SD CARD NOT FOUND

I bought a new Nokia Lumia 520 last week with a new SD card and when inserted the phone reads no SD card found.Can any one out there help me explain how to activate the 520 so it read or find the SD card .
Many thanks.
Maxwara

Various suggestions HERE ..
.. also see THIS

Similar Messages

Sim Card Not Found

Each day at random times my phone goes out stating Sim card not found. i was hoping there was a fix in todays update but of course no update. i have been travelling so i cannot back up etc. I have done the reset, the hard reset, and plug into the electric cord, and eventually it does come back but i miss the calls, messages etc. which happen durring this period. What is the fix for this?

If it is an iPhone 4 it is on the side. Bend a paper clip, insert it into the hole, push and the tray will come out. Pay attention to how the microsim is seated and be sure not to bend or damage the tray.

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!?

Network card not found after new installation [SOLVED]

I broke my filesystem on my Asus UL80V series laptop in trying to solve problems related to the latest glibc update, so decided to do a clean re-install. I had an installation disk at hand: 2009.08 with kernel 2.6.30.4-1 (which is supposed to have the module for my ath9k network device). However after a successful installation (including all the files from base-dev), my network device is not recognised:
dhcpcd: eth0: interface not found or invalid
although network connectivity (wired and wireless) worked perfectly before the installation attempt.
This happened yesterday (17th) and I have been scouring the web since trying to find out what the cause of this problem is, without luck.
I also burned a new installation CD with the latest stable version, but no luck there, either! Got a message at the beginning informing me that the install requires 64 Mb memory, although my laptop has 4 Gb.
I should say, the device is there and working:
lspci | grep Net
gives
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
I also did
modprobe ath9k
just to make sure. No luck.
Any help will be appreciated.
thanks
thea
Last edited by thea (2012-07-23 23:59:16)

Argh, ip may not be around in the 2009 image really ;-) .. Use "ifconfig" instead..
But: I meanwhile cross-checked your ath9k: http://wireless.kernel.org/en/users/Dri … h9k_driver
and it does not sound encouraging for the kernel you have there.
The image is far too old anyway, if you ask me (would be a darn hazzle to get that uptodate I am sure). Pity you get that memory error with the 2011 one. Maybe check forums on that. Sounds very strange, I am not aware of any post I read.
If you can burn another CD, you can try the recent ISOs as well: http://releng.archlinux.org/isos/
Beware that the ones from July dont have the AIF setup anymore.

SIM card not found message?

Since upgrading to the 2.0 software my iphone has shown the message SIM card not installed. I have had to reboot the iphone to reestablish the connection. Has anyone else experienced this?

I have the same problem, I tried to change to the official provider in Belgium (having bought the phone in USA) but that didnot help either...
The SIM card is working in a normal GSM....

Sound blaster card not found when installing softw

Hi guys if any one can help me much appreciated. I have read alot of the forums and have tried creatives advice. I installed the drivers for my audogy 2 zs soundcard fine. It sees it in device manager as creative audigy audio processor wdm and i can see creative game port. My specs are
amd 64 3400
asues k8n-e deluxe motherboard onboard sound disabled in bios
ati 9800 pro video card
gig of corsair ram
logitech z680 5. surround
The problem i am having is installing the software for the card. When ever i click on the exe all it says is no soundblaster has been found on your computer. I am a IT guy for a phone company so i am not a noob when it comes to computers. This is the first exe i have ever clicked on and got errors over and over. After reading the forums with people that have the same problem why havnt creative put the software installs on there website so we can dl them since were having issues. I have tried all the steps on the forums and creatives tech support. If you can post the software standalone along with your updates it would be much appreciated. I get sound now utilizing my z680 speakers to there full potential. If any one can help me it would be appreciated thx.

Hey, try this: http://uk.europe.creative.com/support/downloads/
. Select Your Product : SB audigy 2 ZS
<B>2. Select Your Operating System: xp?!</B>
3. Select Your Language:
and so on....
or auto update http://uk.europe.creative.com/suppor...ID=033&OCXType=
I hope that helps!!!

Pismo and Airport card; Card not found

I just got an airport card for my Pismo. The computer cant see the card. What do I need to do to get it to work?
Specs:
PB Pismo G3
728mb Ram
OSX 10.4.11
Airport Card

I figured it out.
For those having the same problem, Make sure your card is installed correctly. The airport card DOES NOT go in the PCI card slot.
Read the correct instructions below.
1. Shut down your PB.
2. Pop open your keyboard.
3. Take off the heat shield.
4. You will see a small black wire just to the right of the PCI slot. This is your antenna.
5. Plug in the antenna to your card and slide the airport card ABOVE the PCI slot, with the serial numbers facing up.
6. Adjust the antenna wire to fit as you put the heat shield back on.
7. Power up and hit ok on the dialog screen saying airport card found.
8. Wait for wireless network to appear in your wireless network and then your ready to go.

AMD Radeon Graphics Card Not Found! Please Help HP Envy M6...

When I head into device manager, it shows that I have only an Inter (R) HD Graphics 4000 graphics card even though the laptop is said to have an AMD Radeon built in... I've upgraded my version of Windows but it doesn't make sense, why does this driver go away? I've reinstalled every driver there is for the AMD series... I can't get my laptop to detect the graphics card, has anyone had this problem? I've seen this on threads too but the answers weren't helpful at all because they just redirected the user with a link to another thread which isn't relating to a graphics card. Is there any way I can fix this so my laptop can detect my graphics card?
Note: When I run AMD's 'automatic driver checker', it CANT EVEN DETECT IT ... Please help me, there's just one too many problems with this laptop aside from the fact that it overheats like crazy.
Thank you,
Shehryar.

