SCVMM 2012 R2 HyperV host not pulling PA (Provider Address) when running NVGRE enabled VMs

Hello,
I have a SCVMM 2012 R2 NVGRE enabled environment that I setup according to Kristian Nese's "Hybrid Cloud with NVGRE" guide.
I have a "Compute" host group setup in SCVMM that is using a Failover Cluster of two WS2012R2 servers that have a iSCSI LUN for VM storage. The cluster itself working fine.
There is a "Gateway" host group that has one server in it being used for the NVGRE Gateway.
The problem I am having is that any VMs I deploy on a VM network that has network virtualization enabled on the PA Network cannot access the internet. The NVGRE Gateway can access the internet just fine. The VMs pull PA addresses and CA addresses correctly.
The NVGRE gateway host pulls a PA address fine. The only thing that I can tell that is not working correctly is that when I run "get-netvirtualizationprovideraddress" on a hyperv host that has VMs that are using a network with virtualzation enabled,
it doesn't return any output. Also, when I run "get-netvirtualizationlookuprecord" on the NVGRE host, it does not list the two hyperv "Compute" nodes at all. So, as far as I can tell, the two VM host servers are not pulling a Provider Address.
But, I have read that they are supposed to automatically pull a PA address as soon as a VM using network virtualization is deployed and running.
I've been working on this for the last week, and I'm at a complete loss. I have no idea where to go from here. Any help would be much appreciated.
Thanks!

Also, I have tried to redeploy other test VM networks, VMs, and the PA Network itself and it still doesn't work.
Any ideas?

Similar Messages

Why does aol not auto enter email addresses when I compose an email?

why does aol not auto enter email addresses when I compose an email?

what a ridiculous decision to change from "starts with" to "contains".
I have a further problem - having selected the address I want from the umpteen options pulled from my address book, I then press enter to add another line for another address.....and the first address I selected changes to a completely different address!
And also addresses from the address book which previously appeared only in black now randomly appear in red.
help please!

Why does my apple I'd not verify my email address when I try to sign in to iMessage?

Why does my apple ID not verify my email address when I try to sign into iMessage

It's a commun problem with IOS 6 and it depends in which country you are trying to activate the iMessage maybe it's blocked from the goverment ...

Can SCVMM 2012 R2 Operate Without Problems If Hyper-V Environment Is Running Windows Server 2012?

Good afternoon,
Are there any repercussions to using SCVMM 2012 R2 in a Hyper-V environment that is running Windows Server 2012? My Hyper-V hosts are running Windows Server 2012.
Thanks,

Hi,
running SCVMM 2012 R2 in a Windows Server 2012 Hyper-V environment is fully supported
best regards Marc Grote - www.it-training-grote.de

System Not Picking Permitted Payee address when the Main vendor has PO Box.

Hi,
When we are doing payments to Permitted Payee ( Vendor ) the system is printing the checks with PO Box ( Post Box no. ) number of the Main vendor .
But when we deleted the PO Box number field in Main vendor, then the system is printing the check with Permitted payee address.
When Main vendor number has PO Box field populated with a number, selected credit address ( Permitted Payee address ) will not print on check.
When there is a Permitted Payee the system has to consider that Permitted Payee address only. But system is not doing like that.
Please advice what is the problem.
( They are paying through APP run ).

Can you please tell me where it is.
Thanks for your prompt reply.

MacBook Pro late 2011 not switching to ATI graphics when running off mains power.

Hi there.
My MacBook Pro late 2011 doesn't appear to be switching to ATI graphics when running off mains power. It always seems to stay on the Intel adapter instead. I've checked the option in the energy saver settings and it's ticked to "Automatically switch..." and when I untick this box, it switches to ATI and stays that way even when running on battery (as expected). Either way it will not switch to ATI graphics when plugged into mains unless forced to in this way.
Any one else seen this? Very frustrating when trying to run an external monitor with the Intel adapter!
Thanks in advance.
Dan

"As a last resort I opened the bottom cover and disconnected the battery power plug (MagSafe adapter also disconnected)."
After everything was disconnected did you press the power button and walk away for 5 minutes? Try that, just had one restart after waiting for that long.

