SCWM/MFS086

Hallo,
I have a problem with EWM-MFS. Every time when I start the communication channel in the warehouse management monitor, I get the following error message:
Internal error occurred in communication layer of PLC SPS
Message no. /SCWM/MFS086
Does anybody have an idea?
Thanks in advance!
Regards,
Bahit A.

Hi Rajesh,
thanks for the fast responce.
Well I did some changes meanwhile:
I made this range internal:
And I also did assign number range to packaging material type:
But nevertheless I get the same warning:
With this result:
But not with the number I've uploaded.
BR
Denis

Similar Messages

REG: Creation of Warehouse product using transaction /SCWM/MAT1

Hi,
My requirement is to create Warehouse Products using Transaction /SCWM/MAT1 , I am using BAPI_PRDSRVAPS_SAVEMULTI2 , but I cound't able to process this because I did find Warehouse number in this BAPI, Am I using correct BAPI, if that is the case let me know the BAPI for warehouse product data,
Thanks
RK

Hi,
There is no specific list, it depends completely on the condition types that have been configured in your system.
The answer you were given was a good one and gave you as much detail as you could expect.
If you are having a particular problem or issue then let us know and we will do all that we can to help.
The easiest way to find out the "list" is to simply click on the "possible entries" tab at the right of the field. !!!!!!!!!!!
Steve B

/SCWM/ISU - FM ARCHIVFILE_CLIENT_TO_SERVER adds terminator to .csv file rows

Dear Community,
On a customer installation i'm facing problems in uploading a file with the FM ARCHIVFILE_CLIENT_TO_SERVER.
The pourpose is to use that file in transaction /SCWM/ISU to upload stock.
The file is a simple .CSV but when I execute the upload and verify the result in AL11 the file has been modified adding terminators at the end of each row:
That character cause a dump when I try to use that file for CONVT_NO_NUMBER in transaction /SCWM/ISU.
There is another way to upload a .csv without that "side effect" ?
thanks in advance, kind regards
Giuliano.

DATA:W_FILEPATH TYPE SAPB-SAPPFAD,
     W_SPATH TYPE SAPB-SAPPFAD.
W_SPATH = '
pclis02\consult\Equipa_EM\Line_TEXT.csv'.
W_FILEPATH = '
debtdc00\sapmnt\trans_DEB\LINE '.
          CALL FUNCTION 'ARCHIVFILE_CLIENT_TO_SERVER'
            EXPORTING
              PATH            = W_SPATH
             TARGETPATH       = W_FILEPATH
           EXCEPTIONS
             ERROR_FILE       = 1
             OTHERS           = 2

How the data is coming to table /scwm/lagps in EWM

Hi All,
Does anybody know how[/from which tcode in customizing] data is coming in to table /scwm/lagps.

I have the same problem and solved
thanks
Edited by: jun hu on Jun 17, 2011 7:44 AM

Add new custom file to EWM product master (/SCWM/MAT1 Tcode)

Hi all
I am using Extended Warehouse Management (EWM 7.0) system with backend SAP ERP.
Now I have a requirement where new fields (Validity period in Days ) needs to be added in product master(/SCWM/MAT1) under Storage or warehouse data tab. I would like to know Is there any BADI available to add custom field to product master ?
It is manually maintenance in EWM, It is not coming through regular CIF.
Looking fwd your comments

Thanks for reply, ERP IMG configuration to Generate addional material master fields which is not going to solve my problem, becuase I want that field only at EWM, It is not going to come from ERP and more precise it is not going to come through CIF,
If I use this then it need to maintain from ERP and standard/custom CIF will push that data from ERP to EWM. I am looking standard alone field addition to EWM product master and want to maintain only in EWM product master screen.
Is there any options to add custom tab in product master and add custom field and it can maintain only in EWM level.
Thanks in Advance
Edited by: bnsubn on Dec 21, 2011 5:20 PM

Difference between material(/SAPAPO/MAT1) & material(/SCWM/MAT1)

Hi Experts,
I am new to EWM & I am confuse between Product(/SAPAPO/MAT1)
& Product(/SCWM/MAT1) ?.
Please anyone outline me some brief about above to product in EWM.
Regards,
Rock

