SD Billing - Avoid Cancellation Creation if Invoice has not been posted yet

Dear all,
I have noticed this problem in my company system.
Problem descripion:
- you creates an invoice and the system doesn't post it for any reason
- then you create the cancel of the invoice, BEFORE forcing the posting of the invoice
--> user creates Cancel, Cancel is not posted as well.
--> from now it is impossible to post both invoices: if you try to post the Invoice after the cancel creation, the VF02 recongnise that a CANCEL exists and do not allow for the posting
--> standard VFX3 doesn't signal this kind of not posted documents situation.
Ok, The right procedure for thes user should be: create invoice, if not posted then try to understand why not posted, and not CANCEL it.
But in this case VFK3 was not able to detect the invoice was not posted: it was not in the list.
So the 2 ways must be:
1) one possibility could be undestand in VFX3 could be enhanced: I checked in OSS but I didn't find anything.
2) other possibility: add a further check in interface between SD and FI in order to check if original invoice is not posted to FI and in this case block the cancel creation, as instead standard SAP does.
Could you please give me an idea on how it would be better proceed?
Thank You very much.
Raffaella

Dear,
thank you for your feedback.
in VOFA the flag is not ticked.
The problem was that In VFX3 no data were found for the specified document (with all "Inclomplete Due To" check box  flagged), even if invoice and relative cancel were already created, but not posted.
When we tryied to to post them, via VF02 for example, the system didn't warned anything specific and, doing the posting via debug, we discovered that the posting was stopped because VBRK-RFBSK = E = "Billing Document Cancelled".
So, forcing via debug that value = ' ', because of the urgency of Finance Office, we could invoice it and then do the same for its cancel.
So at the moment it is not possible for me to reproduce the error in the system.
The only workaround I can imagine, is to find a way to avoid cancel creation if invoice is not posted yet.
Do you think this is feasible way?
Thank You veyr much for your suggestions.
KR
Raffaella
Edited by: Raffaella Sacchetto on Nov 29, 2010 3:43 PM

Similar Messages

  • Report for list of POs for with Invoice has not been posted

    Hi All
    Can anybody tell me the report for list of PO' for which GR has already been done but Invoice is not posted
    Thnks
    Ranjith

    Hi
    Try Report ME2M,
    With input selection parameter  "WE101".
    Hope this helps.
    Harish

  • Goods issue has not been posted for delivery

    HI Experts,
    When my user creating the billing he is getting the problemu201Dgoods issue has not been posted for deliveryu201D.
    I investigated and found that in delivery qty for line item 10 (delivery qty is 1 and picking qty is 0) he is not maintained a picking quantity. I asked the user to maintain this. But when he uses the transaction code vl02n he is not able to change the picking quantity from 0 to1 why because the screen is grey mode and one more thing he is not able to cancel the u201CPGIu201D.
    Can any body let me know how to pick a qty in delivery what configuration I have to check .
    Regards,
    Sunina A

    Hello,
    As picking is not activated in the screen, thenyou need to go for a Transfer order Go to VL02N --> subsequent functions --> Create trnasfer order. The system will take you to create transfer order screen (LT03). Save it. Check the delivery whether the pick quantity has been updated ord not? If not then go for confirming the transfer order by transaction LT12. The picking quanity will be picked up. Now proceed with PGI.
    Prase

  • The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    Hey there Luba_kalstad,
    It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section down toward the bottom if needed:
    Unable to locate a Wi-Fi network
    Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
    Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
    If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
    Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • HT4009 I made a in app purchase on a game and it never took, when I went back and tried it again a window popped up that said I have already purchased this item but has not been downloaded yet? How do I download it when there is not a option to download?

    I made a in app purchase on a game and it never took, when I went back and tried it again a window popped up that said I have already purchased this item but has not been downloaded yet? How do I download it when there is not a option to download?

    Hi Dave_warr,
    I would suggest restarting the iPad and see if the download resumes.
    iTunes: How to resume interrupted iTunes Store downloads
    Resuming downloads from an iOS device
    From the Home screen, tap the iTunes icon.
    For iPhone/iPod touch, tap More > Downloads. For iPad, tap Downloads.
    Enter your account name and password.
    Click the "OK" button.
    Click the Resume or Resume All button to start the download.
    If you don't see the application to download it, then follow these troubleshooting steps:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    If the app does not appear in your list of purchases, then contact the iTunes Store for help:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    I hope this information helps ....
    Have a great day!
    - Judy

  • I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. Is there any way to follow up on where the nano could be? I sent it via FedEx.

    I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?

    I sent it via FedEx. 
    Call FedEx.  They will be able to track their own packages.  They will let you know if your iPod Nano was delivered and to who!

