SD Card in CD Port

I have put an SD card into my CD Port. Is there any remedy short of sending the iMac into Apple? I can't reach it with a small probe.

Have a look at this short video - looks easy with a bit of card:
http://www.youtube.com/watch?v=hpwDfpH4hR0
Best to turn the Mac off while you do it

Similar Messages

Hi, we have a G5 Blade server running OS X 10.5.8 with a dual Fibre Channel card. The OS does not read the card and cannot establish connection to the RAID controller. I have tried to move the card to another port with no luck. Ran all the updated softwar

Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone advice

Hi,
Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
The card should appear in the System Profiler under Fibre Channel and PCI Cards.
All the best
Beatle

Problems configuring a port in niPXI-6509 card as input port using static DIO Register Level Programmer maual

Hello ,
I am using a ni PXI-6509 card for my application. Since I have to compile my application in Interval Zero RTX, I am using the static DIO Register level programming using VISA. I have successfully configured the card to do output on port0. But when I attempt to comfigure another port1(not the same as output) I can successflly configure it. But when I send 5V through the corresponding pins I donot get a value 1 in the Data register for that channel.
the following i did to configure as Input...
1) IO Select register set to 0 (for input as the manual suggests)
2) read from IO data register.
Do I need to do anything special to configure as input port.
please suggest...
Thanks
Kuchi

Hi Sathish,
Given how much blatant, undisclosed, and unrepentant
cross-posting [1] [2] [3] [4] [5] you've done to ask this question, I
gave you the benefit of the doubt that you were new to the NI forums
and didn't understand the etiquette of this community. However, looking
at your profile, you've been around just over 8 years! How can you be
so selfishly impolite?
To your credit, you at least searched the forums to find (somewhat) relevant to which topics to reply, but as you said you 'tried the entire NI Site', I'm surprised that you missed the DDK home page [6] that has a link to the M Series register map.
[1] Re: m series register programming in straight C
http://forums.ni.com/ni/board/message?board.id=90&message.id=1644#M1644
[2] Re: Problems configuring a port in niPXI-6509 card as input port using static DIO Register Level Programmer maual
http://forums.ni.com/ni/board/message?board.id=90&message.id=1645#M1645
[3] Re: Problem with writing to registers
http://forums.ni.com/ni/board/message?board.id=90&message.id=1646#M1646
[4] Re: Is there a Register Level Programming manual for NI 625x PXI
http://forums.ni.com/ni/board/message?board.id=270&message.id=7661#M7661
[5] Re: Where Can I find information about register level programming the PXI 6259?
http://forums.ni.com/ni/board/message?board.id=250&message.id=53551#M53551
[6] Register Level Programming for OEM Customers
http://digital.ni.com/express.nsf/bycode/exyv4w?opendocument
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

Adapter card for firewire ports

iMovie recognizes my camera but will not download. Genius Bar succeeded using an adapter card with firewire ports with assumption that port on computer was bad.
I am searching Apple Store and cannot find this adapter card. What would it be called?
thanks for help

If you mean the online Apple Store, it doesn't currently carry any adapter cards of that type. They are available from many other online vendors. But why not buy one exactly like the one the Genius used, at the store where s/he used it?

How can collect the data from laptop sound card and serial port at the same time?

I'm working on a project, I need to collect the data from laptop sound card, and also from serial port at the same time.
The attachments are my VIs for sound card and serial port communication, I'm wondering that can I combine these two VIs together? Or can I run these two VI at the same time?
Thank you!
Attachments:
AC_Radar_Receive.vi ‏46 KB
RadarAudioPlug.vi ‏774 KB

A smarter way is just to put all your code in the same VI.
Two parallel loops if rates are different.
Attachments:
RadarAudioPlug.vi ‏450 KB

Using a PCI card INTERNAL USB port

Hello to anyone reading this !
I've just installed a PCI card in my G5 in order to add more USB ports. When I started searching for one, i was surprised to see most had an internal port, I couldn't really see the use of that. A friend told me it can be used on PCs to plug an extension towards a free port in front of the main unit.
Considering i can't do this on my G5, I was wondering how to take advantage of this internal port and I'd like to know if I can plug my USB Bluetooth adapter, as it doens't need to be visible and it would free one of my external ports. The question is, are there some security restrictions regarding what you put INSIDE the unit? Isn't it too hot inside to leave the bluetooth key or anything else that is not designed to be inside?
Does anyone have any advice?
Thanks in advance
iVince

With all the airflow in a G5, I don't think heat will be a problem, but a Bluetooth unit probably will not be useful inside a shielded metal case. The Apple Bluetooth card connects to an antenna wire that goes outside the shielded section, but I don't think there is any way to connect that wire to the USB Bluetooth module.

SD card in SDXC port

The information booklet, "Everything Mac", says that the SDXC port takes SD cards, but the computer doesn't recognize that anything is plugged in. Am I missing something?

