SD and HD preview (output only) interface choices?

Hi there, I need HD & SD preview ability (to a couple external reference monitors), but no capturing is required. Most interfaces (much like audio) tend to include both A/D and D/A but I only need D/A for output. Do I need to buy a video interface with both ins and outs to get what I want?
Many thanks!

The Matrox MXO takes a DVI signal from your computer and pulls out YUV, audio and timecode. From there you can connect via HD SDI, Component or Composite to any monitor with those options...or (this is my favorite part), you can connect it to an Apple 23" Cinema Display via DVI again and get BROADCAST QUALITY COLORS!
That's right. What's more...the new version of the drivers (still in beta) give you pro amps an display color bars so that you can adjust them to give you the perfect image. And yes...BLUE ONLY option as well.
AND....it downconverts to SD in realtime thru the box. And you can output to tape in many formats.
So with the Matrox MXO ($999) and the Apple 23" monitor ($899) you can get a broadcast HD or SD monitoring option for under $2000.
I am SOLD on this option. But, I am also a huge AJA fan. But I use that for my tower.
The Intensity from Decklink gets you HDMI out to HDMI...so only to a monitor with that option. The Intensity Pro gets you Analog in and out, so that is an option. But it won't turn your Apple display into a broadcast quality monitor.
Shane

Similar Messages

How to enable standard actions and print preview in Output management in FU and FO in SAP TM9.1

Hello Experts,
This is regarding the Output management on Truck load scenario.
I have maintained configuration which is related to output management in Freight order type (truck load).
Configuration is :
Output profile : " /SCMTMS/TOR" and
Add. Output Profile “ /SCMTMS/TOR_PRINT_ROAD”.
Results: I have created a Freight order based on the FU ( Sales order ) , go to output management tab in FO, I can see only one Action status that is “Shipping Instruction” .
Expectations: I am expecting couple of other FORMs like HBL and label and etc which is available in “/SCMTMS/TOR_PRINT_ROAD”.
/SCMTMS/PRINT_AIRPORT_TRANSFER Road Waybill (Europe)
/SCMTMS/PRINT_CMR Road Waybill (Europe)
/SCMTMS/PRINT_CMR_MAN Road Waybill (Europe)
/SCMTMS/PRINT_DELIVERY_ORDER Road Waybill (Europe)
/SCMTMS/PRINT_FFI Shipping Instruction
/SCMTMS/PRINT_FFI_MAN Shipping Instruction
/SCMTMS/PRINT_LAB Label for Packaging
/SCMTMS/PRINT_LAB_MAN Label for Packaging
/SCMTMS/PRINT_MAN Shipping Manifest
/SCMTMS/PRINT_MAN_MAN Shipping Manifest
/SCMTMS/PRINT_PICKUP_ORDER Road Waybill (Europe)
/SCMTMS/PRINT_TRUCK_MANIFEST Road Waybill (Europe)
/SCMTMS/PRINT_VICS Road Waybill (U.S.)
/SCMTMS/PRINT_VICS_MAN Road Waybill (U.S.)
Also, When I am executing “List of Actions” by manually I can see all of above actions in popup screen but by default “scheduled condition” check box is checked on “Shipping Instruction” not rest of them.
Would you please guide me what I am missing?
Thank you very much.
Regards,
Surender reddy

Dear Surender,
For PPF customizing you can follow SPRO path -> Cross application components ->Processes and Tools for Enterprise Applications->Reusable Objects and Functions for BOPF Environment ->PPF Adapter for Output Management->Maintain PPF Settings -> Select the application '/SCMTMS/TRANSPORTATION' -> Define action profiles and Actions.
Select the required action profile (Here in your case /SCMTMS/TOR or /SCMTMS/TOR_PRINT_ROAD)-> select the required action definitions -> Make sure 'Inactive' checkbox is deselected against the required action -> Choose processing types -> Here you can assign a new form. You can also create new action definitions and assign forms accordingly.
Then go back and go to 'Condition configuration' ->Choose the required action profile -> Check the Start condition and schedule condition. Make sure you have 'Schedule automatically' radio button selected under overview tab.
Print preview is also called as Document preview. To my knowledge this tab should be displayed default with standard under Output Management tab. Document preview will appear upon selecting the action in Output management tab. If not appearing just check the WD component customizing or personalization.
Let me know if you have any specific questions.
Link below to PPF and Output Management in SAP TM document would help you.
http://help.sap.com/SCENARIOS_BUS2013/helpdata/EN/82/717662E5D84908B8777042308B24FE/OUTPUT_MANAGEMENT_GUIDE_SP37_2.pdf
Best Regards,
Bharath.K

