Sd card wont read after android update

Same issue as others already posted. Updated android 4.1.1 on my slate 7 yesterday. Micro sd card no longer reads. No error message but external storage does not read at all. Also, Spotify app does not run now, possibly other apps too - not yet tested. Please help!!!

Hi!, inkjet3: Your problem, is recurrent, in all HP Slate, with OS Android 4.1.1 actualized, with compilation number v1.05.17_user. May be, HP know this and quickly have solution. You must be wait, for this.You can use alternativity, transfer to PC, across the apk File Manager HD, what you can downloaded and install from Google Play Store. Then use FTP (File Transfer Protocol) to PC, LAN, Cloud, etc ... Note: HP, didn't produce the OS; is Android.

Similar Messages

HT4623 what do u do if your iphone wont activate after u update it

what do u do if your iphone wont activate after u update it

You contact the carrier it's locked to and see if they will unlock it for you. Activation problems are almost always due to the fact that the phone was hacked to unlock it instead of being legitimately unlocked.
Of course, this can also happen if you're trying to activate it without a SIM in it. You can not activate the phone without a SIM.

Satellite Pro C850 wont work after Bios update

my satellite pro c850 cd wont work after bios update from toshiba.
what do i do?

Saying: dont work you mean it does not power up or what do you mean exactly?
Did you flash the BIOS properly?
Possibly something went wrong during the update and this means that ROM module isnt flashed properly
In most cases a special BIOS crisis disk would be needed to get it working
Not quite sure if you can get it fixed by your own
Check this thread. Maybe it helps:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
Otherwise you need help from authorized service provider available in your country.

Cannot re install adobe reader after Anna update !

Hi there, i know there has been some chat about losing Quick office and Adobe reader after Anna update on N8s on this site, I also lost office and Adobe after the update ! I needed to get office asap so i went to the quick office website and paid for it, that works fine but it seems adobe will not install even directly from quick office ! The support from QO has been great but i still cant re install adobe !! They have finally suggested that i re install Anna and than try again ! Does anyone have any other ideas !
Solved!
Go to Solution.

@beefy122
I have the same problem but I am not prepared to pay for Quick Office or pdf reader because the full versions came as standard with my N8.
It appears that the Anna upgrade comes in 3 parts:
The main Anna file, Additional file 1/2 and finally additional file 2/2.
I installed the Anna upgrade then 24 hours later I was offered (both via Ovi Suite on my PC) the 2/2 additional file.
However, Quick Office and pdf reader are apparently included in 1/2, which has not yet been offered to me, presumably because my phone has not recognised that it has not been installed.
I am on Orange Uk and I wonder if Orange have not yet fully tested the updates and therefore that is why the full suite is not available to me. I may be wrong of course.
At one point on one of the other threads, someone had posted a link to the updates required for both 1/2 and 2/2 but these links disappeared from the posting quite quickly.
Which updates have you loaded?
I have re-installed Anna 3 times and it has never offered me the 1/2 update that I require.
I would also appreciate other ideas but they have not been forthcoming yet despite many postings in quite a few threads (other than suggestions to reset the phone etc, that I am not prepared to do)
History: Always Nokia since 1994 including Nokia 2140, 7110e, 6150, 6210, 6310i, 6230i, N82
Current: Nokia N8 (Anna - I have no intention of going to Belle) - and delighted with it!

Wont boot after windows update

M y Sateite A305 s6916 wont boot after windows updates tried to install.

Satellite A305-S6916
tried .. every option on F8
Try this. Download a repair disc from here.
   Windows Vista Recovery Environment ISO X64 version (64 bit)
If you can reach the Recovery Environment by booting that, try the Startup Repair and let us know what happens. Sometimes you need to run it more than once.
   Startup Repair: frequently asked questions
Also try a System Restore.
   What are the system recovery options in Windows Vista?
-Jerry

3gs wont activate after latest update

My Iphone wont activate after the latest update was installed, even when connected to Itunes it just say disconnect and install sim card, even though there is a working sim in the phone, any help would be gratfull.

"We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care...Your request Could Not Be Completed?"
99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, you need to get a sim card from the carrier the phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked.

Trying to recover my data My Micro SD Card became corrupted after JB Update

Can someone please help me?
Here is the issue:
Background:
I have a Samsung Galaxy S3 phone that I transferred my micro SD Card into from my previous smart phone. About a month ago I realized that some of the pictures were corrupted and called verizon they told me to put the sd card in the old phone and see if I could delete the corrupted pictures. Did that, the card went back to working as I was used to it working. I then had a friend download some music to it. That also worked fine until verizon sent out the Jelly bean update. When the phone turned off and then back on after the update, the phone gave me an error message that said the SD card is damaged. I immediately took it out of the phone and put it aside.
Current issue:
So today I purchased a card reader, New micro SD card and came home and downloaded Recuva. So far everything is great. All the files, I card about came up in the directory with little green circles next to them. (All the music and my 5 sms back-ups) I then hit the recover icon at the bottom of the screen and the data gathered. Then it never recovered over to my c drive or to the flash drive (memory stick) that that I put into one of the other ports. I keep getting 1 or 2 messages. The one I am seeing the most is " The parameter is incorrect" the other one I am seeing is that the memory is not ready for the data. I am now at the point where all I care about are the 5 sms back ups. The music can be reloaded later. files are called sms-"date backed up and a string of numbers".xml
So question is do I need to buy recuva to actually recover my data or am I doing something else wrong? Please help.
Thanks so much in advance.
So an update as of 8:45 pm
So here's what else I have tried so far tonight. I went back into the CMD mode of my computer and ran chkdsk d:/f   this now produced a name of a file that is corrupted. Also says that it removed the file. I then ran chkdsk again with the exact same result. The file was not removed.
Running recuva I am getting more files recovered now and more green circles. But, when actually trying to recover the files I am still getting the message "The parameter is incorrect"
Most of the other software i have found is either for recovering pictures or deleted files not corrupted ones. This is the only software that appears to do what i need it to do for my issue. I think I may be in over my head and it may be time to pay a professional to move on from here. Any thoughts would be greatly appreciated.
Thanks again for taking your time to reply to me.
Message was edited by: Dayna Pachman

There are some free alternatives to recovering files from a SDcard. photorec.exe is one. Try a Google search to find others.