Check if it is inserted all the way properly, check if the "lock" tab on the SD card (top left) is on. Card might be having formatting issues, run Disk Utility and see if the card at least shows up on the left pane.
SDXC slots accept ANY SD cards (sd/(micro/miniSD* w/adapter)/SDHC/SDXC), so you're not missing anything.

Bridge between airport card and ethernet port

My son wants to access the internet through the ethernet port to connect his xbox 360. My airport extreme base station is upstairs and my powermac g5 is in the basement and connects to the internet through the airport network (airport extreme card to base station). One of his friends says he can configure a bridge between his wireless card and his ethernet port on his windows computer and was trying to do it on my mac. Can a bridge be configured between the airport extreme card and the ethernet port on the g5 which will allow an ethernet device to connect to the internet? Any advice will greatly appreciated. Thank you.
Larry

I have used an external ethernet bridge in the past. What I am wondering is: How can the airport card be configured to create a bridge to the ethernet port on the computer, so the game console could be connected to the back of the g5 with an ethernet cable and then connected to the tv with a/v cables. Do I have to use some external device to provide an internet connection to the game console or is there some way to share the connection from the airport card to the ethernet port?

Damaged GFX-card or AGP-port? (Fx5700 Ultra)

Hi
Before I decide to return my gfx-card to the store where I bought it I thought I'd ask you experts what you think of the problem. I would hate to get a new card back and still have "the problem". This is what happened...
Few days back decided to play some CounterStrike: Source, as I've done hundreds of times with this comp. and setup before. Suddenly my FPS drops to 5 and ping goes up to 600+. I checked Task-manager and CPU-usage was going from 20% to 99% with like 1 second intervals. Rebooted etc. and decided it was a problem with CS:s. I tried watching a movie and same thing happened (CPU going crazy and FPS dropping/topping all the time).
I then tried drivers, update MB etc. Nothing worked. So I put in my old GFX-card instead, a GF 4400 Ti, and everything worked like a charm! Video ran smooth and rames ran ok (obviously not as good as with the fx5700). I tried installing my FX5700 again, thinking it might have been a temporary thing, but the problem was/is still here.
Now my GF5700 Ultra ran at 8x AGP, and the old 4400 Ti only ran 4x AGP. So what do you guys think the problem might be ... GFX-card breakdown or AGP (MB) that no longer can handle 8x AGP (for whatever reason)?
Sorry about the long post but I thought I'd give as much info as possible in my first post
and no, no overclocking of any kind have been done. I tried to downclock the 5700 Ultra but problem stayed the same.
Anyone wanna give it a shot or do you need additional info?
Thanks

yeh ok. I have kind of found the problem, but will post my PSU-specs first for you to comment (I can always buy a better one anyway)
300W
+5V - 30A
+12V - 10A
-5V - 0.5A
-12V - 0.8A
+3.3V - 14A
+5V grnd - 2A
My GFX-card is broke tho. I just tested it on my buddies computer, who has a 400W PSU, and he got EXACTLY the same problems as I've experienced. What I find particularly odd tho is that I've been having mouseproblems for about 1 month - mouse going crazy once every hour (differs) by lagging ALOT (like the CPU didn't give it any room to even calculate movement etc.). Also I could not boot my computer when mouse was connected to the PS2-port (only USB worked). When my buddy tried my GFX-card he got not only the exact same graphical bugs but his mouse went crazy too - lagging and wouldn't boot if it was connected to PS2-port.
I find this very odd but atleast it proves that the GFX-card is the problem (but how can it be creating PS2-port shutdowns?).
Think I should invest in a new PSU to be on the safe side tho? I will return my GFX-card to get a new one ofcourse. Hope this is not a reaccuring thing for this model.
Thanks

Graphics card covers sata ports on K9N6PGM2-V. How to access Sata ports?

I have http://www.ebuyer.com/product/148025/show_product_overview and http://www.ebuyer.com/product/160711 but when I install the graphics card it covers the sata ports. How do I access them? Is it designed that way and normal to access the sata ports another way?
Thanks.

Didn't you check the CPU support list before getting the CPU? Only the Ph II X4 900, 905, 910 are in the list and that list is updated to the latest BIOS 9.7 2009-09-18. Just because the MB supports AM3 does not mean it will support all of them.
You have an economy/value MB and they typically don't have the features and support of the more expensive full featured MB's.
CPU support list:
http://www.msi.com/index.php?func=prodcpu2&prod_no=1472&maincat_no=1
Edit: From MSI product description page.
CPU
• Support socket AM2 for AMD® Athlon 64/Athlon 64X2 CPU / AM2+ for AMD® Phenom CPU. (95W only)
• Support socket AM3 CPU. (65W only)
Please refer to CPU Support for compatible CPU; the above description is for reference only.

