SD accessory w/ IPAD

Can I use the SD accessory to transfer MP3 podcasts to my IPAD. If yes, how is the done. I can't see anywhere that the IPAD recognizes the SD connector.

no. the camera connection kit only recognizes a DCIM folder and only recognizes images and videos that are in supported formats within the DCIM folder...

Similar Messages

  • Keyboard accessory for iPad 2

    HI there!
    I feel that I am doing more typing on my iPad 2 than my laptop nowadays. So, I want to ask if you guys can recommend any good keyboard case accessory for my iPad 2 that is of high quality casing and one that rotates 360 degrees.
    CAn someone pls help.
    THank you.

    Hello there, BornbAd83.
    The following Troubleshooting Assistant outlines some useful steps to attempt resolution of your issue:
    Apple - Support - iPad - iPad Troubleshooting Assistant
    http://www.apple.com/support/ipad/assistant/ipad/
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Does someone make a wide angle lense accessory for iPad video camera?

    Would like to widen iPad video camera perspective when using Skype app. Looking for aftermarket product like Phocus, but for iPad video camera. Anything out there or do I need to develop a start-up myself? 

    There are a number of lens kits available that will work on the iPad, but I've never seen one that will work on the forward lense (which is what I assum you are looking for). Doesn't mean there isn't one however.
    You might start here: https://www.google.com/search?q=iphone+lense&oq=iphone+lense&aqs=chrome..0j69i57 j5j0.5236j0&sourceid=chrome&ie=UTF-8#q=ipad+lenses&tbm=shop

  • IPad power button stuck

    i need help with my iPad power button ..it got stuck..
    any tips on how to fix it? or should i just go to a apple for repair?..

    Is there a case on the iPad? If there is, try removing it and testing the button again.
    If the issue is not caused by an accessory, the iPad will most likely need service. To get the iPad serviced, just make a reservation with a Genius or call AppleCare.

  • Apple TV (2nd gen) not showing up as a device in iTunes

    Hi all,
    I have this problem. The Apple TV (2nd gen) does not show up in iTunes under devices, and I really don't know why.
    Mac OSX 10.6.5
    iTunes 10.1
    AppleTV 2nd gen with latest update installed
    Network is a WiFi Airport Extreme (Mac and AppleTV are indeed on the same private network)
    Airplay works, home sharing works fine. Remote App on iPad and iPhone works.
    But the AppleTV is not showing up under devices.
    I had a 1st gen AppleTV which I reverted to "factory settings" before unplugging. The 2nd gen ATV had the same name as the 1st gen at the beginning, but I changed it afterwards figuring it might be related.
    Under iTunes > preferences I had the AppleTV tab. But I did read somewhere on Apple's site you have to "delete" the AppleTV from the list. So I did, and now the tab cannot be found anymore...
    Can anyone help?
    Thank you in advance.

    iMat77 wrote:
    I seem to recall though that I have seen a screenshot somewhere on the web where iTunes showed the ATV 2nd gen as a device.
    Not seen that, but the old ones have a logo that look (to me) like the new one, or at least a small darker grey than they are - they show up nicely in the iPad/iPhone Remote app though
    If you are right it would be huge disappointment!
    I believe I am correct as I've got new/old AppleTVs connected to 3 Macs and a dual boot Mac Pro currently, and the new unit has never appearede under devices.
    .... I really HATE the interface organization right now. Why on planet earth do I have to go under "devices" -> "computer" -> "music" just to play some music?
    You, me and many other AppleTV 1 users. I think they'd finally got it right in 3.02 for AppleTV 1 which is a much nicer user interface. Basically now the majority of the top level columns are unused by many people who don't rent but want to playback theit iTunes media.
    I firmly believe Apple see this new AppleTV as a relatively cheap accessory for iPads/iPhones/iPods to show video/photos via Airplay on your TV without using a computer.
    Secondly it's a vehicle for pushing itunes Store rentals, but for the majority of worldwide users they can only get Movie rentals, and Netflix is of no use bar in a few countries (US/Canada).
    I would have much more preferred that a "music" tab (it also applies to all other tabs, movies, tv series and so on) and then just a list of all "home sharing" connected computers from which I could pick the one where the music is stored. Or even, and being Apple it surprises me they didn't implement it, just the list of the available music on my network, with a little tab indicating in which computer it is located.
    Yes that would make absolute sense - a dynamic list of available content based on connected libraries that changes as new libraries appeared on/left the local network.
    The new menu organisation is quite shoddy to me, ut many users new to AppleTV like it and rave about the devices not knowing what the old one could do - it's a good device don't get me wrong, but I still prefer the older units except for their power consumption and the fact I feel they are more likely to fail due to their high temps and mechanical hard drives.
    But here I'm venturing FAR off topic.
    Don't think so, it's a valid comment.
    Use this:
    http://www.apple.com/feedback/appletv.html
    Thank you for your help anyway. I wait for confirmation of somebody else just to make sure...
    Fair enough.