Hi Rock,
In order for the Product to be relevant for the EWM system you need to maintain only the /SCWM/MAT1 - Maintain Warehouse Product transaction. There you will find the screen tabs that are relevant only for EWM. All the tabs that have the little hat came automatically from the CIF from the ECC system and all those that do not have the hat are the ones strictly relevant for the EWM system so these are the only ones that you need to maintain.
As I mentioned earlier, the /SAPAPO/MAT1 - Maintain Product transaction is for APO and does not make a product relevant for the EWM Warehouse.
All the best,
Claudiu Maxim

Tcode: /SCWM/VEH --Finding screen exits/enhancements in eWM

Hello All,
I need to add a dropdown or F4 help button on a custom screen in transactoin /SCWM/VEH related to SCM eWM. I did not finf any screen exits for this transactoins. Please suggest is there any way in acheiving this?
Also can anybody explain how to achieve Batch to Batch transfer posting technically in eWM.
Please suggest me where can i found good tech document related to eWM.
Thanks In Advance.
Anil
Edited by: anil007 on Nov 11, 2009 10:13 AM

Hi,
Check these:
MGA00001 - Material Master (Industry): Checks
and Enhancements
MGA00002 - Material Master (Industry): Number
Assignment
MGA00003 - Material Master (Industry and
Retail): Number Display
Check with 'BADI_MATERIAL_REF'
Refer
http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm
https://forums.sdn.sap.com/click.jspa?searchID=7217830&messageID=3313524
Regards

Screen exit for transactoin /SCWM/VEH related to SCM eWM

Hello All,
I need to add a dropdown or F4 help button on a custom screen in transactoin /SCWM/VEH related to SCM eWM. I did not finf any screen exits for this transactoins. Please suggest is there any way in acheiving this?
Also can anybody explain how to achieve Batch to Batch transfer posting technically in eWM.
Please suggest me where can i found good tech document related to eWM.
Thanks In Advance.
Anil

Did you find any solutions for adding fields to /SCWM/MAT1? I did't find any suitable screen exit or BADI to add fields to product master,
if you find any solution for adding fields to product master, Please post that information in that thread
Thanks in advance

[EWM]-[BADI] /SCWM/ES_CORE_CONS (Define Consolidation Group)

Hi Experts,
I have implemented the BADI: /SCWM/ES_CORE_CONS and done some code incuding a break-point to modify the "Consolidation Group" in the module EWM but when I performed the flow transactions my BADI is not called (no Break Point raised).
Have you got some idea, please?
Best regards.
Rachid.

Hi Suddesh Soni,
Yes, I have done that but the Badi is never called. In fact, I have 2 systems communicating:
ECC ==> EWM (Add-on).
When I end up the flow transactions, the ECC sends the data to the EWM (module) for updating data.
And the documentation specify that the BADI should be called to perform my need.
But the BADI is never called through CL_EXITHANDLER-GET INSTANCE( ).
Maybe not activated ?

Need any Enhancement Or BADI of transaction /N/SCWM/PRDI in EWM system

Hi Team
Is there any Enhancement or BADI's available before warehouse task creation through Transaction /N/SCWM/PRDI in EWM system.
Once got to transaction /N/SCWM/PRDI and entered the inbound ERP and execute it. Then select the line and go to Menu bar select the Inbound Delivery > Follow-on Function> Warehouse Task.
Then select the item and Clicked on CREATE+SAVE OR SAVE button then find out the Enhancement OR BADI's where we have to do some validation on Delivery items before creation of warehouse creation.
Thanks in Advance!!
Abhishek.

Hi,
Goto transaction SPRO (customizing)
select: Extended warehouse management=>Business Addins=>Cross-Process Settings=>Warehouse task.
In this topic you can find enchancements you could use.
Cheers,
Koen.

Required Enhancements OR BADI's on /N/SCWM/PRDI EWM system

Hi Team
Is there any Enhancement or BADI's available before warehouse task creation through Transaction /N/SCWM/PRDI in EWM system.
Once got to transaction /N/SCWM/PRDI and entered the inbound ERP and execute it. Then select the line and go to Menu bar select the Inbound Delivery > Follow-on Function> Warehouse Task.
Then select the item and Clicked on CREATE+SAVE OR SAVE button then find out the Enhancement OR BADI's where we have to do some validation on Delivery items before creation of warehouse creation.
Thanks in Advance!!
Abhishek.

