Scxi 1112 can not acquire correct data at high temperature(higher than 700C)

A scxi-1112 module in scxi-1001 chassis is used to acquire oven Temperature. Software is LabView 8.5. when oven is ramping higher than 700C, the module gets wrong data, the data acquisition VI shows random values around 700C.It seems the scxi-1112 module "reaches" its maximum setting, which actually is 1000C. Can Anybody explain what's happening to me? Thanks.

Hi gq,
Could you please provide a screenshot of the
way you are configuring the task, as well as what the data looks like
that you are seeing when it behaves incorrectly? If you just perform a
voltage reading (instead of a temperature task), what values are
returned, and does it show the same behavior of reaching a certain
voltage and not ramping any higher? Also, how do you have your
thermocouple attached to your oven; is there any possibility that the
connection is conducting at that temperature? Also, regarding the use of different measurements in the task, are you using different modules in your system or are the measurements being done on the same 1112 module? Additionally, have you tried other channels and received the same problem? I look forward to reading your response.
Regards, 
Daniel S.
National Instruments

Similar Messages

  • Strange scenario,Oracle can not display the data in mysql correctly

    I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
    -------mysql------------
    mysql> create table tst(id int,name varchar(10));
    Query OK, 0 rows affected (0.00 sec)
    mysql> insert into tst values(1,'a');
    Query OK, 1 row affected (0.00 sec)
    mysql> select * from tst;
    ------------+
    | id | name |
    ------------+
    | 1 | a |
    ------------+
    1 row in set (0.00 sec)
    mysql> show create table tst\G
    *************************** 1. row ***************************
    Table: tst
    Create Table: CREATE TABLE `tst` (
    `id` int(11) DEFAULT NULL,
    `name` varchar(10) DEFAULT NULL
    ) ENGINE=MyISAM DEFAULT CHARSET=utf8
    1 row in set (0.00 sec)
    -------------oracle ------------------
    SQL> select count(*) from "tst"@mysql;
    COUNT(*)
    49
    SQL> select * from "tst"@mysql;
    id
    1
    SQL> desc "tst"@mysql;
    Name Null? Type
    id NUMBER(10)

    You can make the following query on the result page:
    "select * from the_table where movietitle = ? and cinema = ?"
    then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
    Below is the sample code, it assumes you have a connection to the database:
    PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
    stat.setString(1, usersMovieTitleSelection);
    stat.setString(2, usersCinemaSelection);
    ResultSet res = stat.executeQuery();
    if (res.next()) {
    out.print("The movie is available");
    } else {
    out.print("The movie is not available");
    }Now just add that to your JSP page. Enjoy ! =)

  • Date can not display correctly in excel from .jsp

    Hi,
    I create a .jsp report to export the data to excel. the report run OK, except the date field can not display correctly.
    for example in database :start date ='01-oct-2003'
    in the except it displays to 02/06/02.
    It seem all the date field can not be control in the report, and control by somthing else
    Doese anyone come accross this problem?
    Thanks

    Hi Rong,
    Are you using the following demonstration to build your JSP?
    http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
    (Output to Excel with Oracle9i Report)
    I tried to do the same, and inserted a database date field in the JSP using Reports. I found the following:
    While making the template inside Excel, if I make sure that the format of the date cells is "Date" - some particular date format, the date field values from Reports does not get exported correctly.
    However, if you make sure that inside the template, the format of the date cells is not date, but "General", then the date field values are correctly exported to Excel.
    Pl try it and let us know.
    Navneet.

  • Why the 2LIS_08TRTK extractor can not get  all data

    Hello, BW Gurus.
    Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.

    Is it because
    <i>
    Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
    This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.
    </i>
    - from oss note 573470.

  • How can I acquire the data from 3 separate Channels of SCXI1300 simultaneously?

