SD delivery goods issue of Quality inspection stock

Hello, anyone know whether SAP allow goods issue of quality inspection stock?
If stanrdard customizing not possible, any user exit ?

Hi
No sap not allows GI for QI stock
Beacuse Once Stock in QI without inspection we can't issue goods
Hope ths helps
Please reward points
Sunil

Similar Messages

  • Goods issues to Quality inspection

    Dear friends,
    I have deactivated QM not active(Removed the check ) in IMG/Quality management/QUality inspection/Deactivate movement types for QM for the movement type--103.
    So while GR-MIGO-ins.lot is created and QA32--QM people placed in Unrestricted stock.
    So through 105 automatically material is placed in Quality inspection.
    Requirement is that for Goods issues also Material has to be inspected by QM.
    Then I deactivated for movtype-201, Then Qualty inspection lots are created.
    But I do 201,material stock is reducing but Quality inspection lot is creating.
    But Material shall not be issued,it shall be through QM after relasing only issued to cost center, similar to Goods reciept.
    How it can be done,
    please suggest.
    Regards,
    Canand

    Hello Anand,
    if I understand you correctly you are creating Inspection lots of the 02 inspection origin, and you want these to be stock relevant.
    This is not possible only certain inspection lot origins are stock relevant i.e. 01, 04, 05 and 08.
    I hope that this puts more light on the issue.
    Regards,
    Isabelle

  • Delivery  is accepting material in Blocked & quality inspection stock

    Hi Experts,
    During delivery ( VL01N) the system asks for Serial Nos for the delivered Material and serial Nos are assigned by going to Extras--> serial Nos. and PGI is completed
    In this process the system could able to take the serial Nos that are in Blocked (07)or Quality (02) state also apart from the Unrestricted Use.
    How can we restrict the system to prevent selecting the stock/material apart apart from 01 state ( i.e unrestricted use)
    Regds
    Rajiv

    You have customize that availability check which runs behind delivery to check what are the stock available.
    You have to make sure u unchecked the quality inspection stock and blocked stock
    thanks

  • How Goods Issu happens in the Stock transfer process with outbound delivery

    Hi,
    Can you please explain me how the goods issue happens in the Stock transfer scenario with outbound delivery?
    can we use VL02n for goods issue for single delivery doc(Delivery type-RL).
    Can we use the transaction VL23 for collective processing of goods issue for stock transfers.
    Thanks

    Hi Anil,
    ->You can use VL02N transaction to do PGI for the outbound delivery in the Stock transfer scenario.
    -->But you have mentioned that delivery type is RL -is this returns delivery
    Normally NL delivery will be used in STO(Rplenishment
    delivery)
    -->You can use VL06G transaction for collective PGI
        The transaction VL23 for delivery schdule in the back ground
    I hope it will help you,
    Regards,
    Murali.

  • Good receipt in quality inspection

    hi gurus
    i have maintained quality inspcton set up in material master data. now when i do good receipt it is posted in quality inspecton stock. now query after quality inspection how to take stock from quality inspection stock to unrestricted stock .in between this how to do quality usage decision so that rejected material can be returned and  for accepted material invoice cen be posted.if some one have snap shots for usage decision please send it my mail id 
               [email protected]
    points will be rewarded.thnks

    HI,
    Go to QA 32 , you can see the list of inspection lots .
    You can do result recording & Usage decision.
    During usage decision , you can do the stock posting (Unrestricted , returm delivery)  from the stock posting tab in UD screen.
    Ref the link below for more details.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/QMIMUD/QMIMUD.pdf
    Hope this helps you.
    Regards
    K.M.Arun

  • User moved Quality inspection stock from sloc 290 to 295 via Migo_tr(311)

    Issue -User moved Quality inspection stock from storage location 290 to 295 (no Quality) via Migo_TR(311)
    Now they want the "Q" status to be reflected under storage location 295 ,pls help how it can be done.
    Background- RMA processing was correctly performed for this stock .from RMA # >inbound delivery >PGR >create & confirm TO>QA11 >LU04 and LT12 that bring the stock to storage loc 290

    Explore mvt type           " 323 "     Transfer posting quality to quality within plant