This is the picture that I've taken, you can see that the Intel HD Graphics 4000 is indeed there however, I found an unknown device at the bottom. There is NO information of this device, here is the 'info' for the unknown device:
Device type : Other
Manufacturer : Unknown
Location : On PCI Express Root ComplexUpdate driver will not work. I'll look for more but that's really it... Thanks Shovon_Khan!

Card not found, driver upd

It seems to be a common problem, but i have not seen an answer posted so i'll repost for everyones benefit.
i have an audigy 2 and when i try to update the drivers it says no audigy card installed on the system. well as we all know thats BS . anyone have an answer or fix?

Download the update file.
Extract it using WinRAR or similar program.
In the extraced (nt intaled) file there's a subdirectory "Folders". Run the setup program in that subdirectory.
Reboot when prompted.
At least that worked for me and the peron that suggested it. Seems a common problem.

Ethernet card not found?

Hello all
I'm new to Solaris. I have Solaris 8 for the intel platform and installed it successfully on an amd processor but it does not go out to my network. I can not ping my router or access the internet with the box. How can I tell if Solaris picked up my ethernet card <linksys 10/100 PCI> during installation and if it did not what possible steps would I have to talk in order to connect this box to my router and the network. Anyone can help?
Thanks all,

If Solaris detected the card at install, when it was defining your system, it would've asked for an IP address, whether you wanted to run DNS etc., and whether you were on a subnet, prompting for the subnet mask if you replied 'yes.'
Network cards seem to be the great jumping-off point for Solaris on the PC platform. I am trying desperately to find a NIC that 2.5.1 likes.
Good luck.

Satellite 2450-101: Wireless Card not found

Hello: I seem to be unable to make my internal wireless card working on this model. After reading few postings, i am not even sure if my model has a wireless card, altough I was told it does and reading manuals and simply observing the laptop, it seems so.
Can anyone confirm if this model (bought in Spain) has wireless card and how to set it up please? The little light next to the switch is dark, I have tried all possible in terms driver setup etc.
Thanks
Hynek

Hello
This unit is WiFi ready and please check in device manager if the wireless card is listed there. You can find it under network adapters.
Usually all notebook models with WiFi card have a WiFi label on the bottom side. Check it.
Bye

PCI-GPIB card not found in linux 2.4.22-1.2115.nptl Fedora Core 1

I am trying to install the nigpib driver on a Fedora Core 1 installation of linux (kernel 2.4.22-1.2115.nptl.) The installation script reports the following errors:
Your kernel appears to be configured properly to build NI-GPIB for Linux.
Do you want to proceed? [yn] y
make: `nigpib.o' is up to date.
Copied nigpib.o driver to modules directory /lib/modules/2.4.22-1.2115.nptl/kernel/drivers/char
Devices created.
Probing for PCI-GPIB.
No PCI-GPIB boards detected.
Do you have an AT-GPIB/TNT board installed? [ny] n
/etc/modules.conf is up to date.
Warning: loading /lib/modules/2.4.22-1.2115.nptl/kernel/drivers/char/nigpib.o will taint the kernel: no license
See http://www.tux.org/lkm
l/#export-tainted for information about tainted modules
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/char/nigpib.o: init_module: Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/char/nigpib.o: insmod /lib/modules/2.4.22-1.2115.nptl/kernel/drivers/char/nigpib.o failed
I have moved the PCI-GPIB card to the first PCI slot with no differences in the error messages I recieve. When I run dmesg I recieve the following information:
unable to get major 31 for gpib
unable to get major 31 for gpib
unable to get major 31 for gpib
unable to get major 31 for gpib
unable to get major 31 for gpib
Any help would be appreciated.

I have this same exact problem. I'd rather not disable USB 2.0, because I use it to transfer files to my MP3 player when in Windows.
I find it hard to "blame the BIOS" when it was working fine under kernel 2.6.7. Anyone know of another solution?
EDIT: Well it isn't the same "exact" problem. When I first boot into Arch, the usb mouse and keyboard don't work. I press and hold the power button on the machine to restart. The second time I boot into Arch, the usb devices do work. If I do a standard soft reboot and go back into Arch, the usb devices again don't work. I guess this is a hotplugging issue, but enabling it in rc.conf does nothing. The only permanent solution I can find is disabling USB 2.0 in the BIOS.

My iTunes account kept saying card not found but charged me 3 times

Someone please help me. My iTunes's account keep saying that my card didn't match the records and wouldn't let me buy anything yet I was charged 3 times for something I didn't even buy.

Hello Ashlee153
Open the iTunes Store and navigate to the payment information to verify the billing information. If you do not believe that the charges came from you, then report them to the iTunes Store.
iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/ts1646
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G.

Quadro K4200 card not found by Premiere 2014CC's GPUSniffer app?

The card is installed with current drivers and seems to be functioning fine. GPU Sniffer app reports:
--- GPU COMPUTATION INFO ---
Did not find any devices that support CPU computation.
This card is on the list of supported cards for Premiere Pro 2014CC.
The Premiere project settings show only the Software Mercury Playback engine as an option.
I have tried using a "cuda_supported_cards.txt" file with an appropriate entry to the folder
C:\Program Files\Adobe\Adobe Premiere Pro CC 2014
in an attempt similiar to the PremierePro CS6 "hack" but that did not work. I have since removed that file (it wasn't present at installation).
I am assuming that the card should work without modifying or adding such a file since it is on the list of supported cards.
Any ideas why it does not appear to be working?

it might be the driver install, could try updating/reinstalling and doing a clean install.

SD CARD NOT FOUND

Similar Messages

Maybe you are looking for