SCXI and Aquisition with Windows 7 x64

Our IT just updated our laptops and we received Windows 7 x64.
For data acquisition, we use SCXI hardware in the SCXI-1000DC chassis and a SCXI-1600 USB DAQ Card. In the process of getting my NI hardware configured on the new laptop, I discovered NI does not support Windows 7 x64 for the SCXI-1600. The other options to connect the SCXI-1000 to a laptop are the DAQcard-6062E and the DAQcard-6036E, neither which support Windows 7 x64. According to the information below, there are no plans to support x64.
What are my options to continuing using the hardware we have invested in with the laptop running Windows 7 x64?
Re: scxi and drivers?
[ New ]
04-13-2010 01:09 PM
For those USB devices, there are not currently plans to add support for 64-bit operating systems. This is due to incompatibilities between the USB design of these older devices and the USB implementation in 64-bit version of Windows.
Regards,
Seth B.
Product Support Engineer | Multifunction Data Acquisition | National Instruments
“Engineers like to solve problems. If there are no problems handily available, they will create their own problems.”- Scott Adams
Have some feedback about our products, or can't find a product to suit your needs? Let us know! Visit the Data Acquisition Idea Exchange!.
Solved!
Go to Solution.

You will need the NI SCXI-1349 connector block and the SH68-68-EP cable. The SCXI-1349 plugs in to the back of your SCXI module and the cable connects the 1349 to the USB M Series Mass Termination device. All of the rest of the setup is identical to any PCI/PXI E Series device. The USB M Series device will be the Analog-to-Digital converter for the system instead of the SCXI-1600.
Seth B.
Staff Test Engineer | National Instruments
Certified LabVIEW Developer
Certified TestStand Developer
“Engineers like to solve problems. If there are no problems handily available, they will create their own problems.”- Scott Adams

Similar Messages

Cannot configure and connect to Airport Express Base Station Model A1264 with Windows 7 (x64)

I am not able to connect Airport Express Base Station Model A1264 with Windows 7 (x64). I did a factory reset, uninstalled and reinstalled the AirPort Utility for Windows v. 5.6.1.
My objective is to extend a non-Apple WiFi network with Airport Express Base Station Model A1264 and use it for direct ethernet and/ or wireless connection. Any guidance as to how I can get set up here?

This is very common, we run a mix of mac and various pc brand desktops and laptops, what I have found is that using the windows wireless client rather than manufacturers on some laptops helps, getting the latest wireless drivers from the manufacturer has helped, make sure all your windows updates XP and Vista are current.
If all the above is covered try the different WEP WPA WPA2 variants or even without for test purposes. I have most success with WPA2.
Finally I am assuming your running the latest firmware on the express unit, whilst this hasn't attributed to better connectivity for us I did it regardless.
Message was edited by: Fence Rider

Has anyone gotten DLNA to work properly with Windows 7 x64 ?

Has anyone gotten DLNA to work properly on Windows 7 64 bit and Windows Media Player 12? I got it working, sort of. It's not reliable though, and very slow. It drops the connection a lot, and when I go to engage it it connects about half of the time and half of the time it won't see the Media Server. It also times out when trying to scan my (admittedly large) music directory on my PC.
I'm sure that my hardware is ok, I think that DLNA is just a buggy system. But if anyone has it working properly with Windows 7 x64 and WMP 12 can you tell me exactly how you set it up? And if you used another desktop app besides WMP can you tell me what worked for you?
Thanks!

Try setting it up like this. Hope this helps!
Start Device Manager.
Windows 7 Click Start > Control Panel > System and Security > Device Manager.
The following devices are normally installed:
Anrdoid USB Devices
My HTC
Disk drives
HTC Android Phone USB Device
Modems
HTC Modem (if using as a tethered modem)
Portable Devices
E:/ (Where E represents the assigned drive letter.)
Universal Serial Bus controllers
USB Composite Device
USB Mass Storage Device
If a red X, yellow ! or yellow ? is displayed to the left of a listed device, a conflict is present and the drivers must be updated or reinstalled.
Driver conflicts may also be indicated by a device entry labeled Other Devices or Unknown.
If a conflict is present:
If using the HTC DROID Incredible ADR6300 as a Sync device continue to step 3.
If using the HTC DROID Incredible ADR6300 as a Modem ensure the device drivers are installed. Refer to Downloading and installing VZAccess Manager for additional assistance.
If VZAccess Manager is installed and a driver conflict is still present, continue to step 3.
Right-click the device then click Update Driver Software.
If using Windows 2000 / XP, right-click the device then click Update Driver.
The device name may differ from the example shown.
Click Browse my computer for driver software.
If using Windows 2000 / XP, select Install from a list or specific location (Advanced) then click Next.
Enter C:\Windows\System64\driver into the search window then click Next.
The driver location can be entered manually or navigated to by clicking Browse.
If the driver software is not found, a Windows Operating System update may be needed.
Click Close.

