SCVMM R2 - "Incomplete VM configuration" and other bugs like "failed" status

Noticed a lot of machines in SCVMM go into an irreversible "INCOMPLETE VM CONFIGURATION" status. All options to manage the machine are then grayed out. A couple options like "repair" and "refresh" are available,
neither of which solves the problem. These machines are up and running with no related errors in our Hyper-V cluster. There is also one in a "failed" status with the same symptoms.
When is this bug in SCVMM going be fixed? This is supposed to be enterprise VM management software? Right now, I can't even manage 10 virtual machines with SCVMM because of a BUG. I have to
go to the failover cluster manager or the Hyper-V manager.
I really don't want to wipe out the entire cluster from SCVMM and readd it, because removing the cluster from management uninstalls the SCVMM agent on all servers. Needless to say, adding the cluster back to SCVMM management would (ridiculously) require
a reboot of all servers in the cluster to "reclaim storage." Just confirmed that this will happen in my test environment.
If there is a supported way to fix this, please let me know.
I am by far not the only person that has noticed this problem (try google), but there are no good supported solutions out there.

Hi john,
Possible causes for an Incomplete VM Configuration status include:
          A configuration file needed for this virtual machine is missing, was accidentally deleted, or is inaccessible because of insufficient permissions. Such files include the virtual hard disk files (.vhd)
and any additional virtual hard disk files in a differencing disk hierarchy (associated with checkpoints), ISO images (.iso), virtual network configuration files (.vnc), and virtual floppy disks (.vfd). A missing configuration file can be the result of unmasking
a LUN on a storage area network (SAN) to a different server.
          A virtual hard disk (.vhd) was deleted without removing the virtual hard disk from the virtual machine in Virtual Machine Properties.
          A library share was deleted, and an ISO image on the share was linked to a virtual machine deployed on a host.
          The .vmc file was manually updated or has become corrupted, and Virtual Machine Manager cannot parse the file.
          If a newly discovered virtual machine has Incomplete VM Configuration status, the cause is always a missing virtual hard disk. If other files are missing from the virtual machine—an ISO image (.iso),
a virtual floppy disk (.vfd), or a virtual network configuration file (.vnc)—a job warning is logged without placing the virtual machine in an Incomplete VM Configuration state. To find out more about the issue that caused the Incomplete VM Config statue,
view job details in Jobs view of the VMM Administrator Console for additional information. For information about using Jobs view, see "How to Monitor Jobs" (http://go.microsoft.com/fwlink/?LinkId=98633)
in VMM Help.
As to solution please refer to following article regarding this state :
https://technet.microsoft.com/en-us/library/bb963764.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .
1. The config file for the virtual machine is not missing, the machines work flawlessly in Hyper-V manager and failover cluster manager.
2. None of the other solutions apply.
3. Why is "repair virtual machine" in the solution for this? Absolutely does not work.
Forgot to add, I now have a virtual machine that is showing that it has been migrating for days (in SCVMM only of course).
What I believe happened is that SCVMM has a hard time recovering from the famous cluster errors for Hyper-V , 1146, 1230, 5120, and 5142.
In my opinion, the fix is this:
Have Microsoft fix the buggy SCVMM code.

Similar Messages

Where can i find configuration and other aspects of SAP learining solution

where can i find configuration and other aspects of SAP learining solution
Ross

Plz go through below URLs:
[http://saphrexpert.blogspot.com/2009/01/lso-configuration.html]
[http://help.sap.com/erp2005_ehp_04_sp/helpdata/en/69/415a2b9208485380091d5e3c659c26/content.htm]
Mohan

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). I can't figure out how to disable.

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). Whenever I try to use a tool, a blue box appears around the line and I have to double click it to manipulate it, which opens just that line in a semi burred screen where all the other objects are semi-grey in the background. I can manipulate this line in this screen but nothing else at that time which I could do about 5 minutes ago. For exampe, I no longer can join up 2 lines drawn by the line tool together. For some reason this started randomly (probably due to a accidental shortcut combination) and I just can't put it back to what it used to be. I have inserted a video hopefully showing what I mean. Any help would be appreciated.

Thank you - Just what I needed

If I do a creative cloud membership does it give me two computers and other devices like an ipad? Or just one computer one mobile device?

If I do a creative cloud membership does it give me two computers and other devices like an ipad? Or just one computer one mobile device?
Thanks

You can have functional installations on two machines. The machines have to meet the system requirements for the software.

