SD Document Changes Issue
Hi,
We have a special scenario in our system in which one contract is used for multiple sales orders, but once contract item is referenced to sales order, the contract item data should not be changed (While change of the other items is possible).
Therefore, we would to inspect the available possibilities:
1. Block SD document for changes, except for adding new items (which must be enabled).
2. Block SD item which is partially completed for changes.
3. Allow creation of new reference documents for item with status completed.
Is one of these possiblities is possible?
Thanks in advance,
Shai
Hi ,
As per ur requirement i under stood that
1) once sales order is created with reference to contract, the line item of that sales order shuld get greyed, it means we cannot change the quantitY, but it will accept the new item in the new line item,right,
For this we can maintain in copy control, llike completion rule, even in item category we can maintain,but they will give only warning message, if the user wants to enter more stock than in the contract it will accept.
So, this can be done through userexit, take the help of ur abaper.
Hope this also wud be useful for u
regards,
ram.
Similar Messages
-
Lockbox - SAP document clearing issue
Hello all,
Me along with our functional consultant are trying to figure out a lockbox document clearing issue and hope you could through some suggestions in. We are using FLB2 to clear SAP documents by using different search rules for invoice numbers on FLB2. Right now we have 5 different kinds of search rules based on document number (BELNR) and reference document number (XBLNR). We are able to clear the documents successfully if we have either document or reference documnet numbers in our input file using one of these 5 search rules. But now we would like to clear the documents also based on document assignment number (ZUONR). We tried few assignment numbers in the input file with all 5 search rules but FLB2 is not clearing any SAP documents. We are not sure if we need to have a new search rule specific to clearing the documents based on assignment numbers or how to create more search rules. Could you please suggest us if you have any thoughts on this?
Thanks,Change AVIP-SFELD as ZUONR (for assignment number) and then put actual value you received in lockbox file in field AVIP-ZUONR. That way, payment advice is created for this check with value in assigment field and program will look for matching value in AR in assignment field.
Also usually if customer is not found based on MICR number or based on match found using Doc# or Ref#, system will update AVIK / AVIP-KONTO as "*", so you need to search for customer number also and update it here.
Hope this helps. -
Document changes place in meeting workspace
We have a recurring events meeting workspace in SharePoint 2010. If we upload the document for some date, this document is found on that meeting events folder in document library. But after some days that document changes place and it is found in the first
meeting event's folder. This is very random behaviour.
Any idea on this issue?Hi ,
According to your description, my understanding is that Document is
moved from one meeting event’s folder to the first meeting event’s folder in your meeting workspace.
I try to reproduce your scenario in my SharePoint 2010 environment but it is fine. For your issue, you can go to your meeting workspace document library -> document library settings -> advanced settings,
clear the Custom Send to Destination setting.
If your issue persists, you can delete the recurring event and re-create it with workspace and see the result.
Here is a blog you can have a look:
http://www.sharepointanalysthq.com/2012/07/dealing-with-documents-for-irregularly-recurring-meetings-in-sharepoint-2010/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support -
Adobe Reader XI I cannot open pdf documents, change or delete the program
Hi, After installing Reader XI I cannot open pdf documents, change or delete the program! please help
ilana.
Sorry you are having issues with the forum. I wasn't asking you for your information. You may be subscribed to all of the threads if you got this.
I would suggest going to the "forum comments" forum and seeking help there.
It's here ---> Forum comments -
When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version. -
Photoshop CS4 new document dialog issue...
http://img50.imageshack.us/img50/7835/optionpu6.gif
Can this Photoshop CS4 new document dialog issue be improved? Info in the pic.there's a feature request section at the top of the fourm allen. these kinds of posts should be done in there, so the programmers and engineers at adobe have them all in one place.
