SD copy control (routines) in ECC6 executed more than once.

We're upgrading from ECC5 to ECC6.
An SD custom "copy routine" in VA01 (SAPMV45A) is being called twice in ECC6 (incorrect) but only once in ECC5 (correct).
The result is that the same informational message displays repeatedly and users have to press the <enter> key many times.
Any of you encounter this behavior?
Thanks
Leo

- In which of these [User Exits In Sales Document Processing|http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm] is the message sent ?
- Also check once again those user exits in SPAU
Regards,
Raymond

Similar Messages

Performance... Why a function column in a view is executed more than once...?

Why a function column created inside a view is executed more than once when called more than once?
EXAMPLE:
create or replace view aux1 as
date_column,
any_function(date_column) column1
from any_table
create or replace view aux2 as
column1 c1,
column1 c2,
column1 c3
from aux1
select * from aux2
It will execute 3 times the function any_function... logically the value will be the same for all columns...
I understand why!... are 3 calls... but...
Why not to create a "small" verification and if the function column was execute replace the second, the third... value? ... instead of execute 3, 4... times...
tks
Braga

Actually, this is more than a performance issue. This is a consistency problem. If the function is NOT deterministic then you may get different values for each call which is clearly not consistent with selecting 3 copies of the same column from a row. Oracle appears to have fixed this in 9i...
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
With the Partitioning option
JServer Release 8.1.7.2.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          93           74
Connected to:
Oracle9i Enterprise Edition Release 9.0.1.3.0 - Production
With the Partitioning option
JServer Release 9.0.1.3.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          78           78Richard

Prepared statement st in servlet - not executing more than once!

Hi,
my problem is that the following piece of code in a servlet does not get executed more than once:
myQuery = "DELETE FROM MREMINDERS WHERE username=? AND reminders=?";
PreparedStatement st = conn.prepareStatement(myQuery);
st.setString(1,usern);
st.setString(2,oldRem);
st.executeUpdate();
st.close();
The above code is called in a servlet to delete fields from a table. I call this code in a for loop from another method in the servlet. It executes the first time in the loop, but the second time onwards it throws an error!!! please let me know how to solve this ASAP since i am at the point of frustration now!!!
thanx...

Hi,
sorry... i got it fixed!!!! :-)
i was closing a JDBC connection which was generating that error!!
thanx again..

Business rules in 11.1.1.3 execute more than once

My client has the situation where certain business rules (launched from the Planning BR interface) will execute more than once, sometimes twice or even three times. It seems that the rule will start to execute and then after 1 or two minutes, will launch again. the job console will show the information.

This is a known issue and has to do with the http timeout settings. Usually this will happen on the 5 minute limit, but it depends what setting they have.
Take a look at this article and see if it applies:
Business Rules That Take More Than Five Minutes to Execute Are Re-launched Repeatedly [ID 755406.1]
Agnete
Edited by: Agnete on Oct 22, 2012 12:51 PM

Query executes more than once

Hello All,
We have crystal reports integrated in the java web application. Reports with parameters are executing query more than once (found in the SQL Server Profiler).
Scenario:
Report query with parameter :- select * from cieuser where id >= {?userId}.
User provides value '1' to this parameter and selects report execution.
Before executing the report, our system updates the database connection details of the rpt with other configured details.
Issues:
During updating of the database details on execution of statement "databaseController.setTableLocation(orig.getTable(i), table);" , the profiler shows:
select * from cieuser where id >= NULL
And on executon of the statement "viewer.processHttpRequest(request, response, getServletConfig()
.getServletContext(), null);" the profiler shows the following:
select * from cieuser where id >= {?userId}
select * from cieuser where id >= 1
select * from cieuser where id >= 1
When the same report is executed from the standalone crystal designer, the profiler shows one time query execution:
select * from cieuser where id >= 1
Environment:
Crystal reports designer - 11.5.10.1263
JRC - 11.5
Please advise.
Thanks,
Ratan.

Hello,
SAP decided to allow the confirmation of orders with a final confirmation (status CNF) deliberately. So it is possible to confirm work that was maybe forgotten or if the flag 'final confirmation' was set mistakenly. Only the status CLSD will prevent further confirmations.
If you want forbid further confirmations of orders with status CNF you can use enhancements CONFPM* or BAdI WORKORDER_CONFIRM. However, the probably easiest way is to define a user status that is set at business transaction 'Confirm order' and, once set, forbid business transaction 'Confirm order'.
Regards,
Reinhard

Backups to same DVD more than once

I have just started to use PSE 7 and have moved all my photos into it. I did the initial backup to a DVD but now that I want to backup my new pictures, it seems to want a new DVD. I don't take all that many pictures so it would take me some months fill up a DVD. It doesn't seem to like DVD-R and with DVD-RW, it tells me there is something on the DVD and do I want to erase it. How do I use PSE7 to backup or copy pictures to the same DVD more than once? Thanks.

As far as I know, one can burn contents to a DVD only once...
If you’re using a DVD-RW you have to erase the old contents first...
On can burn a CD several times until filled up though...
You might consider using an external Firewire Hard-drive for your backup...?
Regards
Nolan
PS:
Please check this one out...
http://freeridecoding.com/burnagainfs/
(guess, "Windows" offers something similar...)

