SCVMM sp1 snapshot error

I have SCVMM 2012 Sp1 in windows server 2012 R2
I am having a server PC with server 2012 R2 installed and one server 2012 standard for both
Whenever I am trying to take a snapshot I am getting this error 2923
According to other post i have tried all solutions. I have an inter realteck PCI network card with all latest Intel drivers installed.
What are other solutions for this issue

Hi,
did you check if the error message is really true. The '[AnalysisStoredProc].[GetTimeSeriesForecast]' function does not exist."
Does the GetTimeSeriesForecast stored procedure exist ?
Regards,
Cengiz Kuskaya

Similar Messages

Snapshot Error When Adding Article to Transactional Replication

I am trying to add an table articles to my transactional replication setup.   When I do, the snapshot error fails with the following message:
Source: Microsoft.SqlServer.Smo
Target Site: Microsoft.SqlServer.Management.Smo.SqlSmoObject GetSmoObject(Microsoft.SqlServer.Management.Sdk.Sfc.Urn)
Message: Attempt to retrieve data for object failed for Server '<servername>'.
Stack:    at Microsoft.SqlServer.Management.Smo.Server.GetSmoObject(Urn urn)
   at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.BuildSmoObjectArrayAndUrnLookupTable(IDictionary& dictUrnKeyArticleScriptingBundles)
   at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.DoScripting()
   at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.DoScripting()
   at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
   at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
   at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: Microsoft.SqlServer.Smo, Error number: 0)
Get help: http://help/0
Source: Microsoft.SqlServer.Smo
Target Site: Microsoft.SqlServer.Management.Smo.ObjectKeyBase CreateKeyFromUrn(Microsoft.SqlServer.Management.Sdk.Sfc.Urn)
Message: The input Urn must specify Name at level UserDefinedFunction.
Stack:    at Microsoft.SqlServer.Management.Smo.SchemaCollectionBase.CreateKeyFromUrn(Urn urn)
   at Microsoft.SqlServer.Management.Smo.Server.GetSmoObjectRec(Urn urn)
   at Microsoft.SqlServer.Management.Smo.Server.GetSmoObject(Urn urn) (Source: Microsoft.SqlServer.Smo, Error number: 0)
Get help: http://help/0
Specifics:
Transactional replication: Both Immediate Sync and Allow Anonymous are set to 0.
Publisher and Distributer are same server: SQL Server Standard 2008 R2 (10.50.4000.0) on Windows 2008 R2 SP1
If I add even one table article (doesn't matter, I've tried different ones), I get the error above when I run the snapshot agent.
If I remove the table just added and rerun the snapshot agent, it succeeds with the message "A snapshot was not generated because no subscriptions needed initialization", so at least I don't have to reinitialize (thank goodness!).
Any ideas as to what might be causing this, and how I can add articles to my existing publication?
Thanks in advance for your help.

Hi John V.Barone,
I’m writing to follow up with you on this post. Was the problem resolved after performing our action plan steps? If not, according to your error message, we need to verify if it is caused by replicating Meta Data corruption. You can check if there is a bad
row
in “sysarticles” (for a table) or “sysschemaarticles” (for a UDF) for which we do not have a corresponding “ObjectId” in sysobjects . If yes, delete
manually this row
from Published (sysarticles, sysschemaarticles, syssubscriptions) and Distribution DB (MSsubscriptions,sysschemaarticles,MSarticles).
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Server backup Faliure Wth failing with snapshot error

Hi Team ,
One of my VM guest Machine's backup job is getting failed again and again with snapshot error .
When I checked logs I can see Event Warning " VM disks consolidation failed " where currently there is no snapshot is available on this machine.
But When I manually run the snapshot by using by using quiesce Method and then again run backup Job from Symantec , Backup runs fine 7
We are using Symantec Netbackup 7.6.1 and My VM Machine is running on ESXi01 , VM version 9 , Guest OS MS Windo 2008 R2
Any Help Would be really appreciate

Hi,
DO THIS FIRST
             a) Try to do a storage vMotion of that VM and delete the file which are left behind along with the VM folder (if any )
             b) Take a VMware snapshot and after completion , Go for DELETE ALL --> This will update the snapshot records in the VMX file and snapshot configuration file with latest number which is unique while taking the snapshot as per the process.
DO THIS AFTERWARDS
           a) STOP and set to manual service for Volume shadow copy ,VMware snapshot provider and Virtual Disk inside the Guest OS. Wait and Check for schedule backup.

