Sd card reader not in device manager

Hi,
I have recently formatted my HP DM1 4118au, and after which, my SD Card reader was undetected by the Device Manager.
I have tried to install the Driver but it's still not detected.
Any otherway to make it work again, or to diagnose what is wrong?
I am afraid it is the hardware itself and not the reformat.
Please help.
Thanks in advance.

Hi,
Please try
Windows 8: http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59250.exe
Windows 7: http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56997.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

T420 WWAN+Finger Print Reader not in device manager?!?

Hi,
Im new to lenevo and this is my first one..its a Lenevo T420 4236P3G. I have been advised by Lenevo support that my machine is WWAN compatible and has a Ericisson 3G card built it...I also know it has a fingerprint reader which is clearly on the machine.
Problems I have
1) The sim card slot behind the battery seems really odd!? I KNOW if I put my sim in there it will just be lost forever. There seems to be no "click" in and out mechanism..Iv tried with a dummy sim with a string attatched and it defo does not have a click to it...If I put a normal sim in it would just be stuck forever..
2) I have a fingerprint reader and WWAN built in..BUT both of them do not appear in the device manager?! There are no devices which are unreconized and everything is accounted for so its defo not a driver problem...they just dont physically show!!
Iv already updated the BIOS, used lenevo update, tried both Legacy and UEFI bios options in the bios...
Only thing that it may be is my machine has a clean install of Windows 7 pro..Support have said they are sending me out copies of the original recover disks but I just dont see this working?!?I mean if they have disappeared and are not even picked up by the laptop in device manager then how will they run through a different install???
Tried using google but been no help..hope someone here can give me a hand
Thanks in advance

Hello ALI_PONNETH,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
As there are a number of different dv6 Notebooks by HP I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. This way we can find the appropriate information for your particular Notebook.
How Do I Find My Model Number or Product Number?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

6 in 1 card Reader not found after installing Windows 8 - HP Pavillion Dv6

I am running a dv6874ca and after installing Windows 8 the 6 in 1 card reader no longer works - the system does not read any information. I cannot find the card reader in the device manager.
Note: I am trying to view a Sony Pro Duo card which was possible before installing Windows 8. The only item that appears under "disk drives" within the device manager is my hard drive.

Try these drivers:
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45112.exe
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Flex 14 SD card reader not working with larger cards on Windows 8.1

The card reader in my Flex 14 is behaving very oddly. When I insert a 16GB SDHC card it makes the 'USB inserted' noise and the card shows up under device manager but I can't access it through file explorer. The card reader works fine with smaller SD cards that I have. I tried the card in another, Win7 laptop and it worked fine.
I see a number of other people are having a similar problem and I have followed all of the troubleshooting advice I can find, but nothing is working. Does anyone have any other suggestions?
This is what I have tried:
1. Leaving the card in the camera and attaching the camera via USB cable to the laptop: same result, noise, but can't access the card.
2. Trying to reassign the drive letter through storage controller: it shows the card but if you right click it to assign it a drive letter it says the 'file is missing'.
3. Downloaded the Win8.1 x64 driver from Lenovo website and installed. This stopped the card being recognised at all.
4. Installed the Win8 xc4 driver: this got me back to the noise but no action stage.
5. Updated Windows.
6. Uninstalled and reinstalled the driver numerous times both with the card inserted and without it and with restarting the computer after unistall and after reinstall.
7. Ran Ubunutu from a live USB: This allowed me to see the card and copy its contents to the laptop's HDD.
So it seems to be some incompatibility between the Lenovo drivers and Win8.1. Potentially it's to do with the USB drivers rather than the card reader drivers as the result when using the USB cable and the camera was the same as putting the card in the card reader. Is there a way to update these?
Any other troubleshooting steps I could take?
Thanks.

What size are the cards?
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Using The iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

Pavilion dv6 sd card reader not working

I have searched the boards and have not found an answer to my built in SD card reader not working any more. It worked fine until a couple weeks ago. When I go to "my computer", the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.
I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
Any other ideas? It is a pain having to carry around an extra card reader. Thanks for the help
rv9a
This question was solved.
View Solution.

