SCXI-1001 will not test properly

I have a SCXI-1001 chassis with two SCXI-1102 modules on board. I have one in slot 1 and one in slot 12. I have the chassis cabled to a DAQCard-AI-16E-4 PCMCIA card on a Dell laptop. Whenever I look at the PC Card Manager, it shows that the DAQCard is working correctly. In MAX, the DAQCard passes the "test resources" test, as well. Whenever I insert my chassis and select auto-detect modules, it finds the two SCXI-1102 modules. When MAX asks me to identify the controlling module, I choose the module in slot 1, which should be correct. The chassis and modules appear in MAX, but when I try to run the device test on the chassis, MAX says, "Unable to test chassis at this time." When I look at the properties of the m
odule in slot 1, the "Connected To" field shows "None". If I select the card and choose "Apply", then "OK". The slot is still not connected to the card. When I go in to slot 1 properties again, the "Connected To" field still shows "None". MAX will not let me select a module to control the chassis.
I have made sure the chassis is on and connected to the card (obviously, since the auto-detect worked). I have traded out all of the hardware, and restarted. I have tried about everything to no avail. Hopefully someone can shed some light here.
Thanks,
James Dean
Lockheed Martin

The "Connected To" property shouldn't be disappering. I would make sure I was using the most updated NI-DAQ version. Since you have tried some different hardware, it may be a software issue. Also make sure you are not only selecting the DAQCard for the Connected To field, but also check the box below it to indicate that the module will control the chassis.
With SCXI systems, there are several hardware components to consider. You might try switching cables (check for bent pins) or cabling to the other 1102 module instead. You can also try different SCXI slots or a different SCXI chassis all together.

Similar Messages

I use several avatar forums that have timed features, when I click on them they act as though they have been double clicked or will not display properly.

When visiting Roliana the Your Posts and Bookmark sections are suppose to load a list of my previous posts or bookmarks, this section is designed to have a cool down period between clicks. Even if it is the first time in a 24 hour window that I click on the link it acts as though I have double clicked or attempted to access it too quickly.
On another site NeuroGalaxy the games will not work properly, they too act as though I have attempted to access them even though it is the first time in a 24 hour window.
The last site Kingdom of Knuffle is having an event where one has to click the answer to quiz, it too can only be accessed once a day and when I click on the answer it redirects me as though I have tried to access it multiple times.
I have attempted to use these functions on other browsers and they work fine, the only thread of similarity between the issues is Firefox and that they are all timed applications in some manner.
There are no errors to report or other oddities going on, the sites otherwise display and operate properly.

Reload web page(s) and bypass the cache to reset animated GIFs.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

My itunes match will not sync properly

Mac User same thing
Hello there here is my problem. My itunes match will not sync properly. It shows a lot of songs over 100 with the icloud match status as "Waiting"
Here is what i have done
1. Reinstall the entire OS delete everything and start from scratch
2. Turn on and off itunes match.
3. Hold down the option key
4. Move my music out of the music folder clear everything out of my itunes and bing back my music.
5. Use backup copies of my music in case the music files had been corrupted.
6. Checked numerious mac community forms that report simular issues.
7. Tried another macbook pro that I have
8. My wifes account which has about 8000 songs did no have the issue. My account seems to have the issue sobeservices2. I beleive this to be account specific. My account has 11481 songs and about 100 to 100 show with the status of "waiting"
9. I get no error messages
10. I've tried multiple ISP - COMCAST - FIOS - I even tried multiple computers
11. Redid the entire os
12. My account has problems "*****s2" but my wife account does not
13. Replicated the issue on more then one computer it seems only has problems with my itunes account. Suck waiting to upload
and its not always the same songs sometimes it's different songs that it gets suck waiting to upload.
14. Removed the waiting songs and attempted again
15. Started with fresh iTunes had the server match a blank itunes folder to the point where it said "0 Songs Match" then re-added them
16. Called Apple Care and spoke with a Senior Advisor who told me he would have to escalate a ticket and he to thought I had done all the tsing possible and that it was up to the engineers to figure out a solution.
I have been working on this for about 4 weeks now. All my trouble shooting has pointed it to be an account specific issue.
Any advise from the community

