SCVMM 2012 R2 - prerequisite - Link to ADKsetup 8.1 broken?

Trying to get SCVMM 2012 R2 installed at a customer of mine. It seems the link to adksetup.exe is broken:
http://www.microsoft.com/en-us/download/details.aspx?id=39982
leads to: http://www.microsoft.com/library/errorpages/smarterror.aspx?aspxerrorpath=/en-us/download/details.aspx
and "We are sorry, the page you requested cannot be found"
Any other download locations for this?

Hi,
http://www.microsoft.com/en-us/download/details.aspx?id=39982
worked for me (tried it a few minutes ago)
best regards Marc Grote - www.it-training-grote.de

Similar Messages

Step-By-Step guides/links to implement SCVMM 2012 R2?

Are there any Step-By-Step guides/links to implement SCVMM 2012 R2?

That is pretty broad - not sure what you are looking for. Begin here:
http://technet.microsoft.com/en-us/library/gg610610.aspx
Applies To: System Center 2012 - Virtual Machine Manager, System Center 2012 R2 Virtual Machine Manager, System Center 2012 SP1 - Virtual Machine Manager
http://technet.microsoft.com/en-us/library/gg671824.aspx
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Unable to reinstall SCVMM 2012 R2 during database migration - access denied to VMMDKM container

I'm trying to migrate my SCVMM 2012 R2 DB to a new SQL 2012 server. As per TechNet article http://technet.microsoft.com/en-us/library/dn469626.aspx,
I uninstalled VMM, which went without a problem. During the reinstall, setup fails with "Unable to create or access the Active Directory container CN=VMMDKM,CN=System,DC=feroscare,DC=local. Access is denied. Specify the distinguished name
for the container and verify that you have GenericRead|CreateChild|WriteProperty rights on the container." - as is shown in the setup log below.
I'm trying to use the same account as the service account and to connect to the database. I'm logged into the VMM server as that user account (and running setup as that account). I have verified that the account has full control over the VMMDKM container
and all descendant objects. I've also added these permissions for the VMM server's computer account, although I'm not sure that's necessary.
VMM server is running Win 2012 R2, SQL server is 2012 running on Win 2012 R2. Domain controller is running 2008 R2 with AD at the 2003 functional level.
Please can anyone please advise what to do next to troubleshoot this?
What seem to be the relevant lines from the VMM setup log:
"12:33:04:Error:SetupDKM method threw. See inner exceptions, Exception Type: System.DirectoryServices.DirectoryServicesCOMException, Exception Message: A constraint violation occurred.
12:33:04:StackTrace: at System.DirectoryServices.DirectoryEntry.CommitChanges()
at Microsoft.Incubation.Crypto.GroupKeys.ADRepository.AddAccessRule(IdentityReference identityReference, ActiveDirectoryRights rights)
at Microsoft.VirtualManager.Setup.DKMHelper.SetupDKM(String containerName, String topContainerName)
12:33:04:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to create or access the Active Directory container CN=VMMDKM,CN=System,DC=feroscare,DC=local.
Access is denied.
Specify the distinguished name for the container and verify that you have GenericRead|CreateChild|WriteProperty rights on the container.
12:33:04:StackTrace: at Microsoft.VirtualManager.Setup.DKMHelper.SetupDKM(String containerName, String topContainerName)
at Microsoft.VirtualManager.Setup.DKMHelper.SetDKM(Boolean isDKMEnabled)
at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
12:33:04:InnerException.Type: System.DirectoryServices.DirectoryServicesCOMException, InnerException.Message: A constraint violation occurred.
12:33:04:InnerException.StackTrace: at System.DirectoryServices.DirectoryEntry.CommitChanges()
at Microsoft.Incubation.Crypto.GroupKeys.ADRepository.AddAccessRule(IdentityReference identityReference, ActiveDirectoryRights rights)
at Microsoft.VirtualManager.Setup.DKMHelper.SetupDKM(String containerName, String topContainerName)
12:33:04:ProcessInstalls: Running the PostProcessDelegate returned false.
12:33:04:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
12:33:04:SetProgressScreen: FinishMinorStep.
12:33:04:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs"
Thanks in advance!

