SD card cannot be formatted or written to since upgrade to Mountain Lion.

Since upgrading to mountain lion, I cannot format (write) to any of my MS-DOS (FAT 32) formatted SD cards. Prior to the upgrade this was never a problem. Apple Genius bar and calls to support have been no help so far. Can someone here solve this issue ?

Hi and Welcome to the Forums! If by "device", you mean your BB, probably not. If, by "device", you mean the card, then probably yes. You can keep diagnosing by trying other things:
A known-good card in your BB
This potentially bad card in a different card reader
This potentially bad card in a known-good BB (one that for sure can read it's Media Card)
But, given how short a time you've had it, taking it in for evaluation might actually be your best bet.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Cannot connect to the App Store since upgrading to Mountain Lion.

I downloaded through the App Store Mountain Lion. Everything is working great except that the App Store app. I keep getting "Cannot connect to the App Store" error message. Is it possible that it's still too much traffic on the servers or a bug in Mountain Lion? App Store worked fine before obviously, otherwise I wouldn't be able to get Mountain Lion. I tried trashing the plist and cache.db several times and still no go. Anybody else have this problem? Help!

This seems to be a bug in the OS. After days looking for an answer, I found one that will probably help those of you that, like me, tried just about everything else that has been suggested in the forums:
http://b.rthr.me/wp/?p=356
I came back to this forum, being one of the latest dealing with this issue, to share this. If it works for you then please do what I did and share it in some other forum on this issue to spread the word.
Apple please fix this bug in the OS !!!

Since upgrading to mountain lion on my macbook pro, i cannot email photos from iphoto.

Since upgrading to mountain lion on my macbook pro, i cannot email photos from iphoto.
i can select the picture but when sending it, an error symbol appears.
Any ideas ?

This doesn't work for me at all. I tried entering exactly the same information that I used to set up my regular email account and I'm still getting an error message. I even tried switching to using my gmail account and neither one worked. Then it got hung up and had to repair my database! I have a lot of photos on my Mac (thank goodness they're backed up) and I was really sweating it for a moment.
Apple is so easy until it's not. I find this to be really aggrevating and I'm irritated that it hasn't been fixed. In fact I did an online search and someone described this same problem in detail and it was exactly what was happening to me. Same error messages.
I'm frustrated that Apple keeps updating it's operating system and then we go through these glitches.
And while I'm at it, I have never had such a frustrating time using my login information as I have to get into this forum! Why do they make it so difficult? There's just something about the way it's worded that get's me messed up every time. Meanwhile, at least get iPhoto fixed!

Since upgrading to Mountain Lion I cannot connect to my wireless router

Since upgrading to Mountain Lion I cannot connect to my wireless router. I have 2 wireless networks in my home. One is the primary whuch all of my devices connect to. The other is for backup only. I cannot connect to the primary with my iMac but have no trouble with any of the other devices which include iphones and ipads.phones and iPads. I can however connect to the backup without a problem. I have tried upgrading the firmware of the router as well as changing the security from WEP to WPA-2, no luck. Can anyone help?

Try this, it's for information.
In Finder, open the Go menu, press and hold the option key, 'Library' will appear on the menu, click and scroll to Application Support, open the folder and scroll to 'AddressBook-v22.abcddb'. Click on the file and press Command-I. Towards the bottom you'll see Permissions, tell me what they are please.

Since upgrading to Mountain Lion, I cannot restore emails with time machine. In Lion TM created a folder in Mail called recovered emails(or similar) No such folder is created since ML. I am able to see the email I want to restore, but it then disappears

Since upgrading to Mountain Lion, I cannot restore emails with time machine. In Lion TM created a folder in Mail called recovered emails(or similar) No such folder is created since ML. I am able to see the email I want to restore, but it then disappears

I am inside Mail, waiting for the TM 'recovered mail' folder to appear - which it doen't.
I only looked in my home folder after trying several times from within my Main app.
Marion

Since upgrading to mountain lion I cannot play DVDs

As the title. The computer is an iMac 10.1 21"

I am inside Mail, waiting for the TM 'recovered mail' folder to appear - which it doen't.
I only looked in my home folder after trying several times from within my Main app.
Marion

Cannot Access Earlier Time Machine Backups After Upgrade To Mountain lion

I went into Time Machine to recover some past emails. It shows that it had backed up my emails for the last year, however it will not let me recover anything before my upgrade to mountain lion. Does anyone know of a workaround for this problem. Thank you.

Christopher Sant wrote:
Once it does finally recognize (after a good while) it simply says "Error, time machine could not complete the backup"
There should be more to that message. See #C2 in Time Machine - Troubleshooting. It will show you how to locate the message(s) that describe the problem, then help you fix it. If that doesn't help, post back with details, including all the messages, your setup, what you've done, and the results.

Cannot see items in my trash bin sice upgrading to mountain lion

cannot see deleted items in my trash bin,since upgrading to mountain lion,it seems to delete items straight away.

Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

I've upgraded to mountain lion and now cannot use microsoft office--what happened?

I've upgraded to ox Mountain Lion and now cannot use any of my Microsoft office software. What happened?