Good morning rv9a.
Prior to the uninstall did the computer make a noise to indicate it recognized the card when you put it in?
You should go ahead and reinstall the specific driver for the card reader just to make sure that doesn't have an effect on the issue. Here is the link for Windows 7 and here is the link for Windows 8.
Another possibility is the the Plug and Play service is deactivated. Try the following to check.
Press the Windows+R keyboard shortcut.
Type "services.msc" into the box and click okay.
Scroll down until you find "Plug and Play" in the list.
Ensure that it is started. If it is not right-click on the service and select Start or Enable.
I'll keep an eye out for your response; have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

In my macbook pro hdmi, usb & SD card reader not working

In my macbook pro hdmi, usb & sc card reader not working.
i have tried the SRM reset done, till not working started.
Could you please resolve this problem,

Welcome to Apple Support Communities
Simply take it to an Apple Store or reseller if it's in warranty. Your Mac will be repaired or replaced for free because it looks a hardware problem rather than a software issue.
If it's not in warranty, hold Command and R keys while your MacBook is starting up, and reinstall OS X. If it doesn't work, you can't do much more to solve the problem

Z61t SD card reader not working?

z61t SD card reader not working?
Tried the Vista driver and still not working.
Same for camera.
I am running Windows 7 64bit and using TVSU v4.0 as well as manual attempts to update.

I am running windows 7 home 32 bit and can not get the sd card reader driver to load either. Any help?

Dc7800 "smart card reader not present" during POST

Hi,
I've got a dc7800 Small Form Factor system. It was working fine but after a reboot it won't start up normally anymore. The black POST screen appears, RAM testing starts to count up and then I see and error about "system options not set". After less than a second, a blue window in the middle of the screen displays the message "smart card authentication" and below that, "smart card reader not present".
From a bit of reading it seems like a BIOS problem but I can't figure out how to really reset the CMOS and get things working again. I've tried removing the CMOS jumper and booting the system, removing the power cord and CMOS battery for 10 minutes, and have tried putting a BIOS .bin file on a FAT32 USB key in an attempt to use the BIOS recovery option, none of which has worked.
Is there a way to do one of the following:
- force the CMOS defaults to reset and remove the configuration that requires the smart card authentication?
- force a BIOS recovery, with a key combination or by using a different jumper or jumpers on the motherboard?
I see various other jumpers and pads on the motherboard like "ROM RCVRY" and the E15 Boot Block Recovery Header but scant information about how these might be used to solve the problem.
It seems to me that the hardware is fine as it powers up and displays the POST screen. It's like a BIOS setting has been reset to require a smart card, even though there isn't one, nor even a smart card reader, in the system.
Any advice would be greatly appreciated.
TIA,
JS

Hi:
After doing some research on the message, I came across this post.
I guess your PC has a smart card optional system.
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/DC7800-smart-card-athentication/m-p/10691...
Now, if you can get into the BIOS menus, if you look at the top of page 8, you will see what you need to do in order to enable/disable the smart card reader message.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01162201/c01162201.pdf
Whatever the problem is, it is a security setting issue, and clearing the CMOS or updating the BIOS will not have any effect on that setting.
Unfortunately, I have no experience with the security settings or protect tools software on HP business PC's.
I have a dc7800 (and only use HP business desktops and notebooks), so I am very familiar with all the other aspects of the PC but that one.
You may want to post your issue on the HP business support forum, business PC section. Hopefully someone there has experience with turning this feature on or off.
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271#.Uk2rcJAo69I
You may also want to log in and reply to that post, but don't get your hopes up that it will be answered.
RichS hasn't replied to a post in 3 years. Although someone else may.
Good luck, and please post back if you find the solution to the problem.

