SCVMM R2 Hangs on removing vmguest.iso from the virtual DVD drive

In addition to dealing with the "INCOMPLETE VM CONFIGURATION" (bug) in SCVMM R2 (which is cleared only with a complete reinstall of the software and database), I have come across a new problem.
1. Find a machine with vmguest.iso in the virtual dvd drive.
2. Change the drive to "No Media"
3. Click "OK"
SCVMM HANGS.

Hi Sir,
Sorry for the delay .
"SCVMM Hangs " happens on all VMs ?
Any operation of VM performed in VMM will case this issue ?
Did you install newest update rollup for VMM server ?
As for this issue , you may try to remove that hyper-v host then re-add it into VMM to check the result .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

How can I remove a CD from the interal DVD drive? The drive does not eject with the keyboard.

I have been trying to install Bootcamp. The system is now has a Windows XP Pro install disk in the DVD drive and I can not get the drive to eject nor can I get back to a Mac volume boot. There two internal drive, one Windows partinioned by Boot camp, the other Mac boot volume.
I need to get get back to a Mac boot state - are there any suggestions?
Thank you

To choose from all available boot drives, Restart and hold the Option key.

How to remove a CD from the G4 CD drive

I think this is a new take on the old "stuck CD" problem.
I was stupid enough to launch DiskWarrior from CD on a Mac with an empty hardisk. One of those fairly late single-processor G4s with a CD drive built like a brick: no emergency paperclip hole and no way to manually open the drive except with a hammer.
There's no key or button that'll solve the problem either cause by the time the computer reacts to input from the mouse or the keyboard, it has already launched and locked the CD.
Does anybody see a way around this or should I just break open the CD to retrieve the disk?

Hi Frank, and a warm welcome to the forums!
There still is that paper clip hole, but on some G4s you have to remove the faceplate or even drive to do it.
Does it boot into Open Firmware with CMDOption+of ?
http://docs.info.apple.com/article.html?artnum=42642
Boot into Open Firmware and eject If you have a Mac that will not startup properly and has a stuck disc, try booting into Open Firmware by holding down Command, Option, O key and F key during startup. After booting into Open Firmware, type the command eject-cd.

Booting from an external DVD drive

I have a 2006 Intel iMac with a Samsung model SE-208 USB DVD drive attached to it. How can I boot from this drive instead of using the internal DVD drive.

Everytime I try to load a DVD-RW disk, it gets stuck in the drive. That's why I am trying to boot from the external DVD drive. When I try to boot from the external DVD drive, it doesn't even show up when I press the option key on startup.
I spoke to a friend of mine who just bought a new iMac with the external Superdrive. It works fine. She can boot from it no problem and it only runs from the USB port.
All of my DVD-RW's mount on the desktop no problem from the external USB burner.

How to remove available downloads from the list

how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?

There is not a way to remove them from the list. Just let them download, and then delete them from your library when they are done.

How do you remove a symbol from the stage in Edge animate?

Hello-
I'm wondering how to remove a symbol from the stage in Edge Animate so you can jump to another place in the timeline. In Flash, the symbol was only on the stage for the amount of frames you indicated. Not sure how it works here.
For example, I have 2 buttons on my first screen with some text that animates in. I want the button click to take the user to another section in the timeline or (basically another scene, like in Flash) that contains different content. If I change the visibility the buttons are still there and will ( I assume) create problems when other elements are placed on top.
Or is the only way with code. If that is the case what would that code be?
I would appreciate any help.
Thank you!

What I usually do, is, once you have everything set up in the scene you are done with. highlight it all
right click
group elements in DIV
Now all those items act as 1 group and then you give it a properties name, much like a symbol.
THEN you can refer to that scene name and move it anywhere or hide it and slide in another scene that has the content for that next scene.
basically you take all the elements that make up 1 scene, gruop it up, name it, and then in the code for the button say something like:
on click:
scenename.play(framenumber);
that will then animate that scene according to any animation you gave it, such as moving to the left, off stage. while moving scene 2 that you create into the stage.
or just have something like this hide it
sym.$("scenename").hide();
sym.$("scene2name").show();
but if you do that, make sure in your CompositionReady code you hide all scenes EXCEPT the 1st one, so the user doesnt see them all instanatly anyway.

How to remove characters/lines from the beginning of an InputStream

Hi,
I have a program which receives several InputStreams. From each of these streams I have to remove 2 lines from the beginning. After the lines are removed, all the streams are combined to one with SequenceInputStream and read in one chunk. Is there an easy/simple way of doing this?
One option I thought would be to read the char by char until 2 end of line chars have been detected and then read the rest of the data to a buffer. And the create a ByteArrayInputStream out of this buffer. Problem with this approach is, that the amount of data can be large, so putting all the data in to memory might cause problems.
Another option is to use BufferredInputStream and use the readline() method twice to get rid of the lines that are not needed. After this I would write the data to some output stream, which is then converted back to input stream. Propably would work, but sound too much of work for a simple thing like this. There has to be better way.
To make it simple, what I need is a method that looks like the following, or something similar
* Removes n number of lines from the beginning of a InputStream.
* @param is InputStream where the lines are removed
* @param numberOfLines int value to indicate how many lines whould be removed
* @return InputStream where lines have been removed.
public InputStream removeLines(InputStream is, numberOfLines);Thanks.