Videos on my iPad are playing 2x. It seems to happen more prominently on videos via Safari and other apps like Fox News. Sometimes I can alter the speed by "scrubbing" through the video, but it is inconsistent. I have an iPad 1 running iOS 5.1.1...thanks!

Videos on my iPad are running 2x. I have restored every way possible but still no change. The videos are noticeably faster in Safari and other apps like my Fox News app. Sometimes I can change the speed back to normal by "scrubbing" the video, but that is inconsistent. I have an iPad 1 running iOS 5.1.1 ...thanks for any and all help!

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Ios8 copy and paste / Digital AV Cable / internet dropping and other bugs!

hello -
so like everyone else else there is a number of bugs I am running into. so here's my list- Yes I've tried to restore, so I am praying that the ios8 update will contain these fixes:
- copy and paste doesn't work between applications- but it's sporadic! (issue originally found when copying from a webpage to an email, then into notes from another webpage)
- my Apple lighting to digital AV cable doesn't "read/transfer" to the TV
- internet randomly drops for a few seconds to minutes for no apparent reason the it being an iPhone 6
- Facebook and other internet heavy apps like Associated Press are extremely lagging or give me an error unable to connect to server
- randomly freezes while taking pictures or taking notes- it won't even let me shut down
- voicemail set up doesn't work
I am sure there are more bugs but haven't seen them or I've forgotten about them! If anyone else has these problems please check the box that you do have the same issue. Also any known resolutions would be appreciated!
With Joy,
Christina

Another file?
Do you mean folder? Inside or outside iPhoto?
I'm trying to copy photos to a Sony Digital Photo Frame.
Select the photos you want to use.
Export them to a folder on the Desktop. File -> Export
Add that to the device.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

Aperture cannot import anything from iPhoto and other bugs!!

Aperture is buggy. Recently, I just updated Mac OS X to 10.4.5 and also updated iLife 06. Now I cannot import anything from iPhoto. I tried import images from iphoto or import iphoto library, both not working. I can import images from other directories but jut could not see anything display under iphoto library directory. Trying to use import iphoto library, click choose and then nothing happens.
If you create a smart web gallery, all photos will be automatically duplicated.

I used Pacifist.app to find iPhoto in the iLife '06 install package and then installed the app in the default location replacing the bundle that was there.
the normal method gave me an install error.
Thank you to the person who discovered this.
I was going nuts trying. I have 6 iphoto libraries with 30,000 photos in total and some would import fine and others would not. couldn't tell the difference between them and had forgotten the update. just got a new iMac intel and wasn't paying attention. Causality

Is ProBook 4520s capable of running MMORPGs and other games like Medal of honor and that stuff?

well, i recently bought Hp ProBook 4520s. it is great,fast and i really like it but it has a problem, i can't run MMORPGs or other games that have good graphics like Medal of honor and generals zero hour and counter strike and that stuff. when i analysed my laptop using few programs and websites i found such a strange thing. it should run these games perfectly but just got 1 simple problem. it seems like if it got no video card !!!! Video ram 0.0 B!!! No 3D No hardware T&L! Pixel shader version 0.0 vertex shader version 0.0!!! here is the link to the site i used to analyse it......... please try to help me because i am trying to solve that problem for more that 2 weeeeeks !! and thankssss for helping me C u later

Do you know what kind of graphics card you are supposed to have? Try to reinstall the drivers for your model. Click this link to go the HP Support. You can click "Automatically detect it" to get the right model. It should take you to the support page for your model. It will have the drivers you need.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
You probably need a dedicated graphics card for those games. Intel HD Graphics isn't made for gaming.

Help!!! My iPad settings icon and other apps like facebook, gmail is gone

While i was playing fruit ninja , I lock the screen for a while then when I continue , i unlock my iPad with Recognizeme the scanning is fail so I typed the passcode
Then it unlocked but the problem is MY SETTING ICON AND OTHER APPS ARE GONE AND ALSO THE RECOGNIZEME APP

Shut down all apps in the multitasking bar:
*iOS 7/8 closing running apps*
Double-tapping the Home button will bring up the running apps icons along with an app screenshot "card" above the icon. Tap-drag the app's -card- (NOT the icon) up and off the screen.
Afterwards, reset the iPad:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
The iPad 2 has only 512MB of RAM for running apps (as opposed to simply storing apps on the device). iOS supposedly manages this memory and will automatically close off apps as needed but in practice with my limited use of an iPad mini 1 (which also has 512MB of RAM), I've found that you need to manually close off running apps for the device to work properly. Newer devices like the iPad 3, 4, mini 2 and later have 1GB of RAM for running apps...the iPad Air 2 has 2GB. These devices are not as prone to crashing due to low memory instances.

