SD card not showing right memory space

I have inserted a 128gb memory card inmy z3 and saved loads of apps to it but its still showing 125gb of memory available on the memory card. It was also showing this amount of space before I saved anything on the memory card. Anyone know why its not showing the correct amount of available space?

Apps can be too small to make you notice a difference in card capacity, even large apps leave their large files on internal memory. I think you should try recording a long video or tarnsferring a movie from your PC to SD card and see how storage looks like.
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

Similar Messages

  • How do you change the drive that my Iphone backs-up to on my computer?  My first attempt to back-up and i received a pop-up stating that I do not have sufficient memory/space, knowing that I have over 120GB of free space...any ideas? thanks

    How do you change the drive that my Iphone backs-up to on my computer?  My first attempt to back-up and i received a pop-up stating that I do not have sufficient memory/space, knowing that I have over 120GB of free space...any ideas? thanks

    dave0915,
    iTunes stores your iPhone backups in the Library folder in your Home folder.
    iTunes places the backup files in these places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Create and delete iPhone, iPad, and iPod touch backups in iTunes
    http://support.apple.com/en-us/HT4946
    Regards,
    Allen

  • SD Card not showing after Mountain Lion Update

    This matter has been discussed for some time now in
    Apple Support Communities > Desktop Computers > iMac (Intel) > Discussions
    SD Card not showing after Mountain lion Update
    Since the update to Mountain Lion, the SD slot does not show up in Finder.
    Someone gave a fix using the killall in Terminal, and that worked only once.  I have not been able to get that fix to work again.
    The only saving grace for me is that my SD Card us is always from my Nikon camera, and Nikon ViewNX 2 software is able to see and read from the card.
    Killall may have worked partially in that I no longer get the error message telling me that I have removed the SD card improperly, and need to dismount it first.
    However, Finder still cannot see it.

    BrianForbesColgate wrote:
    Thanks, Barney ...
    Those are basics ... Been there, done that, first.
    Then you should hava posted all the troubleshooting you already accomplished.
    Does the card show up in System Information? Or is that another one of the "basics" you've already looked into?
    Does it show up in Disk Utility? If so, have you tried formatting it there to determine if it is a formatting problem?

  • Laptop computer HP Pavillion dv7 does not show sd memory card

    I put my 16 GB SDHC  class 10  new memory card  into my laptop memory card slot reader
    but the computer does not even show an icon for the memory card slot reader. When I pushed the card all the way in
    my Kaspersy Virus software asked me if I wanted to scan the new memory card. So it was recognised by Kaspersy.
    What to do? I am trying to download a firmware upgrade for a camera I own. I have dowloaded the firmware but cannot tranfer the file because the computer is not showing an icon for the memory card.

    Formatting in post #2 was removed. Reposting: Further details added as found: Selecting Device Manager | View | Devices by Connection and browsing down the tree shows: dv7-3060us -- ACPI x64-based PC ---- Microsoft ACPI-Compliant System -------- AMD PCI Express (3GIO) Filter Driver ---------- PCI Standard PCI-to-PCI Bridge 1394 ------------ OHCI Compliant Host Controller ------------ JMB38X MS Host Controller ------------ JMB38X SD Host Controller ------------ JMB38X SD/MMC Host Controller ------------ JMB38X xD Host Controller Examining details on above shows this: Device Class GUID {4d36e970-e325-11ce-bfc1-08002be10318} PCI bus 10, device 0, function 3 Any troubleshooting hints? Could a connector worked loose from the motherboard?

  • Mac Mini Early 2006 Mini PCIe SATA Card Not Showing Up

    I'm trying to add a couple of SATA ports to an early 2006 mac mini by swapping out the mini PCIe AirPort for a SATA card. This is the card I'm using http://www.startech.com/Cards-Adapters/HDD-Controllers/SATA-Cards/2-Port-Mini-PC I-Express-Internal-SATA-II-Controller-Card~MPEXSATA22I, problem is it doesn't seem to show up when installed in the mac. The card works perfectly when installed in a different machine.
    The AirPort card shows up fine when swapped back, so the connector's okay. But with the SATA card installed, System Profiler says the computer doesn't contain any PCI cards. I've tried resetting the NVRAM with no success. I don't even see an entry for the device it in the ioreg output, so I'm thinking there might be a power issue. Does the mac mini supply both 3.3V and 5V to the mini PCIe connector? Is there anything special I need to do to get this card to show up?
    Thanks.