GE cards supported for port- vlan based EoMPLS on 7600/sup720

Hi,
Can anyone explain/point where I can find de proper documentation where I can find the support for port- vlan based EoMPLS support cards on a 7600 with a sup720 engine on the CCO site ?
WHich GE port cards are supporting EoMPLS and which GE cards will support it not.

try
www.cisco.com/go/fn
-Waris

Sd card reader & USB port (right side only) not working

I recently purchased a Macbook Pro 15" retina display with OS Moutain Lion. The SD card reader and USB port on the right side of the computer do not work. I've restarted the computer numerous times, tried to reimage the computer with the Control+R during restart (didn't allow for update because Mountain Lion was loaded on the system), and downloaded with the latest updates but they still do not work. I am currently deployed to Afghanistan so Apple Support calling me back isn't going to work. Any help would be appreciated.

Hello :
TNX for your reply.
Unfortunately, I do not own a 2 gig mem card to test with. What perplexes me is that when I watch device manager and open properties boxes for the USB dev, SMSC-2228 dev, and the newly created disks, the Win XP drivers do indeed load, but watching it do so is sloooooooowwwwwww. Slow as in 3 - 5 minutes for the win drivers to load in place. Funny thing is, an xD mem card or Memory stick initialize, set up properly in a matter of at most 5 - 10 seconds or so. The only card type I have a problem with is THE MOST COMMON ONE, the SD card. Maybe a Micro/Mickey soft thing? Some info I found on the SMSC controller claims it supports the larger sd card sizes, so I think this is a Micro / Mickey soft thing. I guess I need to search for some better drivers somewhere.
TNX for now

SD Card Slot / USB Ports

Good morning,
I have a....
Model: G62-b29SA
Product: XF339EA#ABU
Serial: [Personal Information Removed]
I have had the notebook for the last 5 years and so far the notebook has been amazing and never ever let me down, however....
Recently the SD card slot on the left, no longer recognises any SD cards either size or brand.
In addition, the USB slots x 3 (2 on the left and 1 on the right) do not recognise any SD card reader with a SD in it.
** The top right and bottom left recognises my white SDHC integral SD card reader as the red light comes on, but then the red light goes off. Once off, "My Computer" recognises another drive, but when clicked, the notebook asked for something to be plugged in.
The USB port on the top left and top right, recognises my USB connected portable hard drive.
*** I have googled the condition and I have completed the following...
1. Right clicked and deleted ALL USB slots in device manager and reinstalled.
2. I have deleted ALL windows updates for 2014, in case these updates dis-armed the SD card slot and USB slots.
3. I have also downloaded and updated the BIOS with the latest edition from the HP.com website.
I am now at a loss, with the SD card reader slot not recognising any size or brand SD card and the USB slots do not recognise any SC card reader plugged in, but read my external hard drive.
Could I ask if anyone has any suggestions or maybe downloaded the drivers at the date of the original purchase.
Kind regards
Gary...

Try reinstalling the media card reader driver software for your operating system from the download section of the support portal for your notebook.
Windows 7 (64-bit) media card reader software
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-83237-2&cc=us&dlc=en&lc=en&...
Your notebook has three usb 3.0 ports. Have you connected a device that draws more than 100mA to one of the ports? That could overload the port and make it inoperative. Some ports can be limited to 50 mA. It depends on the notebook's systemboard design. High power usb devices that are optionally powered by an external power supply should always be used with an external power supply. There are limits to the power capacity of the traces on the notebook's systemboard.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

IPad no longer recognizing CF card through USB port

I'm a photographer, Using a USB cable to a CF card reader, I can import and view my images via the iPad. This not only is easily done, Lexar's president has a video on Youtube demonstrating this.
I've used this feature regularly for several events.
However just recently the iPad has simply stopped recognizing the USB reader and said that there isn't enough power to do this.
So from 7/4-2010 through Friday,7/23 I was able to import images via this daisylink chain. Then on Saturday 7/24 I was no longer able to do this.
The iPad does seem to be losing battery power more quickly than when I first got it, so my assumption is that it is a mechanical thing and the iPad battery is defective.
Any thoughts? Please remember, this function operated smoothly for a month, and is described regularly in another company's marketing materials, and no changes to the iPad have taken place.

Have you tried making sure the iPad is fully charged before doing this? I suppose so.

My daq card PCI6025e' digital ports PA,PB,PC are in high state and cannot be changed even in MAX 2.1 testing panel and continuously output 5 volts even set for output.

my digital ports PA,PB,PC are in high state and cannot be set low even if it is set for outputs.
Thanks

The MAX utility is the closest to the driver level and will eliminate software configuration as a possible issue. Please disconnect anything that you have connected to the DIO lines.
Use the MAX test panel for your DIO lines, configure them as outputs, and set them to a low state. Use a multimeter (DMM) to observe the line state. If it is still high then you may have a problem with your hardware. If this is the case, I advise calling National Instruments support and investigate a possible RMA (repair).
Best Regards,
Justin Britten
Applications Engineer
National Instruments

SD Card in CD Port

Similar Messages

Maybe you are looking for