SD card reader driver after windows 8 upgrade for hp 2000 notebookPC

My SD card reader doesn't work, how do I get it to work? I updated windows 8 to 8.1. I never used the SD reader before update. I have HP 2000 notebook. Please help. Thank you

Hi:
This driver should work...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-126476-1&cc=us&dlc=en&lc=en...

Similar Messages

LOST Touch screen DRIVER after WINDOWS 10 UPGRADE.

Hi I want to ask if the problem about the lost touchscreen HID driver after Windows 10 has been resolved...

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works. Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use. Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10. Please follow the provided troubleshooting steps and re-post with the results. Have a great day!

Card reader driver for Satellite M30X-134

Hello,
where can I find the flash card reader driver for my M30x-134? None of the support page seems to make it and i cannot find out who is the manufactor.
Thank you,
Patrick

Thank you for your advises. Unfortunately I still cannot find the driver. On the canadian site i was able to download some files called "SD Format" and "SD Driver Set", but Windows XP didn't accept them. I have in mind that this is a 6-in-1 card reader, so it should support more formats then the SD. There are two unknown entries in the Device manager, both are called "PCI FLASH-MEMORY". When i started the notebook for the first time (with OEM Windows XP) the card reader worked. Now i have an own license installed which didn't come with the notebook. Could this be the reason? Does anyoneone know who is the manufactor of the build-in card reader?

Internal Card Reader Driver Will Not Install -- Pavilion g4-1319tu

1. Product Name and Number: HP Pavilion g4-1319tu
2. Operating System installed: Windows 7 ultimate 64-bit
3. Error message: none
4. Any changes made to your system before the issue occurred: none
At first my card reader did not show up at all in Device Manager until after I actually inserted an SDHC card yesterday 17 jUNE 2012. Windows recognized the card and installed its own driver, Microsoft driver version 6.1.7600.16385 dated 21/6/2006, with the device's manufacturer being listed also in Device Manager as only "(Standard disk drives)" at Location 0, with the status shown as "This device is working properly". The card reader worked (and still works) and appears -- but only with the SD card inserted, otherwise it does not appear at all -- in both in Device Manager and in Computer>Devices with Removable Storage. I went to HP's Support Wizard site to update the driver. The site detected my product correctly and offered an update, "Realtek Card Reader Driver -Version: 6.1.7601.85" (sp55030) to download. I downloaded it and installed it. The newly downloaded driver shows up in Programs and Features. However, even after many uninstall / re-install attempts, the new driver version refuses to show in Device Manager's driver properties for the device. It also does not show when in Device Manager I try to manually update by "Browse my computer for driver software>Let me pick from a list of drivers on my computer". All that shows is the old generic Microsoft driver named above. If while in Device Manager, I try to update the driver manually by "Browse my computer for driver software>Search for driver software in this location (folder where it is saved on my notebook)", it shows, but still will not update / install. A message pops up saying there is no driver in that location. In addition, after I eject and physically remove the SD card from my notebook, the device and driver also disappear from Device Manager until I re-insert the card, even when Device Manager is set to "Show hidden devices". Please advise.

Hi, Ken:
The parts list for your notebook indicates that it has an Atheros 9485GN 802.11b/g/n 1x1 WiFi and 3012 Bluetooth 4.0 combination adapter.
http://partsurfer.hp.com/Search.aspx?SearchText=B5Z50UA
Give these a try...
When a notebook has a combination wireless/bluetooth card, you install the corresponding model bluetooth software for the model wireless card your notebook has.
Atheros 2011 Wireless LAN Driver
File name: sp54972.exe
Atheros Bluetooth Driver
File name: sp55212.exe

Can't access old ver. 9, 11 & 13 clips after Windows upgrade

In Sept. 2014 I downloaded PE 13 from B&H, worked fine and was able to access old PE9 & PE11 clips. In Dec. 2014 had problems with Wind. 7 Home Ed. and had to upgrade to 8.1 (decided on Pro). Installed 8.1 Pro end of Dec. 2014 and bought PE 13 DVD from B&H to reinstall after I backed up my hard drive. Problem after install of 8/1 Pro and installing PE13 from DVD I can't access and restore old clips from 9, 11 & 13. Tried everything I can think of....any suggestions PLEASE!