Exchange 2013 SP1 Installation Errors I Cannot Resolve

Good Afternoon All -
Note: I updated this post an hour after posting. Still no solution, but please see updated info at end of this post)
I'm trying to introduce Exchange into an existing, small environment. The server I'm trying to install it onto is an SBS 2011 server (single server.) Even though SBS comes with Exchange, I found out that it's installation was corrupted and someone
had attempted to uninstall it before. Yes, it's being installed onto a server with a DC. I considered creating a Hyper-V VM on the server for Exchange, but thought it may be better to try to install directly onto server instead.
Before I started, I made sure all Exchange data had been removed. I checked for and deleted (if present) all Exchange-related objects in ADSI, ADU&C, files, and registry entries.
When I try to install Exchange 2013 SP1, I get the below errors. I know that some are easily resolved by installing pre-requisites - however - others aren't - especially the pending reboot one. I've restarted the server many times when making
changes or applying various updates and still get flagged to restart during installation. I've tried the SBS 2011 repair disc as well, but had many issues with it. In all honesty, the whole server needs to be wiped and re-installed, but
cannot do at this point.
Besides the errors below, I've zipped up the ExchangeSetupLogs folder and placed them in the link below. Also below are system specs. The only edit I made in them is a find/replace for server and domain name.
ExchangeSetupLogs Folder
System Specs
Xeon E31270 3.4Ghz
16gb RAM
Windows Server 2011 SBS x64 (Domain Controller Role Installed & Used)
C:\ - RAID 1 = 500gb
D:\ - SATA HDD = 320gb
E:\ - SATA HDD = 320GB
Should I perhaps try to install to a VM on the server or think that would use too many unnecessary resources?
Any help would be appreciated - Thanks!
Error:
This computer requires the update described in Microsoft Knowledge Base article KB2619234 (http://go.microsoft.com/fwlink/?LinkId=262359).
Without this update, the Outlook Anywhere feature may not work reliably.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.Win7RpcHttpAssocCookieGuidUpdateNotInstalled.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then
run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
The Windows component RSAT-Clustering isn't installed on this computer and needs to be installed before Exchange Setup can begin.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RsatClusteringInstalled.aspx
Error:
This computer requires the Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit. Please install the software from
http://go.microsoft.com/fwlink/?LinkId=260990.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UcmaRedistMsi.aspx
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Ben K.
UPDATE
I just tried fixing a few things and tried again. Still no luck. Below is what I changed as well as the errors received. Only option was Retry. Can I just not install it onto this environment?
What I Changed
Installed Unified Comm Managed API 4.0 (Required Uninstalling Speech Analysis app before it would install)
Installed KB2619234 for Outlook Anywhere
Installed 12 updates - Server fully patched
Exchange Setup Errors
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Thanks Guys -

Hi,
Agree. Windows Server 2011 SBS x64 can be the problem.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Exchange 2013 Sp1 OWA Error

Hi,
I installed a new exch2013 sp1 server and created few users.
In that Administrator can able to access OWA & Admin Center without any error.
Where Other users not able to access OWA- its prompting error Something Went wrong.
I didn't check with Outlook client.
I gone thru forums and reset the Virtual Directory, Cleared the Exchcanary data 0,1,2 using ADSI edit.
Nothing works. Please help me to resolve this issue.
Regards
Dinesh

Hi Dinesh,
From your description, I recommend you use the Test-ServiceHealth cmdlet to check if all services Exchange server needed are started. If no, please start the services Exchange server needed and check the result.
What's more, please make sure that OWA is enabled for other users.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Exchange 2013 SP1 Installation Error in "Mailbox Role: Transport service"