  • A question for selling product

    I have seen that there is Matias keyboard sold in Apple online store. I would like to know if we want to sell our accessory for ipad in apple store(the brand is not apple), in which way can we do it, and who shall we contact?
    Thank you very much for your attention!

    Since it doesn't appear you're looking for a technical solution, I don't really have a clue how you can contact them via email to sell them something (if that's what you're trying to do).......If there's an Apple store near you, you might want to go there and inquire.......

  • HT4108 Digital AV adapter does not support iPad 2. Error message "This accessory does not supported by iPad"

    Just bought latest digital AV adapter MD098ZM/A. Does not work with my iPad 2. Error messade" this accessory is not supported by iPad" while the package saying it supports iPad 2 and later.

    It's works with the new iPad. It said "accessory not supported". I clicked OK and now it works.

  • I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

    I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
    THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
    Help!

    If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
    This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
    Is this what you bought?
    You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

  • After iOS 8 update: "This accessory is not supported by this iPad" using Digital AV Adapter on iPad 2

    After the update to iOS 8 on an iPad 2 I receive the error: "This accessory is not supported by this iPad" using a digital AV adapter. It works for about 20 seconds before I get the error. Same adapter worked with iOS 7.1, same adapter still works on my iPhone 4s with iOS 7.1.
    Curious if anyone else has this issue. The adapter is not a genuine Apple adapter, so I think I'll just buy an official Apple adapter, but I'd love to hear if anyone else has upgraded to iOS 8 and can still use their digital AV adapter on iOS 8 with iPad 2, and what brand of adapter you have. Thanks!

    Still not working. My adapter shows as an apple A1422. I can successfully plug it in to an iPad 2 with an older IOS but mine which is on 8.1.2, gives the error "This accessory is not supported by this iPad." I tried turning off the iPad and connecting it to the tv before turning it on. When it is turned on, it displays on the tv for a moment, then the message pops up and no picture is on the tv any longer. Clicking ok does not change the lack of a picture On the tv, but I can use the iPad as normal.
    I've tried the adapter on a different iPad 2 that is not on IOS 8 and no message appears.
    Help, please!

  • After iOS 8 update: "This accessory is not supprted by this iPad" using Digital AV Adapter on  iPad 4th generation

    after update iOS 8 my camera connection kit does not work on my 4th generation iPad message reads 'this accessory is not supported by this ipad'
    has anyone else had this problen

    I Have ordered from Amazon an Apple MD822ZM/A Lightnjng to SD Card Camera Reader £27.95. I will let you know if it works. I am annoyed as I do not think it is fair that you can only use Apple accessories and I am sure there must be others too  My other was not Apple and cost under £10 but now after update does is not compatable!

  • Is there an accessory that will allow me to connect my iPad 2 to a TV and at the same time have it charging?

    I'm going on vacation and want to watch movies on a TV by connecting my iPad 2 to the TV.  I've got the cable for that.  However, I'm afraid of the battery going dead right in the middle of a program.  I've noticed that the iPad dock only has one outlet in the back for a cable.  Is there a dock or another accessory that would allow me to have my iPad charging while I also have it connected to the TV to watch the movie?  Thanks.

    If your TV is HDMI (and most are now) the Digital AV adapter does just that. Just remember that you need to have an HDMI cable.
    http://store.apple.com/us/product/MC953ZM/A?fnode=MTc0MjU4NjE

  • After updating ipad 2 to IOS 5.1 composite video cable says "this accessory is not supported by iPad"

    Now that I have updated my iPad 2 and iPhone 4s to 5.1, when I connect my composite video cable to watch netflix or other video on my TV I get the message that the accessory is not supported.  The audio goes through fine, but the video only plays on the device.  Anyone else run into this?  Ideas on how to fix it?
    Thanks.

    I have the same problem. Even worst, I use my iPod touch at the gym cause our bikes and threadmills have iPod connection (and screen of course) so I used watch TV shows from my iPad. Last week, thought the treadmill connector on the machine was broken... from what I see, it's the TV out on the iPad that is not working anymore.
    Once home, I used my composite cable, well just like you got a message : "not supported" tried on iPad and Ipod Touch.
    THANKS APPLE WITH YOUR STUPID UPDATES!!!!
    But now seems your Video cables won't be selling much if not working hey?
    And reboot has no effect, don't waste your time.