Very good, I completely understand. Please understand "I am not a computer geek!"
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets). CORRECT! Please as we go forward I have the PE 13 that was downloaded from B&H and worked perfectly with my previous assets in PE 9 & 11.
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem? NO! (First info is when I set up my new PE 13 after copying all data to a 1T desk drive and loaded Windows 8.1 Pro to replace my Windows 7 Home Edition, I set up the PE 13 and used 64 bit as suggested.) NOW...When I locate my previous Project Assets on the 1T drive they show as "red blocks" with a play arrow in them where previously were thumbnails, but I can't retrieve them. As such there is nothing to add to the timeline. Last night I added to the NEW PE 13 a 22 min program I'm working on. I have all those assets, thumbnails and everything is working as wonderfully as it did in 9, 11 and downloaded 13.
Now in response to a previous question you asked:
1. When you open Premiere Elements 13 Expert workspace, go to Publish+Share/Computer/QuickTime, do you see a list of presets when you explore
the Presets" field there? NO.... I can get to /Computer but there is no QuickTime there! I did download QuickTime yesterday after your suggestion.
2. You wrote
Restarted PE13 and received the message "The selected file cannot be played becuse your system does not have the required compresser/decompresser (codec) installed.
Where are you getting the selected file---- from Premiere Elements 13 Expert workspace Project Assets to where it was imported originally from a hard drive save location?
Or other? What is the specific full name of one of these files that is giving the error message?
With everything I've been trying, I'll have to recreate this series of events to answer directly.
When you did the switch from Windows 7 Home to Windows 8.1, did you go 64 bit to 64 bit or 32 bit to 64 bit in operating system? Help me with a way to determine what the bit was on 9 & 11!
Were two separate computers involved or did you manage to change the operating all on one computer? All on one Computer
The major focus for me right now is to make sure I know what file triggers the ".....not have the required compressoer/decompressor (codec)"? And to know that
you are in the Premiere Elements 13 Editor and not the Organizer 13 workspace. Help me understand!!!! I know the difference between "Add Media", "Project Assets", "Organizer", "Editor" and "Workspace". But "Project Assets" and "Workspace" are part of "Editor", so I don't understand your question.
WolcottVideo
    Can't access old ver. 9, 11 & 13 clips after Windows upgrade
    created by A.T. Romano in Premiere Elements - View the full discussion
WolcottVideo (Mike Bruce)
Thanks for the replies.
My communications are in the threads or via Adobe Forums private message. The thread communication is preferred since then all share, and learn.
Please try to reply to the post 4 questions or use the Adobe Forums private message system to send me a private message. To do the latter, click on my Adobe ID at the top of any of my replies in your thread. That should bring up my profile. Click on the orange envelope message icon to the right of what you see in order to set up and send your email to me directly. No one but you and I see the Adobe private message communications.
Here is a basic description of where the details between us need to be confirmed...
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem?
We will be watching for your reply.
ATR
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7087876#7087876 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7087876#7087876
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

SD card reader driver

Hello i have a k220 and it came with vista but i didnt like that so i installed xp on it. Does anyone know where I can get the SD card reader driver for windows xp??

Qosmio F45-AV412 Specifications
Qosmio F45-AV412 Downloads
As it sounds like you have done what amounts to a 'clean' or custom install of Windows 7 Ultimate, make sure that you have carefully followed these directions, and then use the driver/software installation utility, this might resolve your problems.
How to Custom Install Windows 7
Toshiba Software Installer for Windows 7
Please let us know what happens. Good luck.
Mike

F2 AND F3 BUTTON BRIGHTNESS+BLUETOOTH+CARD READER DRIVER ISSUE(window7)

hello i am using HP Pavilion G6 2311.My f2 and f3 button to adjust brightness is not working.as i just installed
window 7(32bit).And i already check in bios funaction key it is enabled.i guess its a driver issue.
second problem is bluetooth problem how to use laptop bluetooth.also its driver issue.
thirdly and lastly card reader driver issue also
please help to fix it and
the link to download trusted DRIVERS.
Thankyou

Hi:
Try this driver.
If this driver doesn't work, and you want to run W7, then you will have to install W7 64 bit, for which there are graphics drivers.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_125680_1#tab1

Satellite M70: Need mass storage controller & card reader driver

First issue: I want the driver of (mass storage controller).
Second issue: I have card reader but it doesn't work.

First issue: all you need you can find on Toshiba download page under http://eu.computers.toshiba-europe.com
Second issue: I presume the hardware is not installed properly. For that you need to install TI 5 in 1 Card Reader driver.
If you can not configure all this please use delivered recovery DVD and install OS. After doing this everything will work again.