Hi new_guise,
Please refer to following link regarding "Reinstalling VMM with a Retained Database" :
http://technet.microsoft.com/en-us/library/cc764334.aspx
Also please refer to following article regarding that error message ：
http://support.microsoft.com/kb/2721457
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Can't able to add update server to fabric in SCVMM 2012 R2

Hi,
I have one windows server 2012 R2 standard machine (update server) with WSUS, I have installed from server manager as server role. This update server machine is having the public IP without domain and it is a VM on one of my Hyper-V server. I would like
to add the update server to my SCVMM 2012 R2 environment. When I try to add the update server to the fabric, it can't seems to be add because its throwing the error like, "Error (410) Agent installation failed on update server. The RPC
server is unavailable."
Has anybody else have clue ?
Can anybody offer some help ?

Hi,
following link provides info on how to add untrusted Hyper-V hosts to VMM
http://technet.microsoft.com/en-us/library/gg610609.aspx
as it might help you adding an untrusted WSUS also (haven't tested it myself)
MCITP SA - MCP Active Directory - MCP Infrastructure - MCP Server Virtualization www.it101.eu

Deleting VM with snapshot/checkpoint is extremely slow in SCVMM 2012 R2

It appears deleting VM with checkpoint from SCVMM 2012 R2 is extremely slow.
There is the configuration:
one SCVMM 2012 R2 running on Windows Server 2012 R2
one Windows Server 2012 R2 as file share server (SMB), stores all VM files. The share is managed by SCVMM . uses local SSD disk. two gigabit ethernet ports connected to a switch.
two hyper-v hosts running Windows Server 2012 R2, non-clustered, managed by SCVMM, each hosts has three gigabit Ethernet ports connected to the switch.
Everthing works including live migration. Here is the problem:
When I deleted a VM with checkpoint, it appeared that SCVMM/Hyper-V merges something, it took a lot of time on reading each AVHDX and write to VHDX, this results two problems:
1. It took a lot of time and bandwidth. I am about to delete the VM (and all its files). Why SCVMM/Hyper-V wants to merge all files? The deletion took 29 minutes for a 36GB VM. This VM is just plain standalone VM, no usage of template.
The expected result is to just delete all VM files and remove VM, don't do merge. (BTW: VMWare doesn't do merge, the deletion is done in a few seconds))
2. although all data file are on the file share, the hyper-v host still reads each file from file share, then write to another file on the same file share. It consumes significant network bandwidth. Can they offload the work to file server?
The expected result is that Hyper-V offload the transfer to file share server. It should not create huge amount of network io.
3. The merging operation is incredibility slow. around 24MByte/sec data being copied.
The hyper-v has 2xgigabit links, benchmark shows the file share access can easily go 200Mbytes/sec, and the file server side is SSD drive with 200+MByte/sec bandwidth. The expected result is if hyper-v ever merge, the speed is least 100MByte/s and hopefully
go up to 200MByte/sec. 21MB/s is just painfully slow.
Did I miss anything?

Thanks for the info. Even there may be use cases where merge is necessary, there are plenty of use cases where merging is overkill -- can Hyper-V have a CLI option that deletes VM without doing merging?
If such option won't be available soon, can SCVMM do this on deleting a VM:
1. revert to the latest checkpoint, delete the checkpoint
2. repeat the step 1 until all checkpoint removed.
3. delete the VM.
This workaround avoids the Hyper-V's merging. It is not as clean as VMWare's (they just delete the VM files, no extra merge), but at least it is much faster and less resource consumption than merging.

Upgrade the SCVMM 2008 R2 to SCVMM 2012 R2

Hello ,
i want to upgrade my SCVMM 2008 R2 to SCVMM 2012 R2 .
My Actual SCVMM 2008 R2 manage 3 nodes Hyper-V 2.0
What's the best way to upgrade My SCVMM?
Thanks.
prince

Hello,
Kindly follow below mentioned link for UpgradeSCVMM 2008 R2 to 2012<//span>
Article:
http://msdn.microsoft.com/en-us/library/hh757363.aspx
http://technet.microsoft.com/en-us/library/hh430986.aspx
Article with Snapshot:
http://www.kevin-burke.co.uk/windows-server-technologies/updating-system-center-vmm-2007-system-center-vmm-2012/
Video:
vimeo.com/28793495
I am suggesting you to fresh install OS and SCVMM 2012 R2 in different server. Once you install and configured SCVMM 2012 R2 then disconnect One by one Hyper-V servers from SCVMM2008
and add in SCVMM2012 R2.
For testing purpose disconnect non critical Hyper-V server and added to SCVMM 2012 R2.
Deepak Kotian.
MCP, MCTS, MCITP Server / Exchange 2010 Ent. Administrator
Disclaimer:
Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognizes useful contributions. Thanks!
All the opinions expressed here is mine. This posting is provided "AS IS" with no
warranties or guarantees and confers no rights.

