SD card help.

Hello. I have recently got an mp3 player. I got an SD card for it. I put the sd card into my computer. It makes the sound saying that I put it in. I don't know how to put stuff on it or get into it. Please help!!!
This question was solved.
View Solution.

For Windows computer, please open Windows Explorer (or Files Explorer), the SD card will turn up as a drive (like a pendrive - USB thumb drive) and you can do what ever you like, very similar to a drive. One note: do not format it on computer, this may my not work on your MP3 player.
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • I bought a ipod 4th gen and when i try login in with my apple id it says my security pin is wrong but its the 1 from the card help!!

    i bought a ipod 4th gen and when i try login in with my apple id it says my security pin is wrong but its the 1 from the card help!!

    Contact iTunes.  See the iTunes Store Account and Billing topic of:
    Apple - Support - iTunes

  • Does an upgraded graphics card help stability within FCP?

    I have been having some issues, working on a documentary about two hours long shot on Sony EX-1. The timeline contains a mix of footage (24 1080p, 30 1080p, 24 720p, 30 720p) all rendered to 30fps ProRes 422. No effects at this point, mostly just the transcoding during render.
    It crashed when I export through compressor to DVD, and will not render the whole project without crashing. Sometimes, when I select just a portion of the project to render, within the main timeline, once it is done renedering that section, it looses the rest of the render for the entire project.
    All this points me to some hardware issues, probably ram, but i have been advised to purchase a high end graphics card to carry the burden of exporting. (currently using the stock ATI Radeon HD 2600) As far as I have known, a graphics card holds no bearing on this process. I know a new graphics card helps a lot in Motion, AE and such, but I am only concerned about editing in FCP at this point.
    Thanks for any thoughts you may have.

    Are you mixing formats and resolutions in the timeline? If so, you might consider converting all the the same format before editing.
    Try exporting a selfcontained quicktime and then bringing that quicktime into compressor.
    Oh yeah, make sure you don't have any cmyk graphics.
    Message was edited by: Michael Grenadier

  • HT2731 how can i install free application in my iphone 4s i am a student and i haven not a credit card. help me

    how can i install free application in my iphone 4s i am a student and i haven not a credit card. help me

    There are instructions on this page for how to create a new account without giving a credit card number : e.g. select a free app in the store and click on 'create Apple id' when 'buying' it

  • Got a refund but to my iTunes account when i bought it with my credit card help?

    bought a game on mac os x app store and they gave me a refund but apple put it on my iTunes account when i bought it with my credit card  help!!

    Check if your credit card has been refunded

  • I am not being able to create my apple ID as my card details are not being accepted by the app store. i tried with my visa card as well as master card. help me out to solve the problem..

    I am not being able to create my apple ID as my card details are not being accepted by the app store. i tried with my visa card as well as master card. help me out to solve the problem..

    Were the VISA and MasterCard issued to you by a bank in the country where you reside and do they have a verifiable billing address in the same country?
    Or are these debit cards that you bought in a local store. Apple does not accept debit cards that you bought.

  • I can't use my VISA card - help please

    Hi, I have a normal debit card which I use all over the internet, abroad etc. But suddenly now, this one doesn't work. It keeps me saying that my card is not a registrated card in the Czech Republic, and so it does also with my travelling debit card.
    Do you think this is just a system failure becouse the czech iTunes service was started on Thursday?
    I had a problem even with signing up to the Czech iTunes, becouse when I got to my card and billing information, when I wrote my card # and the 3-digit code, a dialog box popped up informing me that iTunes servers cannot be connected - so then I choose NONE as a payment method, but now this is happening...
    I beg you for any help, thanks.

    To clear your Balance and Change Country...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Data acquisition and generation with PCI-MIO-16E-4 card help!!!!

    I'm using a PCI-MIO-16E-4 card with labview7 (in using DAQmx)and I
    would like to draw a frequency response.
    My problem is: my program can run correctly in low frequency but, it
    can't work correctly in high frequency (after 2KHz the signal is
    For verifying my program: I only try to generate and acquire a sweep
    sine. I constate after 2KHz the sine I read dosn't resemble to a sine
    I wrote.
    Can you say me where is the problem?
    Thank you.
    Le Trong Thao.