  • Digital AV Adapter: "Accessory not supported" and "TV Out" settings gone after upgrading iPad 2 to iOS 5.0.1

    I've used the digital AV Adapter (bought in Apple Store) nicely on iPad 2 with iOS 4.3.x.
    After upgrading to iOS 5.0.1 the TV Out settings have disappeared from the General Settings menu (no matter if adapter is plugged in or not).
    I thought that maybe it was time to do a full reset (just in case), so I did that, while the adapter was still plugged in.
    When the iPad finished resetting I got a popup message on the lock screen saying:
    "This Accessory is Not Supported by iPad"
    The adapter sort of works, i.e. there is a picture on my TV, but I cannot control the TV output settings which I could in iOS 4.3.x.
    The TV Out settings are completely missing from the General Settings menu (if they were moved in iOS 5.0.1 somewhere else, I could not find them).
    The "TV Out" menu item is not there at all.
    I cannot select between PAL/NTSC output anymore which is crucial for me as it seems that the iPad current setting is PAL, while I need to be it NTSC, otherwise video drop frames/stutters when played back over a TV.
    What I would like to know if there is anybody out there who has iOS 5.0.1 and actually can see the "TV Out" settings under the General Settings (I think it should follow the "iTunes Wi-Fi Sync" directly), because no matter what I did I cannot the settings menu to be displayed (I've reset the device, plugged and unplugged the adaptor and HDMI cable multiple times, tried different TVs, etc)
    Or, if the settings are in fact, gone by design, then how am I supposed to play 23.976 or 24 FPS media on a 1080p50 TV without stuttering (don't answer that, I know it is impossible, I am just frustrated). This is the first ever device I bought from Apple and I must say I am not that impressed by such turn of events.
    I mean, what kind of update removes essential features and makes the officially produced accessory suddenly "not supported"? Did they even test their own official accessory?? Seems not to me.
    This thread is talking about sort of similar issue (although it is about the VGA adapter):
    https://discussions.apple.com/thread/2413622?start=0&tstart=0

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • My av adaptor does not work. Tried to plug my ipad into my samsung hd tv and ipad said it does not support that accessory...help

    My av adaptor does not work. Tried to plug my ipad into my samsung hd tv and ipad said it does not support that accessory...help

    What ipad,  which model samsung?  Are you attempting HDMI, VGA, or an RGB connection.  Ipad 2 supports mirroring into an HDMI at an output of 1080.  Ipad 1 is limited to only a few apps capable of the output, such as Youtube.
    page64,65 of the latest ipad manual has more details.
    Samsungs are good and should switch with the input - but sometimes you will have to select from the menu manually.
    If in doubt, contact the customer support at samsung UK.
    Also check - Settings/Video, that you have it enabled for Home Sharing.  Apple Id  which will be your .me.com  email plus your apple ID password.  I am not too sure about  this as I cannot remember the exact order I set things up in - but page 89 of the manual references Home Sharing for sharing ipad/itunes content on a home pc/mac - so I would think it applies to content relayed to a tv or monitor too.

  • HT1349 I have an iPad 1 what Apple accessory do I need to use a CF card to upload photos

    I have an iPad 1which I have had for about 3 years and would like to load via a CF card my photos direct to the iPad . What apple accessory do I need to purchase to make this happen ?

    You may be able to get a USB CF card reader and then use the CCK's (linked to above) USB port to conect the reader to transfer the photos.
    You should also be able to do this directly form the Camera through the USB port on the CCK.
    Note that there's not much power available from the iPad to power the reader or the camera, so you may need a powered USB hub in the middle to get them to work.

Maybe you are looking for

  • Dynamic jar file inclusion at run time

    Hello, I have a java application which should accept the three parameters. 1) The jar file location 2) Particular Class file insdie that jar(we specified the location in step number 1) 3) And method name in that class. My question is how to include s

  • Iphoto Freezing

    Iphoto keeps freezing when i try to import or view recovered photos, here is the log: Date/Time:       2011-12-24 17:18:56 -0600 OS Version:      10.7.2 (Build 11C74) Architecture:    x86_64 Report Version:  9 Command:         iPhoto Path:           

  • How to add attribute to groups.

    When I add a groups, Identity askme name of group and member for suscrib. I need add attribute to groups, attribute that not exits in groupsofuniquenames. Thanks

  • Import  xml and query

    Hi, Thanks in advance for reading this. I am new to this XML and import into database. I have the xml file, i need to import this into database and search on the database. I have around 2.2 million records in the database. Please explain me what is b

  • Menu Text Rollover Possible?

    I am a classical musician, and I'm creating a DVD of my work to send out to managers and potential sponsors. Towards that end, I've put together an iDVD project using the "Reflection Black" Theme provided within iDVD. For the most part, I'm quite hap