I tried an installation last week on a Windows Server 2008 R2 but was unable to get it to work. With the value of hindsight, I am inclined to think the error was more with the Web Site making EAC unavailable. I subsequently got it installed in my personal
lab environment by creating a VM with a fresh install of Windows Server 2008 R2 SP1.
With this information I then went back to the customer's site and installed a clean version of Windows Server 2008 R2 SP1 in a virtual machine under Hyper-V. After installing all the prerequisites the install appeared to be going just fine but then in failed
in Step 7 with the following error:
The following error was generated when "$error.Clear();
if ( ($server -eq $null) -and ($RoleIsDatacenter -ne $true) )
Update-RmsSharedIdentity -ServerName $RoleNetBIOSName
" was run: "Database is mandatory on UserMailbox.".
I know MS Exchange hides most of its information in AD so my suspicion is that the failed install on the real server has left some residual information in AD. Note that the original install on the real machine won't uninstall because the prior install attempt
hasn't finished.
The relevant part of the Exchange Setup Log is:
[07/22/2014 14:22:57.0593] [2] Active Directory session settings for 'Update-RmsSharedIdentity' are: View Entire Forest: 'True', Configuration Domain Controller: 'AWSDC.aws.local', Preferred Global Catalog: 'AWSDC.aws.local', Preferred Domain Controllers: '{
AWSDC.aws.local }'
[07/22/2014 14:22:57.0593] [2] User specified parameters: -ServerName:'EXCHANGE'
[07/22/2014 14:22:57.0593] [2] Beginning processing Update-RmsSharedIdentity
[07/22/2014 14:22:58.0031] [2] RMS Shared Identity user 'CN=FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042,CN=Users,DC=aws,DC=local' (originating server = 'AWSDC.aws.local') is being linked to computer 'CN=EXCHANGE,CN=Computers,DC=aws,DC=local' (originating
server = 'AWSDC.aws.local').
[07/22/2014 14:22:58.0156] [2] [ERROR] Database is mandatory on UserMailbox.
[07/22/2014 14:22:58.0156] [2] Ending processing Update-RmsSharedIdentity
[07/22/2014 14:22:58.0156] [1] The following 1 error(s) occurred during task execution:
[07/22/2014 14:22:58.0156] [1] 0. ErrorRecord: Database is mandatory on UserMailbox.
[07/22/2014 14:22:58.0156] [1] 0. ErrorRecord: Microsoft.Exchange.Data.DataValidationException: Database is mandatory on UserMailbox.
at Microsoft.Exchange.Data.Directory.ADDataSession.Save(ADObject instanceToSave, IEnumerable`1 properties, Boolean bypassValidation)
at Microsoft.Exchange.Management.Deployment.UpdateRmsSharedIdentity.Link()
at Microsoft.Exchange.Management.Deployment.UpdateRmsSharedIdentity.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[07/22/2014 14:22:58.0156] [1] [ERROR] The following error was generated when "$error.Clear();
if ( ($server -eq $null) -and ($RoleIsDatacenter -ne $true) )
Update-RmsSharedIdentity -ServerName $RoleNetBIOSName
" was run: "Database is mandatory on UserMailbox.".
[07/22/2014 14:22:58.0156] [1] [ERROR] Database is mandatory on UserMailbox.
Does anyone have suggestions about what to do with ADSI Edit to fix the problems?
I think I am getting close to having a working Exchange!!

Hi,
Agree with Amit's suggestion. Please use the following cmdlet to re-home the arbitration mailbox which does not have database attribute stamped and check the result.
Set-Mailbox "FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042" -Arbitration -Database "xxx"
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Exchange 2013 SP1 prerequ errors

Current installation. 4 Exchange 2013 machines on Server 2008 R2 platform (VM with Hyper-V), all have CAS and mailbox role installed. DAG across all for servers. 2 servers
reside in main datacenter and 2 on a DR site.
The Exchange installation is at CU 2 and working.<o:p></o:p>
We have 2 domain controllers in the main datacenter (win 2008 R2) and 2 domain controllers in the DR site (Win 2012 R2).<o:p></o:p>
DCDIAG checks out fine on all. Network is fine for all.
Running SP1 installation on the Exchange servers in the DR site results in prerequisites in a bunch of errors which all stem from one root issue: <o:p></o:p>
Error:
Either Active Directory doesn't exist, or it can't be contacted.<o:p></o:p>
Running the same on the main site (DC= Win 2008 R2) completes prereq for SP1 with no errors.
So the difference is that the 2 Exchange servers on the DR site have Win 2012 R2 for their domain controllers and fail.<o:p></o:p>
Any advise?<o:p></o:p>
Gerhard Waterkamp ACSLA Inc.

No, I am not done.
The situation is that on the DR site SP1 on 2 Exchange 2013 servers (on 2008 R2) using Windows 2012 R2 Domain controllers does not install.
Error messages: ( a whole bunch more, but all related to this)
Error:
Either Active Directory doesn't exist, or it can't be contacted.
It is not resolved but still open.
Gerhard Waterkamp ACSLA Inc.

