SD card reader on Pavilion g7 not working

I have a Pavilion g7 notebook, and lately the sd card reader hasn't been working. I use it to drag music files onto my phone's sd card (I have an adapter) but when I tried to do so today, it kept saying the drive was busy although it wasn't.
I read through the forum and kept seeing the recommendation to reinstall the Realtek SD reader. SO I did that, yet nothing has happened. Please help! I would love to have my music on my phone

FYI - to fix problem i had to do a manual install from Device Manager using the "have disk" feature. From that popup, pick the SD Reader, then Ricoh as the manufacturer, THEN click on Have Disk and choose the location for the extracted driver (C:\WIN\DRIVERS\MEDIA).
Good luck!

Similar Messages

  • Satelllite A100-773 and WIN 7: Card Reader and Fn-Hotkeys not working

    Hi,
    I hope that this question was not asked 100 times before. (I haven't found an answer in this forum)
    Problem:
    Card Reader and FN-Keys are not working, where can i get drivers?
    I installed Win 7 Pro on my Satellite A100-773 Notebook. All works fine and Win 7 has all drivers installed but the FN-Keys and the Card Reader are not working.
    On the Support Homepage is no driver oder anything given for this Notebook with Win 7.
    Can anyone help me with that?
    Tahnks.
    PS: it was not un upgrade version.

    hi at all,
    by now i tried the toshiba value added package for serveral model for win 7 and vista, but before finishing the installation there is an error.
    the card reader is now working with card reader criver for win vista.
    Does no one know how to fix this?!

  • CD, SD card reader and Touch pad not working

    Hi, I have a mid 2009 MacBookPro. Some months ago my touch pad started to play up, it works sometimes but does not let me move screens around etc, then my SD card reader stopped reading any SD cards, I have tried pushing it in a number of times, I have attempted to use it with iPhoto open, no joy. Now my CD drive is not working and does recognise any disc I put in. Does anyone have any idea what could be going on????

    Hi JillyJnr,
    If you are having issues with multiple I/O interfaces, you may want to try resetting your SMC/NVRAM. You may find the following articles helpful:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Apple Support: About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Regards,
    - Brenden

  • I just bought a Quantaray All-in-one card reader.  It does not work with my Macbook OSX.

    I just bought a Quantaray All-in-one card reader.  My Macbook OSX does not seem to read it.  I have tried attaching it with iphoto on both before and after attaching the card reader to the computer and also have tried another card.  Directions say that a green light should come on to prove that connection has been made; I only get a red light.  I am Europe with no help and am desperate. Can anyone out there please help? Thanks.

    There is no way to use the Thunderbolt display with a computer that has no Thunderbolt port.
    Swap the display for the Mini DisplayPort version
    <http://store.apple.com/us/product/MC007LL/A/apple-led-cinema-display-(27%22-flat -panel)>
    The price is the same.

  • Reflow in Adobe Reader for Android does not work

    The reflow option in my Adobe reader for Android does not work. The PDF book I am trying to read is too wide to be legible when I fit it into the screen (even in landscape), but the reflow button doesn't change that. When I click it, nothing happens. The only thing I know to do is to uninstall and re-install, but that did not work. Any other tips or ideas?

    Mehwish,
    Thank you so much for responding, and so quickly. I appreciate it.
    It does not appear as though the PDF I am trying to read would have an element in it that would block it from reflow, but that is always possible. It’s a textbook, and I understand that toward the end of the book there are some charts and diagrams, but I haven’t gotten to those chapters yet. So far, I’ve just been trying to use the Adobe Reader to read the introduction and first chapter and nothing I have done has made it reflow.
    I’m enclosing a copy of the entire book. Perhaps you can uncover something in it that I didn’t see.
    Thanks again for you help.
    Stan
    Dr. Stan G. Duncan
    123 Sumner St.
    Quincy, Massachusetts 02169
    617-855-7539 (hm)
    781-504-6875 (cell)
    215-647-7583 (fax)
    508-295-1630 (Ch)
    <mailto:[email protected]> [email protected]
    <http://homebynow.blogspot.com/> http://homebynow.blogspot.com
    <http://www.huffingtonpost.com/stan-duncan> http://www.huffingtonpost.com/stan-duncan

  • Hi  I am a keen photographer and I have just bought you SD card reader for ipad. This works well but was winding if there is an app that I can view the images on the SD card full screen without having to import them to the iPad or is there a way to do thi

    Hi
    I am a keen photographer and I have just bought you SD card reader for ipad. This works well but was winding if there is an app that I can view the images on the SD card full screen without having to import them to the iPad or is there a way to do this on the iPad
    The reason for buy this was for when I was out and about to get a better view off my images.
    I have a iPad 2 16gb
    Hope you can help!
    Thanks

    A couple of weeks ago, (after reading a review in TUAW) I bought a wireless hub/ SD card reader called RAVPower.  its app comes with a built in viewer, so you can load it up, and see the pics full screen. 