Difference between XML Publisher and Other tools like Aventx

Hi,
Please bear with my newbie question. From all the XMLP documentation that I have read, it seems like XMLP is the tool that I would need to distribute my ERP information either through print/fax/email etc. However, I have also been hearing about tools like Aventx which is a layer above XMLP and helps in delivering documents through fax/email etc.
What basically is the difference between XMLP and these other tools? Can I not just have XMLP sitting on top of my ERP and have my documents delivered without investing in these other 3rd party tools?
Thanks,
itzmey

Hi Itzmey
THe short answer is yes you could avoid the 3rd parties but, there is always a but. XMLP with extract the data, format the data and generate the ouput all completely integrated with the rest of the Apps techstack. However for the delivery you are going to have to write some custom code to get the documents out of the system i.e. we have not integrated the delivery of docs with the conc manager yet ... no I dont have a timeline at the moment. I wrote a series of articles on the blog about delivering from EBS http://blogs.oracle.com/xmlpublisher. Its not that tough but its a custom solution.
AventX and others fill that gap we have admirably. Yes, its a thrid party solution but its a very well thought out and integrated solution that they will support you on, etc.
So its up to you, custom or third party.
Regards, Tim

Audio and other Bugs in 2.0 - are they fixed in 3.0?

I just completed creating an e-learning course using
Captivate 2.0 that used quite a lot of graphics and video. The
numbers of bugs I experienced when publishing to Flash in 2.0 were
so substantial that the delivery date had to be delayed almost two
months, much to the unhappiness of the client. I'll list the most
frustrating problems and hopefully someone can tell me if these
issues were fixed in 3.0. It's difficult for me to justify an
upgrade if I'm going to run into the same horrible problems.
I will start out by stating that I keep my project files
under 20 slides and all the slides have audio. The slides are 800 x
500 and none of the animations/video I'm using are more than 20
secs long. I'm running Captivate 2.0 on a Dell laptop with an Intel
Core 2 Duo, running Windows XP (with all the updates) and with 1 GB
of RAM. I've upped my Virtual Memory to 5 GB. My machine meets all
the specifications listed for Captivate 2.0, but I suspect that one
really needs a much faster machine with a lot more memory to work
at anything other than a snail's pace. I also make sure that no
unused graphics or animations are left in a project's library and I
defrag my hard drive at least once a day (if I don't Captivate
crashes everytime I try and open or save a file).
Problems:
- It takes up to 15 minutes to open or close a file. It
doesn't matter how big the file is. And the more files I open and
close in Captivate in any session, the slower my machine gets and I
evenutally have to restart it. It also takes 10-15 minutes to save
some of my project files, whose sizes have ballooned for no reason
(see below). If Captivate crashes during the save or even right
after a file is saved, the file is corrupted and cannot be opened.
I've had to redo work two or three times because of this problem.
- A project file with 10 multiple choice quiz questions and
two other simple slides (and only one brief audio file) is over 1
GB in size. I can't have more than 10 quiz questions because the
file sizes get so large that the program crashes before I can save
the file. I also have a number of 3-slide projects with graphics,
no animations, and some audio that are over 1 GB in size. But then
I have 20-slide project files with a lot of video and graphics and
audio that never go above 200 MB. In fact, all my project file file
sizes seem enormous for no good reason. And it's not from orphan
files in the Library. It's going to take like 10 DVDs to turn over
all my project files (about 40 project files - all under 20 slides
each) to the client. It's ridiculous!
- If I import audio as a WAV file and then publish the
project to Flash, the audio either moves to different slides or one
audio file gets repeated in all the slides. The only way to fix
this is to convert all the .WAV files to .MP3 files (but at a very
low bit rate), delete all the old WAV files from the project, and
replace them with the MP3 files. Using a WAV file always leads to
major audio scrambling when I publish to Flash.
- If I use a .MP3 audio file with a higher bit rate, when I
publish to Flash, the audio is slowed down by about 50%.
- Graphics fail to show up in the .SWF file after a publish
to Flash. This is entirely random and different graphics are
affected each publish, so I never know what the published file will
look like.The only way to fix this is to go back to the Project
file, double click on the graphic and make a change to one of the
options, save the change, reopen the graphic and change the option
back to the one you started with. Then cross your fingers that
another graphic won't vanish during the Publish process.
- Objects that I have fading in and out on the timeline work
perfectly in the project file, but when they are published as Flash
output, the timings are all off by up to 15 seconds. This happens
on a couple of slides and I can find no explanation or way to fix
this. And it's completely random. One publish may have the timings
out of whack and the next one has the timings correct.
- Adding any animation to a project file causes all drop-down
menus to stop functioning. I see from other posts that I just need
to click on an object in the Library. Wish I had known about that
sooner. I ended up restarting Captivate a lot.
- After closing Captivate, it takes 15 minutes or more before
my machine works at anything like it's normal speed. If I try to
shut down my machine right after closing Captivate, I get an error
message telling me Captivate is still running. It appears that
Captivate does not release memory after it is closed. I have to
restart my machine everytime I close Captivate just so I can
continue working in other applications normally.
These are just the major problems which caused the most
headaches and delays. Most of it seems to be the VERY buggy publish
to Flash option and some problems with releasing memory.
I know a lot of other people have experienced these problems,
as I've read about them in other posts. Has Capitvate 3 fixed any
of these issues? There is no way I'd ever attempt another
e-learining project with Captivate 2. This one about killed me.
Thanks,
Jim