Hand Held application not recognising a database instance when running in cradled mode through Windows Mobile Device Centre.

How do I get a Hand Held application to recognise a database instance when running cradled through Mobile Device Centre?
I have a database instance on a networked machine as NZTESTSERVER2\NZ2008.
If I run the Hand Held application in WI-Fi connected mode it resolved this database connection name without any problems.
This database connection name also works from a Desktop application running on the PC that I have cradled the Hand Held to.
But the instance isn’t being resolved when I run the Hand Held application in cradled mode, without a Wi-Fi connection. In this case it still recognises the server address part ‘NZTESTSERVER2’ but it doesn’t recognise this with the database instance included
(\NZ2008).
I even tried using it with the servers IP and the instance (192.168.0.14\NZ2008), but again it recognises the server IP address (192.168.0.14), but not with the instance (\NZ2008).
So why does the app run in WI-Fi but not cradled mode?

It would better to understand your problem if you can share some code here,

NOT displaying the command window when running applications

hi
i'v been seraching all over the web for a way to get rid of the command window (dos shell) that appears when running a java swing based application (or any other). i currently have a batch file that loads all the required libraries into the class path and then calls the application's main class. problem is, the DOS command window stays open. is there any way to have it not display (obviously without losing my program in the process). at the very least can it be minimised automatically (just the dos window)?? though i think getting rid of it all together would be best.
i would really love some help on this... very over seeing that dos window displayed...
any help would be greatly appreciated.... thanks heaps
Takis

On Win NT
REM get rid of commnand window
start /B java swingapp
REM minimize the command window
start /MIN java swingapp
REM for other options
help start
Hope this helps,
Sathish.
hi
i'v been seraching all over the web for a way to get rid of the command window (dos shell) that appears when running a java swing based application (or any other). i currently have a batch file that loads all the required libraries into the class path and then calls the application's main class. problem is, the DOS command window stays open. is there any way to have it not display (obviously without losing my program in the process). at the very least can it be minimised automatically (just the dos window)?? though i think getting rid of it all together would be best.
i would really love some help on this... very over seeing that dos window displayed...
any help would be greatly appreciated.... thanks heaps
Takis

Can i rejoin ny SCVMM 2012 server to domain with same name & IP address?

Dear all..
I am in situation where i have to rejoin my scvmm server to domain with same name & ip address.one of the fool admin has deleted my SCVMM's computer object from AD. I have recreated the object & tried to log on but no luck.. i have to rejoin
the server.
Does it have any risks involved or its just fine?

Hi,
First the behavior is normal. If an computer accounts is deleted, you cannot continue using the server without rejoining.
SCVMM it's not depending (integration) on active directory in such way as Exchange.
So, if the computer accounts has been deleted, there is no issue in creating a new one and rejoin the server. As long as the application on the server is able to look up any required directory services, it should be happy again.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

Hi my web hosting company irunsolutions.co.uk have informed me that my website does not display properly in firefox when run on a windows 7 32 bit platform.

website is www.empireembroidery.co.uk
does not display properly when viewed on 32bit windows 7 platform in firefox.

You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Why does the new itunes not pull up my iphone when connected to the computer?

I just downloaded the new Itunes 11 on my computer and when i plug my phone in it does not bring it up in itunes. it was trying to bring it up in real player so i uninstalled that and it still wont show in itunes. i have restarted my computer and phone multiple times as well ad uninstalling and reinstalling itunes and nothing is working.