Hi
I have had a similar set of issues. 8000 songs, 800 in waiting. All ripped from CD into Apple Lossless - mainly classical so most didn't match directly.
First I ripped all these 8000 songs for my father first on his laptop from his CD collection. Eventually got them all matched or uploaded to his Match account (except one) by the usual tricks people suggest (e.g. recoding as AIFF or MP3 etc, deleting, re-adding blah blah). Though of course I shouldn't really have to waste my time doing this. One song absolutely refused to upload. Tried everything - including buying a pristine downloadable version off the publisher's website. Still resolutely refuses to upload.
Anyway - main problem is now with my PC. I copied all these 8000 tracks over. Re-installed everything etc. 800 remain in "waiting" (even though they uploaded Ok on a different account). When I rip my own CDs even some common stuff (e.g. Bowie/Stones) gets uploaded instead or matched and often with one or two tracks stuck in 'waiting'.
If I then look at my IPad (with Match enabled), it will show these waiting tracks as if they were already downloaded to it (which of course they are not). If I try and play one of them it just skips over it.

My iPod Touch 5th Generation will not sync properly

I plug on my iPod Touch like normal and its backs up all the files, but every time I try to "sync" it, it will not sync properly. I added a few songs (not boughten off of iTunes) and they will not sync on my iPod. My iTunes is up to date and so is my iPod Touch. What is going on?

Try this previous discussion:
"Waiting for changes to be applied": Apple Support Communities

Help! I have an iMac 24" OSX version 10.6.8 my iphoto is having problems. It will not open properly. All I get is the little wheel going around and around. My iphoto is iphoto'11 version 9.2.3(629.52) What should I do to make it work properly?

Help! I have an iMac 24" OSX version 10.6.8. My iphoto is having problems. It will not open properly. All I get is the little wheel going around and around. My iphoto is: iphoto'11 version 9.2.3(629.52). What do I need to do to remedy this? I recently installed InstallMac. I don't want this on my computer. I don't know how to get it off. I'm afraid that is what scrogged my iphoto. Can anyone tell me how to correct this situation?

Re: iPhoto:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

ITunes 11.1.4 will not install properly - windows 8.1, 64 bit. My only way to recover is to restore my system. iTunes 11.1.3.8 functions properly. When will Apply provide a workable update?

iTunes 11.1.4 will not install properly - windows 8.1, 64 bit. The only way I have found to recover is to restore my system. I have unistalled/reintalled iTunes two times. No success. iTunes 11.1.3.8 functions properly (following system restore). When is Apply expected to provide a workable update?

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1657 I downloaded a film for rental from itunes and it will not play properly,why?

I rented a film last evening The book of Kells and it will not play properly. My computer has more than enough memory or whatever it needs and I am using an account I have used in the past with success. The films starts, then stops, then speeds ahead like it is not successfully loaded. Any suggestions?

Welcome to the Apple Community.
Where did you download it to and is it a purchase or rental.

My Iphone will not charge properly!!!

I have had my iphone since last november 2012 and it has worked perfectly. However about a month ago when i plugged the lightning cable from the wall into my iphone to charge, i had to bend it into a certain position to get the phone to charge. I figured it was the charger that was busted as at the top of the cable some of the plastic had come away and there was exposed wires, so i purchased another lightning cable from apple, which arrived today. After plugging the new charger into the USB and the wall, the phone will not charge properly again unless the cable is bent into a position where it suddenly starts charging and then unless its kept in that position it will cease to charge. Is this my phone or have i just got unlucky and been sent a faulty charger?? please help.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
Please be more specific about "it wont connect back to the computer" so that appropriate troubleshooting steps can be provided.

Page will not display properly with inline Frames

I have a html page that will not display properly in Dreamweaver. I have a basic understanding of html and want to be able to edit a website in Dreamweaver that was given to me. It looks fine in a browser, but in Dreamweaver some of the content is missing and displays the following message, "Your browser does not support inline frames or is currently configured not to display inline Frames". I was able to open it without any problems using Microsoft Front Page, so is it possible to view and edit it in Dreamweaver?

Without seeing your page, I'm guessing that your page contains server-side includes, iframes and scripts to other files on the server that populate page with content on the server's end. You can't see it in DW because you don't have all the files in your DW local site folder. You said this views fine in FP. Was your page created in FP with FP proprietary tools?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Fonts Will Not Display Properly In Mail

Messages that I am receving in Mail will not display properly. All characters are represented with square with the letter A. I attached a screen shot.
I changed the default fonts to many different options and nothing has worked.
Any help would be great.

Open up Font Book and validate your fonts. You may have a corrupt font or corrupt font database.