    I am trying to build a DAQ system, which can collect the data coming from 3 different channels. I am using the SCXI 1300 board, Labview 8.0. I used 3 separate DAQ Assistant module to build the system, but it can not collect the data from the 3 channels simultaneously, it can only collect the data from one channel by another channel. So I am wondering how could I fix this problem or rebuild my system.  Thanks

    Hi, Dennis
    I tried to use the NI-DAQmx to replace the DAQ Assistant to do the 3-channel data acquisition simultaneously, and I did the signal splition as you told me. The program works fine for 1-channel data collection, but if I chose 3 channels to do the data acquisition simultaneously, the program could not wokr, and  a warning window  kept poping up, and the window tells me the maximum sampling frequency is 0.952. So I am wondering what is going wrong and how to fix it.
    The attached files are the code and the screen shot of the warning window, please check them.
    Thanks
    Jingrui
    Attachments:
    NI-DAQmx program.vi ‏165 KB
    Warning Window.jpg ‏2305 KB

  • TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data.  I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

    I found this  (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data.  I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder. 

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

  • Webi does not pick correct Data

    Hi Guys,
    I have a webi. The Universe for the Webi is based on  Bex Query. I see correct Data in Bex Query but when I create a webi report it does not pick correct data.
    I have checked following points already:-
    1] No Resstriction at Query Level
    2] No restriction at Universe Level
    3] No Filters/ Restriction at Webi Level.
    Can anyone suggest whats happening?
    Regards

    Hi Ray,
    It happens sometimes that data gets aggregated over all the dimension objects present in the 'Available Objects' section in webi.
    Try to pull only the characteristics present in the row section of the bex query say 'X' and measure in the column section of bex query say 'Y' into the results pane in the edit query window in webi.Then run the report and check.
    This will give you the idea about aggregation.
    Regards
    Vineeta

  • Can not acquire licence N95 8G

    So I recently bought a N95 8G that has 12 free months access to the music store, most works well, but I have downloaded a 3-4 albums that when I try to transfer from my pc to phone, it comes up with [b]This track could not be transfered as it was not possible to acquire a licence for this purpose[/b]
    Can anyone tell me why it can not acquire a licence for a song I already have?
    Cheers

    The licence should have been downloaded BEFORE the track, perhaps something went wrong in that process - does the track play OK in the PC?
    If this is not the case, and if you have a good data plan or WLAN access, you can download the track straight to the phone - go to the Music menu and select Music store, log into your account using your normal name and password, then go to the Music Vault which shows you the stuff you've already taken and redownload it directly to the phone.

  • Can not insert/update data from table which is created from view

    Hi all
    I'm using Oracle database 11g
    I've created table from view as the following command:
    Create table table_new as select * from View_Old
    I can insert/update data into table_new by command line.
    But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)
    Anybody tell me, what's happend? cause?
    Thankyou
    thiensu
    Edited by: user8248216 on May 5, 2011 8:54 PM
    Edited by: user8248216 on May 5, 2011 8:55 PM

    I can insert/update data into table_new by command line.
    But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)so what is wrong with the GUI tools & why posting to DATABASE forum when that works OK?

  • " Can not interpret the data in file " error while uploading the data in DB

    Dear All ,
    After running the below report I am getting the " Can not interpret the data in file " error.
    Need to upload the data in DB through excel or .txt file.
    Kindly advise to resolve the issue.
    REPORT  ZTEST_4.
    data : it like ZPRINT_LOC occurs 0 with header line,
    FILETABLE type table of FILE_TABLE,
    wa_filetable like line of filetable,
    wa_filename type string,
    rc type i.
    CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
    CHANGING
    FILE_TABLE = filetable
    RC = rc.
    IF SY-SUBRC = 0.
    read table filetable into wa_filetable index 1.
    move wa_filetable-FILENAME to wa_filename.
    Else.
    Write: / 'HI'.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    start-of-selection.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    FILENAME = wa_filename
    FILETYPE = 'ASC'
    HAS_FIELD_SEPARATOR = 'X'
    TABLES
    DATA_TAB = it.
    IF SY-SUBRC = 0.
    Write: / 'HI'.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    insert ZPRINT_LOC from table it.
    if sy-subrc = 0.
    commit work.
    else.
    rollback work.
    endif.
    Regards
    Machindra Patade
    Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

