SD:-copy control, no. range, Message no. V1331

Hello,
-- We have one process we are creating one contract (ZS02) with reference to another contract(ZS01) in VA41 ZS01 --> ZS02 its working perfectly fine.
-- due to business requirement we created another contract type ZCS1 which is copied from ZS01, now we are creating ZSC1--> ZS02 , copy control and other settings (no. range ,text , pricing )are same as ZS01-->ZS02.
Problem :- when i am creating ZS02 based on ZS01 its working fine , but when i am creating ZS02 besed on ZCS1 it is giving below problem
A) while creating ZS02 in VA41 system showing same document no. of ZCS1 in creation overview window and not allowing to save ( as ZS02 has its own internal no. series and it will generated automatically after saving in case of ZS01---> ZS02 )
B) if i am changing something it is showing error massage Message no. V1331
Note:- all settings for ZSC1--> ZS02 are same as ZS01--ZS02
please find attachment for more detail
Regards,
Mahesh Fulse

We have one process we are creating one contract (ZS02) with reference to another contract(ZS01) in VA41 ZS01 --> ZS02 its working perfectly fine
From the above, I could only say you were following some wrong process. When you say ZS01 > ZS02 is working fine, why are you trying vice versa. To make it simple, I can create a sale order with reference to quotation but not quotation with reference to sale order. Hope you understood the basic concept in SD process.
G. Lakshmipathi

Similar Messages

Number range for copying controls

hi
when i tried to create a proforma invoice, while saving the invoice it is throwing a error message that NRIV number range has not been maintained when i checked NRIV i have found that for my sales org and billing document it has not been maintained .
can you help me in as where we maintain the number range for these copy control documents.
early answers!!!! higly appreciated!!!!!!
regards
kiran

hi
NRIV is a field where you can find all the number ranges. i have seen that number ranges for sales documents and invoice documents has already been maintained.
you will find a field 'no range int. assgt.' enter the number assignment of your number range here or select from the drop down menu. save.
the above setting has already been made.
i think this is a setting some thing where we need to maintain internally inthe table NRIV
Thanks
kiran

Creating or Copying controlling area

Can you please tell me, what is the standard SAP best practice:
1) To copy controlling area from existing 0001. (I tried copying from 0001 co area but could not)
2) Creating new controlling area.
Please let me know. I will be helpful.
Priya

Hi,
I think the best way to avoid the further config is Copy by Template like CoAr and CoCd. It will save lot of time in maintaining the number ranges (KANK). Also all std doc types are automatically set.
Ofcourse one should localize the sample org to their country so that Currency and Fiscal Year Var are set auto.
Sometimes while copying SAP gives error regd some table entries.(Error TK455). Pl search SAP note by the same message no. and delete the field values like 12 for REICHWEITE.
Hope it clears the doubts.
Best Regards,
Kiran

Credit Memo Request (Copy Control)

Hi everyone. Can anyone give me a hand, please?
I would like to send an error message if a end-user is trying to create a Credit Memo Request (tr:VA01) with reference to a billing document which has been cancelled (tr: VF11) already. Actually the system let me do that, but the client doesn´t want to support it anymore.
Thanks in advance.

You can maintain the Same in the Copy Control between Billing Document to Sales Order in a Routine that if VBELN in VBRK - FKSTO is "X" ,do not allow to maintain / Save the Sales Order.
Best Regards,
Ankur

Copy control from quotation to sales order

HI ,
Though my quoation is incomplete it can be copied into sales order, kindly suggest me a so;ution where in incomplete quotaion cannot be copied into sales order.Kindly explain me teh setting in TCODE (VTAA) STEP BY STEP.
Regards
Sunaina

hi,
Copying control for sales documents is in Customizing, under Sales and Distribution - Sales - Maintain Copying Control for Sales Documents.
In this you can change the procedure by not selecting incomplete quotation for sales order, but this can be done only when some of the data in quotation is missing.
like dont give the validity date in quotation and save it before providing the validity date.
Maintaining an Incompleteness Procedure
An automatically-created quotation does not contain a Quotation-valid-to date. The customer's system requires this information for processing; therefore you have to add it to the quotation prior to saving the document, and before generating the message to the customer.
The incompleteness control is set up in such a way that the quotation is incomplete if this date has not been entered. In Customizing for Sales and Distribution, you choose Sales and Distribution - Basic Functions - Incompleteness Control for Sales and Distribution Documents, to assign sales document type QT (quotation) to incompleteness procedure 10, which contains the field for this check.
Message Control
The following message types have been created to Sales and Distribution (SD) in the vendors system:
·        Message type AN00 for the quotation
·        Message types POST and PNST for status inquiries
·        Message types BA01 and BA02 for the order
         confirmation and amendment respectively
·        Message type LALE for the delivery
·        Message type RD00 for the invoice
regards,
Siddharth.