My mum has an iPad 1, the email programme will not open properly. If you click on the icon it opens only for a few seconds but then shuts. In that few seconds you cant select anything that you see on screen. Any ideas? Thanks

My mum has an iPad 1, the email programme will not open properly. If you click on the icon it opens only for a few seconds but then shuts. In that few seconds you cant select anything that you see on screen. Any ideas? Thanks

If the Reset Ian mentioned doesn't work...
Shut down and restart the Mail app...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete the Mail app from this list.
- Press the home button twice when done.
- Restart the Mail app

QuickTime 7.55.90.70 will not launch properly

iTunes 8.0.1.11 / QuickTime 7.55.90.70
Dell Dimension 4600, Intel Pentium 4 at 2.8 GHz w/1MB cache, 1024MB DDR SDRAM at 333MHz, Integrated Intel Extreme Graphics 2
Windows XP Home Edition Version 5.1, Service Pack 3
I've been successfully running iTunes and QuickTime on this system for over a year. I often use QuickTime to watch iTunes Store-purchased videos when I'm offline.
The problem started yesterday evening.
When I launch QuickTime, the window flashes open for a split-second and closes. The program button still appears in the toolbar; however, everything but Move, Mininize and Close are greyed out.
I tried the following fixes. All have failed.
1. Ran Windows System Restore to point before problem occurred.
2. Ran Repair QuickTime from Start Menu / Programs.
3. Uninstalled QuickTime from Start Menu / Programs.
4. Downloaded QuickTime from Apple website and installed. QuickTime would still not run and iTunes stopped working, with error message that QuickTime was missing.
5. Uninstalled iTunes and QuickTime from Control Panel.
6. Downloaded QuickTime + iTunes from Apple website and reinstalled.
7. Deleted all QuickTime preferences files (I found four).
8. Re-entered registration number for QuickTime. (I upgraded to QuickTime Pro earlier this year.)
iTunes is now working normally but QuickTime still will not launch properly.
It's possible that yesterday I launched iTunes while QuickTime was running; it's the only thing I can think of that might have created this problem.
Thanks in advance for your help.
Message was edited by: pipermaru
Message was edited by: pipermaru
Message was edited by: pipermaru

It sounds as if you have more of a problem than I did. I'm not an expert and I'm hesitant to make suggestions that might make the problem worse.
In the meantime, I do recommend that you back up all of your iTunes music before you do anything else, and get into the habit of backing up on a regular basis.
Then you might want to try this: completely uninstall both iTunes and QuickTime (using Revo, unless you know how to clean up the registry on your own). Then reinstall both programs (available at the link I posted earlier) and see if that takes care of the problem.
If this doesn't work, I suggest you start your own thread describing the problem and asking for help. Hopefully an Apple rep -- or at least someone more experienced than I am -- can help you.
Sorry I can't be more useful, and good luck.

Ipod touch will not scroll properly

My ipod touch will not scroll properly and when I try to click on something it does not open the thing I wanted it to. Is there any way for me to fix this? It's a 4th gen.

First, you may have the accessibility VoiceOver feature or another one turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn them off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)
Next try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

ITunes Store will not load properly and returns too homepage in seconds

iTunes Store will not load properly and returns too homepage in seconds what do I do too fix it

I am having the same problem now, did you ever find a way to fix it?

Gimp will not run properly

I just purchased a 24 inch Imac and Gimp will not run properly. I have the latest system updates and firmware. Gimp starts X11 and appears to load, but the only item visible is the Gimp menu, none of the tools. It shows as running in the dock.
If I try to open a graphic with Gimp, it loads but the graphic is not visible and only the Gimp menu is visible in the menu bar. It shows up as running in the dock.
It works fine on a G4 quicksilver. I have the latest version 2.2.11
Thanks,
Fran
IMAG INTEL Mac OS X (10.4)

Hello Francis,
Did Gimp ever load properly? On first load, it should have gone through an installer within X11. Also, I've noticed that my image windows start up hidden. There also may be a bug in which clicking on the Gimp app icon in the dock itself won't bring the windows forward, so you have to use the X11 icon instead. Try using Expose to show all windows in all applications to see if they've opened but sort of "off-screen."
It could be a bad installation, or it could be that somehow the toolbars and palettes, etc. in Gimp just never appeared. Check to make sure X11 is up to date as well. I'm currently running 1.1.3 with XFree86 4.4.0.

SCXI-1001 will not test properly

Similar Messages

Maybe you are looking for