Thanks to everyone who has responded and tried to help.
Unfortunately, none of suggestions have worked.
Here's the update:
- All my files are local, so the business about working on
network drives is not applicable.
- I tried the Save As option to try and decrease my huge file
sizes as suggested by a couple of people. I did a Save As to
another file name, then deleted the original file and did another
Save As from the renamed file back to the original file name. My
file sizes INCREASED each time I saved. I now have a 12 slide
projects file with multiple choice quiz questions, no video,
minimal graphics and audio that tops out over 1.1 GB.
- I can't copy slides from one file to a new file because the
file I want to copy slides from is so large that Captivate crashes
everytime I try to Import slides from another project.
- No one has mentioned anything about all the bizarre, random
things that happen to graphics and audio when you publish to Flash.
This is by far the most frustrating aspects of working with
Captivate 2.0 - there is no telling what will turn up in your .SWF
file and whether the audio will be on the correct slide. I've seen
several posts about the problems using WAV files for audio or about
MP3 files being slowed down in the SWF files but no one can say if
these problems have been fixed in 3.0. Likewise the disappearing
graphics and the inexplicable timeline delays when publishing from
my Project file to an SWF file. And now a new one has popped up: in
the SWF file, the screen size suddenly gets smaller on several
slides, then goes back to normal!
- It sounds like I need a lot more memory and faster machine
(despite Adobe stating that my machine should be adequate to use
Captivate) to deal with the slow performance, constant crashing,
and frequent corrupted files. But this can't possibly explain the
extreme file bloat and all the Publish errors when creating SWF
files.
At this point there's no way I can upgrade to 3.0 because of
all the problems with 2.0. I can't make a justification to my boss
to spend more money on a software program that (from his
perspective and mine) does not work as advertised and has impacted
this project so dramatically.
It sounds like I'm the only Captivate user who is
experiencing these difficulties, which is really perplexing and
bizarre. Perhaps Captivate and Dell laptops are not compatible? I
sure do wish that Captivate had a Mac version. At least there
wouldn't be the usual Windows software excuse of "it must be your
machine."
Sigh... I sure did want to like Captivate, but everytime I
open the program I get the hebbie jebbies, expecting some new
disaster to befall me.
Jim

Listener configuration and other questions

I have installed 2 database instances on the same database and under the same database home.
The instances use the same listener. If i try to start enterprise manager in browser for both instances,
the Enterprise Manager starts just for the last installed instance. I have edited the listener.ora file an
added one more Description with another port number like folowing:
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = fusion)(PORT = 1522))
to the following content:
LISTENER_APPDB =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = fusion)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
now the file looks like following:
LISTENER_APPDB =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = fusion)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
     (DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = fusion)(PORT = 1522))
ADR_BASE_LISTENER_APPDB = D:\app\oracle2
SID_LIST_LISTENER_APPDB =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\app\oracle2\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\app\oracle2\product\11.2.0\dbhome_1\bin\oraclr11.dll")
i have also changed the port of one of the instances in the tnsnames.ora file from 1521 to 1522.
Now it is possible to start Enterprise Manager for both instances. But after i connect to one of the
instances with the Enterprise Manager the other instance logs of. Is it ok so??? Will i have problems
with this configuration?? Should i do something different??
Second question: After i have installed an instance, during the installation some patches where
automaticaly installed. After that i have installed another instance. Do i have to patch this instance too???
Are the patches installed for the whole DBMS or just for one instance???
*Third question: If i have 2 instances how can i set the parameter btree_bitmap_plans for only*
one of the instances ??? I have found the following code to do this:
ALTER SYSTEM SET "_b_tree_bitmap_plans"=false SCOPE=SPFILE;
but for wich instance the parameter will be set for both or just for one? Do i have to choose
one of the instances?? How can i do that??
Edited by: 995273 on 21.03.2013 02:49