Vista SP1 update - Error code 0x8007312

After not being able to install Vista SP1 x86 from Windows Update on 32-bit ASUS laptop, I downloaded the stand alone Update to a flash drive, disconnected from the internnet, turned off the firewall, exited Defender and w/no anti virus running
tried to install, same error message w/link to
http://go.microsoft.com/fwlink/?LinkID=101139
Downloaded to flashdrive and ran Reset Windows Update Tool and System Update Readiness Tool KB947821 w/clean boot, then downloaded SP1 update Windows6.0-KB936330-X86-wave1 from your site
(the other was .........wave0.exe), but still got the same error code 0x8007312 when I tried to Update. What do you suggest I do next? Thank you..

After not being able to install Vista SP1 x86 from Windows Update on 32-bit ASUS laptop, I downloaded the stand alone Update to a flash drive, disconnected from the internnet, turned off the firewall, exited Defender and w/no anti virus running
tried to install, same error message w/link to
http://go.microsoft.com/fwlink/?LinkID=101139
Downloaded to flashdrive and ran Reset Windows Update Tool and System Update Readiness Tool KB947821 w/clean boot, then downloaded SP1 update Windows6.0-KB936330-X86-wave1 from your site
(the other was .........wave0.exe), but still got the same error code 0x8007312 when I tried to Update. What do you suggest I do next? Thank you..

Windows 7 SP1 Installation Error - 0x80070002 - ERROR_FILE_NOT_FOUND

Hi,
I use Windows 7 Professional x64. I installed Readiness tool. It was completed successfuly.
CheckSUR.persist
Summary:
Seconds executed: 597
No errors detected
When I try to install Win7 Service Pack 1 (standalone installer), I get File not found error (0x80070002 - ERROR_FILE_NOT_FOUND). In CBS log, I see this error entry:
Info                  CBS    Failed to find file: x86_networking-mpssvc_31bf3856ad364e35_6.1.7601.17514_none_0c80f0c5176cbb85\Firewall.cpl [HRESULT
= 0x80070002 - ERROR_FILE_NOT_FOUND]
I checked whether Firewall.cpl exists in SP1 or not. When SP1 installer gave error message, I didn't close SP1 window (in order to avoid cleanup). I copied
windows6.1-KB976932-X64.cab file from temporary folder which was created by SP1 installer. I extracted this cab file to new folder by 7-Zip program. I looked into this folder.
I found x86_networking-mpssvc_31bf3856ad364e35_6.1.7601.17514_none_0c80f0c5176cbb85
folder that mentioned in CBS log. Firewall.cpl file didn’t exist in this folder.
Finally, I see that Firewall.cpl file doesn’t exist in required location in SP1 standalone installer
How can I solve the problem?
Thank you
CBS Log Details:
2011-04-04 19:57:19, Info                  CBS    Exec: Staging Package: Microsoft-Windows-RemoteFX-VM-Setup-LanguagePack~31bf3856ad364e35~amd64~tr-TR~6.1.7601.17514,
Update: INF_ts_wpdmtp, PinDeployment: amd64_synth3dvsc.inf-languagepack_31bf3856ad364e35_6.1.7601.17514_tr-tr_dcea92f58067a8c3
2011-04-04 19:57:40, Info                  CBS    Failed to find file: x86_networking-mpssvc_31bf3856ad364e35_6.1.7601.17514_none_0c80f0c5176cbb85\Firewall.cpl
[HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    Failed to gather all required files. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    Failed to gather all missing files for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT
= 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CSI
0000000e@2011/4/4:16:57:40.453 CSI Transaction @0x1253f30 destroyed
2011-04-04 19:57:40, Error                 CBS    Failed to pre- stage package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    Perf: Stage chain complete.
2011-04-04 19:57:40, Info                  CBS    Failed to stage execution chain. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Error                 CBS    Failed to process Multi-phase execution. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    WER: Generating failure report for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, status:
0x80070002, failure source: Stage, start state: Resolved, target state: Staged, client id: SP Coordinater Engine
2011-04-04 19:57:40, Info                  CBS    Failed to query DisableWerReporting flag. Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    Failed to add %windir%\winsxs\pending.xml to WER report because it is missing. Continuing without it...
2011-04-04 19:57:40, Info                  CBS    Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing. Continuing without
it...
2011-04-04 19:57:41, Info                  CBS    Reboot mark refs: 0
2011-04-04 19:57:41, Info                  CBS    SQM: Reporting package change for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, current:
Resolved, pending: Default, start: Resolved, applicable: Installed, target: Staged, limit: Staged, hotpatch status: StillGoing, status: 0x0, failure source: Stage, reboot required: False, client id: SP Coordinater Engine, initiated offline: False, execution
sequence: 314, first merged sequence: 314
2011-04-04 19:57:42, Info                  CBS    SQM: Upload requested for report: PackageChangeBegin_Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514,
session id: 101457923, sample type: Standard
2011-04-04 19:57:42, Info                  CBS    SQM: Ignoring upload request because the sample type is not enabled: Standard
2011-04-04 19:57:42, Info                  CBS    SQM: Reporting package change completion for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514,
current: Resolved, original: Resolved, target: Staged, status: 0x80070002, failure source: Stage, failure details: "(null)", client id: SP Coordinater Engine, initiated offline: False, execution sequence: 314, first merged sequence: 314
2011-04-04 19:57:42, Info                  CBS    SQM: stage time performance datapoint is invalid. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2011-04-04 19:57:42, Info                  CBS    SQM: execute time performance datapoint is invalid. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2011-04-04 19:57:42, Info                  CBS    SQM: Upload requested for report: PackageChangeEnd_Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514,
session id: 101457924, sample type: Standard
2011-04-04 19:57:42, Info                  CBS    SQM: Ignoring upload request because the sample type is not enabled: Standard
2011-04-04 19:57:42, Info                  CBS    Enabling LKG boot option
2011-04-04 19:57:42, Info                  CBS    Restored system sleep block state: 0x80000000
2011-04-04 19:57:42, Info                  CBS    SPI: Error callback - 0x80070002
2011-04-04 19:57:42, Info                  CBS    Exec: Processing complete. Session: 30143207_2763256607, Package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514
[HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:42, Error                 CBS    Failed to perform operation. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:42, Info                  CBS    Session: 30143207_2763256607 finalized. Reboot required: no [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:42, Error                 CBS    SPI: (CSPICbsClient::Finalize:737)Failed to finalize session hr=0x80070002
2011-04-04 19:57:42, Error                 CBS    SPI: (CSPICbsClient::ChangeState:519)Failed to finalize CBS session to install package hr=0x80070002
2011-04-04 19:57:42, Error                 CBS    SPI: (CSPCInstallTask::Execute:1010)Failed to install package with identity Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514
hr=0x80070002