How to make pricing field as output only in sales order header and item lev

Hi ,
I want to make the field PRICING DATE as output only both at header and item level. How can i do pls guide me in detail.
Regards
Sunaina

Hi Sunaina ,
Through User Exit you get this requirement plese take help of ABAPer to activate the user exit according to your requirement.
Try With this User Exit
Program MV45AFZZ
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
I hope it will help you,
Regards,
Murali.

Trying to create a new movie. It tells me to name my movie, and the only event choice is the last movie I made. I don't want it there. I'm lost and I'm just starting. Not sure I like the new version. Any help out there?

I'm trying to create a new movie. It tells me to name my movie, and the only event choice in the drop down menu is the last movie I made. IMovie Library is greyed out. I'm lost and I'm just starting. Not sure I like the new version. Any help out there?

peggy818 wrote:
… I'm lost and I'm just starting. Not sure I like the new version. …
have a read in the Manual:
http://help.apple.com/imovie/mac/10.0/?lang=en#mov755717b21

When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb.But the output records is originally 4000 records. When copy to new excel it is showing 3.5 mb only. Does anyone knows the answer for this issue?

When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb. The records contained in excel file is 4000 records. When taking the excel records and copy to new excel file the excel file size is 3.5 mb only.Why does the oracle software generates 20mb file?
Does any one knows the answer please advice?

Hello,
This issue is because the Excel output from BI Publisher is MHTML (XML Publisher generates XHTML) not binary .xls.
MHTML and XHTML are more verbose formats than binary .xls.
It will be large because the current Excel output is just an HTML and not compressed like PDF. Please use the workaround (save it as .xls file). This is a known limitation of RTF layout templates.
BI Publisher Enterprise has a new feature True Excel Templates. The layouts generate binary Excel output.
Excel Output File Size Generated By BI Publisher is Very Large (Doc ID 760437.1)
Bogdan

Dtt3500 and Audigy Gamer, digital output only 2 channel unless its D

Ok I recieved a response concerning my last comment but unfortunatly it did not answer my question at all. I have a DTT3500 and a sound blaster Audigy Gamer hooked up with the digital out to the /8 din adapter. I try the advanced 3d demo that came with the Audigy software and I only hear the front 2 channels, no center and no rears. The demo where you move the little icons and sound moves along with it. I have 5. activated in my windows control center along with audioHQ and digital out only is selected. my DTT3500 has 4./5. digital selected along with dolby digital/pcm audio and digital in. I am not getting the effect of multisurround at all. My center works and my rears work because playing music I can use all 5 speakers. When I use the analogue outputs I hear multisurround from the advanced 3d demo but my center doesnt work. The analogue setup sounds better but without a center channel its useless to me. Am I doing something wrong? I am using the adapter and digital DIN, what gives? The only reason I noticed I wasnt getting surround was while playing games nothing comes from behind you even on 5. games. The goldmine demo doesnt even work right, when the bird flys behind you it disappears but there is still sound from the rears. Analogue fixes this without a center but the manual and setup say to use the digital din. Do I just have a setting wrong? I would like to experiance the full capacity of multispeakers in my games.

Dennis,
With these speakers the connection that I would suggest would be to use the Digital out on the back of the sound card into the DIN Input on the DTT3500's. This will require a converter cable for /8'' Minidin to standard DIN which can be purchased from here:
http://us.creative.com/products/prod...0&product=0375
You will also need a standard DIN cable (one should have shipped with your DTT3500's).
This should give you 5. with digital output only enabled on the Audigy.
Jeremy

I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows. How do I get back to Mac so I can have a choice of drives?

