SD Document Flow is not been Updated

Hi,
I am using MB_CREATE_GOODS_MOVEMENT and MB_POST_GOODS_MOVEMENT to create Goods Movement.
These FMs create the Material Document, but they don't update the Delivery flow.
Manuaaly goods issue is done through VL02N and it updates the document flow.
Note:- Bapi_goodsmvt_create cannot be used as it doesnot support movement types 643 and 644.
Please help.
Regards,
Nitesh.

hi , run this fm in a series like
se37 : in menu tool bar ; function module -
> then test ---> test sequence enter your function module in the next sequence enter fm name as bapi_transcation_commit . end run the fm then it may slove the prb
why because data base table are not updated with out using commit work . some times orders created means fm are executed successfully and it generate order number s but those are not avalible in Data Base tables . so please try it once
if your problem is sloved plesae close the thread
Regards
Siva

Similar Messages

  • Document flow is not getting updated in SD in BW side

    Hi all
    In SD , we r cancelling an invoice .Doc type =  S1. Again , w r posting an invoice ,for the cancelled document . But in 2LIS_13_VDKON ,  after cancelled document , new billing documents are for the cancelled billing not updated. that is new billing for that cancelled billing .
    Please help us to solve this issue. How to overcome this scenario?
    Thanks and Regards
    Karthik

    Hi Cristine,
        Thanks for your time spending on my request.
        Now, we could able to transfer the data between GTS7.2 to ECC6.0.
        But for some reasons, If the Ship-to Country is CA and Sold-to Country is US then the document in GTS is in Incomplete state. There we found that, Sender function is not getting added to GTS Document while creating document in GTS. When we manually add Sender to the partner in the function then it is turning to complete state.
        Here, we couldn't able trace where the mapping is done for this and also where the additional Sender function is getting added.
        So, pls help to advise on this as well.
    Thanks & Regards,
    Sudhakar

  • HT5622 I am the owner of my iPhone 4 and it had not been updating and allowing me to download apps. So I decided to do factory setting, before doing so I had backed up my phone on my computer then I had erased everything from my iphone. But now I want to

    I am the owner of my iPhone 4 and it had not been updating and allowing me to download apps. So I decided to do factory setting, before doing so I had backed up my phone on my computer then I had erased everything from my iphone. But now I want to start everything from the beginning, and on my setting my Apple ID is present however when I put my password in it doesn't let me log in. The message that I receive says that I would have to remove my Apple ID  as it will not let me log in with that I'd even though I am the original owner, I have tried  everything on find my iPhone as well, even there my Apple ID not showing on the devise.
    If anyone has had a similar experience could you please advise me on what to do,
    Thanks

    You must have the credentials that were used to turn on Find my iPhone on the device. Without them, you can not get past the activation lock.

  • The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    Hey there Luba_kalstad,
    It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section down toward the bottom if needed:
    Unable to locate a Wi-Fi network
    Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
    Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
    If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
    Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • HT201317 My Photo Stream is on my Windows 7 PC has not been updated

    My Photo Stream is updating regularly from my iPhone 4 to my iPad, but My Photo Stream on my Windows 7 PC has not been updated for the last four months. Any suggestions?

    Hi dDub_DW,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with Photo Stream on your PC:
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/ts3989
    Cheers,
    - Judy

  • Updated to iOS 5 and now photos sent with text message show as sent, but are not received to an iPhone that has not been updated.

    Updated  to iOS 5 and tried sending a message with a phot to an iPhone that has not been updated. My message shows as sent, but neither the text or photo are received. Text alone works fine.

    This is being caused by using the same Apple ID for iMessage.  To fix this you have two choices:
    On all but one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID.  Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
    On all of the phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".

  • Error: Permission denied for (document.domain has not been set) to call method Location.toString on (document.domain=).

    Why am I getting these errors Error: Permission denied for (document.domain has not been set) to call method Location.toString on (document.domain=).
    == URL of affected sites ==
    http://

    HOW DO YOU SET THIS??? I'M FRUSTRATED OVER THIS. ITS BEEN 2 MONTHS SINCE I HAVE BEEN ABLE TO PLAY ANY GAMES IN FACEBOOK DUE TO THIS PROBLEM! IT DOES NOT MATTER WHAT BROWSER I USE I STILL GET THIS SAME MESSAGE.

  • When I try to open Adobe InDesign, I get this message: Adobe InDesign terminated because of a serious problem/ fault. Start again to restore work in InDesign documents that has not been archived.

    What can I do to start the program again, when it does not answer? The only message I get is that there is a serious problem.

    Thanks a lot for your quick reply! However, it works again, after a restart!
    Best regards,
    Hans
    Hans Storhaug
    Director
    Norwegian Emigration Center
    4005 Stavanger
    Norway
    m  +47 908 31 097
    9. juli 2014 kl. 10:57 skrev Mylenium <[email protected]>:
    When I try to open Adobe InDesign, I get this message: Adobe InDesign terminated because of a serious problem/ fault. Start again to restore work in InDesign documents that has not been archived.
    created by Mylenium in Adobe Creative Cloud - View the full discussion
    Without knowing anything about your system, nobody can advise. In any case, the ID forum would be a better place to ask such questions.
    Mylenium
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6535011#6535011
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I have just had a large set of updates to my CC Apps, why have InDesign CC, Illustrator CC, Photoshop CC, Dreamweaver CC and Muse CC NOT been updated but a new version has been installed (2014)?