Card reader driver

need card reader driver for hp-pavilion n207tu windos 7(64 bit)

Hi, Please try: http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52798.exe Regards.

I downloaded IOS 8 and I cloud drive has been upgrading for 2 days anyone can help me

I Downloaded IOS 8 and the I cloud drive has been upgrading for two days can anyone help

Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W.

USB and Media Card Reader disabled after installing DM

I installed the DM 4.3 from the CD tonight. Hooked up the BB and everything worked fine. Loaded some music onto the media card and downloaded some pictures. Then I unhooked to see if the music was on the Blackberry, when I hooed it back up, it wouldn't recognize. I tried a few times, then uninstalled the software, re-installed, still nothing, then un-installed and downloaded 4.7 and installed, still nothing, now my computer doesn't recognize ANY USB ports (web-cam, Media Center Remote) and none of the Media Card reader drives are visible in My Computer. When I insert the SD card from my camera, nothing. I uninstalled 4.7 and still nothing. Now I'm worried..
Please tell me that I don't have to wipe the whole computer and start again.. Please!!
neuralgroove

About the SD and SDXC card slot
Mac 101: Connect your camera or camcorder
Which os are you using? If Lion - OS X Lion: Use an SD card
If another os please research Apple's Knowledge Base for troubleshooting suggestions pertaining to your os.
iPhoto '11: SD card
"We're sorry, but the Safari browser version you are using does not support the community toolbar" I'm not sure if all of these problems are related.
Post in the Safari community.
Mac Book Pro (around 18 months old)
If no other troubleshooting solutions are forthcoming and you have AppleCare, give them a call and get a case number. Otherwise,
take the computer to an Apple store or an AASP. Whichever is more convenient for you to get a proper diagnoses of what is actually going on.

Got Display driver via Windows Update for Windows 8.1 and try to use it for Windows Server 2012 R2

Hi Everyone,
the following driver cab is from Windows Update:
https://onedrive.live.com/?cid=5be01620eea95d8c&id=5BE01620EEA95D8C!138&ithint=file,.cab&authkey=!APDi54-R1Ob5IWQ
It includes this display driver:
Intel(R) Q45/Q43 Express Chipset (Microsoft Corporation - WDDM 1.1)
My problem is: I can't install this driver on Windows Server 2012 R2.
I tried the following, nothing worked:
a) pnputil -i -a intel.cab
b) Extract cab, update the device's driver in device manager, select "search for driver software in this location"
c) copy the files in system32/, system32/drivers, syswow64/ from a Windows 8.1 system to a Windows Server 2012 R2 system
Isn't it true that any Windows 8.1 driver should also work for Windows Server 2012 R2 (same os version)?
Thanks for your replies.
PS: I first posted my question here:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/got-display-driver-via-windows-update-for-windows/31c287c8-ef84-4c81-8530-8c51412376b7

Hi,
Additionally, did you check this article?
http://www.driveridentifier.com/scan/download.php?item_id=90475670&scanid=9B44546E3BB9410D877D9A90D1439AF8&hardware_id=PCI%5CVEN_8086%26DEV_2E12
Regards.
Vivian Wang

Which jdbc driver should be used for sqlserver 2000 and where to put it.

hi all,
My odi is 11g. I met the error infor "Could not load JDBC driver class [com.microsoft.sqlserver.jdbc.SQLServerDriver]" when i tried to connect to a sqlserver2000 database.
The questions are:
1. which jdbc driver should be used for sqlserver 2000?
2. which folder to put it in?
3. how to set the physical topological "Microsoft Sql Server" to use this jdbc driver?
failed tries:
i downloaded the driver "SQL Server 2000 Driver for JDBC Service Pack 2" and put it in the following folders:
1. .../oracledi/drivers, and set this path to CLASSPATH.
2. .../oracledi/userlib didn't exist, i created it and put the driver in.
3. .../oracledi/agent/dirvers, in which a readme file exists and told me to put drivers in this folder.
All these works were not useful. when I start odi.sh and try to connect to sqlserver2000 database, the same error infor came up.
my environment is:
os: Linux 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
java: Java(TM) SE Runtime Environment (build 1.6.0_13-b03) Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02, mixed mode)
ODI: 11g, installed in /users/oracle/odi/
please help me,thanks a lot.
jun
帖子经 Jun编辑过