-
I think I solved my time changing issues- hope this helps
Hey everyone, I think I've had some success with my time changing issues. I originally posted this to another user as a follow up to her question, but I'm reposting it here. Hope it helps:
"msteinny,
So i went to the apple store to meet with an apple genius to ask him why my phone's time kept moving up 1 hour everytime I synced my phone. Well he said that he's never seen this problem before, and after a trying a reset and restore he let me exchange my phone. The problem is that when I went to sync my new phone the problem still persisted. They told me it was probably something to do with my computer and its time zone settings.
So I get home and click on my computers clock in the bottom right hand corner to bring up the date and time properties and sure enought my time is correct, the date is correct and the time zone is correct (Eastern Daylight Time). So I look through the different tabs (Date & Time, Time Zone, Internet Time). The first thing I tried to do was to change where my computer syncs its internet time. It was originaly set on NIST time. I then switched it to Windows time, but this didn't do anything. My clock would still change when I synced to itunes. The next thing I tried was fideling around in the Time Zone tabs. I noticed that the box that says "Automatically adjust clock for daylight savings" was unchecked, so I checked it and my computer's time jumped an hour ahead. So I left the box checked but moved my clock one hour back (to the correct time), clicked on apply and left it at that. I synced my iPhone and voila! The time didn't change! It stayed on the correct time! To to make a long story short, make sure that you computer's clock is set on "automatically adjust clock for daylight savings changes, make sure your time zone is correct, and that the time is right when that box is checked. I hope this helps you. I'm glad I got a new phone out of the deal;)
Chris P. "As I mentioned in my post, whenever I checked that box the time would be incorrect. It would move up an hour. I've messed with this along time ago, way before I got my iphone. I think this had something to do with the daylight savings change that was implemented this year or last year. I dont remember if I never tried correcting it before, or if I couldn't, but this time I didn't have any problems correcting it. Anyway, since I couldn't correct it back then, I just left the box uncheck and decided that I would change the time manually when the next time change occurs. But it seems to work fine now so all is well.
-
Documents in Firefox format do not open automatically in the preview pane. Why? Also, I don't want my documents changed from the original format. How do I change them back and how do I keep this from happening again. I don't want to have to select a different format every time I try to open a document. That is a pain in the neck. I want to "click to open" and the document be in it's original format. If necessary I will go back to one of the other browsers I have used in the past. As I don't want multiple browsers on my computer it would be necessary to uninstall Firefox. I like it so far other than you all hijacking my documents and altering the way they open. You also might want to remember that even the "legitimate" folks on the internet are seen as predatory, i.e., gathering information, tricking us into installing crap we don't want or need, and in some cases, requiring a specific program to open a specific document. I'd be working very hard to show you are trustworthy. If you have a solution to this and it is complex then you will be wasting your time and my time trying to explain it. You guys created this so, if I'm going to use Firefox, you fix it on your end. FYI, if I have to uninstall Firefox I will, when asked, strongly recommend against using your service. Thank you.
Do you mean PDF documents?
The installer was supposed to add Firefox as an ADDITIONAL viewer for PDFs, not as the DEFAULT viewer. Sorry you were affected by this glitch and hopefully they will figure out why some systems get changed this way.
You can try this fix suggested by a user in another thread:
# Open Adobe Reader / Acrobat*
# Edit->Preferences
# In the Categories column click 'General'
# Near the bottom of the page click the button marked 'Select Default PDF Handler'
# In the dialog, select 'Adobe Reader XI' (or Adobe Acrobat, as the case may be) and click 'Apply'
# A Windows Configuration screen will appear. Allow it to do its stuff (takes a few minutes), then restart your computer when prompted.
Does that work for you?
''*'' If you do not have Adobe Reader 10 or 11, you can install it from here: http://get.adobe.com/reader/ -
We are trying to work on a group report through Workspace and wanted to check if the administrator can get real time updates on document changes within the Workspace. I can be reached at [email protected] Thank you.
Hi Mr. Modi,
Can you clarify your scenario properly that I can analyse it to give you proper solution....I am confuse with your requirement and example which you have given...
Cheers,
Sagun Desai.... -
Document change via workflow log.......