    I have just had a large set of updates to my CC Apps, why have InDesign CC, Illustrator CC, Photoshop CC, Dreamweaver CC and Muse CC NOT been updated but a new version has been installed (2014)?

    http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
    -This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
    -so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
    If you are sure you don't need the old CC programs
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

  • Listener.log not been updated

    I am on linux x86 OEL4.
    using 10.2.0.3.
    My listener.log is not been updated since the 30 May.
    Weird.
    /opt/oracle/app/oracle/product/10.2.0/db_1/network/log
    [oracle@juk-prod log]$ ll
    total 4203424
    -rw-r--r-- 1 oracle oinstall 4294967428 May 30 21:49 listener.log
    -rw-r--r-- 1 oracle oinstall 5123274 Sep 16 12:29 sqlnet.log
    if i do status in lsnrctl:
    Listener Parameter File /opt/oracle/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Listener Log File /opt/oracle/app/oracle/product/10.2.0/db_1/network/log/listener.log
    everything seems fine.
    This database gets lots of connection per minute.
    whats going on?

    i fix the problem by doing:
    SET LOG_FILE list.log
    now i get information in list.log
    any idea why it would stop logging info once the log was at 4gig?

  • How to find photos which have not been updated to the current Process Version?

    How can I search and/or filter to find photos which have not been updated to the current Process Version?  I would like to get a list of the photos rather than going through them one by one and looking for the lightening bolt.

    Thank you!  As my memory fades, it is good to know that my memory is backed up with you and others on this forum!

  • HT5457 my iphone 4 has not been updated since purchase almost a year ago.it does not have the software update option in settings. how do i get to update? settings. How do I update it

    My iphone 4 has not been updated since I purchased it a year ago. When I go to settings to click software update as per instructions, the software update is not listed. How & where do I go  to update my phone?
    Thanks

    You'll have to use iTunes on your computer to get your iPhone to the latest version of iOS. From there you'll be able to update directly from the iPhone for future releases.
    http://support.apple.com/kb/HT4972
    Regards.

  • Login denied valid AV software not found or AV signatures have not been updated in 2 weeks

    Hi All,
    Right now I'm using Windows 8 Operating system laptop here I'm using Cisco Any connect VPN client tool,While connecting to the VPN below is the error where I'm getting :
    "Login denied valid AV software not found or AV signatures have not been updated in 2 weeks".
    More over I have already disable the fire wall also still the issue is persist.
    Please any one can assets me how can I proceed for this.
    Many Thanks,
    Sudhir

    Hi Sudhir,
    Right now you are in the ServiceGrid Support Community and this is unfortunately something we can not answer for you.
    Please raise your question in our vpn community:
    https://supportforums.cisco.com/community/6001/vpn
    They will be happy to support you with your problem.
    Thanks
    Patrick

  • Out-of-date package not been updated in almost a year

    The question I have is: what should I do when I see a package that has not been updated in almost a year (after its flag-out-of-date)? I can't seem to find any info on how such a situation is handled. I can't reflag and sending an email to the maintainer seems intrusive and/or rude. There may be an underlying reason to not upgrade, or the flag was lost in time and forgotten.
    The package I have in mind is opencl-headers. It got stuck on v1.1, and never updated to v1.2, and now still not to v2.0. There is an AUR package for the 1.2 headers, but that just seems silly to have around.
    Thanks for any input!

    I see, there is a backstory to all this. It seems though momentum was lost when ocl-icd devs did not respond to the email requesting info. The last commit to their repo was for 2.0 support, back in 2013. It seems abandoned since then, maybe a new spark of activity will come when a new OpenCL spec comes out.
    The current situation is quite terrible really: libcl in the repos is from the NVIDIA package, so this means a hard dependency on a vendor not willing to follow the latest version of the spec. Way back when it was probably a sane choice, but now, as the email linnked by Allan shows, the situation is different.
    Either choice, be it ocl-icd or Khronos, will improve the situation (OpenCL version and license-wise). Currently ocl-icd has one advantage (detailed in the POCL developer docs): choosing the icd at runtime.
    As any CUDA or AMDAPP or Intel OpenCL package will include their libOpenCL, and it can be selected by LD_LIBRARY_PATH if required, I hope a sane libOpenCL package will soon make it into the repo.
    As for backward compatibility: I believe the headers are backwards compatible, and it is up to the applications to verify the device they want to use supports the functionality they use. As for forward compatibility: if one solution fails and an alternative is better: just replace the package providing the ICD library by a better one.
    Note that both the OpenCL headers and the ICD (libOpenCL) are designed to be platform-agnostic and should in principle work with all versions of the spec and devices, limited only by the device capabilities as reported through OpenCL functions. Currently, libcl and the old opencl-headers version is the limiting factor, which is Terrible®, given the (open source) alternatives.

  • After completion of GR(MIGO) delivey document flow was not updated.

    We have to move the stock from PlantA to PlantB . Purchase order and deliveries and PGI has been created and stock is picked out of PlantA . For that delivey goods reciept also completed, when i checked in Purchase order history system showing GR has been completed. but in delivey document flow system showing upto GI document. GR document was not updated.
      When i checked in MB5T stock is showing under *Display purchase orders with delivery completed too*
    Thanks in advance****
    Edited by: RAVI Y on Feb 18, 2009 7:10 AM
    Edited by: RAVI Y on Feb 18, 2009 7:28 AM

    Dear Ravi,
    How can we check  GR (MIGO) is completed with reference to outbound delivey or PO?
    Regards
    Ravi
    Edited by: RAVI Y on Feb 18, 2009 9:55 AM
    Edited by: RAVI Y on Feb 18, 2009 9:56 AM

Maybe you are looking for