Card reader not working out the box scr 3500?

cac card reader not working out of box scr3500 help

Welcome to discussions Kevin!
I'm sorry to hear that first of all make sure that there is nothing sick on the eye of the camera it self, after that how is the lighting on the room that the computer will be set up? did the green light came on when you're trying to use iSight? i'm asking because the same thing happen to me but it was nothing but bad lighting in my office. If this doen't help call apple asap they should replace your computer with out a problem. Hope this helps good luck!
Miguel

Memory card reader not working

Compaq Presaro CQ3000 Series Model CQ3420AN Memory card reader not reading any SD cards.
Where can I find download for original driver.
This question was solved.
View Solution.

http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/Memory-Card-Reader-not-uploading/m-p/1265779...
Here's a page that might help you resolve your problem if you haven't assigned a drive letter for your portable card readers.

HP Probook 450 GO laptop SD card reader not working

SD card reader not recognizing any sd card and not working. Any suggestions?
+ Touch pad not working with double click - have to use the button below

Hello @Jurists
Thank you for posting on the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since the ProBook 450 G0 is a commercial product. You can do this here: Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP ProBook 450 G0 Notebook PC
I hope this helps!
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Satellite Pro L300: WLAN is not in device manager and is missing

Hi,
I have a Toshiba L300 which I downgraded from Vista to WXP months ago. So I decided to stick with Vista and when I installed Vista the WLAN was missing in device manger and it didn't work. I tried downloading drivers adapters from Toshiba drivers download and still didn't work. Only my Ethernet is showing in device manager....btw I have a Realtek WLAN
Also,my VGA graphics card doesn't seem to update driver and when it does it says that the system is below minimum specs.
It's soo weird in WXP it was working fine..... Any solutions?

>I tried downloading drivers adapters from Toshiba drivers download and still didn't work.
What does it mean exactly? Have you installed WLAN driver or not? Is WLAN card installed properly and listed in device manager as Realtek WLAN card?
How to understand you?
Have you problems to install WLAN card or to configure WLAN connection?
If the WLAN card is installed properly enable the card with WLAN switch and then use FN+F8 key combination and be sure card is set to ON.
Which display driver you want to install? Which version?

ACR122U smart card reader not recognized after reboot...

I am new to POS Windows and have been working with wondows for ever. I was using ACR 122u contactless usb smart card reader with windows XP and communicating with it using java with no problems. Then our I changed the OS to windows Pos ready 2009 and we found out that USB card reader has to be unplugged and plugged back in after rebooting the computer. other than the OS everything else is identicle (driver, reader, java program, ect..). Can any one tell me what could cause this problem and what I can do to solve this.
I have cheked the device manager and under USB controllers it says that it is unrecognized deivice..I tried changing the reader, changing the port and(actually the reader is pluged in to a linksys external usb hub, but changing this to a internal port did not make any difference) tried chagning some settings in control panel.
1. I checked the power option of the root usb hub.
2. Changed the driver.cab to a normal driver.cab obtained from the normal xp version. Uninstall the driver and reinstall it.
So far this hasnt been working.
I hope someone could help me with this.
~Tharanga

After extensive tests with Win 7 Embedded and ACR122U, I can confirm the same problem. It seems that reader firmware hangs and the only way to recover is to unplug and plug again the reader. We shall repeat the tests with readers from other manufacturers.
For the tests, we use a Win7 Embedded Standard PC with an ACR122U connected. We installed and configured the ACS Monitor program to start automatically with windows. We made a small utility to restart the PC every minute and we placed it on the Startup directory.
Within the first 5-10 reboots, the reader fails and the ACS monitor program shows " No reader connected" and no reaction from the reader. If we shall unplug and plug the reader again to the USB port everything works fine again.
Kostas P.