Hi,
You should check which JVM version is required by that version of the driver, I think the 2.x versions require a 1.6 JVM
What error are you getting? If it is the "com.sunopsis.sql.c: No suitable driver", it indicates it can't find the jar file (sqljdbc.jar) for the driver you specify.
Drivers folder in ODI 11g is under
C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers.
if you are using the standolone version
On windwos :
C:\Documents and Settings\<userName>\Application Data\odi\oracledi\userlib
on linux
$HOME/.odi/oracledi/userlib
Have a read of :- http://download.oracle.com/docs/cd/E14571_01/core.1111/e16453/install.htm#CHDBIFAJ
Thanks,
Sutirtha

Card reader slow after upgrade to 8.1 on ENVY h8-1520z desktop

I have an HP envy H8 – 1520 Z desktop with 8.1 Pro.
After upgrading to 8.1 Pro from 8 Pro my card reader takes a long time to bring up the data on the card from 15 to 25 seconds even if there are only three files on the card. I checked for driver updates on Windows and HP websites and was told I have the latest driver available.
I tried plugging the reader into a different USB connector on the motherboard and it worked great the first time, after starting the computer the next day the problem was right back.
I tried a USB adapter for the SD card and that also worked well but if I leave the adapter in the computer and just remove the card the same thing happens the next day after restarting the computer if I take the adapter out each time it works fine
I thank you for any help you can provide

Hello sam45,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with your SD card being slow to be read from after you updated your computer to Windows 8.1.
I am curious have you tried re-formating the SD card on the new OS?
Have you tried other SD cards to see if the issue is consistant? Have you tried a clean profile on your computer? To do this simply make a new profile/user and see if the SD card still takes a while.
Do you have an Anti-Virus running on your computer? If you do try disabling it to see if the issue persists.
If you could provide me with the answers to these questions it would be of great help in finding you a solution. Thank you for posting on the HP Forums. Have a wonderful day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Firewire 800 CF-reader faulty after lion upgrade

Hi,
After upgrading to Lion, my primo 2008 iMac will no longer read from my Delock firewire 800 CF-reader. Found a few other notions on mac-forums about firewire issues, some mentioning the kernel running i 64-bit being the course. Tried booting i 32-bit with no luck.
Any suggestions?
Martin

And their swift reply....
Dear Sir Christensen,
thank you for your message.
Our CF card reader is a plug&play device and is automatically recognised by the Mac OS.10.7.
That is only the cases, if her CF- card reader own the current firmware.
A problem with the default driver under Mac OS.10.7 is unknown.
It is none other driver available.
In our test we could not this problem reconstructed.
It is possible, that our CF card reader is incompatibly with her harware.
We have for our older CF card reader (befor december 2011) the following solution.
If you have a Windows XP you can update the new firmware for our CF-card reader in this system via the included tool.
The disadvantage is, the tool is executed only in a Microsoft operating system.
We have tested it and it worked.
Instructions for using the tool "91694FW.exe":
Link for the new firmware.
http://www.delock.de/produkte/G_91694/treiber.html
Please join our CF-card reader with your system .
Insert a CF card in our CF-card reader.
Now extract the software from the annex under the directory "C:".
Click inside the extracted folder on "91694FW.exe".
The tool should now be opened and the directory path for the "JMB355_v0.00.100.11.33.bin" will displayed.
Now click on the "Start" button.
The update is executed and a successful upgrade with the message "PASS" is acknowledged.
Then close the tool and test the CF Card Reader for Mac OS.10.7 with a CF-card.
Note on a possible error during the execution of the update.
If the "START" button after opening the tool can not be activated, is probably the cause the used the CF card.
Try to update with another CF card.
Please note the following information to the "Firmware Update Utiliy MAC v0.1.dmg.rar" !!!
The Mac OS.X based firmware became negative tested from us .
For this reason this firmware is not available over us.
In addition, can not be completely excluded a defect on our hardware.
Please contact in this case, her trader for the regulation of your claims.
Please note the following information about "compatibility with a Mac OS.X":
On all our current card reader ( since December 2011) is the firmware "JMB355_v0.00.100.11.33.BIN" contain.
The current card reader supported a Mac OS.10.5., a Mac OS.10.6 and a Mac OS.10.7.X .
Yours sincerely
Dietmar Burgund
Delock Support

SD card reader driver after windows 8 upgrade for hp 2000 notebookPC

Similar Messages

Maybe you are looking for