SD - Document Folw - Missing HU on double click

Hello ,
In the document flow when i double click on the handling unit, at the bottom of the screen i am not getting the details of the handling unit.
Pelase Let  me know if you any solution for this.
Thank you,
Patil

Hello Santhosh,
There could be various reasons for this both technical and functional.
First of all, the Handling Unit, if existing, has to be linked properly to the Delivery.
If the Handling Unit is not existing, then you need to check the Packed Material & Picked Material and check which type of process is followed whether it is a Packing or Shipping.
Also, need to attach the Packed Material to the Handling Unit created. And there are several other conditions inside.
Please let me know whether or not you can see the internal handling unit number.
Regards,
-Syed.

Similar Messages

  • Word 2010 (64-bit on Win7 64-bit) crashes crashes on opening any document by double-click.

    Sad to have to open repeat thread, but I'm having the same problem that Maurice Reed was having (that thread is now locked, although I didn't see any solution there).
    I have a fresh installation of Windows 7 (64) and Office 2010 (64). Any time I double-click on a document to open it (that is, any time I open a document from Windows Explorer), Word 2010 crashes.
    This includes situations where Word 2010 is already running and I open a doc or docx from Windows.
    This also happens with NEWLY CREATED documents. I tested this by opening Word and creating and saving a brand new document. Opening that doc (docx) from Windows triggers this crash.
    I tried deleting the Normal.dot as was suggested in other threads.
    Also tried installing updates and hotfix from Microsoft. No luck.
    I'm curious as to why Maurice's thread was locked when there didn't appear to be any resolution to it.
    I'm stunned that such a widespread problem would go without a patch, hotfix or resolution for so many months. Am I missing something? I've been researching this for about a month off and on now. Have yet to see an actual fix. On the other hand, I've heard
    about this problem from others even before it happened to me.
    What's going on up there? Where are Bartley & Jeanne when we need them. ;D
        - Dave F.

    Hi Dave,
    Maurice's thread was locked because he is using Office 2010 Beta, and his post is in the forum for Office Beta, since the Beta is past due, the whole forum is locked.
    Let's go back to your question.
    Have you installed the Office 2010 Service Pack 1? The service pack fixes many issues, you should try if you haven't.
    Download
    the Microsoft Office 2010 Service Pack 1 64-bit package now.
    I may to metion is that all I know the Office 2010 64-bit will work smoothly with Windows 7 64-bit, cause I'm using it for my daily work.
    So, the problem you met with mostly caused by the 3rd-party add-ins/services.
    Have you tried to open the document by holding the Ctrl key? This will open the document in safe mode, if you are able to do so, this will help us to narrow down the root cause.
    If it will crash even when you start it in safe mode, let's try to run a clean boot to check this issue. In a clean boot, lots of service will be disabled, if we wouldn't get problem in a clean boot, then we can enable the service little by little, then
    we can find out which service might cause this issue.
    For a detail instruction, you can refer to this kb:
    http://support.microsoft.com/kb/929135
    Let me know the result, any questions, feel free to let me know.
    Sincerely,
    Max Meng
    Forum Support
    Come back and mark the replies as
    answers if they help and unmark them if they provide no help.

  • Suddenly double-clicking on a PDF document opens the Acrobat application but the document does not load.

         Up until today I had no problem opening a PDF document that I have already saved by double-clicking on it.  Now when I do that, my Acrobat application opens, but the PDF document does not.  I need to use File/ Open to select the document I want to see, or I need to right mouse click on the PDF document and choose “Open with”.  I had this once before and I had help to resolve this, but I am using Acrobat 7 Professional and since it is not supported, I can’t get help when I call Support.

    Sounds like a Windows problem. Try the right click and then select the ALWAYS open with feature. That is supposed to fix the link. If that does not work, open the file type menu under the TOOLS>Folder Options (XP view, may be other in VISTA). If you select advanced under PDF, you should get a link under the open>edit something like "c:\adobeapp\acrobat 5.0\Acrobat\Acrobat.exe" "%1". The comment you make sounds like the %1 or the quotes are missing. Bill

  • FS10N Not display document with double click

    Hi, friends:
    Not display document with double click
    I am in the list of open items in transaction FS10N and when a wont to see a document by doing a double click in the line, instead of showing the document it shows the data of the line.
    Does anybody know the reason behind it? How can I resolve it?
    Thanks in advance.

    Hello,
    There could be two reasons:
    1. The account would not have been maintained with line item display.
    2. In case if the account has been created with line item display, then still you are not able to get the drill down (meaning that you are able to get the line items in FBL3N), in that case, immediately once you get the error, go to transaction code SU53. It will tell you the authorizations you are missing. You can forward that screen shot to your authorization team and they will give your proper authorization for drill down.
    Thanks,
    Ravi

  • In finder, or say anything else such as downloaded files, I have to push open with in order to open the file. If I simply double-click on a document from finder, it does not open.

    Hey guys. I have this problem where when I try to open say a document from finder, I have to push "open with."
    Simply double-clicking does not work. I would greatly appreciate it if anybody could help.
    Another unrelated problem is that when I push to open itunes, it says that it is on a locked disk.
    Thanks

    Select a particular download file. Press COMMAND-I to open the Get Info window.  In the Open With section choose the desired default application from the dropdown menu then click on the Change All button.
    For .dmg files use DiskImageMounter (System/Library/CoreServices/ folder.)
    For .zip files use Archiver - same folder as above - or download TheArchiver - MacUpdate or CNET Downloads.

  • Double Clicking on a PDF document, will not open

    When double clicking on a PDF document with the default document properties set to Acrobat Professional 8, the document will not launch Acrobat.
    If Acrobat is already opened however it will launch.
    I've tried:
    re-setting file associations
    deleting preferences
    Uninstalling and reloading Acrobat: (solves the issue for a time but after a period of use it reverts to this broken state).
    OS X 10.5.5 is fully updated, as is Acrobat 8.

    Another Utility that will do the same without aid of DVD.
    is a Utility called
    AppleJack version 1.5 works with OSX.5.x and version 1.4.3 work with all previous systems.
    download install the go into Single User mode (restart Command-S) wait for screen to come up will be in B&W as soon as it starts up release until you see a Blinking Block Cursor. type applejack as instructed on screen. follow the commands as shown in Order.
    I amazing what problems it can clear up. Font Caches are removed and others. If you follow all the way to the end. