SD Card reader no longer works / Yeti Microphone no longer works

I guess I made the mistake of updateing my iPad software during the last sync. Now I get a low power warning when I try to use the Yeti microphone. The SD card reader no longer works as well. was told that I could use a powered USB hub. This kind of kills the whole portability thing.
Can we get Apple to fix this...PLEASE?

Harry Manko wrote:
Can we get Apple to fix this...PLEASE?
This is a user-to-user forum. To make sure Apple gets your feedback, use the appropriate link on this page:
http://www.apple.com/feedback

Similar Messages

Dm4-1060us laptop SD Card Reader 5-in-1 question. Does it work with SDHC and SDXC memory cards?

dm4-1060us laptop SD Card Reader 5-in-1 question. Does it work with SDHC and SDXC memory cards?

This cart reader is a kind of multi card reader and you can use different cards with it. In my opinion every multi device should be used very, but very gently. I do not know what happened exactly in your case but maybe you have damaged something inside.
Try to restart your notebook and use other SD card to check if everything works well. Please do it very gently and if you see something is wrong stop with inserting the card.
I use 1 GB SD card on my A200 without any problems.
In my opinion you should check notebook by technician.
Bye and good luck!

I have a Mac Mini, and it won't accept connecting my Sony video camera. So I got a SD mem card reader to unload my movies from. It worked the first time I used it a few months ago. This time it says it doesn't recognize the format I am trying to use?

I have all thenecessary updates. I have switched over from a PC to Mac back in April and have nad nothing but problems adapting. I don't know why this worked the first time, and put my videos inti imovie, and now it doesn't recognize it at all. And the Mem card reader does work, because I just put the SD card from my regular camera into it and it downloaded those fine, it just won't take my movies!

Which sony camera? I have a Sony HDR-CX550 right now and have been able to use the SD card as well as connect the camera directly. I also had CX110 that work too. You may want to try to copy the complete top level folder from the SD card to the Hard drive, then try to "import from Camera archive" and select that folder.

Charger malfunction. 65V will not work, yet 45V will (long)

okay, so i've had my 17" powerbook g4 since christmas of 2005, and it's been working fine until recently. i've gone through three chargers already, and tomorrow i'm going back to the apple store to see what's wrong. (first broke when the computer fell like a foot off the bed and landed on tha charger, bending it and breaking it, whereas the computer still worked fine, so we just bought a refurbished charger and my computer has been working fine for about a month and a half, until recently)
this is kind of a weird story, but go along with me.
the other day i was playing a game and my computer was plugged in (because the game takes so much from my battery), and it just randomly cut off on me. So i was like... okay, so i just took my uncl'es 45V charger and used that (even though a 65V is needed), just because i was not about to let my computer die and be without music.
so today we go to the apple store, and say we needed to exchange the charger out because the one we had now was busted, so we had to front the difference in getting a new one, and we got it, and i was happy.
so we get home, and i run to plug in my (almost dead) computer, and it's not working, the charger. so i change outlets three times, and nothing. the led light flickers green, then cuts off and dies. so i wait a few minutes and drag it to my uncles computer (ibook g4), and i plug it in (the new 65V charger), and it works and shows his computer as being fully charged. So then I take it and switch it to mine, and the same thing happens--- it flickers, then cuts out. So i try sticking it into my uncles computer, and nothing-- it's dead.
So I would figure that there's something wrong with my charger outlet in my computer, since it's not working, but my uncle's 45V charger works fine on mine, and charges my computer and glows orange showing that it's charging and everything, except it overheats a bit because it's not the required voltage for my computer. So I switch from the 2 prong wall thing, to the 3 prong extended cord, and still nothing. Same thing happens. It works in my uncles computer before it's plugged into my computer, then I plug it into mine, it dies, try my uncles, and it dies again. So I honestly don't know what's up, and tomorrow i'm heading up to an apple store with my computer to show them the problem and see what's happening.
But my question to you guys, would any of you know what happened? Because i'm clearly at a loss. And apple voided my warranty because of the dent near the plug, and it'll cost me like $1200 bucks to get the dent fixed and all that, so eh.
Powerbook G4 Mac OS X (10.4.6)

Welcolme to the Apple discussions.
Charging issues are focused on 3 components: the power adapter, the battery and the logic board. Have you run the Apple hardware test to see if it picks up a problem in the logic board? Insert the OS X DVD that came with your system (it will say AHT Version x.x in small print on the DVD), reboot holding the option key down, choose the Apple hardware test, and follow directions. Does that provide any information?

My lightning card reader for the IPad 4 won't work?

I have the SD card reader for my iPad and it does not work.
The photo app does not launch and even manually launching it does not work! If I am in Settngs>General I can see that the reader is connected fine...
I have now tried formatting the card on two camera's now and I have tried 3 SD cards now, the main one I use is a class 10 16Gb one but the 4 and 8gb ones did not work either, despite me formatting and taking a few images. Camera's I have tried are the Panasonic FZ100 and the Canon EOS 600D SLR but I can not get any image to import.
Does there need to be a certain amount of free space on your device for it to work? I have 64gb but only abut 400mb space free.
I really don't want the hassle of driving to the apple store, it is connected so it does work in that sense, just does not offer to import anything, any ideas?
Thanks

UPDATE:
I have deleted 18GB of TV shows from my iPad and there is 19GB spare, I've restarted the iPad 3 times, closed all running apps etc and still no joy. The card was formatted on the new camera and they use the DCIM and standard 8 character file format. I've also tried an 8GB card and I have also tried it in my wife's brand new iPad mini which has about 6 apps on it and virtually none of the hard drive has been used yet and again that shows up in the about menu as it being connected but no images show up in the photo app.
Both memory cards work fine when I connect them to my MacBook Pro too
I don't know what else to do, I can't find much information about it
Thanks

SanDisk USB 3.0 Card Reader does not work with OSX Mavericks.

Since updating to OSX Mavericks (10.9) My USB 3.0 SanDisk "ImageMate All-in-One" Card Reader has begun to fail.
It all seems to work proper at first. The memory card shows up in finder and I'm able to browse the files. But when I try to transfer any files it un-mounts from finder and only transfers the first file.
This does not happen under previous OSX versions. I have tried on other computers since, so the card reader is fine.
My USB 2.0 card reader saved my life this time. It works totally fine.
Is this a known problem? Are you guys working on it?

Solved in this post here:
https://discussions.apple.com/message/24016337#24016337

Pavilion dv6 3225dx sd card reader stopped working

The built in SD card reader on my pavilion dv6 3225dx has stopped working. I'm running Windows 7 and never had a problem but now nothing happens when the sd card is inserted Please help.

Hi,
Have you tried to use other card(s) ? Something like the following one may help:
http://au.cellphoneshop.net/cousbcarefor.html?gclid=CPfr0rePwrcCFYxgpQodQU8AZQ
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why can't I use/build an SD card reader for iPhone?

I have searched and searched for an SD card reader for iPhone. Apple offers the camera connection kit for iPad but for some reason they have made it incompatible with iPhone. This doesn't make a whole lot of since to me unless they are trying to drive users to buy an iPad. So far I have only found one SD card reader that claims to work on iPhone: http://www.zoommediaplus.com/index.html . If they have actually made it work with iPhone and the app is in the App Store then Apple must allow apps to transffer data from SD cards. If so I can make one myself and build the hardware to go with it since the Apple SD card reader doesn't work on iPhone.
I guess my main questions are:
     Does Apple allow SD Card readers for iPhone?
     if not:
          Why don't they?
          Can anyone tell me where it is documented that you can not use SD Cart readers with iPhone?
          How does ZoomMediaPlus get their app in the App Store if it isn't allowed?
     if they do:
          Why aren't their more SD Card readers for iPhone?
          Why doesn't Apple's lightning SD Card read work with iPhone?

Of course they forbid it. You realize that an iPhone 6+ owner cannot use the Apple Lightning SD Card Reader, don't you? We know the support for their own SD Card Reader is built into iOS 8 because it works with iPads. Therefore, Apple intentionally turned the support OFF for iPhones.
and it appears no one else has bothered to attempt to produce one
No, Apple forbids any third parties from producing one. They produce them for iPads but they cannot work on iPhones, because Apple chooses not to permit such functionality (i.e., they forbid it). Third parties produce such adapters for Android, so obviously they would want to do the same for iOS so they could sell more.
You're recommendation for AirStash is uninformed. I've tried it and found it to be a clunky time-consuming workaround if all you want to do is import some photos from an SD card. Using Photos in iOS to import photos is a far more elegant solution - an Apple solution that just works (if you purchased an iPad).
If it bothers you that iPhones do not work with Apple's own Lightning SD Card Reader, then I suggest you leave feedback instead of attacking those who point it out:
http://www.apple.com/feedback/

Satellie A100: How to use MMC card in card reader

Hi everybody,
first of all I have a Toshiba Satellie A100 Notebook.
And now my question: at the front of the (closed) Notebook, there is card reader slot, right next to microphone and volume,etc.
I have a MMC card of my mobile phone, but it doesn't fit in becuse the slot I much to big. Do i need an adapter? I'm afraid, that i won't get it out anymore afterwards!
Can somebody help me please?!
Thanks!
grettings, thomas87

No, i don't mean the express-card-slot on the left side of the notebook.
sorry, it is a satellie A100-773.
I have already looked into the manuals and there is a cardreader SD/MMC/...
under the slot there are also symbols of different mediacards!
so it does really exist! =)
but how to use it? it's such a big slot, and the mmc is rather small. so how should i put in the mmc? more left, or right or in the middle...you know what i mean? or do i need an adapter?
thanks, thomas87

Computer doesn't recognize card reader

I am having trouble downloading images from the SD card used in my Canon S3IS using a LaCie card reader. Tonight I downloaded images from a 1Gb SD card from my Canon SD800IS, the card reader worked perfectly. Then when I tried to download from the 2 Gb SD card from my S3IS I couldn't get the computer to recognize that there was a card plugged in. I have an Emac using OSX 10.3.9. I have been using the Image Browser software that I had installed when I had a Canon S1 IS, it had been working fine, but now I'm not getting any response from the computer. Tonight I installed the software supplied with my S3IS and downloaded the images from the camera, but I still can't get any recognition of the card reader with the 2 Gb card. When I have the 1 Gb card in the reader I get a driver icon in about 2 seconds, but I don't get any response when the 2 Gb card is installed. I had thought that my USB ports weren't tight and didn't get a good connection but the 1 Gb card shows that the problem is elsewhere. Are card readers limited in the size of card you can use with them? I have used this card before even though sometimes I had to plug and unplug the card reader into the computer several times before it worked. I should mention that the power light on the card reader always comes on. The images download just fine from the camera and there doesn't seem to be any problem with the 2 Gb card. Does anybody have any suggestions?
Thanks for your help.
Gordon

Terence:
That's probably what I need to do, get a newer card reader. I thought I had fixed the problem by "reformatting" my cards. I did some test shots and the reader worked fine. Next day I shot about 150 shots (on two cards in two cameras) and the computer didn't recognize either one.
Thanks for the help.
GT

Trying to import photos in Aperture but card/card reader keeps disconnecting ..error message then appears ?? any ideas

I have been trying to import my photos but "disk not ejected properly" keeps appearing. I am not moving it or doing anything etc. Could it be a software issue? or could my card reader be at fault? However it does work fine on my other computer

Is it a built-in card reader or connected to an USB port?
Have you tried a different USB port?
Have you tried to read from a different card with new photos?
Download and save all photos on your other mac, where you can read the card, and reformat it in the camera.

T420s 4-in-1 media card reader adapter problem

I'm wondering if any other T420s owners have had this problem with the media card reader.
Until about two weeks ago, the laptop was working fine, or so I thought. I usually put the laptop to sleep mode instead of shutting it down completely just to speed up boot process. Then, two weeks ago, I tried shutting it down completely. It got all the way to the "shutting down" screen but it would not completely turn off unless I hold down the power button.
It took a while for me to figure out that the media card reader was preventing it from completely shutting down -- even after restoring it to factory settings. Hardware manager recognizes the controller. It also recognizes the card reader if an SD card is inserted but would not assign a drive letter to the reader (i.e., I cannot read the card).
This is what I've tried:
1. Uninstalled and re-installed the drivers for the smart card reader and the controller. That didn't work.
2. Restored the laptop to factory settings. That didn't work.
3. Uninstalled and deleted the drivers for the smart card reader and the controller, then downloaded and installed the latest drivers from the Lenovo website after restoring the laptop to factory settings. That didn't work.
The only common thing in the process is this: the laptop would not shut down completely if there is an SD card in the reader. I initially suspected that it was the SD card itself but I've tried it with four different SD cards and the results were all the same -- it would not shut down if the card was inserted. While displaying that "shutting down" screen, it will shut down immediately after I pull out the SD card, even if it's been hanging in that state for minutes.
I suspect that it is the card reader itself that's causing the problem, and that I need to have it replaced (the laptop is still under warranty). However, I thought I'd seek the advice of the experts out there and find out what their thoughts are.
Thanks.
Solved!
Go to Solution.

kytz01 wrote:
Just took it to an authorized service center in Gaithersburg, MD (about 10 minutes from my office). I hope it's simply a matter of replacing the card reader.
BTW, 4-in-1 reader doesn't mean much. It's just an SD, SDHC, SDXC and MMC reader. Pretty much the same form factor. Now if it can read both SD and CF cards, I'll be really happy (my DSLR uses CF).
Thanks to everyone who offered advice. I'll post the service center's findings when I get my laptop back.
Good luck!!!
Yeah I have/had the same problem I have a DSLR that uses both CF xD, my HP notebook mulitcard reader reads xD, SD (4GB), but no CF. CF is a big card so I can see that as a problem on some notebooks. However I also have a camera using the Memory Stick Pro and it goes into the same slot on my HP but as you said. Lenovo's reader is only supporting the SD series which is a bummer. I still have to use an external reader for two other cameras.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

My CF card reader no longer works with OSX 10.9

I am a video editor, I shoot my content on a Canon XF-305 which creates MXF files on CF cards. Until I updated to OSX 10.9 everything was fine and I used to insert the CF cards into my Kingston FCR-HS3 USB card reader and then import/convert the footage accordingly. However since the OSX update I can no longer access my video footage on my Mac. The card reader constantly throws up a generic error message through finder that says 'disk not ejected properly' even though it is still plugged in. I've only managed to import a few seconds using pavtube MXF converter before it all goes wrong. I have used FCP X, Canon disk utility, and pavtube MXF converter - all are up to date with drivers and software and none of them work anymore!
Just to let you know I've contacted Apple and all they said is to check all drivers and software are up to date - which I have done, although Canon has not released any OSX 10.9 plug ins or drivers yet - which might be a problem.
Kingston does have a firmware update, but only for PC.
My thought's were to go back to OSX 10.8 but apple told me I had to use Time Machine for this and the last time I backed up was ages ago and I will lose too much important data.
Someone please help???

Had the same problem with my Kingston FCR-HS3 Cardreader (FW 0123, bought Aug. 2012) when using it on my Macbook Pro Retina 2012 with MacOS Mavericks 10.9.1 on the USB 3.0 port. Trying it on my MacPro Early 2008 with MacOS Mavericks 10.9.1 on USB 2.0 port everything was okay.
When trying to update the firmware of my cardreader to version 0131 (on a Windows 8 notebook) which is only available for Windows, I had an error several times and could not update. After changing to another USB-Port on this notebook everything went okay.
Now my cardreader is working fine and I even notice a rise in transfer speed from 100 (before) to 120 MB/s when using fast CF-cards (600x or 1000x).

Digital card reader no longer works for Windows 7 Pc, 3yrs old

Help, my digital card reader no longer works for Windows, 32bytes, on my 3 year old pc. HP does not have any any down loads for this. Any suggestions where else I can find them that would not interferre with other functions of my pc

Hi,
What is your machine ? The following devices may help:
http://www.ebay.com.au/bhp/usb-card-reader
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My third party lightning sd card reader sold to me in the Singapore Apple shop no longer works w

My third party lightning sd card reader sold to me in the Singapore Apple shop no longer works under iOS 7

Having the same problem with one I bought with my iPad in the Regent Street Apple Store. Not sure why it wouldn't work unless the OS now needs the lightening Connector certificate to use a card now.
I am hoping there will be a fix real soon or maybe someone knows a work around?

SD Card reader no longer works / Yeti Microphone no longer works

Similar Messages

Maybe you are looking for