    There a long thread about this on the 123MacMini forum.  At page three, they mention drivers (you need drivers, right?) and there is a link...
    http://www.123macmini.com/forums/viewtopic.php?t=22943&postdays=0&postorder=asc& highlight=pcie+sata&start=30
    Actually, that thread might refer to a different, but similar, card.
    Don't know if it finally worked.  Be very interested to hear.  (Not sure why Apple is/has always shunned eSATA?)

  • Blackmagic Decklink card not showing up in Playback settings

    Just upgraded to Premiere Pro CC - my Blackmagic Decklink card is not showing up in the Playback settings box.

    Hi Peter - thanks for responding - yes I did install the latest drivers - but finally found a thread that solved the issue.  Turns out Blackmagic installs the drivers in its own Adobe folder - but Adobe only wants to see them in its own special folder (Application Support>Common>Adobe).  Once I moved everything from the one folder to the other, then Premiere could see the card just fine.  They should be definitely look at a better way of dealing with this - so it doesn't become an emergency science project for people like me.
    Anyway, case closed - for now.  Thanks.

  • HD video from SD Card not showing up in Iphoto or Imovie

    When I put my SD card in, Iphoto comes up and has my pictures but not my HD video.  I tried to import in Imovie and then went under my SD card file and the video still is not showing.  The video is 100% on the SD card. They showed up when I imported my pictures and videos using windows on my mini toshiba. I want to edit the video on Imovie though..  Why wont they show? 

    As AussieDJ suggested - have your copied the files from the SD card to your hard drive? You should be able to open them in QuickTime or, at least, VLC DVD Player. I get from your message that you just want to watch the movies and not edit them?
    First, copy the movies onto your hard drive. Open QuickTime player and try to watch them there. If that fails, try downloading VLC DVD Player, open it and then try to view your movies.
    Good luck,
    Clinton

  • SD or CF cards not showing up in Finder

    Hello all.  I edit with FCP and always have created images of my SD and CF cards. When ready to edit I mount and import. I have noticed lately that I do not see the image of the card once mounted in finder.  I see it in my desktop and disk utility but not in finder. I can mount anything else like a program and shows up find in finder. I went ahead and used my reader and put in an SD card. Same thing. I used another reader, same thing as well.  Any suggestions on how I can get the card to show up in finder?  Thanks

    On the General Tab I do have external disks checked and in Sidebar, the card does not show up.  I did check the overall computername and within I see the card, but does not show up on sidebar.

  • MacBook Pro with Draft n card - not showing n

    I just got a Dell 1500 draft n card for my CoreDuo MacBook Pro. I installed it and the n enabler utility, but it is still not showing up as n compatible in Network Utility.
    I have installed the AirPort Base Station Updater, repaired permissions, rebooted, installed the n enabler again, etc. But still no joy.
    Any ideas?
    Phil

    Are you sure the enabler ran? Early reports said that the enabler would not run on a Macbook CoreDuo. However it worked fine for me for the when I installed the "n" card for the Macpro in my Macbook CoreDuo.
    Check out the following
    http://xlr8yourmac.com/systems/macbookprowireless_N_upgrade/macbookpro_N_cardinstall.html#storytop
    Others say you need to use Pacifist to extract and run the enabler on a CoreDuo (again check the article). Also I have read somewhere that you can edit the installer to change a parameter value so that it will run on a core duo (I tried to find it but couldn't).
    Don't give up - I have a great increase in range and speed. I was able to replace an old Airport extreme and 2 airport expreeses with a single new airport extreme.
    Good luck.
    Powerbook G4 12, Macbook Pro 15" 2 Ghz, iMac G5,20,BT, 250GB, 1GB RAM,   Mac OS X (10.4.8)  

  • Finder not displaying right disk space????/

    Hi,
    In Finder, the available hard drive space seems to be wrong.
    My system:
    MacBook
    2 gig of RAM
    OS 10.4.7
    I have run both WhatSize and OmniDiskSweeper. These apps say I have used 11.3 gigs of space.
    But according to finder I have used 27 gigs of space.
    Where is did that 16 gigs go?
    If anything, when I installed Tiger I did a "lean" version with less programs, printer drivers etc.
    Also, my "all files" back up on my external likewise shows only around 10 gigs used as back-up files.
    I am now pretty much convinced (from the two apps and my external space used for back-up) that Finder is the problem -- not invisible files, virtual files etc. I even logged on as the root to see if any invisible files were being shown. Nope -- same view.
    I should add that I also looked in actyivity monitor and things did not seem to add up. It said 27 gigs used, yet did not show anything suggesting that much should have been used?
    What can I do? I really do not want to "lose" 16 gigs just like that.
    Any advice is appreciated. Thanks!

