Sd card reader not working on ios7.1, Sd card reader not working on ios7.1

WWhen connected to sd card reader, media does not show up in photos media but does automatically open photos

Moosehunt,
     Hi,
          Same here i'm afraid, Sept 2013 MBP Retina c/w 256GB. Brought a PNY 64GB StorEDGE Flash Memory Card because it was advertised in MacFormat, its suppost to be part of PNY exclusive for Mac range spacifically stated for MBA, MBP and MBP Retina so that it locates and is "almost flush".  When I tried it it protruded out at least 10mm and dosn't locate on the slot detent to card cutouts. I tried a standard card and again it wouldn't locate.  I made an appointment thro' my 90 day service cover and visited the Genis Bar.  We tried the card in a display 13" and 15" MBP Retina to no avial, it fits perfectly in a MBA!!.  I've measured the depth of the slot to be 0.625" (16mm), I wasn't able to measure a MBA and would be grateful if someone were able do so. There is nothing stuck in the slot, as I see it as a DESIGN FAULT, why should a MBP Retina be any differant to a MBA.

Similar Messages

  • HT4101 Why does my lightning sd card reader connection kit not work on my iPad mini since I upgraded to ios7.

    Why is my lightning sd card reader not working on my iPad mini since I updated to ios7. It worked perfectly well before upgrade.

    Try rebooting your iPad:  Press and hold BOTH the power and home buttons at the SAME time for about 10 seconds until the Apple Logo appears, then let go of both buttons and your iPad will restart.
    Is the lightning kit you use an Apple kit or aftermarket?  If it is Apple and after rebooting it does not work, return it to an pple Store and they will replace it.

  • Flex 14 SD card reader not working with larger cards on Windows 8.1

    The card reader in my Flex 14 is behaving very oddly. When I insert a 16GB SDHC card it makes the 'USB inserted' noise and the card shows up under device manager but I can't access it through file explorer. The card reader works fine with smaller SD cards that I have. I tried the card in another, Win7 laptop and it worked fine.
    I see a number of other people are having a similar problem and I have followed all of the troubleshooting advice I can find, but nothing is working. Does anyone have any other suggestions?
    This is what I have tried:
    1. Leaving the card in the camera and attaching the camera via USB cable to the laptop: same result, noise, but can't access the card.
    2. Trying to reassign the drive letter through storage controller: it shows the card but if you right click it to assign it a drive letter it says the 'file is missing'.
    3. Downloaded the Win8.1 x64 driver from Lenovo website and installed. This stopped the card being recognised at all.
    4. Installed the Win8 xc4 driver: this got me back to the noise but no action stage.
    5. Updated Windows.
    6. Uninstalled and reinstalled the driver numerous times both with the card inserted and without it and with restarting the computer after unistall and after reinstall.
    7. Ran Ubunutu from a live USB: This allowed me to see the card and copy its contents to the laptop's HDD.
    So it seems to be some incompatibility between the Lenovo drivers and Win8.1. Potentially it's to do with the USB drivers rather than the card reader drivers as the result when using the USB cable and the camera was the same as putting the card in the card reader. Is there a way to update these?
    Any other troubleshooting steps I could take?
    Thanks.

    What size are the cards?
    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Using The iPad Camera Connection Kit
    http://support.apple.com/kb/HT4101
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom 

  • Media Card Reader does not work on W541 (is O2Micro, not the RealTek)

    Can not read an SD card on my W541.  It reads fine on a W530. Reviewed the ReadMe, and tried to find the driver in the WIndows "Device Manager" but no luck.Experimented and found that if I did the following:Brought up Device ManagerUnder "View" menu, chose "Devices by Type" (this should really be in the instructions, although perhaps not necessary).Under "Action" menu, chose "Scan for hardware changes"found that the node labelled "Storage Controller" finally appeared (towards the bottom, just above "Storage Volumes")  There was one entry under the node, that of "ByHubTech/O2Micr Integrated MMC/SD controller".  The icon preceding this entry had a yellow triangle, so at least the system detected something was wrong. Right clicked on the entry and chose "Properties" and resulting dialog had the following text in the "Device Status" area (on the "General" tab): This device cannot find enough free resources that it can use.
    (Code 12)
    If you want to use this device, you will need to disable one of the other devices on this system. I have no idea what "resources" are being referred to in the message (a case of "I've got a secret"?), so it is a little hard for me to understand what other devices I might want to free up. Bios is version 2.20The "BayHubTEch/O2Micro Integrated MMC/SD controller" driver version is 2.2.2.1057 (which is the latest as of 6/26/2015).Runnin Win 7 Enterprise + SP1, 32GB RAM.