  • Quality inspection stock

    Hi experts ,
    Whenever a material is procured from a particular vendor then at the time of posting goods receipt that material by default to be posted in Quality inspection stock alone not in Unrestricted use stock,i.e. posting in unrestricted use stock should not be allowed at all . If the vendor going to differ means then it can be posted in Unrestricted us stock .
    Kindly help me how to do this.
    - Neo

    Hello Neo,
    There are two options in this case,
    1. If using QM module, then as suggested by Srinivas, you need to maintain QM info record for the vendor which are subject to Quality material.
    2. If you are no using QM module then you need to flag mark "Post to Inspection Stock" check box in purchasing view of material master. But in this case, the material will be posted as QI stock for all the vendor, however you can change it during PO and GR.
    Hope this helps.
    Regards
    Arif Mansuri

  • Sto stock to Quality Inspection stock

    Hi,
    I want Sto stock to Quality Inspection stock.Then i want Quality Inspection stock to production purpes
    I want return stock to Quality Inspection stock.then Quality Inspection stock to normal stock

    HI,
    For the material to go into quality stk,in the puchasing view of material master for the receiving plant tick the post to inspection  stk & save.
    Then do the STO the material will come automatically into quality stk.
    Even if u dont tick in material master still u can receive the matl in QI stk when doing migo by selcting the QI stk.
    After receiving the matl u can move it by using tcode MB1B & mvmt type321 to Unrestricted use.
    IN SAP only the unrestricted can be issued to production.
    Edited by: Murugan mgl on Aug 13, 2009 8:15 AM
    Edited by: Murugan mgl on Aug 13, 2009 8:16 AM

  • About goods issue from vendor consignment stock

    Hi, I meet some issue needs your help!
    The outbound delivery needs to post goods issue from vendor consigment stock directly. then how to choose which vendor's
    stock for this delivery base on the actual process?
    thanks
    Best Regards,
    Rory

    Hi
    In R3 it is not possible
    If say material X is 100 units lies in your premises the vendor  consignment stocks (the vendor property lying in your premises ) and out of that 100 units if you are making a sales order and then a goods issue means it is not possible
    To sell that material you need to make it your own stock ( that is transfer from vendor consignment to your own ) as good as buying that stocks and then sell it
    But the same scenario is possible in IS retail
    For this iS retail server is reqd
    In Retail you can play with vendor consignment stocks as much as possible without making our own stocks
    You can search SAP library regarding the settings of the same
    http://help.sap.com/erp2005_ehp_04/helpdata/en/c6/af3c415e5dde2be10000000a1550b0/frameset.htm
    Regards
    Raja

  • OMJJ - Where I diferentiate "Stock quality inspection" -  "Stock unrestricted use"?

    Good morning, experts!
    I need to know how to set up a move for the input material in quality stock, without having to use the QM or configure the material. We have the standard movement 503 that is received at the stock in quality inspection and the movement 501 that the entry into stock unrestricted use. In what field of transaction OMJJ I make this differentiation?
    I appreciate your help.

    Hi,
    If one you use 501 the stock is sent to Quality inspection, then this could happen because you have checked the Post to Insp. stock indicator in the material master (Purchasinf view).
    Post to Inspection Stock
    Specifies whether the material is subject to quality inspection (without inspection lot processing) and whether a goods receipt is posted to inspection stock. The indicator is copied to purchase order items and goods receipt items as a default value.
    Dependencies
    You can select this indicator, if no stock-relevant inspection type has been selected in the inspection setup, and therefore no stock-relevant inspection lots can be created.
    If you activate a stock-relevant inspection type, the entry in this field is deselected and can no longer be maintained. In this case, a corresponding indicator in the inspection type controls whether goods are posted to inspection stock.
    When you use 501 the stock should be posted as unrestricted stock, then you can move the stock from Unrestrected to Quality Inspection stock using movement type 322 (use t-code MB1B).
    With movement type 321 you can move from  Quality Inspection stock to Unrestricted.
    Kind Regards,
    Mariano