SCOM 2012 SP1 - SCVMM 2012 SP1 Integration

Hi All,
I need to integrate SCOM 2012 SP1 (without UR)with SCVMM 2012 SP1(without UR).
Is Update Rollup required for this integration as a prerequisites? or We can directly proceed with Integration without update Rollup. Please advice.
Can we get performance date of virtual machine by integration scom with scvmm?
Thanks and Regards
Karthick M

Hi,
To monitor virtual machines in VMM, we should integrate VMM with SCOM, please go through the article below:
How to Connect VMM with Operations Manager
https://technet.microsoft.com/en-us/library/hh882396.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Error 10218 while integrating scom 2012 r2 with scvmm 2012 r2

hello,
We are working to integrate the SCOM 2012 R2 With SCVMM 2012 R2 .But while creating connection of integration it got failed with error in job on scvmm as below :
Error (10218)
Setup could not import the System Center Virtual Machine Manager Management Pack into Operations Manager server because one or more required management packs are missing. The VMM Management Packs cannot be deployed unless the following component management
packs are present in Operations Manager :
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
Recommended Action
To provide the missing component management packs, ensure that the following management packs have been imported into Operations Manager server:
Microsoft Windows Server 2003 Internet Information Services Management Pack for OpsMgr 2012 (version 6.0.6278.0 or later)
Microsoft SQL Server 2005 Management Pack(version 6.0.5000.0 or later)
You can download the management packs from the System Center Operations Manager Catalog at http://go.microsoft.com/fwlink/?LinkId=86411
Reference link used :- http://technet.microsoft.com/en-us/library/hh882396.aspx ,We have imported all the required MPs as mention in above link on scom.
Regards
Richa KM

Have you imported all of the packs it mentions:
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
There's a good walkthrough
here which details all the pre-reqs.
It was some time ago but i also did a walk-through with pictures
http://myopsmgrblog.wordpress.com/2013/04/23/scom-integration-with-scvmm/
Hope this helps

Highly Available Management Servers in SCVMM 2012

Dear All,
I need to build Highly Available Management Servers (2) (SCVMM 2012) for my environment. I am interested in following things:
1. What are my options. I have done little reading and seek confirmation that without building a windows failover cluster, one is not able to build HA SCVMM Management Servers? Am I correct in understanding this? If so, do I need
a shared disk as well to create a cluster first and then install Management Servers?
2. What service accounts or groups are need during the configuration and what would be their permissions on respective servers such as Hyper-V Hosts and in Active Directory?
3. Do we really need to create a container in Active Directory for an HA SCVMM scenario?
4. Can HA solution be implemented without the WFC?
5. Would appreciate, if you could share some of the links to blogs/articles about step by step instructions to it.
Thanks in advance.

easy. create 2 node cluster-nested virtual or physical, no matter. if virtual, set affinity (rather lack of to keep them on separate nodes-also build a sql cluster as well and also keep them on separate nodes)follow the articles.
I found no less than 10 step by steps when searching for when I built the HA SCVMM / SQL environment for my company.
MS article and third party, as you can see they are pretty straight forward to follow. Best of luck.
http://technet.microsoft.com/en-us/library/gg610678.aspx
http://www.thomasmaurer.ch/2013/08/how-to-install-a-highly-available-scvmm-management-server/
Brian

OS-Deployment to virtual servers with SCVMM 2012 R2 vs SCCM 2012 R2 or integration with both?

Hi,
OS-Deployment to virtual servers with SCVMM 2012 R2 vs SCCM 2012 R2 or integration with both?
Is SCCM just for physical servers, and SCVMM for virtual?
What are benefits of integrating them?
/SaiTech

Hi,
Please refer to the links below:
Introduction to Configuration Manager
http://technet.microsoft.com/en-us/library/gg682140.aspx
Virtual Machine Manager
http://technet.microsoft.com/en-us/library/gg610610.aspx
The System Center 2012 Integration Guide provides information about automating each of the System Center components and integrating them with each other and with other systems and applications.
For more information, see the
System Center 2012 Integration Guide.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Help understanding SCVMM 2012 networking

My background is in Hyper-V Manager and I have been using it to create virtual switches (External, Internal, Private) and then connect VMs to them. This is simple for me and easy to wrap my head around.
Now, I am playing with SCVMM 2012 and I am confused about the networking presented here.
I don't understand the difference between creating logical networks, creating VM networks, logical switches, virtual switches, being asked about uplinks, ports and IP-pools.
When I added my Hyper-V hosts to the SCVMM, it recognized an external switch I created and placed it under Fabrics - Logical Networks. I just want to be able to mimic the functionality of having a virtual switch so do I create a logical network or
a logical switch or what?
I am just confused with this new terminology and technology and if anyone could help me out that'd be great.