T430s SDHC card reader not working

Hi, I recently bought a T430s and when I tried to insert a SD card it did not show up in my computer. I've tried 3 different SD cards the sizes are16 gb, 32 gb and 2 gb and neither of them shows up, to make sure the problem is not in the SD card I tried using the SD cards in 2 cameras and 2 other laptops. In all those devices the cards works.
I have tried installing these drivers from this thread https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/New-T430s-4-in-1-express-card-SD-reader-mi... but it did not work.
I also tried following the instructions in this thread http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T430s-card-reader-cannot-read-16-GB-SDHC-ca... but that did not help either.
According to the device manager the Ricoh PCIe SDXC/MMC Host Controller is working correctly. The Ricoh SD Disk Device is also working correctly.
Whenever I insert the SD card the Sound for a new device plays and when i remove the SD card the removal sound plays. How can I fix this? I'm going away for 7 weeks with my laptop so I need to fix it ASAP and I dont have time to send the laptop to Lenovo.
EDIT:
I uninstalled Ricoh Media driver and now 1 of the cards show up but Windows complains about that it needs to be formatted, but the size is 0 so that doesn't work either. Tried installing the driver again and now they show up in the device manager again and proudly says that they are working but the SD card still doesn't show up so I can read the files on it.
EDIT 2:
If I go into the device manager and forcibly update the the Ricoh SD Disk Device then it says:
Disc: Disc 1
Type: Removable
Status: Online
Partitiontype: MBR (Master Boot Record)
Capacity: 15807 MB
Non-allocated space: 0 MB
Allocated space: 0 MB
For the 32 gb SD card everything is the same but instead it says "Capacity: 30828 MB".
EDIT 3:
When the SD card is inserted a storage device pops up in the device manager. The name of the device is just "Unknown device" and the status is that it can't find any installed drivers for the device.

I'm experiencing a similar situation with my 1-year old T430s. The built-in card reader was working fine until recently when it stopped working.
Now the built-in SD card reader doesn't recognize SD cards that are recognized in external USB adapters.
Device Manager shows Ricoh PCIe SDXC/MMC Controller when an SD card is inserted into the card reader but neither Windows Computer Management/Disk Management nor Windows Explorer show the drive. Device Manager indicates that the driver is up-to-date (v6.10.10.32 25May11.)
When I put the same SD cards into an external USB adapter they're recognized by Windows, assigned a drive letter and visible to Windows Explorer as well as other applications.
Do I have a defective card reader?
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

HP GS60 - SD Card Reader Not functioning or visible in My Computer

HP GS60 Product Number FS184UA
Windows 7 Service Pack 1 (32 bit)
Serial number (S/N): 2CE835J6V5
I'm an avid photographer. I have run Windows 7 since shortly after it came out. I have been using the reader regularly since Nov 2009. (actually, I was using it earlier under Vista as well). In December 2011 the internal SD Card Reader on the HP G60-120US ceased to function. I insert a SDHC card and it does not show up in my computer.
Right or wrong I've taken the following actions to try and resolve this issue:
1) Reinstalled Realtek USB 2.0 drivers from the HP site.
2.) Reflashed the BIOS. It was already at the current version F.54 A - I reflashed it anyway.
3). Deleted all devices under Universal Serial Bus Controllers and allowed them to readd automatically.
The re-add of the USB controllers went well enough although it did not solve the problem.
Confirmed that my SDHC cards are good by both using multiple cards in the slot and, when that didn't work, I inserted the cards back into the camera and connected the cards to the computer via a USB cable to the camera. That worked fine (not desirable as it's so much slower).
Confirmed that all my standard USB ports worked fine by attaching other devices to it. They work fine.
What might be relevant is that I do not see anything under disk drives that would look similar to this:
Generic SD/MMC
Should there be? I'm not certain.
If there should be, how can I get it readded back in?
Currently, the only item under disk drives is the ATA drive where the o/s resides.
What is the proper device related entry for the SD card reader for the HP GS60-120US that should be present in the Device Manager?
I cannot tie the failure to any particular software change. While I used the card reader often I do not use it daily. A windows update could have come in, disturbed things but I might not have become aware of the impact to the card reader even if it was an update that did it.

Hi @rlstockwell
I understand that you are looking for some help in how to use the SD reader on your notebook. I am happy to help with this.
I would recommend taking a look at this page from windows.microsoft.com. If gives an overview of how to do things.
Using flash memory cards
Let me know if that works for you, or if you need more.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Sd card reader not in device manager

Similar Messages

Maybe you are looking for