I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows. How do I get back to Mac so I can have a choice of drives?

That doesn't sound good. It sounds like the power outage might have corrupted the partition for OS X. I would suggest booting from the Install DVD that came with your Mac while holding down the C key. Once you have selected the language start up Disk Utility from the pull down menu and repair the disk. Once you have done that then repair permissions also.
Allan

I've been sent a scan of a document as an attachment. Clicking on it, I get the message, "Pixel aspect ration correction is for preview purposes only. Turn it off for maximum image quality." What is pixel aspect ration and how do I turn it off?

I've been sent a scan of a document as an attachment. Clicking on it, I get the message, "Pixel aspect ration correction is for preview purposes only. Turn it off for maximum image quality." What is pixel aspect ration and how do I turn it off?

It's "aspect ratio", not aspect "ration".
It's what determines whether you have square pixels ("normal") or, if rectangular pixels, what the aspect ratio (width : length) of that rectangle is.
It's explained in the Help files. I cannot go into more detail because you have neglected to provide information about your platform and exact version of Photoshop.
Example in next post

HT204150 I have only 2 choices for contact groups on the iPhone 5, hotmail and iCloud. If I click both then I have all my hotmail contacts which I don't want. However if I only click iCloud, any new contacts I add don't show up :(

I have only 2 choices for contact groups on the iPhone 5, hotmail and iCloud. If I click both then I have all my hotmail contacts which I don't want. However if I only click iCloud, any new contacts I add don't show up

Only contacts added to the iCloud group will sync with iCloud. To make this your default, go to Settings>Mail,Contacts,Calendars...scroll down to the Contacts section and tap Default Account. Here, choose iCloud as your default. After doing so, new contacts will be added to iCloud and sync with your iCloud account.

Sound output only has option for Digital Out, no internal speakers, and no headphones.

I recently got a new 2012 Macbook Pro 15" and my sound output is not working correctly. The only option is Digital Out - Optical digital-out port. There is no intenral speakers option, nor is there a headphones option when I put them in. I am running Mountain Lion and unfortunately have tried looking up similar posts with no help. I have attempted to reboot the SMC and perhaps one other trick, but I have not had any luck. If anyone has any idea what I should do or if you need more information to make a diagnosis that would be great! To note, it worked fine when I first got the computer, but when I was messing around trying to hook my computer up to an HDTV (i have a thunderbolt HDMI cable that sends sound as well) I had a couple of problems (I think it was because it was a very old Vizio that did not support the HDMI) and perhaps some of the settings got changed on my computer. Anyways thanks in advance!

Hi,
That is good news! For some reason I only experienced that for a little while before it straightened out itself. But I know that was driving a lot of people crazy. Thanks for pointing out that 10.6.2 did the trick.

Bridge CS4 Output Only 10 Images to Web Gallery

Hello all,
I have, in Bridge, output workspace, selected 14 imges to be output to the web gallery and only the first 10 images are processed. Any idea as to why? Maybe it is as simple as a setting in the preferences? Thank you so much in advance.

If you are referring to what happens when you click "Preview in Browser", then yes, the output does only include the first ten images.
To preview the full Web Gallery before uploading it, you must generate the Web Gallery and then preview it by double-clicking on the "index.html" file which will cause it to open in your default browser.

About mismatch in print layout in direct print and print preview and pdf!

Hi ,
I have created one smartforms,when I run the standard trasaction VF03 and select any output type and then when I click on print preview button,and then when I put PDF! in address bar ,the print preview will convert in PDF format,it will show output without bold and comes only in normal fonts.
Also, when I run transaction VF03 and direct click Print button, then it shows print as per requirement , but it overwrites some part on the end of page where company address is priprinted on stationary,so how can i show print format same in both condition without overwriting?
Thanks.

HI friend,
The one which is coming in the print (hard copy) is the correct one.
Print preview may be different.
So if the print is coming in overlapping format means check whether the windows are aligned properly. Because if you have given any data in main window and when it grows it over laps on another window.
If that's is correct check the printer settings for it. Only these would cause the print to be distorted.
Check this and revert back if you have any issues we will help you.
Thanks,
Sri Hari

Live View Preview is only available with...