ThinkPad W530 with Windows 8 x64 Pro BSOD when connecting to projector

Nine, that only covers Widows 7. Many people in this thread have reported the problem using Windows 8. Has that been addressed by Lenovo yet? Stability problems like this should NEVER be allowed to go so long without a resolution.
Edit Note : This thread was created base from the previous thread "ThinkPad W530 with Windows 7 x64 Pro BSOD when connecting to projector. As we currently Cx reporting facing the same issue on Win8 I have seperated this thread in order not toconfuse other customer. For cutomers facing this issue please continue posting in this thread.

Hi shan_mcarthur,
Thanks for posting. I read through this thread again and noticed that most of customers here do indeed have Windows 7 installed as what the title represented unless I'm mistaken or may have missed out are you or anyone else here facing the same issue on Windows 8. If that is the case I'll be more than happy to bring this up with the teams but it will have to be a new thread though as I'd like to keep the resolution separate based on the OS use just to not confuse other customer .
For those facing the same issue above on Win8, please do let me know so we can start a discussion around this.
Do let me know.
Regards

When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."

When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."

Hi,
Please also check Event Viewer if it identify this problem.
In addition, also check Device Manager, if similar driver already installed, try to uninstall them and reinstall new driver again for test.
Roger Lu
TechNet Community Support

Which version packages do I need for T530 with Windows 7 x64?

- Power Management Driver:
This version http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032258
Or this version http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014939
- Intel Management Engine Firmware:
This version http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028929
Or this version http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032435
The reason I'm asking is because Lenovo Support Driver & Software website lists all these versions for T530 with Windows 7 x64.

usually i go for the newer version.
and on my thinkpad i installed power management driver version 1.66
and for ime firmware the second link you provided.
good luck

All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

Are the songs playing whole in iTunes? if not download them again.
else read this Apple Support Article on your problem
Have a nice day!

I have two pc, one with windows 7 professional and another with windows 8.1. I'm the only owner and user of both. One works with 32 bits and the other (windows 8.1) , 64 bits. Can I use acrobat standard XI in both pc's being the only usuary?

Just in case. I have two pc's one with windows 7 professional (32 bits) and another with windows 8.1 (64 bits). Can I use, with one license, as I'm the owner and only user, acrobat standard XI?. Thank you in advance
Francisco

Yes, the license allows 2 installs for the owner's personal use. You can check this in the license agreement if you wish.

I have the iphone 4 and PC with Windows Vista Basic. When I bought my iPhone syncs with iTunes on my computer, but now when I try to sync it tells me that Mobile Device Service was closed and I can not synchronize the phone. Try restarting Mobile Device S

I have the iphone 4 and PC with Windows Vista Basic. When I bought my iPhone syncs with iTunes on my computer, but now when I try to sync it tells me that Mobile Device Service was closed and I can not synchronize the phone. Try restarting Mobile Device Service and uninstall and reinstall Itunes but still giving me the same error.

http://support.apple.com/kb/HT3965

I have mountain lion OSX and parallels with Windows. Every time I click on a hyperlink in other applications it opens - some 7 Zip file explorer inside Parallels but doesn't go to Safari. Does anyone know solution?

I have mountain lion OSX and parallels with Windows. Every time I click on a hyperlink in other applications it opens - some 7 Zip file explorer inside Parallels but doesn't go to Safari. Does anyone know solution?

I suggest that you run software update, after which you should have Safari 6.0.5 - then check Safari - Preferences - Privacy & see that 'Block cookies' is not set to Always.
Failing that - switch Safari extensions Off via Safari - Preferences - Extensions & test again

Lost my Iphone and labtop with Windows 7. Got new Iphone and PC, but can only find old purchased music in Purchase History via Itunes on pc, but not get it sync to new Iphone.

Got new Iphone and labtop with Windows 7.
Now can only find the old purchased music via old phone in Purchase History.
How can I get the purchased files into Music list in Itunes, in order to sync with new Iphone ?

Go to the iTunes app on your iPhone. On the bottom tap Purchased. Once that loads, choose the Artist you just downloaded, then the album, then click the cloud icon. This will download the music to your iPhone and will not charge you for it.

Can I run the Photoshop CC and Lightroom with Windows XP professional as the operating system?

Can I run the Photoshop CC and Lightroom with Windows XP professional as the operating system?

The tech specs for Phtoshop CC and Lightroom indicate Windows 7 with SP 1 is required as a minimum, so XP would not be sufficient to run them. Here's the Photoshop specs:
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor (2GHz or faster)
Windows 7 with Service Pack 1, Windows 8, or Windows 8.1*
1GB of RAM
2.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
1024x768 display (1280x800 recommended) with OpenGL® 2.0, 16-bit color, and 512MB of VRAM (1GB recommended)†
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.‡

Drivers for the Macbook 13 a1278 with windows 7 x64

hello. where you can find the drivers for the Macbook 13 a1278 with windows 7 x64? boot camp gave me the drivers for x32.
PS google translator

You can download the drivers before you install windows, or download it from Apple support!
here is a link:
http://support.apple.com/downloads/#download%20bootcamp%20windows%207
hope it helps you!