    Hello,
    I don't have a W541 myself, but here are a few things to check, in no particular order:
    Have you checked with your IT department?  Maybe they set a poilicy to disable the card reader.
    Is the card reader correctly enabled in the UEFI firmware?
    Have you run ThinkVantage System Update and Microsoft Update to confirm all of the various Lenovo and Microsoft updates are installed?
    Do you still have the OS image the device originally shipped with?  If so, does the card reader work under that?
    Regards,
    Aryeh Goretsky
     

  • Why does my card reader not work on my iPad since upgrade?

    I use my iPad mini to download photos from my camera when I'm on the road. In the summer I bought the "3 in 1 Card Reader Adapter Cable Camera Connection Kit, 3 Port Card Reader for iPad 4 and iPad Mini by Eurekka" and it worked wonderfully. I was able to download photos (jpg and RAW) directly to the iPad and off the camera, and once home it was a flawless upload to my iMac.
    However, once I upgraded to iOS 7 last week I get a message saying the device is not supported. What gives? Will this be fixed or will Apple products only accept Apple accessories from now on?

    No but I was just trying to find a way in to your help desk. I didn't find 
    your web page very helpful in this regard.
    Douglas Whiteley
    In a message dated 10/05/2012 20:43:50 GMT Daylight Time, [email protected] 
    writes:
    Re:  why does my adobe reader not work
    created by Claudio  González
    (http://forums.adobe.com/people/Claudio+González)  in Adobe Reader - View the full  discussion
    (http://forums.adobe.com/message/4395059#4395059)

  • SanDisk USB 3.0 Card Reader does not work with OSX Mavericks.

    Since updating to OSX Mavericks (10.9) My  USB 3.0 SanDisk "ImageMate All-in-One" Card Reader has begun to fail.
    It all seems to work proper at first. The memory card shows up in finder and I'm able to browse the files. But when I try to transfer any files it un-mounts from finder and only transfers the first file.
    This does not happen under previous OSX versions. I have tried on other computers since, so the card reader is fine.
    My USB 2.0 card reader saved my life this time. It works totally fine.
    Is this a known problem? Are you guys working on it?

    Solved in this post here:
    https://discussions.apple.com/message/24016337#24016337

  • Tecra 9000: SD card reader will not work with XP

    I have made some progress with this subject, it seems that Cardbus devices cannot share IRQs, although the main issue is that the memory address FFDFB200-FFDFB3FF is shared by both the SD card controller and the SD Card Memory Device. Unless a way to modify the registry can be found to resolve this memory conflict, the simple answer is that the SD card reader won't work under XP.
    I think this would take some major surgery of the registry or re-writing of the drivers to move the memory address used by the SD card device, I am still working on this for now.
    Can someone from Toshiba Support or Toshiba Marketing please explain to me why my Tecra T9100 has a sticker with "Designed for Windows XP and Windows 2000" on it, when Toshiba don't fully support XP on the 9000 series?
    David
    [Edited by: admin]

    Hi David
    Unfortunately, I dont think that you will find here someone from Toshiba marketing or other departments. This is ONLY a user to user forum.
    What you say is simply NOT true.
    The Tecra 9000 was delivered with 3 different OS.
    It was delivered with Windows XP Pro, W2k and Win98. You can order all this Toshiba images from the Toshiba service partner. Therefore Tecra 9000 does support Windows XP!
    Tecra 9100 was delivered with Windows XP and Windows 2000 and supports also Windows XP!
    Of course there are different models with different hardware configuration but all supports WinXP.
    I dont know why you get this error message or why you cannot use the SD card but I assume you dont use the Toshiba image. Therefore you have installed your OS not correctly. Because youre a newbie you dont know that the whole Toshiba driver installation must be done in the right order and all the Microsoft QFEs must be also installed.
    As you see you have to pay attention to many important things if you want to install the OS manually.
    Have a nice day

  • Camera connective kit does not work with card reader

    Can I only use my USB camer connective kit with my camera and not a card reader?

    Which card reader? Are you using an SD card in it or some other form factor?
    As long as you're targeting an SD card with photos or movies, it should work same as connecting to a camera....but in that case, there is really no need since the camera kit includes an SD reader.

  • HP Envy Touchsmart 15-J104sa Memory Card Reader not working

    I took delivery of an HP Envy Touchsmart 15-J104sa running Windows 8.1 this week and the internal memory card reader isn't working. It doesn't recognise any SD cards (I've tried more than one) and continues as if nothing has been inserted; showing no error messages. All of the cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver update software (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) every time an SD card is inserted; this must be done with the card in the reader. If the software is run and then the card is inserted nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it isn't recognised and the process has to be restarted and the driver reinstalled even though nothing has changed.
    Can somebody please help me with this issue or I will have to return the laptop to HP. I do a lot of photography so being able to read an SD card quickly and reliably is extremely important for me; it's not a problem I expected from a brand new laptop straight out of the box.
    Thank you all.
    This question was solved.
    View Solution.