    my external hard drive is showing -- two partitions. TYHis is what I get:
    total 8
    drwxrwxrwt 5 root admin 170 Aug 8 23:01 .
    drwxrwxr-t 31 root admin 1156 Aug 4 09:43 ..
    drwxrwxr-t 27 root admin 1020 Aug 4 03:48 BACK UP
    lrwxr-xr-x 1 root admin 1 Aug 4 09:43 Macintosh HD -> /
    drwxrwx--- 15 djmac djmac 612 Aug 4 00:32 THE VAULT
    So I eject the external, turned it off, rebooted, ran the command and this is what I got:
    total 8
    drwxrwxrwt 3 root admin 102 Aug 9 00:12 .
    drwxrwxr-t 31 root admin 1156 Aug 9 00:12 ..
    lrwxr-xr-x 1 root admin 1 Aug 9 00:12 Macintosh HD -> /

  • SD card not showing

    Hi;
    I have been successfully downloading pix from my camera by inserting the SD card into a slot in my monitor (Dell). Today, the SD card does not show up as a drive. I tried other SD cards to no avail. I then inserted the SD card back into the camera and connected with the supplied USB cable. Still nix.
    What has happened?
    Chris

    Hi BD;
    Found the little sucker (smaller than I thought and not where any of the sample layouts shown but marked PMU reset) and pressed it — I think I did, because got no tactile feedback that I did anything.
    Nada.
    I tried mounting it with Disk Utilities but the mount button is grayed out.
    I tried using a different camera that worked previously. Nope.
    Checked and swithed the USB cable from my monitor. Nope.
    To recap, two differnt cameras, one card reader, three different SD cards: all fail to mount.
    Hmmm . . .
    Chris

  • Airport card not showing up after new Security Update

    Just did the new Security Update and lost all internet with my Tibook. Getting message that no Airport card is installed. Not showing up in the System Profiler. Update has apparently killed my Airport card. Any solutions?
    Message was edited by: Michael Sastre

    I know that fella User — he's always messing things up! I'm glad you got the better of him this time.

  • SD Card not showing up in Final Cut Pro on the MacBook Air

    I have been using Final Cut Pro X on a Macbook Air (1.7ghz Intel i5, 256gb ssd, 4gb RAM) and when I insert an SD Card, it shows up but immediately disappears. It continues to be displayed on my friends MacBook Pro, but does not on my Air. 

    Apologies! All sorted. My mac was just taking so long to render the audio lol
    Still having issues with syncing audio (zoom h4n) video clips (multicam clip or sync clips). Normally works like a dream even on difficult material, but for some reason now randomly sync's clips way off the mark.
    Cheers

  • When I open Firefox (after upgrade) it does not show right side vertical scroller bar. I have to take the mouse and physically expand the browser to get the scroller bar to show. (never had this problem in previoius versions of firefox)

    Firefox 4.0 on Mac OS 10.6.7 When I open Firefox it does not show the right vertical scroller. I have to take my mouse to the lower right corner and drag it open slightly and the scoller appears It will stay active through other tabs now until I close or shut down firefox. Once I reopen the same thing again no vertical scroller bar.

    Yes AT&T is my ISP. I use DSL. Currently I am not at my home address. I am currently on a cable modem on COX.com.
    I am also receiving a warning message "WARNING: Parental control appears compromised!".

  • TREO 650 SD Card Not Showing On Desktop

    Mac OSx 10.6.1
    MIssing Sync 6.05b installed but showing as 6.0.4
    Treo 650
    I have an 8 MG Panasonic SD Card installed in the slot. Syncing iPhoto to the Treo works fine.
    It was my impression that the handheld SD card should show on the Desktop when the handlehld is connected by the USB cable. It is not. Disk Utility is unable to find the hanheld card either however if the card is inserted into my camera it is recognised.
    Am i wrong to assume that the card should appear on the Desktop? Am I missing something?
    Post relates to: Zire 21
    This question was solved.
    View Solution.

    Unfortunately the 650 cannot show the SD card on the desktop of your computer. This is also the same for Windows PC's. To move pictures to the SD card you can use quick install and drag and drop into the storage card part of the application. Then close it and on the next hotsync it will sync over to the device but place it in your SD card. 

Maybe you are looking for