SCVMM Kicks out Nexus 1000V Uplink NIC Any ideas?
The SCVMM suddenly kicks out the Nexus 1000V Uplink NIC,
thus preventing me from remediating the change.
Also i get this error message
Using Hyper V as virtualization platform
Hello,
You can use one Ethernet port-profile with a channel-group command (like 'channel-group auto mode on mac-pinning') and assign it to all the vmnic interfaces that need to carry the same set of VLANs
The same port-profile can be used on other hosts too. The N1k would automatically bundle (port-channel) the interfaces that belong to the same ESX host (accomplished through the 'channel-group auto' command)
If you need the interfaces to carry separate sets of VLANs, then you need a different port-profile.
Port-profile is just a container for a common set of configuration that you can apply for multiple interfaces across multiple hosts.
Thanks,
Shankar
Similar Messages
-
I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login. I tried the method where you go into single user mode and type in commands, however that method uses some of the letters that are not working on my laptop.
You didn't mention which version of OS X your running but there are password reset utilities provided OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support or OS X: Changing or resetting an account password - Apple Support
Alternately you can use an external keyboard to log in and change the password. Make a backup if you don't have one, it's likely that your problems aren't over. If that water continues to migrate downward and fries the logic board your macbook will be toast. -
I have a brand new macbook with microsoft office loaded. I set outlook as the default mail. i would rather go back to mac mail but can't figure out how to do it. any ideas?
Thanks for any help
LouI have a similar problem: I switched from mac mail to Outlook 2011 as the default client, and want to switch back. Mailto links (eg from browser etc) default to Mail. However, when I try to email a Word document as an attachment, it continues to open Outlook. Outlook has a button in its prefs for making it the default client, but I don't see a way to turn this pref off in either Outlook or in Word.
-
I loaded my ipad photos from camera and all the pictures sorted by date. I later sync my ipad with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files other than reloading all of them from camera?
What version of iPhoto?
Select one and rotate it. Then rotate it back. Does that make it appear?
A much better work flow is the keep the photos after importing. Check the success the import, wait for at least one successful backup cycle then use you camera's format command to reformat the card
LN -
I downloaded ios6 on iphone 4s & now cannot call out or receive calls. Any ideas on how to fix this?
What if you repair your phone with PCC
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
I have the iphone 3GS and recently downloaded the iOS 5.0.1 software. I can open my apps; however, after a few minutes (sometimes seconds) I am booted out of the app. Any ideas?
Dowload any new free app from the App Store.
-
My Apple Mac Harddrive went for a real bust up about a month before my warenty expired...Apple repaired no problem...I had exstended warrenty...
but when the computer came back it was not the same...
I also did not have time untill now to start sorting through the mess, one of the things I am sorting.... is to get my Final Cut Studio Pro 7 up and running...
I bought the disk set (box) with the lap top, back when I first bought my MacBookPro, everything together ......I loaded the disks package onto the computer back then no problem and have had the disk in a cuboard since then.....
I tried to reload the package onto my computer but the first disc....the ICON disc just keeps getting kicked out....
without it I cannot load my Final Cut Package....
What should I do?Glen South Africa wrote:
took my discs that I brought into the store, found an older computer that was capable of reading the discs, then they created a mirror image which they saved to file, they put this file on an external hard drive (memory stick) and then loaded it onto my computer.
FWIW, I've had malfunctioning optical drives that could play video DVDs, but not read installation DVDs…or able to read install disks for Apple apps, but not third party apps.
the disc version (Final Cut Studio Pro7) that was sold as a box set with everything included (motion/color and so on) is not realy supported by the newer Apple's as you now have to buy Final Cut X Online, download and pay for everything seprately.
It's true that Apple stopped supporting Final Cut Studio applications, but I don't know any reason why they shouldn't install and function with newer OS versions and Macs (as long as a working DVD drive can be connected).
Russ -
error message comes up and blue tooth freeks out
Any ideas hoew to get bluetooth phone and use music out put at the same time?Hello,
Do you know the error message? it's a good idea when you receive an error message to include them in the forum it will allow us to better help you. So to get a better understanding of your problem you are attempting listen to music via bluetooth as well as use a hands free device? -
hello proud but frustrated owner of new imac/////have connected usb superdrive but unable to work out how to burn dvds any help?? simple but strange i guess
thankyou for reply...i am trying to burn a video that is on my hard drive on imac.....do i have to dowload burn software? I did try that from some obsucure source on the web but seem to have lost any connection with it now
i dont get any error message
i just clicked on the video i wanted and hit burn but nothing after that -
My iPod touch (5th generation) is not charging. I have checked the cord and cleaned out the charging port and it still won't charge. Any ideas or suggestions?
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use. I do ot know what youmeant by "have checked the cord ")
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
HT4623 I keep getting kicked off my wi-fi connection. any ideas?