  • Read Out loud is not working

    I can't get some PDF to read out loud. Any idea why? I am able to select and copy the texts so it's not an image for sure. If I paste the texts to word or some other app, I can use the text to speech from my Mac OS to read out loud and it's working fine. Any suggestion is much appreciated.

    Here's something new. This is one, http://www.ponemon.org/local/upload/file/NokNokWP_FINAL_3.pdf, of the many files that read out loud did not work. After reading your email, I thought I tried something new. The PDF in this link here read out loud fine in Safari and Chrome browser but when I downloaded to my computer it did not work in both  Reader or Pro v11.0.10. I have a MacBook Pro Yosemite. That is very strange.

  • I have just installed the latest version of Adobe Reader but it is not working.  I just get a blank

    I just downloaded the latest version of Adobe Reader.  It is not working.  I just get a blank black screen.

    Disable Protected Mode via the registry. Download, unzip, then run the attached registry script
    ~Deepak

  • HELP !! I have downloaded adobe reader but it's not working

    I have downloaded adobe reader but it's not working ?? Everytime I try to open a page useing adobe it just comes up with a message saying you need to download and registra ?? Im on Mac book pro. Any help would be great as its driving me MAD

    If you go to your applications folder (Go>Applications) do you have Adobe Reader in there? If you open Adobe Reader and choose File>Open are you able to open a pdf file?

  • I have a card reader i use for my work i need to do online and i am not able use it because it says it is not verified do to a certificate

    i have a CAC card reader but it wont work when i try to use it to do some classes for work

    See also:
    * [[/questions/752709]] Having problems configuring FireFox to use a CAC reader
    *https://militarycac.com/firefox.htm

  • SD card reader in DV5000 won't work in Windows 7. Can't find a driver to reload

    I have an   HP Pavilion dv5000 (EZ415UA#ABA) which I upgraded to Windows 7 when I replaced a dead hard drive.  Several of the onboard hardward devices quit working; among them was the multicard reader which I now need to read SD and MicroSD card (with adapter).  Can anyone point me to a driver which works on this computer with Windows 7?
    Thankd,
    -Rick

    Do these devices show any issues in the Device Manager? Did you try to install specific drivers or just install Windows 7 and hope it picked up the drivers? Is it 32 or 64 bit Windows 7? I am guessing 32 bit since I do not think your CPU can run 64 bit.
    Here are the Vista drivers including the card reader. If the Windows 7 is 32 bit these drivers will work OK. You may need to run the driver installer in compatibility mode. 
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3184...

  • Having issues with your Card Readers in Windows 7 not working? Here's resolution!

    You do not need drivers for the card reader. There are NO Windows 7 drivers.
    (1.) Click on the Start button and then choose Control Panel.
    (2.) Click on the Administrative Tools a window will open.
    (3.) In the Administrative Tools window, double-click on the Computer Management
    (4.)  When Computer Management opens, click on Disk Management on the left side of the window, located under Storage. 
    (5.) This is where you will see Drives listed. The Card Reader will be listed as 1-4. Just right click & assign Drive Letter.
    Right click on each of the drives 1-4 and assign a Drive Letter. Now place your SD card in the correct slot and an a pop up for auto play will show. Now you reader works and will also show when you open COMPUTER it will show them as removable drives with proper drive letters. It took me several days to figure out after no help from HP or internet search. So when found the drives listed I just right clicked saw assign drive and it worked. Hope a lot of people searching on internet find this reply so that it will help them get there card reader working again under Windows 7 because even there tech's don't have an answer. Well good luck because this will work!!!