    "Dr. Imad" wrote in message news:<[email protected]>...
    > my understanding is that you are generating a sine wave (on one of the
    > anlogoutput channels) and you are trying to read the signal.
    > Since you can verify the signal at low frequency, but not at high
    > frequency, it looks like you should increase the scan rate of the data
    > acquistion (if you can, set it to 10 times the signal frequency)
    > You can also use an oscilloscope to verify the signal is what you
    > really generated.
    Thank you for your response.
    I've tried to do it, and I've tried several other possibilities but it
    doesn't work correctly.
    In fact, I think the problem is in my program. Do you have a program
    that works correctly? I f
    ound examples in the help but they don't run
    Le Trong Thao.

  • Itunes, family share, gift cards help

    My son received an iTunes gift card for his birthday (he is 10).
    we are on the family share thing & I am the organizer. I pay for everything...
    I have to approve to buy his purchases. So I added the iTunes gift card to my account.
    And there it sits.
    I have approved several of his purchases yet it does not come out of the $50.00 account credit.
    The approved purchases are being charged to my credit card that is tied to my account.
    How to I fix this? Is it possible? I want it to come out of my iTunes credit of $50.00 not my credit card?
    I am starting to assume that there is a different way to have redeemed the iTunes gift card that would of gone directly to his apple ID yet I would still have to/ be able to approve all purchases.
    Thanks for you help in advance folks!

    Hello Nathan,
    Thank you for using Apple Support Communities. 
    Here is an article that provides information on purchases and payments within Family Sharing. Particularly notice the sections "Making purchases" and "Approving purchases with Ask to Buy". 
    When a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card. 
    You can turn on Ask to Buy to require approval for purchases initiated by any family member who is under 18 years old.*
    Family purchases and payments - Apple Support
    Jeff D. 

  • Will Graphics Card Help Aperture on Mac Pro?

    I've been using Aperture for many years on a variety of Mac hardware. I have 5 or 6 image libraries, ranging in size from 50gb to 250gb. I have no referenced images, do not use "faces" or other CPU-intensive features, and often perform tasks which reportedly improve Aperture performance (deleting caches, repairing/rebuilding libraries, defragging hard drives. deleting prefs). While these tricks often result in a snappy experience on relaunch, Aperture returns to its sluggish ways after a few minutes of work.
    My workflow is very simple -- I plug in my camera, download photos to the HD, and then edit them, which consists of adjustments such as exposure, white balance, sharpening, rotating, cropping. I don't do much retouching, red eye, or other fancy editing. Occasionally I use the "external" edit feature to retouch in Photoshop. I shot for many years with a Canon Rebel, 14MP I believe, and recently got a Nikon D800. I am finding the performance going through D800 raw files (not even editing, just flipping through them) unacceptable. For example, if I go to hybrid list/preview view, and press the "down" key 10 or 15 times, by the 5th image, there is a very noticeable lag, and often the display beachballs for 10 seconds or more before it gets to the bottom of the list. Basic tasks such as cropping or rotating often lock the display for long periods of time.
    For many years, I blamed Aperture's awful performance on my hardware. I worked on a series of Mac laptops. Although I usually had the latest hardware, they were no desktop. Recently, I bought a Mac Pro with a 3.2GHz Quad-Core Xeon processor, 16GB of ram, an OWC SSD (for the system -- the libraries are on a 7200RPM drive), and a ATI Radeon HD 5770 graphics card. I was dismayed to find out that Aperture is STILL unbearably slow. If I can't simply flip through some photos on a top of the line Mac Pro, what is this program good for?
    My question now is, would I see a significant performance gain if I were to upgrade yet again to a faster graphics card, such as the Radeon 7950? I've been reading up on these cards, and it seems like native support is coming in 10.8.3. While I hesitate to pour more money into my quest for a useable Aperture system, I wonder if this would finally show some significant performance gains. I've read conflicting reports from other users who've upgraded the graphics card. Is the advantage mainly for 3D or gaming applications or would this help Aperture too?
    Thanks in advance for any replies!