SCVMM has its way of doing things. And there are certain things that SCVMM manages that will not work if you don't handle things its way.
If you want SCVMM to drive Network Virtualization in any way - then you need to drink the SCVMM coolaid and begin learning about SCVMM being in charge of creating the virtual switches.
In this model a logical switch, has uplink port profiles (physical nics) and virtual port profiles (vm nics). This defines a virtual switch that SCVMM creates.
The VM network (the consumption point) links to a Logical Network, which can have IP pools (If SCVMM is assigning IP addresses) and links to a logical switch.
I admit - if you are used to SCVMM prior to 2012, it takes a bit to wrap your brain around. It is very different.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

SCVMM 2012 agent install fails on standalone 2008 R2 host

I am attempting to install SCVMM 2012 agent and getting this error:
Error (421)
Agent installation failed on exhpv01.denverwater.org because of a WS-Management configuration error.
Recommended Action
Ensure that the Windows Remote Management service is enabled and running on the server exhpv01.denverwater.org. Additionally, in the Local Group Policy Editor (gpedit.msc), navigate to Computer Configuration\Administrative Templates\Windows Components\Windows
Remote Management (WinRM), and then ensure that there are no policy settings configured for WinRM Client or WinRM Service.
I have run winrm qc and it shows winrm is configured. I have verified there is no gpo settings configuring winrm.
My runas account is a local administrator on the target host.
I can install the agent local but still cannot add to the SCVMM server.
Mark

I am attempting to install SCVMM 2012 agent and getting this error:
Error (421)
Agent installation failed on exhpv01.denverwater.org because of a WS-Management configuration error.
Recommended Action
Ensure that the Windows Remote Management service is enabled and running on the server exhpv01.denverwater.org. Additionally, in the Local Group Policy Editor (gpedit.msc), navigate to Computer Configuration\Administrative Templates\Windows Components\Windows
Remote Management (WinRM), and then ensure that there are no policy settings configured for WinRM Client or WinRM Service.
I have run winrm qc and it shows winrm is configured. I have verified there is no gpo settings configuring winrm.
My runas account is a local administrator on the target host.
I can install the agent local but still cannot add to the SCVMM server.
Mark

SCVMM 2012 SP1 (RTM) Deployment from VMM Console fails.

Error During a library refresh, or deployment from template - It all fails:
Error (12710)
VMM does not have appropriate permissions to access the Windows Remote Management resources on the server (MyServer).
Unknown error (0x80338105)
Recommended Action
1) Ensure that the Windows Remote Management (WS-Management) service is running on the server (myserver).
2) If the System Center Virtual Machine Manager service on your VMM management server is configured to run by using the machine account, ensure that there is not a group policy that does not allow adding machine accounts to a computer's Administrators group.
If there is, you can use one of the following workarounds:
- Disable the group policy in Active Directory Domain Services (AD DS)
- Modify the group policy to allow the VMM machine account in the Administrators group
- Move the machine account to its own organizational unit (OU) and block the group policy from being applied
- Reinstall the VMM management server and choose the option to run the System Center Virtual Machine Manager service by using a domain account, and re-add all of your virtual machines.
So, as soon as SCVMM 2012 Sp1 was released we decided that it was best to upgrade so we could utilise the new features of Server 2012 as a host.
The upgrade worked a treat. VM's deployed, Server 2012 worked. Anyway, a few days after deployment we start to see errors relating to WinRM and permissions (See end of the post). After a quick trace around we found some failed services, usually on a host
but sometimes it seemed to happen on the Library/Management server as well.
So, our setup is as follows:
Management/Library server = VMware VM, Server 2012 standard, 6 GB memory, 4 vCPU's
Hosts = HP DL360p G7, HP DL360 Gen8 (we have a few of these), Server 2012. We also have a DL380 G7 on Server 2008 R2 Enterprise that fails as well, so it seems the error isn't O/S specific (I'm picking a VMM issue).
So I have tried many resolutions and now none of them work.
We have no restrictions on group policy for the local admin, this can be set manually, and works for that matter.
WinRM is working and the listening port is 5985 (I can see it working and listening via a "netstat -an")
Also, I have ensured many many times that all of the required services are up and running (SCVMMAgent, VirtualDisk managerment, WinRM) and initially these where at fault and a simple restart of each service (or even a full start from dead) fixed
it - Now it all fails. Even a library refresh fails. And all while each of the services required are up and running.