Thanks for your input but as i have said it is a Motorola V3i (The i means itunes compatable). I have uninstalled and re-installed every old version of itunes there is and it works perfect from itunes 5 up to itunes 9 then it goes wrong and does not recognise my device allowing me to sync. I am happy with itunes 9 but it will not allow me to keep it without updating it to itunes 11. The phone is recognised by the comp and appears in devices. Any further ideas will be welcome. Thanks

Can not use stored windows credential when running merge agent with agent proxy

I have an account ACCT_A and create a windows credential
CRED_B target to server DISTRIBUTOR_1 (with cmdkey).
And I setup a pull subscription to DISTRIBUTOR_1 and set merge agent run under agent proxy with credential of account
ACCT_A (The sql server agent is running as LocalSystem or Network Service). Then the merge agent job will failed and complain "Failed to connect to distributor
DISTRIBUTOR_1".
However if I change the sql server agent to run as ACCT_A and let merge agent job run as SQL Server Agent Service Account it will successfully connect to distributor
DISTRIBUTOR_1 with credential CRED_B, with other setting unchanged.
Here are the questions:
Is it possible to grant other accounts to access one's stored windows credential in Credential Manager?
I suppose merge agent job will get full security context of ACCT_A when it runs under agent proxy with credential of ACCT_A and should be able to access stored credential CRED_B and
successfully connect to DISTRIBUTOR_1. But nowCRED_B seems can not be accessed by merge agent. Could somebody explain what's the problem here?

Hello,
I am currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Browser does not go to location address whenI press ENTER. I have to click on an arrow on the far right of the location bar. How can I get back to just hitting ENTER?

Usually I just type in the address and hit enter. But lately it changed so that I have to move the mouse to an arrow on the right side of the address bar and then click.
I prefer the original method. How do i avoid having to click on the arrow?

Pressing enter not working can be caused by a malfunctioning add-on. For some people this has been caused by the AVG safe search add-on, disabling that add-on has cured the problem.
The procedure in the following link can help in identifying if an add-on is causing the problem - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

"Could not find the main class" when running a jar

Hi, I'm trying to create and run a jar from my application, but I can't figure out how to properly set an entry-point. Looking at the Java Tutorials http://java.sun.com/docs/books/tutorial/deployment/jar/index.html I still can't get it to work.
I have a directory myApp, which contains a directory images and some class files, including mainClass.class. I also have a manifest Manifest.txt in the directory myApp with the following line:
Main-Class: mainClass.class
+ one empty line
I create a jar successfully, while inside the myApp directory, with the following command:
jar cfm myApp.jar Manifest.txt *.class images\*.*
I then proceed to run the jar with the following command:
java -jar myApp.jar
and receive the following error:
Exception in thread "main" java.lang.NoClassDefFoundError: myApp/class
My completely uneducated guess is that there is something wrong with my manifest. The tutorial says that the line should be:
Main-Class: MyPackage.MyClass
I'm assuming that I get the error because I didn't specify a package, which I didn't do because I didn't know what to put there. Do I even have a package?
Can anyone tell me what I've done wrong? thanks.
Message was edited by:
SmurfZG

One problem is you are specifying a file name instead of a class name. It probably should beMain-Class: mainClassA good test is to run your app before jaring it - if you run it with "java mainClass" then the Main-Class attribute must be mainClass.
Also class naming conventions say that class names should start with a capital letter - MainClass for example. It is just a convention, but it is easier to get help when you follow conventions.

Not able to see iMac when running Vista in Bootcamp

I have been googling away to try and resolve this issue and have found nothing that helps. Hope someone can help here. I have a 20" 2.4Ghz iMac Core 2 Duo running Leopard and just installed Vista Home premium under Bootcamp. My problem is that I am unable to see my Powerbook G4 that is also on my home network running Leopard. The same goes for my powerbook, When on my powerbook I can't see my iMac when it is running Vista. However, when both the iMac and Powerbook are in Leopard, they detect each other immediately and I have no problems transferring files. Can someone tell me how to get these two computers to see each other and allow file transfers, while running Vista. Thanks in advance

test

SCVMM 2012 R2 HyperV host not pulling PA (Provider Address) when running NVGRE enabled VMs

Similar Messages

Maybe you are looking for