    Dear dedeepya reddy,
    Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
    REPORT  ZTEST_3.
             internal table declaration
    DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
          wa LIKE LINE OF itab,
          wa1 like line of itab.
                       variable  declaration
    DATA: v_excel_string(2000) TYPE c,
           v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv',  " name of the file
            delimiter TYPE c VALUE ' '.         " delimiter with default value space
         read the file from the application server
      OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-subrc NE 0.
    write:/ 'error opening file'.
      ELSE.
        WHILE ( sy-subrc EQ 0 ).
          READ DATASET v_file INTO wa.
          IF NOT wa IS INITIAL.
            append wa TO itab.
          ENDIF.
          CLEAR wa.
        ENDWHILE.
      ENDIF.
    CLOSE DATASET v_file.
    EXEC SQL.
         TRUNCATE TABLE "ZPRINT_LOC"
    ENDEXEC.
    *------display the data from the internal table
    LOOP AT itab into wa1.
    WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
    ENDLOOP.
    insert ZPRINT_LOC from table itab.

  • In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015

    In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015

    Hi DirTech,
    Are both of these dates in the same Excel file? If they're in different files, are you choosing the same language for OCR (optical character recognition)?
    If they are in the same PDF file, how was that PDF file created? Was it created from a third-party application (rather than an Adobe application)? If it was created by a third-party application, it could be that it wasn't written to spec, and that's why you're seeing some oddities in the PDF > Excel conversion.  (See Will Adobe ExportPDF convert both text and form... | Adobe Community.)
    Best,
    Sara

  • Final user's can not see the data due to limited authorization.

    We have created a InfoSet with three info Objects, 0Account, 0Costcenter and 0COMP_CODE. 0Costcenter have an attribute retail location  0RT_LOCATIO.
    0RT_LOCATIO is an authorization relevant object. We as consultants can execute the infoset properly, but final user's with limited authorizations can not see the data because of authorization failier
    We hae several options to solve the issue, deleselect the auth. flag in the infoobject; delete the infoobject from the attributes of the cost center or create an authorization object and assign it to the final user's profile. But we don't want to go that way.
    My question is, is there any way to avoid including this attribute in the infoset definition? We are not using it in the query and we don't need it, so if we could delete it from the infoset (in the same way you add or delete infoobjects from an Infocube) without changing the cost center aster data, we will have our problem solved.
    Does anyone how to do this (if possible)?
    Thanks in advance!

    Just do two things to find the authorization check failed for that user.
    1. Execute SU53 output and find out the authoirzation check failed. If yes, please send that to BASIS Team.
    2. Next one, switch on the authorization trace in ST01 and ask that user to see that data. if the user is failed with authorization issue. switch off the trace in ST01 and find out the issue.
    Do this way, if it is not successful you can go for any other alternate way.
    Hope this would help you.

  • Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    Hello. Most of the engineers in developer exchange are more familiar
    with NI products. Contacting ICS for technical support is a better
    course of action.

  • Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

    Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

    If you just installed iCloud does that mean you updated the iOS that's running on your iPad?  If so, you'll want to restore all the programs you have from the backup you hopefully made.
    Refer to these articles for help.
    iTunes: Backing up, updating, and restoring iOS software.
    If you don't want to use iCloud, simply don't activate it.
    You can also download the programs again.
    If you live in a country that supports re-downloading apps then you can re-download them.  You can refer to this article for more help.
    Downloading past purchases from the App Store and iTunes Store
    What to know if your country supports downloading past purchases?
    iTunes in the Cloud Availability

  • Why in SE16 we can not  see New Data Table for standard DSO

    Hi,
    We says that there is three tables (New Data Table, Active Data Table and Change Log Table) of Standard DSO, Then Why in SE16 we can not  see New Data Table of Standard DSO.
    Regards,
    Sushant

    Hi Sushant,
    It is possible to see the 3 DSO tables data in through SE16. May be you do not have authorization to see data through SE16.
    Sankar Kumar

Maybe you are looking for