  • Goods receipt for purchase assignments has not been posted

    Hi all;
    In Vl02n in goods issue steps i have a message "Goods receipt for purchase assignments has not been posted"
    -the purchas order is assined to items delivery correctelly!
    -in our case, we haven't a stock.
    -after goods issue in vl02n we have tow goods mvt (101 for goods receipt) and (601 for goods issue) for the same quantity.
    so can you tell me how to solve this problem
    thx

    ok sir ;
    No i don't talke abouat STP i don't have any transit stock it's a simpl sales based on global purchas
    -first with me21n i created global purchas order
    -the sales will be picked from this purchas .
    -delivery is assigned automatically to this purchas order  with user exit.
    -with vl02n in goods issue steps there is tow operations ( stock mvt 101 in purchas assignement and a normal 601 for delivery )

  • Goods receipt for purchase assignments has not been posted. Mes. no. O1573

    Dear expert,
    I got a proplem with Intercompany STO as detail below:
    Goods receipt for purchase assignments has not been posted.
    Message no. O1573
    Diagnosis
    Certain fields needed for posting Goods Receipt have not been entered.
    System Response
    The goods receipt for Purchase Assignment was not posted.
    Procedure
    Check the error log and make the required entry.
    process Step by steps:
    1- create PO (intercompany PO) --> save
    2- create SO to sell to endcustomer (at receiving company)
    3- create DO
    4- assign the previewous PO to DO  (exchange function)
    5- PGI ---> problem as above
    Please, kindly help

    Dear all,
    In this case,  if I enter itemcategory "U" into PO I can post GR and GI at the same time I do PGI. but you know if I use "U" which mean I can't enter the net price as normal because this is a "stock transfer".
    Is there any ideal for this?
    Please, help me

  • HT204370 can you return a movie purchased by mistake that has not been viewed yet?

    can you return a movie purchased by mistake that has not been viewed yet?

    Hi jimmy505,
    The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    Find the email receipt for your purchase.
    Click Report a Problem under the app that is having the issue.
    When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having an issue with.
    From the Choose Problem dropdown menu, choose the appropriate issue.
    Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    Click Submit to have your issue reviewed.
    Hope this helps ....
    - Judy

  • The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

    Dear Gurus,
    We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
    The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
    We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
    We updated the Kernel to the latest, but still no luck.
    Request for your quick help as we have to complete it by EOD today.
    Thanks a lot in advance.
    Best Regards,
    Anuj

    Hello Ashutosh ,
    Thanks for your reply.
    We have gone followed the below sequence:
    SCS Installation
    Database Instance Installation using backup/restore method
    CI installation. -> getting error, when we provide the Java Components DVD.
    Best Regards,
    Anuj

  • I purchased Adobe Creative Ste 5.5 Master Collection for windows for my college student daughter in '12 and she would like to install in on her iMac.  Please advise on the process.  Software has not been used yet.

    I purchased Adobe Creative Ste 5.5 Master Collection for windows for my college student daughter in '12 and she would like to install in on her iMac.  Please advise on the process.  Software has not been used yet.

    you need to exchange your win cs5.5 for mac cs5.5.
    unfortunately, adobe only offers that for cs6, Order product | Platform, language swap

  • I update my credit card but the paymaent has not been debiteded yet

    I update my credit card but the paymaent has not been debiteded yet, what do I need to do?

    This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
    Adobe contact information - http://helpx.adobe.com/contact.html may help
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • The required index has not been created yet in the search engine

    Hi,
    I am trying to change the inspection plan trying to add master insp.characterstics in QP02 the system is giving the following error: "The required index has not been created yet in the search engine".  As per the solution for that error The administration transaction is SES_ADMIN.
    Through the Goto menu, you can enter the relevant customizing directly.
    The index was required for: Business object = QPMK
    Object type = 1
    It is already there. I don't know why still it is showing the error.
    How can i fix this?
    Pl help me. Thanks.
    Madhu

    Hi,
       Not so sure this applies as
    1] The field is using a custom search help which correctly appears for data selection in each case. Its only when we push the go button that the index missing error ishappening for the particular user.
    2] We cloned the user  id for the user having the issue and the clone has no problem at all using the search help.
    Weird huh?
    Ross

  • My wife has a new Ipad and Iphone with icloud. We also have a Imac that has not been upgraded yet that is somehow syncing with her ipad and screwing up the apps. Is there anyway to prevent this. Maybe it is thru mobilme?

    My wife has a new Ipad and Iphone with icloud. We also have a Imac that has not been upgraded yet that is somehow syncing with her ipad and screwing up the apps. Is there anyway to prevent this. Maybe it is thru mobilme?

    I think iCloud isn't coming until this fall and not until iOS 5 is publicly available. Right now there is confusion because all this stuff is still in beta and things are under NDA and may still change.
    I'd just set the 3GS up the same as currently. When iOS 5 is available in the fall (and I don't think Apple has specified beyond "fall"), before you update, there should be any number of guides to setting things up and how it will all work. http://macworld.com is a good place to look for such information.

  • I was stollen and i used the "Remote Wipe" but i didn't know that it won't be able to locate it anymore. It still hasn't wiped it, as it has not been online yet.  Is there any possible way to undo this?

    i was stollen and i used the "Remote Wipe" but i didn't know that it won't be able to locate it anymore. It still hasn't wiped it, as it has not been online yet.  Is there any possible way to undo this?

    First of all i had already blocked it by icloud programm and then after that i received an email of confirmation that it was already blocked. Then i entered in the iCloud programm and saw that the thief it was disconected to not be localized. Do you know that even i had used the Remote Wipe it will work? Because the thief had before the blocked of the phone disconect to not be localized.

Maybe you are looking for