So, I have now tried a reinstall of the management server & made some changes
1- Changed the service account during the install.
2 - Added the service account user to the local admins group of each host in question.
3 - Tried "winrm /qc" .which lets me know its already up and running and configured. Although I must admit, I'm not 100% sure how to use WinRM. From what I can read, this is like an express setup and ensures you are up, running and listening.
4 - Verified that WinRM is working of the right port (Listening ports dump below)
5 - Verified that I can connect to each port required for the SCVMM Management server.
BUT, it seems the error is still there and deployments still fail,
although the library refreshes correctly now.
Error (12710)
VMM does not have appropriate permissions to access the Windows Remote Management resources on the server ( Myserver).
Unknown error (0x80338105)
NETSTAT Listening ports dump.
PS C:\Users\nzadmin> netstat -an
Active Connections
Proto Local Address          Foreign Address        State
TCP    0.0.0.0:135            0.0.0.0:0              LISTENING
TCP    0.0.0.0:443            0.0.0.0:0              LISTENING
TCP    0.0.0.0:445            0.0.0.0:0              LISTENING
TCP    0.0.0.0:1801           0.0.0.0:0              LISTENING
TCP    0.0.0.0:2103           0.0.0.0:0              LISTENING
TCP    0.0.0.0:2105           0.0.0.0:0              LISTENING
TCP    0.0.0.0:2107           0.0.0.0:0              LISTENING
TCP    0.0.0.0:3389           0.0.0.0:0              LISTENING
TCP    0.0.0.0:5985           0.0.0.0:0              LISTENING
TCP    0.0.0.0:8000           0.0.0.0:0              LISTENING
TCP    0.0.0.0:8100           0.0.0.0:0              LISTENING
TCP    0.0.0.0:8101           0.0.0.0:0              LISTENING
TCP    0.0.0.0:8102           0.0.0.0:0              LISTENING
TCP    0.0.0.0:8103           0.0.0.0:0              LISTENING
TCP    0.0.0.0:47001          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49152          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49153          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49154          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49155          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49156          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49170          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49201          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49211          0.0.0.0:0              LISTENING
TCP    127.0.0.1:57388        0.0.0.0:0              LISTENING
TCP    172.23.16.69:139       0.0.0.0:0              LISTENING

Upgrade of scvmm 2012 sp1 to scvmm 2012 r2 fails with "Access to the path 'C:\ProgramData\VMMLogs\SetupWizard.log' is denied"