    Unfortunately non of the driver updates solved the problem but a BIOS update through the HP Support application seems to have remedied the issue. Whilst I appreciate there were no specific drivers available I find it hard to accept that HP should be able to release a model where they know the hardware will not be fully supported by the OS and in this case not function.

  • USB memory card reader not working since latest security update

    Hi, I have an iApp CR-e500 multi-format memory card reader; worked great prior to the latest security update. Now every time I plug it in I get the following errors in the console:
    Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.818 AppleUSBEHCI[0x1b4d800]::Found a transaction past the completion deadline on bus 91, timing out!
    Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.826 AppleUSBEHCI[0x1b4d800]::DoIOTransfer - error 0xe000404f queueing request
    The reader works fine on my office Windows laptop and my USB pendrive still works on my Mac, so the USB ports appear to be functional; they just don't like this thing anymore.
    Was there a USB driver change? If so is there anything I can do to sort this? I suppose I could just buy a new card reader if someone can confirm one that works with the latest security update of 10.4.11, that would be great.
    Alternatively if Apple could please loosen up whatever they tightened in their USB drivers that would be nice as well...

    Disregard. Looks like it's the memory card I'm trying to mount; not working on the Windows machine either.
    Sorry!

  • In my macbook pro hdmi, usb & SD card reader not working

    In my macbook pro hdmi, usb & sc card reader not working.
    i have tried the SRM reset done, till not working started.
    Could you please resolve this problem,

    Welcome to Apple Support Communities
    Simply take it to an Apple Store or reseller if it's in warranty. Your Mac will be repaired or replaced for free because it looks a hardware problem rather than a software issue.
    If it's not in warranty, hold Command and R keys while your MacBook is starting up, and reinstall OS X. If it doesn't work, you can't do much more to solve the problem

  • My mid 2010 Macbook pro running OSX 10.8.4 sd card reader will not work

    I have a Macbook Pro 13" mid 2010 model running OSX 10.8.4.  I don't use the card reader very often so I can't tell you the last time it worked, but I have used it a few times without issue.  (probably not for at least a year though)
    I searched the forums and it seems this was an older problem with lots of suggested fixes.  I tried blowing air through the slot and I also went looking for XQuartz but cannot find it under my utilities.  (I assume it must be in the X11 category that is no longer supported under 10.8.4?)
    I have tried putting it in all the way and pulling it out slightly as one person suggested and that also did not work.
    Any ideas?  For the first time in a long time I need the card slot and it doesn't feel like cooperating.  LOL
    edited to add that I am trying to access a Sony SDHC 32GB card model SF-32NX
    Thanks in advance,
    Wayne

    If you haven't already done so, eject the card by dragging its icon to the Eject icon in the Dock (where the Trash icon usually is.) Make sure the write-lock switch on the card is in the unlocked position. Then reinsert the card and test.
    If there's no change, and the same happens with more than one card, the card reader is stuck in write-locked mode. I don't generally advise do-it-yourself hardware repair, but one ASC member managed to fix this problem. I haven't tried the fix myself and I can't offer any guidance beyond what's in that discussion. If you cause damage, don't expect your warranty to cover it. I suggest you instead make a "Genius" appointment at an Apple Store.

  • LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

    LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

    Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

  • CAC Card Reader not working on 1 of 2 computers

    I have an iMac 20-inch early 2009 and a MacBook Pro early 2011. I have installed OSX 10.8.5 on both. I followed the instructions to the letter from http://militarycac.com/ on both computers. I am able to use my SCR331 reader successfully on my MacBook Pro but am not able to use it on my iMac.
    On the iMac:
    I am able to see the SCR331 is conencted and recognized via System Information. The SCR331 version is 5.25 (updated firmward as suggested at ttp://militarycac.com/)
    I attempted to install Centrify (which did not work) so I chose CaCKey instead, which installed just fine
    When I plug the reader in, the light lights up steady. When I insert my CAC it does not blink like it should. The CAC certificates do not show up in Keychain either.
    When I unplug the reader from my iMac and plug it into my MacBook Pro, it works just fine... I'm missing something somewhere........
    Any help wold be greatly apprecitated! Thank you!

    I forgot to add:
    On my previous version of OSX (unfortunately I can't remember which I upgraded from) I was able to use my CAC Card reader on my iMac. So, after upgrading to 10.8.5 I was no longer able to use it with the OSX native software. I wonder if some of the settings I had to tweak (when using the old OSX) are affecting this problem now...
    I had never tried using my reader on my MBP previously.

  • Card Reader not working for HP 20 All-in-One

    I have an HP 20 All-in-One PC and have bought two All in one card readers that use the USB slots to connect with the PC. Neither work though which is very frustrating!  
    Nothing happens apart from the light comes on in the card reader.

    Hi again bardofely,
    It is good to hear back from you again!
    Since you are still not able to discover your USB card readers, I recommend following the steps in this document on Windows 8 Safe Mode. This should help to enable your system to recognize your card readers without any additional services or background programs.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Maybe you are looking for