Using NI-IMAQ imgSnap (ANSI C) with Windows 7 x64

Hello,
I am trying to perform some basic image acquisition using ANSI C calls to NI-IMAQ (as distributed by the November 2009 release of NI Vision). I am developing on Windows 7 x64.
Setup seems to work fine, but when I make the following call:
void* theTempBuffer = NULL; Int32 theRetVal = imgSnap(mSession, &theTempBuffer);
I get the following error:
This 32-bit device is operating on a 64-bit OS with more than 3GB of physical memory. This configuration could allocate 64-bit memory which is unsupported by the device. To solve this problem, reduce the amount of physical memory in the system.
I see this whether I compile to a 32-bit or 64-bit target. I would have concluded that the PCI-1422 simply isn't supported under Windows 7 x64, but the card (and attached camera) work fine for snapping or grabbing images when I go to the Measurement & Automation Explorer.
Thanks for your help.
Solved!
Go to Solution.

Hi KKRand,
Currently you are using a non-supported combination. Due to the hardware limitations of the 1422 board, it is limited to 32-bit DMA. Due to IMAQ's C API where users have the ability to allocate their own buffers to be acquired into, we have no way to enforce that this memory is below the 32-bit boundary for *all* use cases of our C API.
Because of this, we officially do not support using the IMAQ C API on a board with this 32-bit DMA limitation on a 64-bit system and more than 3GB of memory because we cannot guarantee that a user's application will run without any modifications. These limitations do not apply if you use an API like LabVIEW where the user does not control the memory allocation directly or you have a newer board with 64-bit DMA support.
Measurement & Automation Explorer can get around this limitation because it uses limits its use of our API to ensure that memory is allocated properly to guarantee that it is below the 32-bit boundary if you have an affected board/system combination. With possibly a little modifications to your app, you should be able make it able to work as well, but as I mentioned it is not an officially supported combination.
The modifications to your application are:
- Make all allocations of image buffers that you will use for acquisition from that board be allocated by calling into imgCreateBuffer() as opposed to allocating them by other means (new, malloc, on the stack, etc). Memory allocated in this manner must be released by calling imgDisposeBuffer().
- Disable enforcement of checking this condition by calling a private function exported from imaq.dll as "int niimaquDisable32bitPhysMemLimitEnforcement(SESSION_ID boardid)"
The first part is likely already satisfied in your case because the high-level imgSnap() allocates the memory for you and thus ensures that it meets our requirements. You'd have to add the second to your application. Keep in mind this is unsupported. We currently do not check that all buffers in your bufferlist were allocated in this manner and so if you allocated a buffer by some other means you would get a run-time configuration failure when and if any memory ever fell past the 32-bit boundary when you start acquiring.
This behavior might change in the future, but from a support standpoint it is unlikely that we'd officially support this configuration since it is highly dependent how the user's application is written (if it relies on its own memory allocations). What we wanted to avoid was customers starting with simple usage of our API (like a high-level Snap()) and finding it working but then later going and allocating their own buffers and seeing a failure.
Hope this helps,
Eric

WMP600N - weak connection and low signal - Windows 7 x64

I bought the WMP600N because Linksys and Microsoft listed it as 'compatible' for Windows 7 x64.
My experience:
- unstable and weak connection
- pings to websites like google.com drops, average: 1 out of 3
- low signal, on the same spot my three years old HP-laptop with 'a build in wireless card' has full signal strength in Windows 7
- it works well under Windows XP (32 bit)
I'am convinced that drivers for the WMP600N are not ready for Window 7 x64. Linksys (or Ralink, which developed the chipset), please release a proper driver for the WMP600N!
Message Edited by Storm_dutch on 12-20-2009 09:51 AM
Message Edited by Storm_dutch on 12-20-2009 09:52 AM

I'm not sure about you guys, but I use WMP600N and running Windows 7 64bit without any issues. The driver that I'm using now is Driver Version: 3.0.2.0, Driver Provider: Ralink Techonolgy Corp, Driver Date: 6/19/2009. Here's what I did when I upgrded my wireless adapter. 1. Uninstall the original wireless driver from device manager. 2. Turn off the computer and phisically removed the wireless adapter from my computer. 3. Pop in the new WMP600N and turn on the computer. 4. Windows 7 then automatically detects the new adapter and intall the proper driver for it. Well, that's all I did. The whole process is very simple and straight forward.

SCXI and Aquisition with Windows 7 x64

Similar Messages

Maybe you are looking for