    In the past Aperture has been very GPU-dependent. The very best G5 tower would bog on Aperture unless the stock GPU card had been upgraded. I expect current Aperture also to benefit from a stronger GPU but I do not have absolute info on that. And your existing 5770 is not a lame card.
    I know 16 GB RAM seems like a lot, but with D800 files and an Aperture/Photoshop workflow you may still be paging out to disk. My Aperture/Photoshop workflow paged out at 8 GB RAM with files 1/3 the size of the D800 files.
    You should evaluate whether or not you have adequate RAM:
    Look at the Page Outs number under System Memory on the Activity Monitor app before starting a typical Aperture/Photoshop work session and write the number down. Recheck the Page Outs count after working for a few hours and write the number down again. If the page outs change (manual calculation of ending page outs number minus starting page outs number) is not zero your workflow is RAM-starved.
    Ignore the pie charts and other info in Activity Monitor because they are often misleading regarding RAM usage. For RAM analysis, count page outs.
    If your test shows that page outs increase at all during operation you should add RAM. RAM is dirt cheap and use of additional RAM a very desirable characteristic for an Aperture/Photoshop workflow. If it was me I would double to 32 GB RAM and set PS (PS Preferences/Performance/Memory) to use 16 GB of RAM.
    Hard drives slow as they fill so make sure none of your hard drives are overfilled. I suggest 70% full as an arbitrary maximum but even less full is preferable for speed. If your Library drive exceeds 60% full I suggest setting a RAID 0 array on two or more identical drives to get extra capacity and speed. Of course pay careful attention to frequent Library backup.
    Some apps like browsers are notorious for "leaking" memory so when doing serious images work keep non-essential applications closed. A SSD drive for boot helps because when apps open in just 3 seconds there is no reason to keep extraneous apps open.
    P.S. I strongly recommend that original images be fully backed up before importing into Aperture or any other images management application.
    P.P.S. Makhe sure you have a properly set PS Scratch Disk assigned on a fast underfilled drive, and empty the scratch disk routinely.

  • Mac Pro 3, 1 Upgrading Graphics Card Help!

    Hello to all and I first apoligize before hand incase there is a similar post.
    I am currently in the mix of getting myself a new graphics card and upgrading the RAM I have on my early 2008 (3, 1) Mac Pro and dont know what I am looking at.
    My current specs are as follows:
    Model Name: Mac Pro
    Model Identifier: MacPro3,1
    Processor:  2 x 2.8 GHz Quad-Core Intel Xeon
    Memory:  4 GB 800 MHz DDR2 FB-DIMM
    Graphics:  ATI Radeon HD 2600 XT 256 MB
    Software:  OS X 10.8.2 (12C60)
    I am currently having issues with not waking up from sleep and the performace with the graphics card rendering and fps in games are very poor. Tired of having all of my video settings on low.
    I play League of Legands, Dota 2, Portals, CounterStrike . . . etc. There are a lot of different options now for cards than ever before but I am looking to stay within a budget. For the graphics card I am not looking to spend over $400 and would love to find something even cheaper than that. I have researched many of the forms within, apple insider and as well have talked to a senior advisior with apple. She recomended the Nvidia Quadro FX 5600.
    I specificly want something at or above 1.0 GB VRAM to handle my 2 Displays which are:
    HP 2711:
      Resolution:          1920 x 1080 @ 60 Hz
    DELL 2405FPW:
      Resolution:          1920 x 1200 @ 60 Hz
    If anyone can point me in the right direction as to what to buy for a graphics card because I am not that well educated in that side of the computer. I can handle upgrading the RAM by myself but would also like a little push.
    Any help/response would be great!

    The "regular" Apple Mini Displayport to Single-Link DVI adapter (is not an ACTIVE adapter) is US$29. for displays up to 1920 wide.
    Third party Mini Displayport to Single-Link DVI adapter ACTIVE can be had for about US$35 from Amazon or NewEgg. for displays up to 1920 wide. 4071ZXA/ref=sr_1_4?ie=UTF8&qid=1362369627&sr=8-4&keywords=ACTIVE+Mini+Displaypor t+DVI
    The Apple Mini Displayport to DUAL-Link DVI ACTIVE Adapter with additional power from an attached USB cord is US$100. required for for wide displays.