Hi,
Goto transaction SPRO (customizing)
select: Extended warehouse management=>Business Addins=>Cross-Process Settings=>Warehouse task.
In this topic you can find enchancements you could use.
Cheers,
Koen.

EWM Screen Exit for /SCWM/MAT1

Dear Experts,
I need to add additional field to material master data on EWM/SCM box in transaction /SCWM/MAT1. Does anyone know what is the Enhancement for that or may be this is something new in SAP world?
I've tried a program which finds enhancement for given transaction code and the ansver was "No Enhancement found", however when I've checked screen layout for screen 3000, function group /SAPAPO/MAT_MASTER, I found subscreen SA_MATLWH_CI where the frame was described as "Enhancement_Fields" which is not seen on the transaction now.
Any Ideas ?
Best Regards,
Tomasz

Did you find any solutions for adding fields to /SCWM/MAT1? I did't find any suitable screen exit or BADI to add fields to product master,
if you find any solution for adding fields to product master, Please post that information in that thread
Thanks in advance

Material 18pos vs Material_External 40pos - /SCWM/OUTB_DLV_SAVEREPLICA

Hello Experts.
Currently I am facing an issue with EWM 7.01. The main issue is when I am creating the Outbound delivery Requet with function module /SCWM/OUTB_DLV_SAVEREPLICA and the field ITEM_DATA-MATERIAL is not supporting materials with more than 18 positions, so for this reason we are using the field ITEM_DATA-MATERIAL_EXTERNAL instead of field MATERIAL. So I have the following scenarios.
When the function module use:
1) The field MATERIAL_EXTERNAL has a material number with more than 18pos and the field MATERIAL is in blank==> Result: the Oubbound delivery Request (ODR) is created but the fields in the document have
    a) PRODUCT = In blank
    b) PRODUCT EXTERNAL = "&IO        1"
2) The field MATERIAL_EXTERNAL has a material number with more than 18pos and the field MATERIAL has the material number with 18pos==> the Oubbound delivery Request (ODR) is created but the fields in the document are filled but the field PRODUCT is trunked.
    a) PRODUCT = more than 18pos
    b) PRODUCT EXTERNAL = "&IO        just 18pos.
at the end the ODR is created but it has inactive status and I can not create the next document (ODO).
Please help me, any idea is welcome.
Best Regards.
Victor Calderón.

Hi Madhu.
if you work in ECC or ERP/3 you are correct there the lenght of the material has 18pos, but if you work on SCM (EWM or SPP) there the product has 40pos.
In this case the EWM is connected with a legacy system which support 40pos.
Best Regards.
Victor Calderón.

Planned Replenishment with Message no. /SCWM/REPL008

Hi experts
I can run Planned Replenishment with the old material and system can created the warehouse task. but for the new product created today, after excuted the REPL program and it shows the related replenishment quantities, but when click "perform replenishment" system alway says "Replenishment run started in whse no. W202 with replenishment strategy Planned Replenishment. Message no. /SCWM/REPL008". I have compared the product parameters and they are same, some backgroud as below:
1, I use the consign stock for vendor,
2, have assigned the fix bins to the new material.
please advise.
Leo

I have get the answer from SAP, notes 1784164 can solve this problem.
the Symptom is "If stock determination is active for such a batch product and no batch is specified in the delivery, the system may not find any stocks even though stocks do exist"

Regarding Class /scwm/cl_wm_packing

Hi All,
I am facing an issue while using class /scwm/cl_wm_packing. Method: "get_hu_ident" for uploading batchid's of already created HU's in EWM SAP system. I am getting sy-subrc = 1. Please Answer me <removed by moderator>.
Thanks and Regards,
Kirti Bansal
Message was edited by: Manish Kumar

Hi Glen,
yes it is a standard class.

SCWM/MFS086

Similar Messages

Maybe you are looking for