From the CheckSUR log, I find one error regarding atiilhag.inf has been fixed. Please run SFC and the update readiness tool again until the logs give the all clear.
From CBS log, I notice the following error message.
"Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SPReview. er=0x2"
I suggest booting in Safe Mode and take the ownership of the registry.
1. Click Start -> type
regedit in the search box and press Enter.
2. Navigate to the following registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup]
3. Right click
Setup folder, choose permission, add everyone account into list with full permission.
4. Click
Advanced button, select the option for Replace all child object permissions with inheritable permission form this object.
After that, reboot in Safe Mode and run Standalone installer again to check the result. If the issue persists, I think the best efficient way is in-place.
In-place upgrade
http://support.microsoft.com/kb/2255099
http://www.sevenforums.com/tutorials/3413-repair-install.html
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks & Regards
Mark Louis

Exchange 2003 sp2 to exchange 2007 sp1 upgrade error

Hi,
We had Windows 2003 DCs and Exchange 2003 servers. We migrated AD DCs to windows 2008 R2 at parent domain.
We have one parent domain and 10 child domains in remote sites .3 remote sites have been migrated to windows 2008 R2.
Now at parent domain I am trying to install exchange 2007 SP1 on a server with windows 2008 R2 SP1. I am facing certain issues:
1. When I run setup /PrepareSchema on this new exchange server , the organization check fails with error stating that : cannot find at least one DC running windows 2003 SP1 or later in DC=xyx,DC=com. This could be the result of moving DC objects in AD. Check
that at least one DC running windows server 2003 SP1 or later is located in the "Domian Controllers" OU and rerun setup".
2. When I try to install exchange server 2007 , I get the following error
Object cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported
by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.".
Can any one shed light on this issue.
Regards
Syed
sa