When I select preview 'server' from the Browser Lab panel in Dreamweaver I get this message:
"Live View Preview is only available with BrowserLab Local/Network preview option, please select the Local/Network preview option."

Hi Mattdwm,
Yes this behavior is 100% correct, and what you observed about it only working if you toggle Live View off is what the error message was trying to tell you.
I'll try to explain - in Dreamweaver's Live View mode you can interact with your page "freeze" the javascript in intermediate states. The information about those states is only contained on the local machine. So if you were to perform a server preview from DW while in Live View, the page would only be in the base/default state in the screenshot captured by BrowserLab. So the only way BrowserLab can get the properly get the info about the intermediate state you've navigated to is if you choose the Local/Network preview option.
I suppose we could have implemented things so that it would not show you that message if you haven't done any interactions with your page in Live View, but I think that would actually be more confusing, as it would sometimes work and sometimes not work. And even if we could automatically switch over to Local/Network mode for BrowserLab while you're in DW's Live View mode, we probably wouldn't because we want that to be a choice made explicitly by our users.
Thanks for your interest in BrowserLab, I hope this helps,
Mark

When I use the selection tool to move vector points and bend edges, I only see the change in wire frame.

When I use the selection tool to move vector points and bend edges, I only see the change in wire frame. Once I commit by letting go of the mouse button, the object does change. It just previews with a wire frame. I would like to see the preview change on the solid object. Is there a setting somewhere?
I sure hope I am explaining this for people to understand .
Thanks
Ed

Hi Ed,
What do you mean by wire frame??And are you using selection or sub-selection tool since you have mentioned about vector point I doubt if it is sub-selection tool.Could you please attach a video demonstrating the issue where we see the mismatch in the preview and the output, so that we can understand the problem better and try to resolve it.
Thanks,
Sangeeta

NetFlow sends only interface-table, no templates, no flows

Hi,
configured NetFlow on a 3750-X with Network Module,
but it generates only interface-tables, no templates or flows.
Here my Config:
flow record Ingress
match datalink source-vlan-id
match datalink dot1q priority
match datalink mac source-address
match datalink mac destination-address
match ipv4 version
match ipv4 tos
match ipv4 ttl
match ipv4 protocol
match ipv4 source address
match ipv4 destination address
match transport source-port
match transport destination-port
match interface input physical snmp
collect interface output snmp
collect counter flows
collect counter bytes
collect counter packets
collect timestamp sys-uptime first
collect timestamp sys-uptime last
flow record Egress
match datalink destination-vlan-id
match datalink dot1q priority
match datalink mac source-address
match datalink mac destination-address
match ipv4 version
match ipv4 tos
match ipv4 ttl
match ipv4 protocol
match ipv4 source address
match ipv4 destination address
match transport source-port
match transport destination-port
match interface output physical snmp
collect interface input snmp
collect counter flows
collect counter bytes
collect counter packets
collect timestamp sys-uptime first
collect timestamp sys-uptime last
flow exporter export-to-Paessler
description PRTG Network Monitor - NetFLow
destination 10.10.10.27
source Vlan5
transport udp 9991
template data timeout 60
option interface-table timeout 60
flow monitor FlowMon_Ingress
record Ingress
exporter export-to-Paessler
cache timeout active 60
flow monitor FlowMon_Egress
record Egress
exporter export-to-Paessler
cache timeout active 60
interface Vlan91
ip flow monitor FlowMon_Ingress input
ip flow monitor FlowMon_Egress output
sh switch service-modules
Switch/Stack supports service module CPU version: 03.00.65
Temperature CPU
Switch# H/W Status (CPU/FPGA) CPU Link Version
2 OK 58C/66C connected 03.00.65

Hello,
I do not have English version( I do not want log to US language I am lazy:) This is my translation:) Responsibility Order Management->Setup->Orders->Holds find you hold and look at Authorization. MAybe your pck has error because this.
Regards,
Luko

SD and HD preview (output only) interface choices?

Similar Messages

Maybe you are looking for