  • How to use quality inspection stock

    Hi,
    Plz tell me How to use quality inspection stock.can i use quality inspection stock for any transaction directly.
    Now i have 100 quality inspection stock is there.but i am not taking these stock to unrestricted use stock.i want use these stock to all transaction like 301,303,309.......
    it is possible or not

    hi
    Use t-code MB1B to transfer stock from quality inspection - unrestricted-use stock
    Movement Type 321 Transfer posting stock in quality inspection - unrestricted-use stock
    The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here you can post the quantity to another storage location.
    You cannot use this movement type for QM-managed materials since transfer posting for these materials takes place via the usage decision.
    Possible special stock indicators: E, K, O, Q
    u2022 K Goods receipt for purchase order to consignment stock
    u2022 O Goods receipt for purchase order to stock of material provided to vendor
    u2022 E GR for purchase order or order to sales order stock
    u2022 Q GR for purchase order or order to project stock.
    regards
    Vishal

  • FG material in Prod Ord once 101, goes to Quality Inspection Stocks

    Hello,
    I would like to ask, why does one of our Finished Goods in our production order once confirmation 101 was done to it, the stock went to the Quality Inspection Stocks? We have check its material master data Quality Management Tab and below are what we see on it:
    in the Procurement Data Section:
    QM proc. active was TICK
    QM Control Key = 0000 (No active functions, info message)
    in the General Data Section:
    Inspection Setup was not TICK (no inspection set-up was maintain for the finished goods)
    That is why we wonder why it still been cue to QI stock once 101 was done? how could we check this and where else does this things occuring? please guide and help us to resolve the problem of ours.
    Thanks

    Hi,
    Is this inhouse produced or the Extenally procured material.
    in case externally produced material check the Qinfo record for the same also.
    reg
    satheesh

  • Work Order Issue - Error Creating Goods Delivery,Goods Issue or GRPO

    We use SAP Business One 2007 A PL:08. We have an add-on for the work orders and While putting the work order from released to completion, a user is getting an error message that says:
    "Error Creating Delivery,Goods Issue or Goods receipt PO- Error Issuing Delivery Note -Item no. is missing [DLN1.Itemcode][Line:3]"
    I do not see any item missing in the work order and all the posting periods are open. I have checked all possible settings!!
    Any idea what this could be?
    Thanks

    Hi,
    Is it your add-on or a 3rd party add-on?
    Thanks,
    Gordon

  • Change stock from unresticted stock to quality inspection stock

    Hi,
         I have a material with Qualtiy View.we have done G.R. & also made UD & now my material lying in unresticted Stock.but now i want to cancle the G.R..
    What is the procedure to change stock from unresticted stock to quality inspection stock through quality module.
    Regards
    Pavan

    Hi
    user Exit QEVA0008  in SMOD you can check the documentation.
    Module for Editing Customer Function Code
    This user exit allows you to activate a function key in the menu for the
    usage decision.
    You can freely define the description and function associated with this
    function key (+FC1).
    You can use this feature, for example, to revoke (reset) the usage
    decision.
    Refer to the documentation for function module EXIT_SAPMQEVA_008.
    Functionality
    This function module is called if the freely defined function (+FC1) in the menu for the usage decision transactions is called up. A prerequisite for this is the activation of the user exit QEVA0008.
    Example
    Using this function module, you can reset the usage decision in transactions QA12 ("Change usage decision with history") and QA14 ("Change usage decision without history").
    Include LXQEVF10 contains sample coding for resetting the usage decision.
    Notes
    Business transaction QM68 is available for this function in the standard system. You can display a where-used list for this transaction in transaction BS33 (Display transactions).
    If business transaction QM68 was carried out successfully, the system sets the inspection lot status "UDRE" - usage decision reset (system status I0297). You can display a where-used list for this status in transaction BS23 (Display system statuses).
    If you want to use the function to reset the usage decision, be sure to consider the following points:
    If a vendor is released (status profile in the quality info record), an update is carried out only once; this means that if the usage decision is reset, the status in the supply relationship is not corrected.
    If you make the usage decision again, the inspection results will also be transferred to the batch classification.
    The quality level is updated only once (when you make the initial usage decision). If the usage decision is changed, the quality level is not updated.
    Regards
    Sujit

  • Unrestrected use stock to quality inspection stock

    Hi,
    plz tell me how can transfer Unrestrected use stock to quality inspection stock for same material and same palnt

    Hi Prasad, Make sure that inspection type 08 is assigned and activated in Material Master's QM view. Then you would be able to move the stock from unrestricted to quality using MB1B (Mvt/Type 322).
    Also check : Stock Reversal - From Unrestricted to Quality
    Edited by: m_n_novice on Sep 5, 2009 2:02 PM

Maybe you are looking for