You cannot install Exchange 2007 SP1 on Windows 2008 R2 SP1 as it is unsupported.
Only version of Exchange 2007 supported when OS is Windows 2008 R2 or R2 SP1 is Exchange 2007 SP3.
Where are you installing Exchange ? child or parent domain ?
2. When I try to install exchange server 2007 , I get the following error "Object
cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.".
Above error indicates that Exchange setup is trying to modify
a version of an object which might have been created when organization is prepared for Exchange 2010. don't you have exchange 2010 Servers already in your environment ?
Please give more information about your current email infrastructure
and whether if you are installing exchange on parent or child domain?
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

Windows 2008 r2 sp1 installation error 0x800f081f

I have two servers that are nearly identical running Windows 2008 R2. Both are Hyper-V hosts. I have applied SP1 to one of them, but am having problems getting SP1 to install on the 2nd one. The downloaded installation fails with 0x800f081f.
I have found
posts that refer to the Remote Server Administration Tools (RSAT) but since this is NOT Windows 7 and I have not installed the RSAT tools, I am at a loss.
I have also found
this thread that seems to be similar to my issue, except the O/S is Windows 7 instead of Windows 2008 R2.
I can see the failure in the CBS.log file, but don't know how to troubleshoot this problem.
2011-03-03 21:38:06, Info                  CBS    Calling client to resolve source, cannot find file 'TsUsbGD.sys' at path: \\?\C:\Windows\Servicing\Packages\amd64_tsgenericusbdriver.inf_31bf3856ad364e35_6.1.7601.17514_none_9872c8452ac8f816\TsUsbGD.sys
2011-03-03 21:38:06, Error                 CBS    Exec: Failed to pre-stage package: Package_for_KB976933~31bf3856ad364e35~amd64~cs-CZ~6.1.7601.17514, file: TsUsbGD.sys,
source: \\?\C:\Windows\Servicing\Packages\amd64_tsgenericusbdriver.inf_31bf3856ad364e35_6.1.7601.17514_none_9872c8452ac8f816\TsUsbGD.sys, sandbox: (null) [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CBS    Failed to gather all required files. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CBS    Failed to gather all missing files for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT
= 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CSI    0000000e@2011/3/4:03:38:06.785 CSI Transaction @0x3316be0 destroyed
2011-03-03 21:38:06, Error                 CBS    Failed to pre- stage package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CBS    Perf: Stage chain complete.
2011-03-03 21:38:06, Info                  CBS    Failed to stage execution chain. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Error                 CBS    Failed to process Multi-phase execution. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CBS    WER: Generating failure report for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, status:
0x800f081f, failure source: Stage, start state: Staged, target state: Staged, client id: SP Coordinater Engine
2011-03-03 21:38:06, Info                  CBS    Failed to query DisableWerReporting flag. Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-03-03 21:38:07, Info                  CBS    Failed to add %windir%\winsxs\pending.xml to WER report because it is missing. Continuing without it...
2011-03-03 21:38:07, Info                  CBS    Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing. Continuing without
it...
I have also attempted an SP1 installation using Windows Update, but it fails, too.
I have installed the
System Update Readiness Tool with no change in the outcome.
I have run sfc /scannow with no effect.
Can anyone assist?
Thanks...Russ

Hi,
I have exact the same problem.
After installing SP1 Windows 2008 R2 through windows update i can not start server manger..
System Update Readiness Tool
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 11.0
2011-03-15 12:29
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
(f)    CBS Watchlist Package Missing    0x80070002    Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~0.0.0.0    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
Checking Component Watchlist
(f)    CBS Watchlist Component Missing    0x80070002    amd64_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_b2c7ff753148df7e    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
(f)    CBS Watchlist Component Missing    0x80070002    amd64_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_b2c7ff753148df7e    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
(f)    CBS Watchlist Component Missing    0x80070002    x86_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_56a963f178eb6e48    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
(f)    CBS Watchlist Component Missing    0x80070002    x86_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_56a963f178eb6e48    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 387
Found 5 errors
CBS Watchlist Package Missing Total count: 1
CBS Watchlist Component Missing Total count: 4

Snapshot Error

Hi all,
Am getting error as Snapshot Too Old Error detected: SQL ID 9txdfxv0pc7cy, Snapshot SCN 0x0000.0014aafb, Recent SCN 0x0000.004a7b31, Undo Tablespace UNDOTBS1, Current Undo Retention 1004. in the ENTERPRISE MANAGER CONSOLE WINDOW..
How can i Solve this Problem?
Please Give a solution?
Thanks in advance..