It appears that you upgraded your computer to Mountain Lion and were using Microsoft Office 2004. In the short term, if you need to open and modify Word files, go to the file in the Finder and Control-Click on it. A menu will come up: go to Open With... and select TextEdit. This should allow you to open, modify and save the file for the short term.
You can do the same trick to open Microsoft Excel files in Preview and print them; but I do not think you can modify them in this way.
Workarounds for Microsoft Office 2004 since upgrading to Mountain Lion:
1. Upgrade to Microsoft Office 2011. This version works in Mountain Lion. However some of your legacy 2004 files may convert badly.
2. Restore the version of OS X that you were using before Mountain Lion.
3. Partition your hard drive and/or attach an external hard drive and install Snow Leopard on it and use the 'dual-boot' method of booting into Mountain Lion when you need it and booting into Snow Leopard when you need to run your PowerPC applications such as Microsoft Office 2004.
4. The method I use, which allows me to run my PowerPC applications concurrently with Lion: I installed Snow Leopard (with Rosetta) into Parallels 7 in Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?

After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?

Numbers is a spreadsheet program and FileMaker is a database program, so you probably can't use Numbers to open them unless you had first exported them from FileMaker in a spreadsheet-compatible format.
If you upgraded from 10.6 Snow Leopard or earlier and your old copy of FileMaker won't open anymore, it might be a PowerPC application that is not compatible with 10.7 and later. If that is the case, to work with your FileMaker files you should upgrade your copy of FileMaker to the latest version, which seems to be FileMaker 12.

After I upgraded to Mountain Lion my ICal will show event times in day, month and list format but not week format. I can click get info to find out the event time but that is cumbersome. I checked the box to show event times in preferences but no go

cannot get times to show on my events in week format since I upgraded to Mountain Lion. I move the event up or down to change times and nothing shows on the event frame like it did with Lion.
I checked preferences and cannot seem to remedy this. Does anyone else have any ideas? Is there sometihing I need to set or is this anot
her bug?

cannot get times to show on my events in week format since I upgraded to Mountain Lion. I move the event up or down to change times and nothing shows on the event frame like it did with Lion.
I checked preferences and cannot seem to remedy this. Does anyone else have any ideas? Is there sometihing I need to set or is this anot
her bug?

Upgraded to Mountain Lion - now cannot write to ext. HD

I have a strange issue. Having recently upgraded from Snow Leopard to Mountain Lion - I was first presented with an NTFS issue whereby my system would not mount or recognize any hard drive formatted NTFS. After some extensive research online, it was discovered that there was a conflict with two third party utilities / preference panes, namely, NTFS-3G, and Mac Fuse. I have deleted those two preferences and all associated files - they have been completely removed and uninstalled from my system. I now am able to mount and read NTFS drives, however, the one drive where I have been keeping all my movies / TV content, can now only be READ. In other words, I cannot copy files to it, nor can I create folders, etc. What happened that I can no longer write to this particular drive? I had no problems while I had Snow Leopard on my system, but now that I have upgraded to Mountain Lion....something happened, and I want to fix it. Please help if you have anything useful for me.

http://fpdownload.macromedia.com/get/flashplayer/pdc/11.3.300.271/install_flash_ player_osx.dmg

Lost SD card files for Final Cut after upgrading to Mountain lion

I use a 2010 Mac Pro with a My Book external. I copy all of my SD card recordings onto the external HD until I am ready to use them in Final Cut. Then I log and transfer straight from the external. I just upgraded to Mountain Lion and now I can no longer log and transfer those files that i previously added. I just now copied a new recording onto the External and it is doing the same thing. When i open the folder of the recording, all that is there is the AVCHD file. I can log and transfer straight from the card, but not from the copied files.
Why would this happen and how can I fix it? I need it right now and cannot do anything.
please help and thank you!
Melody

It was Snow Leopard. I didn't know you can make a clone, I've never had to do that in the past, have never encountered anything like this before, so I didn't even know that was an option. Guess I screwed that up.
I use Final Cut Pro 7 and a 6TB firewire external, the computer itself has 2 internals that are 1TB each. I do all of my work off of the external, I thought that it was the problem because what i need to use is already on the external. So I took a SD card that I haven't copied onto the external, plugged it straight into the computer and tried it from there, it's the same no matter where I go with it. FCP will take it in log and transfer only off of the card itself, but if you just double click on the card "no name", all it shows is a QT, nothing else. I have read all day about this exact problem others are having but cannot find a solution. I even saw a youtube that a fellow made about how he was on the phone with apple all day long and still got nowhere. I sure wish I knew this beforehand because I never would have bothered to upgrade. Everything I read was about how Mountain Lion has caused it and sure enough, it all matches what I have dealt with all day. The only thing I know to do is to wipe it off and start over with SL. I hate to do that but I really need those files and cannot use them at all now.
The reason I have a firewire external is because I was told by someone at a TV station that knows Final Cut to make sure that's what i used.
thank you for helping.

I want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help

want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please

If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards.

After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w? How can I get this set up to print?

After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.

From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5)

SD card cannot be formatted or written to since upgrade to Mountain Lion.

Similar Messages

Maybe you are looking for