SCXI Device Driver - can not find

Hello NI,
Please drop my last request. We had a PCI device conflict with a CompactFlash PCI card.
Thanks, Larry Scott
====================================================
I just installed Labview followed by NI Device Drivers for Data Acquisition (Measurement and Automation explorer) on a new HP desktop running Windows 2000.
I then installed a NI6024E DAQ card and rebooted the PC. I get a "New Hardware Detected" message. When I select "Search for appropriate driver", no driver is found. I specify to look for the driver in my C:\WINNT\inf directory. Still no driver is found.
Can you please tell me where I can locate the driver for my NI6024E DAQ card ?
Thank you,
Larry Scott
OSRAM Opto Semiconductors
408-456
-4072

Larry,
The NI 6024E is supported by the NI-DAQ driver. NI-DAQ 7.3, the latest version of the driver, is available for download in the following location:
NI-DAQ Version 7.3 for Windows 2000/NT/XP
Spencer S.

Similar Messages

HT3887 I am trying to pair my iphone 4 to my 2011 Kluger KX-R. I have turned bluetooth on my phone but it keeps searching for devices and can not find any. My computer can find my phone but my phone can not find my computer.

I am trying to pair my phone to my 2011 Toyota kluger KX-R. I have turned bluetooth on my phone but it keeps searching for devices and can not find any, including my computer.

No worries. Often after iTunes updates you have to reconnect your device in order for iTunes to see it. Happens to me all the time!

[BootCamp Driver] Can not find the driver 'Netwrok Controller' on iMac 21.5

Dear All,
I installed bootcamp driver on serveral iMac and it worked fine.
Now we got the new iMac 21,5'' and when I run BootCamp 3.0, it install all driver excepted for Network Controller.
If I go to 'Manage' and then 'Device Manager', I can see 'Other Device'->'Netwrok Controller' with yellow interrogation mark.
On iMac 21'' and 24'' the problem does not occur...
On imac 21.5, the network card works fine and I can setup an ipadress, even if I have that interogation mark for the 'Network COntroller'
Some one has an idea where can I fin a suitable driver in order to remove that yellow interrogation makrs?
many thank
Pierrot

Hello, Some on has an idea?
It will help,
tks

Blackberry Device Manager can't find 9320 Bluetooth device (even Bluetooth is switched on and set to Discoverable)

I want to sync my Blackberry 9320 via Bluetooth to a Windows 7 Professional machine using a Bluetooth adapter. Syncing using USB cable works fine.
I can Bluetooth pair with the 9320 and also send / receive files to /from the Windows 7 machine. Fantastic !
HOWEVER, Blackberry Device Manager can not find the 9320 Bluetooth device (even Bluetooth is switched on and set to Discoverable) - see screen shots below.
By the way I have already tried (amongst other things) “Manually Install RIM Virtual Serial Ports in Microsoft® Windows® 7” on http://www.youtube.com/watch?v=gK2n5dHxGHI Unfortunately, this does now work - the drivers do load up OK and remove the warning signs when view in Windows Device Manager, but Blackberry Device Manager still can't see my 9320.
Please help !

I have the exact same problem with my 9360. I have also tried all the fixes I could find on the Internet with no luck. I have posted a request as well. I will let you know if I find a solution. What gets me though is that this appears to be a long standing issue with no obvious fix! Best of luck.

I am trying to authorize a new ipad and can not find authorize in store

I am trying to authorize another device and can not find authorize this computer under Itunes store. Where do I authorize my computer?

breory wrote:
I am trying to authorize another device...
Authorisation only applies to Computers... Not iDevices.
See Here for full details...
About authorization and deauthorization
To Associate an iDevice with your Apple ID... See here...
http://support.apple.com/kb/HT4627

I can not find Apple Mobile Device USB Driver

My itunes can not show iTouch and iPhone
but I can find them on my computer
I follow the
iPod: Appears in Windows but not in iTunes
But I still can not find the
Apple Mobile Device USB Driver is installed

Have you done:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
What results do you get when you run this:
iTunes for Windows: Device Sync Tests
Do both the Home button and Power button work OK normally?

Hi, I purchased itunes match in order to convert the previously purchased songs that reflected copyright and would not copy to other device. Ran itunes match however, I can not find a way to obtain my 62 matched songs to place on hard drive to copy.

Hi, I purchased itunes match in order to convert the previously purchased songs that reflected copyright and would not copy to other device. Ran itunes match however, I can not find a way to obtain my 62 matched songs to place on hard drive to copy.

Donna,
You have to delete the DRM copies from your library first.
See the section "Can I upgrade my previously purchased music to iTunes Plus?" in this guide: iTunes Store: iTunes Plus Frequently Asked Questions (FAQ)

WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.

Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

I have just downloaded Lion and my AverTv Molar will not work, just comes up can not find device can anybody help please

Hi, I have just downloaded Lion, and my AverTV Volar M will not work, just come up can not find device can anybody help please.

Contact the manufacturer's tech support for help. Most likely it needs a compatible driver.

Can not find driver for Thinkpad T500

I can not find driver for Thinkpad T500? Could you please help me?
Moderator edit: Matched Subject to content.