Delivery copy control Issue

Dear All,
I created a new order type, Item category, Delivery type and delivery item category. Maintain copy controls too.
But system is not allowing to do delivery.Error Message '
Copying is not poss.because an entry is missing in Table TVCPL; ZTAN- LF.
I searched in forum too no solution in most of the cases. Entry is reflecting in Table TVCPL.
May you pls advise
Regards,
DP

Hello,
If you need your flow to be a Z*** order-> Z*** delivery, then it is correct not to maintain a copy control from Z*** order->LF delivery.
What I can suggest is to:
1. Remove your copy control from Z*** order->LF delivery.
2. Review your entry in transaction VTLA ans make sure that you have only now the copy control from Z*** order-> Z*** delivery.
2.1. Make sure you have the item category/(ies) from the order in the configuration of the item level in transaction VTLA
2.2. If you need a new item category in the delivery, you can make a new item category determination. But in most cases, this is just copied from the sales order (see documentation in SPRO path for copying control for deliveries).
Sample Entries in TVCPL
Delivery Type//Sales Doc Type//Item Category
ZEBB //ZBR2 <-this is my copy control header level
ZEBB //ZBR2 //ZB70 <-this is my copy control item level; ZB70 is the item category as determined in the preceding Sales Order ZBR2
3. Make sure you also have the proper copying requirements and data transfer routines depending on the business requirement.
Good luck,
Eva

Issue in copy control F2 to RE for BoM (TAP) item

Hello All,
I am facing a issue in return order which is reference to F2.
I have maintained all standard copy control, still I am having a issue in TAP item category.
The issue is
In my sales order I have one standard item ( TAN ) and one BoM item(Main item of LUMF) and its sub item is of TAN as BoM is of item pricing.
I can see in my order to Invoice all 3 items ( TAP item is not relevant for pricing and picking, its fine )
but when I try to create return order with reference to F2 , I could get all 3 items in return order but TAP item converted to TAN and hence its relevant for the pricing, return order value is not matching with F2 ( as third TAP item comes in picture)
as In my invoice BoM main item is having TAP item category ( showing zero price in Invoice) so I believe same item should get copy in return order with zero pricing but its not happening.
Guys can you provide me any specific copy control for TAP or any other solution.
BR,
Abhijit

Hi Navaneetha,
I have maintained the copy control as per your suggesstion but it is not working
I will tell you how I want the scenario
In Return Order RE I want all items to be copied from F2
1 ) Standard material 1-- TAN (F2) -
> REN ( RE)
2) BoM
Material 1-- TAP (F2) -
TREN ( developed by me ) for no pricing
sub item TAN (F2) -
REN
for above item categories I have maintained determinations and copy control
still getting a message in while creating RE is " Item category for item 30 can not be determined."
Regards,
Abhijit

"Rise of Atlantis" Mac game created "out of range" message through switch

I've got a mac-mini. I've been running the mac game download from apple "Rise of Atlantis" for a while now. I have an older SONY SDM-HS95P DVI/SVGA monitor (capable of 1280 x 1024 resolution) connected to the mac via DVI to SVGA adapter out of the mac mini, and SVGA into the Monitor. No problems when launching or playing the game.
However, I just added an SVGA Distribution Amp to the chain (capable of 1600 x 1280). So now it's DVI to SVGA adapter out of the mac min, SVGA into the SVGA Distribution Amp, and one SVGA output of the DA goes to the SONY computer monitor, and the other SVGA output of the Distribution Amp goes to my SONY HDTV via it's PC/SVGA input. I did this so I could stream videos off the computer to the TV. This all works well. I change my screen resolution from 800 x 600 (when sitting in front of the computer so all text is very big because of bad eyes) to 1260 x 768 when streaming to the HDTV so the picture fills the screen.
However, I just introduced a problem with the game "Rise to Atlantis" that I didn't have before I added the distribution amp. When launching the game now, the screen flashes to black and I get an
"out of range" message. The message stays there, and from the mac mini, I can't even get it back to the normal screen without rebooting the mac mini.
However, if I remote into the Mac Mini via remote desktop connection from my 27" imac quad core, I can see the game and control the computer. But this isn't a viable solution.
I have tried setting the mac mini display resolutions to lower, middle and higher resolution settings before actually launching the program, but nothing helps. I also disconnected the SVGA output of the SVGA distribution amp. going to the HDTV to see if that would help, but it does not.
So it appears that the SVGA Distribution amp. is causing some sort of a hiccup that throws the SONY computer display to black and that "out of range" message.
Can anyone suggest anything that might allow me to keep things hooked up as they are and still be able to play the game? 'Rise of Atlantis" is a mac game, downloadable from apple, ....but it's the type of game that seems to take over the entire screen....so you can't see FINDER or your desktop when playing it...it's definetly throwing the SONY display into some sort of "take over" mode.
Any input would be appreciated.

No, I did not try swapping the outputs as neither is marked primary or secondary, indicating that they were in any way different. However, I did resolve the issue. I didn't realize that in "Rise Of Atlantis" it was automatically set to display FULL SCREEN and that I could set it to NOT do that. I made that change and now I can see FINDER/DESKTOP behind the game while it still pretty much fills the screen and this has eliminated the problem I posted about. However, thank you very much for your input. I appreciate it.