I keep getting dumped from my wi-fi connection. I just made an ajustment to the security level and now I get dumped. My sons phone has no problem. I have been trying to get in to change the security level, but I keep getting error messages. I went in just last night and made the changes. I don't know whats going on there, but as I said, my sons phone has been working fine since he initially asked to join the network. Any Ideas?
You have to be connected to the network for that to show up. When you go into wifi the network you are connected to (yours) should be listed and if it is, then tap on the arrow to the right and at the top of the screen it should allow you to forget the network. If you cannot get connected to the network long enough to do that, then do the reset network settings I mentioned above.
-
IPod dead after carrying out RECOMMENDED security update! Any ideas?
At the beginning of December 2006, I installed the most up to date version of iTunes when prompted to do so. I was then informed by iTunes that my iPod required a security update and so I downloaded this update. My iPod (5th Generation model) seemed to freeze half way through the process. It keeps attempting to load and then crashing when I try to switch it on. The iPod is now no longer being recognised at all by My Computer. I tried all of the recommended troubleshooting steps and advice with no success.
My iPod now doesn’t even turn on properly and given that the PC doesn’t recognise there is a device attached to it, we cannot take any of the troubleshooting steps to fix it.
If changes had been made to the PC, these may have caused the problem and I could have looked at some troubleshooting solutions such as tweaking with the PC registry, updates of drivers etc. However, it is clearly not a PC issue as I have tried to plug the iPod in to three PC’s with no success. The iPod hard drive no longer starts so I'm 99.9% certain it is an issue with the iPod hard drive – the security update has essentially scrambled/killed the iPod hard drive and it seems to need to be completely reset. I have tried the '5 R's' and that did not work. I also managed to get the iPod into diagnostics mode and it says it has issues!
I have had absolutely no problems whatsoever with my iPod prior to attempting this security update (which was recommended by Apple). The iPod has therefore mal-functioned through no fault of my own – if I hadn’t been prompted to download this security update, I have no doubts that it would still be in good working order.
Any ideas!!
PS - this essential security update and subsequent death of my Ipod occurred exactly one day after my 1 year warranty expired!! Call me a cynic but do I smell a rat?
5th Generation iPod Video 30GB Windows XPMy problem started after downloading 3.1.2. It gave an error message that said it could not install the program due to an error. It gave me the option of sending the error message to Apple. I declined. My ipod now only displays a screen that shows a usb cable being plugged into itunes. The computer will not read it and it will not sync. My ipod is basically dead. Ive tried all of the fixes to restart it but have had no success. Holding down the power and home button did not work. I held it for nearly 20 seconds. The power will shut off then the apple will appear. Then the usb cable appears again. I purchased my ipod on 10-1-09. Im going to take it back for an exchange.
-
Having trouble configuring my cogeco email on the iphone 4s, any ideas how to do this.
Sending/receiving or just sending? I was previously able to get a "sending only" problem to work by setting up Rogers (my carrier) as an alternate smtp server [smtp.rogerswirelessdata.com]. It used to work OK but on my new iPhone it no longer works and I have no idea why. It will try to send the email forever and seems to drain the batter given time. Apple tech support was unable to help and Cogeco was less than helpful. I've given up for now and started using Gmail to consolidate all my email accounts.
-
Nexus keeps loosing connection, any ideas???
Just got my Nexus yesterday but it keeps loosing data connection, wifi does the same. Help!
Hi,
If this is to the AIM server and you are using the SSL option try it without the SSL option ticked.
8:30 PM Tuesday; November 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
IMac kernel panic -- rule out hardware and software! any ideas?
Greetings forum
I am totally at a loss on what to do next. Im writing about a mid 2010 27 inch iMac recently upgraded to Mountain Lion. Shortly after this the computer started to experience issues of rebooting itself as clicking apps such as safari. So began the troubleshooting process!