Thanks to the folks at Kepware. I was able to get this working for CompactLogix L32E.
Step 1: In NI OPC Server Create a new Channel. Channel Name can be whatever you want.
Step 2: Device driver will be ControlLogix Ethernet. You can also enable diagnostics if you want.
Step 3: Network adapter. I used default setting.
Step 4: Write only latest values. Duty at 10. ( These are default settings and are recommended.)
Step 5: Finish new Channel setup
Step 6: Click on Icon to create new device
Step 7: Device Name can be whatever you chose.
Step 8: Select Device Model in this case CompactLogix 5300
Step 9: Device ID For me was IP Address XXX.XXX.XXX.XXX,1,0 (Note the 1 directs path to backplane. The 0 to the slot where processor is)
Step 9: Device timing. Leave at defaults.
Step 10: Auto demotion leave unchecked.
Step 11: Leave at defaults Do not generate on startup Delete on create and allow subgroups
Step 12: Port and watchdogs at default settings
Step 13: Project options leave at default. (In my case I changed to short as that is what most of my tags were)
Step 14: Create tagname from device.
Step 14: Finish Device setup.
You now have two options.
Option 1: Start creating tags as you need them. (This is what I did)
Option 2: Right Click newly created device and select properities. Then select database creation and click auto create.
Go To Lookout and create new driver.
Select OPC Client
Server name will be from dropdown menu. National Instruments:NIOPCServers
Click okay
You should be done and smiling.

It says "can not install the driver: could not find media for this driver"

I am havin problem with sound in my Compaq presario V6406TU. When i try to install, it says "can not install the driver: could not find media for this driver", how ever i get a beep for every error message. In my device manager there is no UAA and in services.msc windows audio is started.
I have tried almost everything on net but not able to solve this, plz help.

vendor wrote:
= No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
I think there is not.
Yes My Sound Card is exaclty SB0220. I have downloaded the patch and start it. After that I configured the installer and now I have creative drivers. But are they the best for my sound card? After all I`ve pathed the installer and some sort lied it. If the drivers are for my model, why should I path it's
Yes, I've seen a true SB0220 too on a picture after writing that comment so there is true SB0220 model. But, are you sure your card is SB0220? Did you look the number from a sticker on card board w/ serial number lik MSB022xxxxxxxxxxx where the SB022x is the true model number for your card.
Why you didn't got drivers installed for your card is, because the installer doesn't support the model SB0220 (supported cards are listed in ctcomp.dat -> this is the file ctcomp.exe patches).
IIrc, those drivers are the latest ones for your card. If you like to, you can try soft-mod your card the way, you can use Audigy series drivers (which are a bit newer) -> http://www.tech-pc.co.uk/audigy-2.php (i.e. you just use ctcomp.exe utility to patch the installer for Audigy drivers (use these drivers st - http://www.station-drivers.com/telechargement/creative/%20audigy%205.2.0.042.exe) (newer installer maybe can't be patched w/ ctcomp).
jutapa

NI USB-8473 Windows can not find Driver

After I install my CAN Software 2.6.1 and connect my USB device, Windows starts the Hardware Wizard but, can not find the Drivers for this device. I started out with 2.4 and uninstalled and reinstalled it which did not help and then I upgraded to 2.6.1. This did not seem to help either. My impression is that this is something to do with Windows or the computer, but I thought I would ask if anyone has seen this problem before in case it is a hardware or software issue.
Solved!
Go to Solution.

Hi,
Thank you for your post. The NI-CAN driver is an inf file titled nican.inf. Instead of automatically detected the driver in the Found New Hardware Wizard, try browsing to the nican.inf file. This file is found in the following directory: C:\Program Files\National Instruments\NI-CAN\staging.
If this doesn't work, I would run the Microsoft Windows cleanup utility linked below and remove all NI-CAN registries from your system and then reinstall the driver once again.
http://support.microsoft.com/kb/290301
Regards,
Todd V.
National Instruments
Applications Engineer
NI Prototyping Community

Can not find drive A

I have a Satellite A505-S3980,I tried copying some pics to a disc using the soft ware that came with my camera (sony A200).Ayway when i tried copying some pics,the computer can not find the drive and at one point it said that there is an error (error 39) and corrupt driver. I did not even know about this problem until i tried to copy some pics to a disc.I need some help,anybody out there know what i can do to solve this? Thank you.

it sounds like you are trying to put pics on a cd/dvd? if the drive isnt showing up in device manager or has an exclamation over it try this. support.microsoft.com/gp/cd_dvd_drive_problems
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

I have a compaq 6200 pro i can not find the driver for SM bus controller.

I down graded the 6200 pro with the i3 chip to winXP and now I can not find the driver for the SM bus controller does this system have a sm bus controller?

Hi: Please click on the device in the device manager. Then click on the details tab. Post the top string of characters you see. Those will identify the type and model of the missing device and I can send you the link to the drivers. It is either your AMT driver, TPM driver or IMEI driver. In the meantime, install the chipset driver and reboot if you have not done so already. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=5037900&prodNameId=5037902&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-88640-1 Paul

Apple loop index is empty folder!!! Can not find loop in logic browser because they just no longer exist on my hard drive, what would be the new appropriate step to take?

Apple loop index folder is empty from the hard drive, which may explain why i can not find loop in my logic pro browser, just sort of grey in disaabled format. what would be the next appropriate steps to take??? I do have an external back up disk.

The IDE interface that the iBook and your desktop use are the same, just a different plug size. So with the rite adapter you could put the iBooks drive in your desktop, you could even boot off it too.
If you want to install the laptops HD in your desktop this will do it for you. Or you can use the iBooks HD as an external hard drive with this

SCXI Device Driver - can not find

Similar Messages

Maybe you are looking for