Dear all
In our scenario, I am creating a word document in workflow.After creation its going to first level approver for his decision.consider he is not executed the doc.
When I check the status of document from the workflow log(from :Work item executed by me), its allowing me to change the doc.If I made any changes its updating the document,which is already waiting for decision.......Is this correct?Is there any possibilities to restict the document changes from the workflowlog view?
Not only for Word doc.......other doc also.........I feel you can restrict this by putting some authorization. May be there is something you can restrict in the HOLD Document option.
Thanks
Arghadip -
How can I send scanned files, which are documents changed from doc to PDF, as documents that can be edited if the recipient doesn't have Adobe capabilities?
Hi flaviusjack,
If you still have the .doc files, it might be best to send those to your recipients so they can be edited. Otherwise, you can use ExportPDF to convert the PDF files back to .doc format. But, again, that step would be unnecessary if you have the .doc files.
Best,
Sara -
History Documents, Change Documents and Potential documents in PGS
What are History Documents, Cleared documents, Change Documents and Potential documents in PGS.
I need to retrieve history documents from tables BSIK, VBKPF and RBKP. Which fields are considered as History documents from these tables?
How to retrieve Cleared documents from Table BSAK? Which fields from this table can be considered as cleared documents.
How to retrieve Change documents from Table CDPOS? Which fields from this table can be considered as change documents.
How to retrieve Potential duplicate documents from tables BSIK, VBKPF, RBKP? Which fields from this table can be considered as potential duplicate documents.In order to include audio and video, you need to export it into a format that supports this, and you need to have a program to open it that supports audio and video in exactly the way it was included (not all flavors of format have the same features).
PDF does not do this. I'm not sure about .doc (but I doubt it).
EPUB does support audio and video, but I have no idea how easy it is to use (nor how reliable). -
Hi sap guru
Can i creat the document change rules (line item) for USER LEVEL is this possible in SAP
please help me
vivekNO..
You better maintain Role (Authorization) for the users..
Regards,
Chintan Joshi -
Which table contains - FI Document Changes?
Team,
Which table contains - FI Document Changes?
Please be specific; For example:
CDHDR:
OBJECTCLAS ?
CDPOS:
BJECTCLAS?
ABNAME
ABKEY
HNGIND
ThanksHello
The OBJECTCLAS is BELEG.
Use FM CHANGEDOCUMENT_READ_HEADERS
with objectclass = 'BELEG'
objectid = (concatenate client + company code + doc no + fiscal year)
Then loop at the header and use FM
CHANGEDOCUMENT_READ_POSITIONS
to get the CDPOS values
Hope this helps
Shounak
Message was edited by: Shounak Mukherjee -
Dear Experts,
Is there anyone who knows the name of BAPI function for FI document change?
Thanks.
BR,
Chris KimHI,
Unfortunately there is no BAPI avaialble for this purpose.
Regards
Ravinagh Boni
Maybe you are looking for
-
I signed up and purchased a discount plan of Creative Cloud Complete for $40/mo for the first year on Black Friday (11/28/14). I downloaded the Creative Cloud desktop app as well as Lightroom and Photoshop a few days later when my new computer came i
-
How do I start a new icloud account on my phone if I forgot my password for my current one?
How do I start a new icloud account on my phone if I've forgot the password for my current one
-
The space bar does not work to activate the hand tool with Photoshop CS6
Bonjour, J'ai un petit souci sous Photoshop CS6 et je n'ai pas pu le résoudre malgré mes bouquins, et mes recherches sur Internet. Il s'agit de la barre espace qui ne fonctionne pas pour utiliser l'outil main. L'outil main fonctionne bien quand je le
-
How do I get my external swf to load in the release build?
My external swf loads in the debug build, but not in the release build. How can this be fixed? Thanks, Doug
-
Authorization report cats_da
Hi, The authorization report CATS_DA working with my client in such a way where my client is getting report on the employees working under him but he requires his name to be included in the report. regards amar