    owj wrote:
    I followed the steps but did not see drive 1, 2, 3, 4.  I see C; Jbackup drive, D: CD/DVD.  I'm still not able to get the card reader to recognize an inserted card.
    HP notebook 10''
    I'm having trouble with my card reader. I been thro steps mentioned in HP forum but only C:drive is listed .
    I had a problem with the hard drive earlier this year had to reinstall windows 7home premium from a disc unable to activate system restore.
    Ian Barrow

  • Airport card 1.2.1 does not work with Ibook G3 with OSx.4.2

    I just purchased a brand new airport express base station. It seems to be up and running on my G4Imac just fine as a server.
    For the client,
    I have an ibook G3 and now have OSX.3.4 on it.
    I installed my ancient Airport card- 1.2.1 into the Ibook.
    I installed the new software from the new Airport base station.
    I tried to install the old software from the Airport 1.2.1 card but dont have Classic- so would not install.
    Now, the Ibook does not allow me to choose Airport in the Network Preferences section- does not seem to recognize there is a card installed. So, no way to connect to the base station.
    My questions:
    1.can OS X..3.4 recognize the old Airport 1.2.1?
    2. Does the software from the new base station support the old card when used in the client?
    3. Do I need different software for the card in the iBook other then the base station software? ie, is there card software that needs to be installed, and if so what is it in system X?
    Im trying to figure out if I have a hardward problem- ie the card or slot is not working- or s software problem.
    Can anyone help?

    MacOS 10.3.x has all the software to use an Airport card already installed. All I would recommend you do is install the Airport 4.1 update provided at:
    http://www.apple.com/support/downloads/airport41formacosx.html
    The software that ships on the CD that came with the Airport Express is only used to configure an Airport Express. It doesn't provide any software updates for the MacOS itself, nor for the Airport card installed in that Mac.
    First thing I suggest you do - run the System Profiler utility on your Mac. See if it identifies that an Airport card is installed. If it does not then recheck the installation of the card - ie pull out the card, then plug it in again and make sure it is fully seated into its socket. Remember to also attach the antenna cable to the card. If the System Profiler still fails to "see" the installed Airport card, then the card itself is likely defective.
    [Side note: Airport 1.2.1 was the version of the Airport software required to provide software support for the card in ancient MacOS versions. Airport 1.2.1 is not actually installed on the Airport card itself, so if you install an original Airport card into another Mac it makes no difference what Airport version was installed on the Mac the card was pulled from.]

  • Built-in microphone on HP Pavilion DV6500 not working in Windows 8

    Hello, 
    I would like to know why my built-in microphone does not work after I installed Windows 8 Pro 32-bit on my HP.
    Please note that before on Windows 7 the microphone did worked. 
    Service tag dv6551ea
    p/n: GJ013EA#B1A 
    Windows 8 Pro 32-bit
    Thank you!

    Hi  ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP Pavilion g4-2020tx Notebook and Bluetooth not working. Here are some links that might help.  I would check to make sure Bluetooth is on. It shows you how to do that under Connecting Bluetooth. A device such as computer might need to have the Discovery setting turned on. To turn on Discovery in Windows 8, from the Start screen, type Change Bluetooth to open the Search charm, and then select Change Bluetooth settings from the search results.  Hope this helps. Thanks.

  • Adobe Read Out Loud feature not working

    Anyone else run into this.  We activate it, it scans the document looking for tags, then does not read it.  Any ideas?

    Hey there hdilios,
    Just been trying to sort this one out myself, I noticed that you tried re-installing Adobe Reader with the same result.
    Could it be that, when you installed the first time / updated and then re-installed, Adobe Reader Protected Mode was automatically re-applied by default. Read Out Loud will not function while in Protected Mode.
    You must disable it to hear Read Out Loud document reader, it is quite safe to disable this additional security function, and the only way to make it work.
    To disable Adobe Reader XI Protected Mode
    - Open Adobe Reader
    - Click menu item Edit
    - Select Preferences
    - Preference panel opens
    - Select Security (Enhanced) in Categories list
    - Uncheck Enable Protected Mode at Startup
    - Dialog opens Click Yes
    - Close Preferences
    - Close/Restart Adobe Reader
    - Open a document you wish to read
    - Activate Read Out Loud
    - Choose Option to read Page or Whole Document
    - or setup for Reading with the Accessability Assistant.
    Hope this is the answer you are looking for, my Read Out Loud feature is functioning fine now it had me baffled for a while, thought my sound card was malfunctioning.
    Cheers Jethro

Maybe you are looking for