  • N80/N73 Memory Card help

    Can anyone pls tell me, the maximum size of memory card N80/N73 can take. Cheers

    Hi joccy
    For N80 maximum size is 2GB, whereas newer Nokia such as N95 will take 4GB
    Sandisk are confident enough to offer 5 year warranty on their products
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Dual Displays, and Dual Vid Card Help Please :-( 30'' Cinemas

    Hello all, I just recieved my 30'' Cinema Displays from the Fedex man this morning and am having a bit of trouble getting everything up and running.
    My System is:
    Windows XP Home
    AMD Fx-57
    2GB Corsair XMS DDR 400 Ramm
    Asus Asi-8 Premium Board
    Dual Evga 7800 GTX 256mb PCIe x16 Cards
    Currently at my disposal to make this work I have:
    2x 30'' Cinema Displays
    2x Evga Nvidia 7800 GTX 256mb PCIe x16 Cards
    I say this because no matter what I do I cannot get both moniters to function properly.
    At first I had had both cards in my desktop running SLI, and I attempted to plug in the monitors, neither would turn on when I booted up the pc, I tried every array I could possibly think of to even get some activity out of both, or even a SOLO monitor with the cards on SLI Mode.
    Eventually I just grabbed one of the cards out, so that I was running on a single 7800 GTX card.
    WHAM both monitors booted up normally heres the problem Im now faced with, in this mode I can set one monitors resolution (whichever monitor I have set as primary) to the normal maximum allowed by the 30'' Cinema.
    The problem comes when faceing the other monitor which is stuck at 1280 x800, giving a very wierd look and panning feel.
    Is there any way at all to make theese work?
    I dont care If i have to go down to 1 card, or even go buy a new card
    I just want both monitors to be running at high res.
    Thanks a bundle,

    You have to look at the specs for your video cards, but it looks like your video card only supports one dual-link DVI and the other connection is single-link DVI. You need a card with dual dual-link DVI outputs. I believe the high end ATI X1800 and X1900 video cards support this.
    I'm not familiar with SLI to help there.

  • Wireless Adapter Card Help.

    I recently moved back to my parents house after living away at university for a year, since then they have changed the ISP from AOL Broadband to BT Infinity and I found my wireless card doesn't seem to be compatible. Whenever I turn my PC on I don't know if I'll be able to get an internet connection and if I do it'll only last about an hour, at which point it disconnects and won't reconnect until I restart my computer.
    I need some help to see if anyone knows why it's doing this and if it is a problem with the card can anyone suggest a good wireless card.
    I need a card compatible with my PC Specs, BT infinity and good enough for online gaming e.g. World of Warcraft, League of Legends etc.
    PC Specs:
    Motherboard: ASRock K10N78FullHD-hSLI
    CPU: AMD Athlon(tm) II X2 250 Processor 3.00 Ghz
    Graphics Card: GeForce 9400 GT
    RAM: 4GB
    OS: Windows 7 Home Premium SP1 64-bit
    I have tried two wireless cards both were TP Links, though I can't remember the model, and neither have worked with my internet.
    Thanks in advance for any help.

    As you have already tried two cards and neither work buying a third without confirming that it is your WiFi card causing the problem may be a waste of time and money. If possible i would try to use one of the cards you are having issues with in another computer and confirm you get the same issue. Ideally try this with the PC in the same place as the problem one and also try it in the same room as your home hub. If you card works on the other machine then some more investigaion would be needed to find out what is causing the problem on your PC.
    If you just want to buy something new then i have found this pair to work well together, the connection is very stable, the Antenna is optional, but has helped me get even more range out of the card.
    TP-Link TL-WN951N Advance Wireless N PCI Adapter
    TP-Link TL-ANT2405C 2.4Ghz 5dbi Indoor Omni-Directional Antenna
    I bought the pair of these off Amazon for just under £30, so not the cheapest but they have worked well for me.
    A brief look at your motherboard spec suggests it has the required PCI slot, but i'll leave that to you to double check

  • Dlink Network Card Help Please

    At my school in the radio and tv classes we use the network to tranfer video files and such. One of the G4s built in ethernet card has broken pins. My teacher bought a Dlink DFE-530tx+ and I'm in charge of getting it working.
    I've installed the PCI adapter, and I installed the drivers. The problem is I can't get the card recognized in the Network Preferences. Has anybody had any experience with this card?
    Any help would be great, thanks

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect OK?
    Did the iOS device connect OK before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>General>Dae & Time and make sure the time. date and time zone are correct
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

Maybe you are looking for