I had a working scvmm 2012 sp1 installation, and am attempting to upgrade to 2012 r2.
The old SCVMM product was removed (retaining the database), as well as ADK 8.0. I then installed ADK 8.1.
The install fails after a number of minutes with "Access to the path 'C:\ProgramData\VMMLogs\SetupWizard.log' is denied". From my reading of the log, that was the only obvious failure, and that the VMM server MSI installed successfully.
It doesn't appear to get so far as to upgrade the database.
The OS is Windows Server 2012 R2 Standard, with all updates applied. I have tried the install many times, noticed that the McAfee virus scanner was pushed to the box at some point, so I removed it, but still no dice.
12:18:58:LaunchMSI: MSI C:\Users\mscott\Desktop\mu_system_center_2012_r2_virtual_machine_manager_x86_and_x64_dvd_2913737\amd64\setup\msi\Server\vmmServer.msi succeeded.
12:18:58:Doing Postinstall task for PangaeaServer
12:18:58:ProcessInstalls: Install Item VMM management server was successful. We will launch the post process delegate.
12:19:47:Windows feature RSAT-Clustering-PowerShell already enabled, skipping
12:20:15:Windows feature WindowsStorageManagementService already enabled, skipping
12:20:41:Windows feature UpdateServices-API already enabled, skipping
12:23:31:VMMPostinstallProcessor threw an exception: Threw Exception.Type: System.UnauthorizedAccessException, Exception.Message: Access to the path 'C:\ProgramData\VMMLogs\SetupWizard.log' is denied.
12:23:31:StackTrace:   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
Boolean checkHost)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)
   at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize, Boolean checkHost)
   at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize)
   at System.IO.StreamWriter..ctor(String path, Boolean append)
   at System.IO.File.AppendText(String path)
   at Microsoft.VirtualManager.SetupFramework.CommonLogger.Log(String trace)
   at Microsoft.VirtualManager.SetupFramework.CommonLogger.Log(LogLevel level, String trace)
   at Microsoft.VirtualManager.SetupFramework.Trc.Log(LogLevel level, String trace, Object parameter1, Object parameter2, Object parameter3)
   at Microsoft.VirtualManager.SetupFramework.Trc.LogException(LogLevel logLevel, String customMessage, Exception exception)
   at Microsoft.VirtualManager.Setup.DBConfigurator.ExecuteScript(SqlContext ctx, String fileName)
   at Microsoft.VirtualManager.Setup.DBConfigurator.UpgradeDatabaseTables()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.CreateDB()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
12:23:31:ProcessInstalls: Running the PostProcessDelegate returned false.
12:23:31:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
12:23:31:SetProgressScreen: FinishMinorStep.
12:23:31:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
12:23:31:****************************************************************
12:23:31:****Starting*RollBack*******************************************
12:23:31:****************************************************************
12:23:31:SetProgressScreen: StartMinorStep.
Mark E. Scott Jr.

Perhaps relevant, perhaps not. This error shows up right after the above log snippet. I assumed it was an error with the rollback routine, but just in case, here it is:
12:23:31:SetProgressScreen: StartMinorStep.
12:23:31:ProcessInstalls: Install Item VMM management server has a Preprocessing delegate of PangaeaServerPreinstallProcessor. Launching it now.
12:23:31:GetSqlLoginName: TThe login name for the vmm server service is [DGSLAB\tfs-vmm]
12:24:49:no HAVMM name detected in DB. Doing VMM Uninstall
12:24:53:Start setspn.exe parameters -D SCVMM/tfsvmm1.dgslab.com DGSLAB\tfs-vmm
12:24:56:Start setspn.exe parameters -D SCVMM/tfsvmm1 DGSLAB\tfs-vmm
12:25:00:DBConfigurationHander.SetupAsVMMServerRole() CarmineException : Threw Exception.Type: Microsoft.VirtualManager.Utils.FailedToAcquireLockException, Exception.Message: Unable to perform the job because one or more of the selected objects are locked by
another job.
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
12:25:00:StackTrace:   at Microsoft.VirtualManager.Utils.CarmineObjectLock.ExecuteAcquireLockSP(CarmineObjectLockType lockType)
   at Microsoft.VirtualManager.Utils.CarmineObjectLock.AcquireLockWithRetries(CarmineObjectLockType lockType)
   at Microsoft.VirtualManager.Utils.CarmineObjectLock.AcquireLock(CarmineObjectLockType lockType, Boolean doNotWaitForLock)
   at Microsoft.VirtualManager.DB.Adhc.AgentServer..ctor(RemoteServer server, Guid serverID, Version agentVersion, VersionState agentVersionState, AgentPackageType agentPackageType, Boolean wsManOverSSL, Int32 wsManPort, Nullable`1 complianceStatusID,
Nullable`1 mostRecentTaskID, Nullable`1 mostRecentTaskUIState, Guid taskID, CarmineObjectLockType lockType)
   at Microsoft.VirtualManager.DB.Adhc.AgentServer..ctor(SqlRow row, Guid serverID, Guid taskID, CarmineObjectLockType lockType)
   at Microsoft.VirtualManager.DB.Adhc.AgentServer.<>c__DisplayClass4.<GetInstance>b__3(SqlRow row)
   at Microsoft.VirtualManager.Engine.DbAccessHelper.GetFromCommand[_RetTy,_ColumnsTy](ReadOption readOption, SqlRetryCommand cmd, GetFromCommandWorker`1 worker)
   at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleReadErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo notFoundErrorInfo)
   at Microsoft.VirtualManager.DB.Adhc.AgentServer.GetOne(String computerName, GetFromCommandWorker`1 ctor, ConnectionProperties properties)
   at Microsoft.VirtualManager.Setup.DBConfigurator.SetupAsVMMServerRole(Boolean isAssociate)
12:25:00:InnerException.Type: Microsoft.VirtualManager.DB.DBCorruptionException, InnerException.Message: Unable to connect to the VMM database because the database is in an inconsistent state.
Contact an experienced SQL administrator whenever this error occurs. In some cases, it may be necessary to restore the VMM database. If the problem persists, contact Microsoft Help and Support.
12:25:00:InnerException.StackTrace:   at Microsoft.VirtualManager.DB.SqlRetryCommand.ValidateReturnValue()
   at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
   at Microsoft.VirtualManager.Utils.CarmineObjectLock.ExecuteAcquireLockSP(CarmineObjectLockType lockType)
Mark E. Scott Jr.