Error after migrating new copy control routine

Hi,
I have created a new copy control routine in dev environment. It works fine there. When we migrated the transport to all QA environments getting dumps that the form is missing. I checked the routine and form in VOFM and it does exists. Am I missing a step here or need to do something after migration?
-Minhaj.

go to se38 enter program name RV80HGEN - execute.
You need to generate newly created routines
You have to do this in each client where you transport this.
Edited by: Sampath Kumar on Nov 5, 2009 10:36 AM

Copy control Routine error

Dear Gurus,
I have created a Copy control routine in VOFM to copy the PO date and PO number from Contract to Sale order. It is working fine in DEV server but while transfered to QAS it is tiving a DUMP error . I have moved the functional and WB requests to QAS.. Still getting error, what could be the problem.
Regards
Praveen......

Hi Praveen,
VOFM routines will not be automatically activated when you move the transports from one server to other server. You need to run report RV80HGEN in your quality as well as in production server to activate the new routine. Please note that when you move the transport to your produciton system, run it in business-off hours as the report runs for a long time
Thanks,
Srini

IC billing without PGI(Copy control routine 14)

Hi,
I have to work with copy control routine,but i don't know how to create or to work with copy control routines , so please tell me how can i do the task mentioned below.
Task is: While the user is creating intercompany billing document with "document type IV" ,system would allow the user to create billing even though post goods issue for intercompany delivery is not carried out.
SAP Object:
Copy control routine--RV60B901
Moderator message : Spec dumping / outsourcing is not allowed, search for available information. Thread locked.
Thanks in advance
Edited by: Vinod Kumar on Jul 29, 2011 9:59 AM

hi,
surely new coding is required for item level Billing plan copying from order to order,
you can copy the 402 requirement do the changes according to your requirement by the help of ABAPERS.

Executing more than one procedures at a time

Hi,
Can any one tell how to execute more than one procedure at a time..
I am trying to run like this..but its throwing an error...can anyone please suggest?
CREATE OR REPLACE PROCEDURE HYSXM.QA_AUTO_RETURN_FINAL IS
i EVENTS_TEST_DATA%ROWTYPE;
BEGIN
DELETE FROM TEST_EVENTS;
COMMIT;
for i in ( SELECT RADIO_ID,EVENT_TYPE FROM EVENTS_TEST_DATA )
LOOP
QA_AUTO_INSTALL(i.radio_id,i.event_type);
QA_AUTO_RESOLD(i.radio_id,i.event_type);
QA_AUTO_RETURN(i.radio_id,i.event_type);
END LOOP;
END QA_AUTO_RETURN_FINAL;
/

what error message is being returned??

Execute more than one thing at the same time.

Hey why every time i want to execute more than one thing(create tables) at the same time
it say "ORA-00911: invalid character" , i dont wanna execute one thing at a time. check the pic please
http://img370.imageshack.us/img370/5120/oraclesw5.jpg
but in my school i use something called isqlplus and i can execute all the things i want at the same time with-out any error.
im using right-know
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production

1) Unless you are using something like DBMS_JOB, SQL*Plus, iSQL*Plus, the Oracle XE web-based front-end, or any other application is going to execute one SQL statement at a time.
2) There is a dedicated XE forum-- the folks over there might know how to run a script using this particular front-end.
3) Assuming the XE database is on your local system, you should be able to log in via SQL*Plus and use that utility to run your scripts.
Justin

I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

Thanks Shootist007, by blockd files I mean files that I have changed to blocked and when I tried to move then for the first time, I had to unblock again. I am trying to backup my pictures, my songs and other files like word documents and excel tables. First I put all of them as blocked, what caused the first problems on trying to move them. Then, I've unchecked the block option and if I try to move one by one, there is no problem. The issue is to move all together, because it gets stuck in the preparing to copy files step. Anyway, if I cannot do all by once, I'll do it one by one, event though that was not suposed to happen if we are talking about technology, right? Anyway, I thank you again for trying to help me!

How to prevent executing more than one client from a machine?

Hi all,
Currently I am doing a client server project in java. The client is java swing. There is a requirement to prevent executing more than one client from a machine.
Now I am relying on socket for this. I listen to a port, say 15000 and when the second session is started it would give an exception at the socket. I know that this a trivial method. Can anybody please suggest a better method. Also is it possible to bring focus to already executing client, if the user tries to execute the client program again in the same machine?
An early answer to this question is highly appreaciated.
Thanks in advance
SSM

Thanks for the suggestion, but I dont think we can use socket for this. And again if we use file for the same as you described, I think it would sometime create a some serious side effects. Suppose after one client session is invoked, the power goes off. In this case the client shut down is not in the normal sequence and hence we cannot remove the file programaticaly. This creates big problem when the user tries to run client again.
I am really interested to know, is there any standard way in java which can be used to achieve this. Also is it possible to give focus to already executing client program if the user tries to invoke the client again.
Thanks
SSM

I have was moving music from iTunes to a CD, however, when attempting to move a second set of music a error message stating "this is not a blank CD". How can more music be copied to this CD, which has more than sufficient space to be copied to?

I have was moving music from iTunes to a CD, however, when attempting to move a second set of music a error message stating "this is not a blank CD". How can more music be copied to this CD, which has more than sufficient space to be copied to?

I have was moving music from iTunes to a CD, however, when attempting to move a second set of music a error message stating "this is not a blank CD". How can more music be copied to this CD, which has more than sufficient space to be copied to?

Execute more than 1 function from process code IDOC

Hello,
Is it possible to execute more than 1 function via process code of an IDOC?
I am talking about inbound IDOC.
Sara

Hi Sara,
What is the exact requirement.
Regards,
Madhu.

SD copy control (routines) in ECC6 executed more than once.

Similar Messages

Maybe you are looking for