MicroSD Card not reading after upgrade to Windows 10

I am using a 64GB SDXC card in my Lenovo YOGA Tablet 2-1051-F, with Windows 8.1. I formatted the card to NTFS. Everything was working fine, but now that I have upgraded to Windows 10, the only problem seems to be the card is not recognized any longer. The "SD" logo shows up in the "This PC" window, but when I try to click on it (left or right), it hangs and then after quite a while it asks me to insert a card. I have installed all the driver updates from the Lenovo support site (no downloads specific to the card reader). No change. I even downloaded a driver file from Realtek and ran it - maybe a mistake, but it doesn't seem to have changed anything at all. I don't seem to be able to find any information regarding the drivers for the reader or reinstalling them. Thanks for any suggestions! BTW, the card still reads fine when I put it in a slot on another machine.

I have the exact same problem using a Transcend 64GB SDXC card and Lenovo 1051F.The card worked before upgrading and works in other computers/readers. Extra informations : After upgrading when the micro sd card is in slot : - The tablet can't shutdown (error after several minutes) - The card is not properly recognized (appears sometimes in explorer but can't access to content) - Windows Explorer crashes and freezes randomly - Longer boot time - Bluetooth randomly fails to pair with bundled keyboard and a logitech bt mouse When I remove the sd card everything works as indended. No lag, bt works fine, boots and shutdowns fast...

Laptop wont boot after BIOS update

Hello
i have a compaq CQ61-303SV laptop
i tried to update the BIOS and i download the file form the hp driver and support website
after i update the BIOS the laptop wont to boot and stop on a black screen
what to do please ...

Power down the notebook, disconnect AC adapter and remove the Battery, hold the power button down for a full 30 seconds, connect AC only, hit the power button and see if windows will load.

MP wont restart after software update

I just did the recent batch of updates including system update, QT, Motion, and many more and suddenly in the middle of a panic of deadlines, the computer will not get past the rotating ring/clock that often happens for only a few moments on any OSX machine. In the old days I'd disconnect SCSI, the network connection, etc. but am not sure where to go on the new machine and given the deadline am afraid to go hogwild. It's a brand-spankin' new machine so the fact this has gone 20+ minutes is mind-blowing.
Any ideas, much appreciated with any trouble shooting help.
PS: i'm on my powerbook -- that machine seems to be in a coma.
Thanks,
Dan T.

Hi and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.

Imovie wont open after mavricks update

I movie wont open after updating to mavricks. help?

Many people have been having the same problems this week because of he update. Someone on the forum mentioned uninstalling "Bonjour". +Bonjour locates devices such as printers, other computers, and the services that those devices offer on a local network - Wikipedia.+ If you have never needed it uninstall it. You could also try typing "MSCONFIG" in the Run selection under the accessories folder and un-checking it under the "Services" tab.
I personally have had the same problems. What i did was i un-checked it on the MSCONFIG menu first and then uninstalled Bonjour.
Hope all this helps

Final Cut Pro wont export after Maverick update!!!!

HI guys, I am facing a painful trouble of not being able to export anything from FCPX after I updated to Maverick. When I click Share/Export Movie nothing happens, not even a blink. Then I tried different exporting options like Apple Devices, Media Browsers etc. but it just gives me on message >>>>
The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
I have tried following options available of many other forums, youtube videos and blogs :
1. Prevent App Nap in Get Info. Done. Nothing happens.
2. Try deleting All Render Files. Done. Nothing happens.
3. Try increasing the disk space. Done. Nothing happens.
4. FCPX preferences changes. Done. Nothing happens.
5. Re-install FCPX. Done. Nothing happens.
I really need to finish a project for a client and this is just becoming such a pain. Where is Steve Jobs???
Please help!!!!

Sounds like you're using an obsolete version of the software. What version is it?

Adobe Reader for Android Update

Hello Everybody,
We have updated the Adobe Reader for Android today. This update brings reflow back, adds Android 4.0 compatibility, and has a few other great feature additions. Read the blog posting for the full details!
http://blogs.adobe.com/acrobat/2011/12/adobe-reader-android-update.html
Dennis Griffin
Principal Product Manager, Adobe

We are aware of this ask and it exists in our product backlog, but unfortunately is not planned for the immediate future. Sorry for the inconvenience caused.

Missing Adobe PDF reader after Anna update

I can't be certain that I lost the PDF reader because of the Anna update, but after the update I noticed that I no longer have the Adobe reader app and if I try to open a PDF file, it says it's an unknown file.
Can someone help me re-install Adobe reader that came with my phone?
Thanks!

Check this out
/t5/Software-Updates/HELP-No-QuickOffice-after-installing-Anna/m-p/1187011#M102046
If I've helped in any way, a click upon the star over on the left would always be appreciated.
If however my answer also solves your problem clicking below it will benefit other users!

Portege Z930-118 wont start after BIOS update

my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
Any help please

Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
In such case you need professional help by authorized Toshiba service provider.
On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

Sd card wont read after android update

Similar Messages

Maybe you are looking for