After host crash - cluster no longer working correctly in SCVMM 2012

Hi
one of our nodes in our cluster crashed. It came back. All the VMs on this host were running on other hosts so failover worked fine BUT for 2 VMs. One of those 2 VMs is - according to VMM - running on the crashed host. The other VM is - according to VMM
- running on another host node which did not fail.
I have a lot of job errors saying that VMM library object virtuals disk is missing of those two VMs. So I looked into the FailoverManager. There I was able to see that the VMs are running on totaly different host nodes then what VMM tells me. In addition
those VMs work just fine. I connected to both of them over Hpyer-V and they are just fine and the application also work without a problem. Please not those VMs are not shown twice or missing in VMM.
Live Migration to the Host node that crashed is no longer possible. But when looking into the status on VMM - it tells me that everything is fine. From Hpyer-V Manager I am able to do live migration to this host. But no longer from VMM console.
I rebooted the host node with no change. I refreshed the host nodes (all) in FailoverManager and in SCVMM, I refreshed the cluster... nothing. So I wanted to remove the cluster from SCVMM and re-add it. Doesn't work... It started with the first host and
after that my cluster was somewhat broken (I thought that removing cluster - NOT "uncluster" - wouldn't have an effect on the cluster itself - well I was wrong). Anyway I repaired the cluster it is back into VMM but I still have the issues with the VMs. There
are only warning on the VMM server that the library object (vhd) is missing but on the cluster nodes itself there are no errors.
Any ideas what I could do. I have no clue what to do about the VM which is supposed to be on this host but in FailoverManager it is on a totally different server. Any ideas?

Hi,
version is SCVMM 2012 RC - yes there were errors with live migration but unfortunately I receive so many warning messages now (about missing library objects for vhd files) that the errors from tuesday are already gone. I guess they might be in database ...
The log files you asked for are from 2011 when the cluster was created - no entries after that.
No the cluster is not in Maintenance or Pause mode - i checked that. Remove and re-join the cluster with VMM 2012 RC was already tried. As described above: that failed - the first cluster node was removed and after that the job failed in VMM. I found the
error message quite ironic because it said that "cluster node 1" is no longer reachable. Nooo really... it just had been removed a second before the "remove cluster" job failed. Unfortunately this job played havoc with my cluster. It took me 4 hours to bring
it back online (mostly VMs).
The good thing is, my cluster is somewhat working again - meaning after I repaired it and was able to re-add the missing cluster node back into VMM live migration now works both from Hyper-V and from SCVMM. The VERY bad part is that now several more VMs
are - according to VMM - runing on "cluster node 1" while the Failover Manager says they are runing on "cluster node 2 or 3...". In addition I get many more warning messages. This error is the one I am trying to eleminate. As said I haven't found anything
which helped me narrow done a solution. Everything I tried so far didn't have any response or - like the cluster - it made things quite bad (temporary). I checked the Event logs on the cluster nodes and VMM itself. Currently there are no error messages there.
Warning messages in VMM:
Warning (23234) VM Refresher encountered an error while creating or updating <vm name> with id XXXXX. VMM cannot find VirutalHardDisk object XXX. Ensure the library object is valid, and then try the operation again.
Warning (10647) The virtual network adapter for the virtual machine <vm name> is connected to a virtual network switch <swtich name> that is not valid.
Does anyone know how to change the time interval of the "VM Refresher"? I get those warning messages for each VM every 2 min. As there are several VMs affected by now I have several thousend messages each day...

SCVMM 2012 R2 - prerequisite - Link to ADKsetup 8.1 broken?

Similar Messages

Maybe you are looking for