Here's the code, feel free to use it. Comments are also welcome.
public InputStream removeLinesFromTheBeginning(InputStream is, int numberOfLines) throws IOException
          char c = 'c';
          int i = 0;
          for(int n = 0 ; n < numberOfLines ; n++)
               do
                    c = (char)is.read();
                    System.out.print(c);
                    if(c == (char)-1)     // end of stream reached before any newline characters were found.
                         return null;
                    i++;
               while(c != '\n');
               System.out.println();
               System.out.println("Characters removed:" + i);
               System.out.println("n: " + n);
               i = 0;
          return is;
     }Edited by: dave_spaghetti on Jun 16, 2009 5:42 AM
Fixed a bug.

HT5622 We have two iphones with the same Apple ID. Since I installed iOS this morning I have started receiving all my sons texts and when I send him a text it is delivered to both of us. How can I remove my phone from the joint Apple ID and remove myself

My son and I both have iphones with the same Apple ID. Since I installed iOS this morning I have started receiving all my sons texts and when I send him a text it is delivered to both of us. How can I remove my phone from the joint Apple ID and remove myself from finding out what he is up to during Freshers week!

You have to use a different Apple ID for your son.
Read this note:
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family
still valid for ios 7

How do I remove an app from the menubar

I deleted an app form my lanchpad when it was requesting a password as resident on the menubar and when I try to quit it at the menubar it does not close. How do I remove this app from the menubar?

Command-click it and drag it out. If that doesn't work, find and run an uninstaller for that application.
(86726)

How do I remove an app from the update list that is under someone else's apple id?

How do I remove an app from the update list that is under someone else's apple id? So this way the update always fails because it asks for someone else's password. I don't have the app on my mac, it only appears in the update list. It's just annoying, because the update keeps appearing, and the reminder keeps reminding me that I should install a new update.

You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, the App Store may prompt you to update "Angry Birds" or "Twitter," but the hacked app may be something else entirely. Don't make any assumptions about which app you're looking for. To find it, you must carry out a systematic search with Spotlight.
1. Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
2. In the Finder, press command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
Other...
A sheet will drop down. In that sheet, select
Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
4. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Move each such item to the Trash, after quitting it if it's running. You may be prompted for your administrator password. Empty the Trash.
Quit and relaunch the App Store. Test.
If you find these instructions confusing, ask for an alternative method.

How can i remove favourite people from the top of my iPhone !

how can i remove favourite people from the top of my iPhone !

Hey donyh1,
Thanks for the question. You can hide the recent contacts in the multitasking screen by navigating to your Contacts settings:
Contacts settings - iPhone
http://help.apple.com/iphone/8/#/iph96b20610
Thanks,
Matt M.

I bought my friend's used laptop. She doesn't know how to get her itunes account off the laptop, so I'm not able to do anything. How do I remove her account from the laptop?

I bought my friends Toshiba laptop. Her itunes account is on there, hooked up to a credit card. She doesn't remember her ID. I think I had it emailed to her by typing in her email address and first and last name. Now that she probably HAS her Apple ID and Password, how do we remove her account from the laptop so I can use MY itunes?

Delete the ENTIRE iTunes folder from her user directory.
Frankly, you should be restoring the laptop as new, either using the restore CD provided by Toshiba or by reinstalling Windows with a Windows CD to remove ALL of her personal information.

How do I remove unwanted updates from the App Store?

How do I remove unwanted updates from the App Store? So you understand better what I'm referring to:
I have the App Store icon in the Dock. When there's an update a red number appears on said icon. Well, I went to check on the updates and it's for 4 different applications I either no longer have or use. One of them is an update for Lion OS users. I'm still on Snow Leopard, so it doesn't even apply to me.
So there they sit... I'm not going to download the updates... so how do I get rid of them?

Hi Andy ..
no longer have or use
If there are updates available for apps you have deleted, try this.
Go to ~/Library/Caches/com.apple.appstore
Move the Cache.db and Updates files from the com.apple.appstore folder to the Trash.
Empty the Trash, restart your Mac.
For any apps you still have installed but do not use, the updates will still be available from the Updates top of the App Store window and show on the red badge on the App Store icon in the Dock.
edited by: cs

How to remove SD Card from the Card Reader slot - Satellite A100?

Hi,
Is there anyone to help me? I inserted a 64 MB SD card in the card reader slot of my Toshiba A100 model. It's the first time i have inserted the card. The card is inside the slot. I can not take it out! I don't have any idea how to remove the card from the card reader slot. I can see the contents of my SD card, can open the files too. But how to remove it out from the slot. Please help me giving your idea to remove the card out from the slot.
Arjun

Hi
In my knowledge the SD card slot doesnt has a any additional helps like the PCMCIA slot to remove the card.
You have to remove it simply. Try to grab the card and move it out. You can try to use the pair of tweezers. Maybe it helps

HT4314 How do I remove Game Center from the IPhone 3G?

I do not want this app because there are games that were put on there that I did not were being put on there and I cannot remove them and would like to know how to remove this app from the IPhone 3G? Does anyone know how to do that ? Please help to get it off my phone!

You can't remove a native app that came with the phone

SCVMM R2 Hangs on removing vmguest.iso from the virtual DVD drive

Similar Messages

Maybe you are looking for