfli-cityfrom.
else.
perform fill_cell using h 3 0 111230222 it_spfli-cityfrom.
endif.
if it_spfli-cityto cp 'S*'.
perform fill_cell using h 4 0 200200200 it_spfli-cityto.
elseif it_spfli-cityto cp 'N*'.
perform fill_cell using h 4 0 000111222 it_spfli-cityto.
else.
perform fill_cell using h 4 0 130230230 it_spfli-cityto.
endif.
if it_spfli-deptime lt '020000'.
perform fill_cell using h 5 0 145145145 it_spfli-deptime.
elseif it_spfli-deptime lt '120000' .
perform fill_cell using h 5 0 015215205 it_spfli-deptime.
elseif it_spfli-deptime lt '180000' .
perform fill_cell using h 5 0 000215205 it_spfli-deptime.
else.
perform fill_cell using h 5 0 115115105 it_spfli-deptime.
endif.
endloop.
EXCEL FILENAME
CONCATENATE SY-REPID '_' SY-DATUM6(2) '_' SY-DATUM4(2) '_'
SY-DATUM(4) '_' SY-UZEIT '.XLS' INTO FILENAME.
CALL METHOD OF H_MAP 'SAVEAS' EXPORTING #1 = FILENAME.
free object h_excel.
perform err_hdl.
FORM FILL_CELL *
sets cell at coordinates i,j to value val boldtype bold *
form fill_cell using i j bold col val.
call method of h_excel 'Cells' = h_zl
exporting
#1 = i
#2 = j.
perform err_hdl.
set property of h_zl 'Value' = val .
perform err_hdl.
get property of h_zl 'Font' = h_f.
perform err_hdl.
set property of h_f 'Bold' = bold .
perform err_hdl.
set property of h_f 'Color' = col.
perform err_hdl.
endform. "FILL_CELL
*& Form ERR_HDL
outputs OLE error if any *
--> p1 text
<-- p2 text
form err_hdl.
if sy-subrc <> 0.
write: / 'OLE-Automation Error:'(010), sy-subrc.
stop.
endif.
endform. " ERR_HDL
regards,
venkat -
How to get windows form object of a MMC snapin node using MMC automation object model
Hello,
I am using automation object model for an existing mmc file and just trying to traverse all nodes of it. And i am able to do so.
My query is : how can i get the access of windows form object of a particular node . Windows form is present in result pane of a node, i want to get access of that so that i can perform some automation on that form.
http://msdn.microsoft.com/en-us/library/aa815049(v=vs.85).aspx
I found that if OCX control is in result view of any node, then "view object -> control object property" returns
the automation interface supplied by the control in the result view.
However, if result view is HTML view then how to get the automation interface of that result
view.
Thanks in advance,
SumitHi Sumit,
I read the link you provide above. It seems that when you want to achieve your target by using MMC automation
object model, you need to use codes. Based on the programming language, if use VB, I suggest you post the question in
VB Forum. If you want to use C#, may post in
C# Forum.
In addition, there is an answered question, may help you to find the correct forum.
MMC development forum?
http://social.microsoft.com/Forums/en-US/3796a8e9-674e-4da0-a40e-4e4b69575c8e/mmc-development-forum?forum=whatforum
Since, it’s more related to development. We may can’t provide some more detailed information. Thanks for your
understanding.
Hope this helps.
Best regards,
Justin Gu
Maybe you are looking for
-
Goods receipt and GR non-val indicators in PO Delivery tab
I'm trying to disable the buyer from being able to uncheck the goods receipt indicator or to check the GR non-val indicators in the PO (except in the case of multiple account assignment. In OMF4 I changed GR/IR control and "Delivery completed" indic
-
i generally download songs from free sites like songs.pk, emp3world.com.........i am able to download songs from same sites in other browser like opera just by clicking on link to download, but in firefox a black screen appears and media is played on
-
Pdfs from American Chemical Society do not open in Safari
I frequently download article pdfs from scientific journals. Recently I discovered that clicking on the pdf link of an article from the American Chemical Society site (in Safari 2.04 (419.3)) opens a nonsense page, It neither downloads the article no
-
Submitting a Signed PDF form in Workflow
Hello, Is there anyone experienced submitting signed PDF form in workflow? We have tried to use a PDF form designed using AFD 5.0 along with AWS 6.2 to automate the approval process. But when the initiator signs the document, using the signature obje
-
Trouble converting movies into ipod compatible files
I just got quicktime pro and I'm trying to convert movie files into files that can be played on my ipod... the files are changing into M4V files and can be played on my ipod but they have no sound.. can anyone help me fix this?