Osama_mustafa wrote:
Refer to MOS notes :
ORA 01555 "snapshot too old: rollback segment number %s with name \"%s\" too small" [ID 1555.1]
ORA-01555: snapshot too old - Causes and Solutions [ID 1005107.6]
Also Remember when you post your thread always Post DB version , OS VersionMy Database is Oracle 11g R2 & OS Version is Windows Server 2008 R2 Standard..
Sorry for asking MOS Notes means?

Refresh Collection Snapshots Error ORA-12008 ORA-01555

Need some insight!
Ct is implementing R12.1.1 ASCP using existing 11.5.10 EBS as source.
In source EBS, when running Refresh Collection Snapshots (RCS) in COMPLETE mode, we encounter this error:
ORA-12008: error in materialized view refresh path
ORA-01555: snapshot too old: rollback segment number 13 with name "_SYSSMU13$" too small
ORA-12008: error in materialized view refresh path
ORA-01555: snapshot too old: rollback segment number 13 with name "_SYSSMU13$" too small
All the snapshot entities got refreshed successfully (in 5 minutes) but the Refresh Collection Snapshot request itself ends with ERROR (after 4 hrs).
Appreciate your input on this one.
Thanks,
Jake

Welcome to the forums !
ORA-01555 is a common error condition. There are typically two solutions (or a combination of both) -
1. Increase rollback / undo tablespace size
2. Run your process when the database is not active (i.e. few or no updates/deletes/inserts etc).
More information may be available in these MOS Docs
211121.1 - How To Run MSRFWOR - Refresh Collections Snapshots Concurrent Request From The Application
207644.1 - Data Collections is Failing - All Errors - First Diagnostic Steps
306418.1 - 11.5.10 MSRFWOR: Refresh Collection Snapshot Performance Is Poor and Fails with Errors
369173.1 - MSRFWOR Refresh Collection Snapshots Performance Database Bug 4196039
308487.1 - Refresh Collection Snapshot Request Fails Yet The Request Shows Complete Normal
HTH
Srini

AMS Setup Manager Diagnostics Test erroring with "invalid snapshot" error

While running the Diagnostic Test for Setup Manager on the AMS, it's failing with errors in the below stages.
* Testgroup: CheckEBSHome
* Testgroup: CheckAgentStage
* Testgroup: CheckAgentHome
with below error
Snapshot information is not populated
Any idea?
Regards
Sree

OID Setup Diagnostics Test failing due to this 11510 Home Page is redirecting to SSO page, if give login details, i am not able to login to 11510 instance.i created OID user same as 11510 user. i am getting internal server error in the browser.
Thanks,
Panneer.

Time Capsule local snapshot error (MTM FS server)

Hi
I found an error in the console log which happens every second.
It seems the Time Capsule causes this error:
12/01/15 21:28:46.890 mtmfs[4456]: MTM FS server retrying...
12/01/15 21:28:46.891 mtmfs[4456]: MTM FS server failed to start because of error -1
12/01/15 21:28:48.392 mtmfs[4456]: MTM FS server retrying...
12/01/15 21:28:48.393 mtmfs[4456]: MTM FS server failed to start because of error -1
12/01/15 21:28:48.955 k9filter[63]: [2015-01-12 21:28:48] WRN: HostFileMonitor: Hosts file is missing or invalid (1)
12/01/15 21:28:49.163 k9filter[63]: [2015-01-12 21:28:49] WRN: HostFileMonitor: Hosts file is missing or invalid (1)
12/01/15 21:28:49.894 mtmfs[4456]: MTM FS server retrying...
12/01/15 21:28:49.895 mtmfs[4456]: MTM FS server failed to start because of error -1
If I disable the local snapshot: sudo tmutil disablelocal
The errors are gone..
But I've no idea why I get these errors.
I formatted my whole Time Capsule and startet from scratch but the same errors...
I working with Yosemite and the 2nd or 3nd generation of Time Capsule.
Any ideas on this?
I appreciate any help...

Yosemite is actually not just buggy it is broken. The DNS is broken. After you restart the TC for the next few minutes yosemite can find it.. after that it is lost again.
Users have finally got so sick of the situation they have started hacking mDNSResponder back from 10.9.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
You will get error after error because Yosemite cannot find the server..

SCVMM sp1 snapshot error

Similar Messages

Maybe you are looking for