Copy Control : Sales document to Sales document

Dear Experts,
We have a requirement relating to copy control between sales document to sales document i.e Creating a contract with reference to an already existing data.
Please consider the following example:
Contract A
Valid from: 01-01-2010
Valid to: 31-12-2010
Material Code: X1
Material Pricing Group: Y1
To enable the users to create a contract with reference to this existing one i set up the copy control between the document types:
Source document type: ZM05
Target document type: ZM05
In VA41 transaction i chose "Create with Reference" and chose the contract tab and entered Contract "A" number.
In the overview screen the system populates the valid from date as : 01.01.2011 - At item level validity dates is copied same as of contract A.
Second observation is certain material specific data such as material pricing group does not get copied. Client wants such details also to get copied over into the new contract.
Could you please provide your valuable inputs on where we can make the settings to copy the data exactly as it was maintained in the existing contract ?
Thank you
Regards
Siddharth Sridhar

Hi,
Go to tcode: VTAA and set the the pricing type as 'G' Copy pricing elements unchanged and redetermine taxes and you can try again.
If you still dont understand, you can send message to me and I will show you some printscreen as I cant show you the print screen here.
Thanks.

Inquiry to Cash Sales Copy Control

Dear Experts,
My customer has a problem when creating a Cash Sales Order Type using VA01 Create with reference to Inquiry IN. There is a error message saying COPYING FROM SALES DOCUMENT TYPE IN TO CS IS NOT SUPPORTED. I have searched on the internet that this has something to do with copy control between document types. Can anyone please kindly assist me with the path in how to enable this configuration.
Points will be rewarded for correct answers.
Thanks in Advance

Hello,
Yes... you need to maintian the copying control between the docuemtn tye IN and CS.
SPRO --> Sales and distribution --> Sales --> sales docuemnts --> Mantian copying control.
Check some of the existing copying control, you will get an idea how to maintian the same.
You need to maintian the item category also.
Prase

Copy control Settings from a Quotaion to Value contract/Quantity Contract

Hello Friends,
I would like to know whether it is possible to create a Value/Quantity contract in R3 with reference to a Quotation,Currently I am not able to see the copy control settings between quotation and Value/Quantity ,Also it help me a lot if you can provide me the copy control settings -Header and Item level
Thanks and Regards
Mohammed Roshan

if you run VTAA you would try to create a copy control as follows:
source: QT (quotation)
target: CQ (quantity contract)
say, take the existing record QT->AA (just an example) highlight it and hit 'Copy As'. Type 'CQ' in Target SalesDocTyp field.
hit Enter. Hit 'copy all'. (if you get a message regarding the "-" or "+" quantityt set this field blank (empty)
save it and test.
good luck!

Copy Control of Biling Documents

Hello i am having trouble in coping invoices (f2) to invoice list (lr).
The invoice list is crated but the conditions of the invoice is not passing to the incoice list.
I think the problem is in the copy control.
Can some one show the settings of the copy control between them?

Please see here:
/message/1752775#1752775 [original link is broken]
Thanks,
Feank

Copying control: Delivery to Billing

Hi,
I´m having problems concerning copying control between deliveries and billing documents.
I already maintained the proper copy data in Tcode VTFL either in header and item levels, but I´m still getting the error message "the document is not relevant for billing".
I don´t know what I´m missing here.
Regards.

Hi
Please check in the Item Category(VOV7) - for the field BILLING RELEVANCE. This could be Order related Billing. Change it to Delivery Related Billing and try. It should work if all your configurations are correct.
Thanks,
Ravi

Error in copy control

Hi All,
Need input if anybody has any idea or come across such kind of an error earlier.
New order type, new del typ and new item category.
Sales order created perfectly and giving error message in creating a delivery, showing error in copy control.
Checked the setting are alike the standard ones.
Copying is not poss.because an entry is missing in Table TVCPL: & & & &
Checked the table TVCPL too and the entries are there but still showing the same problem.
Let me know, if yu guys have any idea or come across such kind of thing earlier.
Thank you,
Sharath.

Hey,
I had the same error and I was looking around for a solution, I think what he was saying ( previous post) is that you need to check the item category of the sales order and make sure it is configured correctly. My issue was I was creating a sales order (consigment) and the item category should be ZELF but it was something else (another item category) when i changed it to zelf as is in the config , i was able to create the delivery.
check your item category then use VTLA t-code to make sure the config settings are correct.
I hope that will help.

Re: Errors in copy controls

Hai SDN Members
In VL01N AFTER entering shipping point and order nu if i enter
<b>No OF copying ref is missing for table LIPS in ttable TCVPL</b>this error message is displayed.
pl find me ths solution.Points Rewarded
regards
anand

Pl maitain the copy control between the sales order document and delivery at both header level and item level.
Spro->img->logistic execution->shipping->copy control ->specify copy control for deliveries
Order requirement at header -001
check item numeber check box.
At item level
Order REquirement -101.
check update document flow
positive/negative qty - +

SD:-copy control, no. range, Message no. V1331

Similar Messages

Maybe you are looking for