First tried clean install -- ie format HD and internet recover install
everything installed fine and then restart issue again as it experience kernel panic
ruling out the Software I was convinced it was a memory hardware issue so I booked appt at genius bar and took it in-- the computer was there for 4 days and the tech said they did extensive testing and could find nothing wrong with the hardware tests!! and they had no advice other than to try a fresh install (again)
I took it home and let it sit for a couple of months as I didnt want to bother with it right away
So I pulled it out again yesterday and decided to do a fresh install after format -- again within 5 min in kernel panicd! This time i think I was searching in safari. BELOW is the crash report
I also decided to load up the diagnostic tool off my iMac disk to test hardware (did the extended test TWICE) and NO TROUBLE FOUND (see photo)
KERNEL PANIC COPY PASTE:
Interval Since Last Panic Report: 476 sec
Panics Since Last Report: 1
Anonymous UUID: C5678BA0-F5C5-7B5C-0D29-E8CD2BAF1AA9
Sun Feb 24 18:05:12 2013
panic(cpu 3 caller 0xffffff80034b7bd5): Kernel trap at 0xffffff80034a1e6e, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x0000000145340dea, CR3: 0x0000000034083000, CR4: 0x0000000000000660
RAX: 0xffffff8003abeb90, RBX: 0xffffff801ce358e0, RCX: 0x0000000000000cc5, RDX: 0xffffff8003abdc88
RSP: 0xffffff808375b4a0, RBP: 0xffffff808375b5c0, RSI: 0xe200b4ff10aff8cd, RDI: 0x0000000000046064
R8: 0x00000000000001ff, R9: 0x0000000000000000, R10: 0xffffff806e379000, R11: 0xffffff8019740800
R12: 0xffffff800c2b8c80, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff8003abdb70
RFL: 0x0000000000010246, RIP: 0xffffff80034a1e6e, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000145340dea, Error code: 0x0000000000000000, Fault CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff808375b140 : 0xffffff800341d626
0xffffff808375b1b0 : 0xffffff80034b7bd5
0xffffff808375b380 : 0xffffff80034ce4ed
0xffffff808375b3a0 : 0xffffff80034a1e6e
0xffffff808375b5c0 : 0xffffff80034a0f7b
0xffffff808375b5e0 : 0xffffff8003464e33
0xffffff808375b690 : 0xffffff8003464f60
0xffffff808375b6c0 : 0xffffff8003424624
0xffffff808375b6f0 : 0xffffff8003424c69
0xffffff808375b720 : 0xffffff7f84f7a6b6
0xffffff808375b840 : 0xffffff7f84f7b441
0xffffff808375b8d0 : 0xffffff7f84f7b5c8
0xffffff808375b920 : 0xffffff8003527bd5
0xffffff808375b970 : 0xffffff8003527804
0xffffff808375ba20 : 0xffffff80036fee3e
0xffffff808375bad0 : 0xffffff8003513626
0xffffff808375bb20 : 0xffffff80037bfc76
0xffffff808375bbc0 : 0xffffff800345c085
0xffffff808375bc10 : 0xffffff800345b593
0xffffff808375bc50 : 0xffffff800345ef13
0xffffff808375bdb0 : 0xffffff80034628da
0xffffff808375bf40 : 0xffffff80034b7fa9
0xffffff808375bfb0 : 0xffffff80034ce411
Kernel Extensions in backtrace:
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0d1)[5461F87D-B177-35 9F-BCBA-AAD93F1AA676]@0xffffff7f84f79000->0xffffff7f84f7cfff
BSD process name corresponding to current thread: Safari
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000003200000
Kernel text base: 0xffffff8003400000
System model name: iMac11,3 (Mac-F2238BAE)
System uptime in nanoseconds: 348505511475
last loaded kext at 50930517136: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f85597000, size 16384)
last unloaded kext at 304923370473: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7f83d17000, size 65536)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleHDA 2.3.1f2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleIRController 320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.kext.AMD5000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleUSBHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.driver.AppleUSBHIDMouse 175.8
com.apple.driver.AppleHIDMouse 175.8
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac11,3, BootROM IM112.0057.B01, 4 processors, Intel Core i5, 2.8 GHz, 4 GB, SMC 1.59f2
Graphics: ATI Radeon HD 5750, ATI Radeon HD 5750, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: WDC WD1001FALS-40Y6A0, 1 TB
Serial ATA Device: PIONEER DVD-RW DVRTS09
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfa130000 / 5
USB Device: Apple Keyboard, apple_vendor_id, 0x024f, 0xfa132000 / 7
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfd130000 / 5
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3Hmmmm, what all is connected at home that wasn't at the Apple Store?
Does it ever crash when not using Safari or Internet?
Can you test your AC power?
Maybe you are looking for
-
Windows 7 Ultimate Does Not Recognize Tungsten E2
After I upgraded to Windows 7 Ultimate, Windows will not recognize my Tunsten E2 cable in the USB port. I went to the Device Manager to look for a triangle in order to use Aceeca. However, there is no triangle. I tried using a USB Drive in the USB
-
Mandatory fields used in up dating vb60(vedor invoice) and ks01(cost centr)
Hi all, can anyone plz send me the mandatory fields along with discription for recording vb60(vendor invoice) and KS01(cost centre). ill award the points plz send me.
-
Whats the diff bet Automatic Req Grouping & Grouping of SC for followondocs
Hi Friends What is the diff bet Automatic Requirement Grouping and Grouping of SC for follow on documents Regards Vinny
-
11g - job_queue_processes parameter default to 1000 (also the max value)
Hi, I'm just playing with my first installation of 11g (11.1.0.6.0 on Windows XP) and I'm looking through the parameters, default values etc. I've noticed that if I create a database without specifiyng a value for job_queue_processes it defaults to *
-
Flash player/Hardware acceleration
We can no longer watch videos in full screen mode on sites such as Hulu etc without disabling hardware acceleration. Many others have this problem as i searched the net and found many other postings. Hardware acceleration is needed with many programs