one listener cannot listen on two port numbers. Just for the precision : why not ?$ lsnrctl stat snoopy
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 21-MAR-2013 12:37:39
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ora11test)(PORT=1522)))
STATUS of the LISTENER
Alias                     snoopy
Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date                21-MAR-2013 12:37:12
Uptime                    0 days 0 hr. 0 min. 26 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /opt/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File         /opt/app/oracle/diag/tnslsnr/ora11test/snoopy/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora11test)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora11test)(PORT=1525)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora11test)(PORT=1527)))
The listener supports no services
The command completed successfully
$

Nokia 701 menu button not working and other bugs

I have a "brand new" 701 with 111.020.0307 that won't update to 111.030.0609 because I'm in Italy .
Now I have a really annoying bug: the menu key, sometimes, stops working and won't bring up the menu if pressed briefly, and won't bring up the task list either (when pressed long).
Anyone experiencing this bug? The only way I found to make it work again is turn off and on again my phone... And the task list can't be found in menus, AFAIK. I could do that with my old 5800XM...
I bought my phone ONE WEEK ago... I really wouldn't like to format/reinstall already! Ideas?

soft reset may solve it. Look in settings and phone management.
Dont have to do a hard reset first. After soft reset, try reinstall the latest firmware through nokia suite if soft reset didnt solve your problem..
I have 701 and I am impressed overall with the device. Actually... I am very pleased with it.
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Resume downloading and other bug

Hi ! everybody ! and sorry for my bad english.
i have a persistant problem with logic x
the first time i had this problem was when i started to used logic x on my imac i7, in july, it repeat t me often to download some sample file or sound bank for logic while I had already download all this files several time.
Then, he stopped asking me for a few weeks, and finally when i opened a song made on my macbook with logic x, it has started asking me to download some files because the files were missing!
So I downloaded, but the message appears again and again like the first time.
i know than i have downloaded all the files several times... so all it's ok but what is the problem?
i'm not the only one in this case, it's a bug no? update logic Please
at the release of logic there was a quick réaction from apple to fix several bug but and now almost nothing !!! hey ! there still a lot of bug in logic x and the réaction has disapeared...
logic x is very advanced on many function and very few debugged on other like...
The disappearance of tonal flex pitch indicator, sometimes it is impossible to see them appear, you must close the song and re-open that for it works.
It is impossible to adjust a tempo change in the global tempo track in the keyboard editor while viewing the contents of a midi part in the editor at the same time the notes disappear when you change someting in the tempo track! which makes this useless function
i don't know for that if it's a bug or not possible?

Also
Every now and then I will open up a random application and it will crash and ask me if I want to ignore it, report it or relaunch it, I relaunch it and it happens again.
The next day it won't happen with the same application but a different one!
dx

Palm Pre - Email and Other Bugs/Issues For Future Updates

Great phone overall, and glad to see there is a support community. Couple things I noticed that I wondered if other users know of fixes to:
- All emails lose line breaks, in that all previous replies are smooshed into one long run on sentence including title block
- Email notifications don't disappear when action is taken on PC
- Be able to delete emails and contacts from the phone without deleting from PC
Other issues not e-mail related, but not sure which forum to post under:
- Cut and paste shortcuts with launcher button don't work (which is why I had to retype all this)
- Cut and paste doesn't work on text you didn't type such as web content
- Add URL entry box to browser menu, or a button for it directly on screen (similar to back button)
- Alarm clock set for weekdays doesn't shut off on weekend
- Snooze and dismiss buttons should be moved further apart
- Alarm clock made part of online backup (late for work the next day when I exchanged my phone)
And most importantly:
- Use cattle prod to get Adobe to release FREE Flash plugin app for browser and make sure to beat Apple to it!
Post relates to: Pre p100eww (Sprint)
Message Edited by kx250ryder on 06-16-2009 09:01 AM

#1 should be to fix the "Next Sync in 0 Minutes" bug with the email. I have the issue and tried everything under the sun so far to fix it. I'll be calling palm tomorrow to see what they can do, however in my research I have found dozens of people posting this issue online, and there are only temporary fixes that work for one sync.

SCVMM R2 - "Incomplete VM configuration" and other bugs like "failed" status

Similar Messages

Maybe you are looking for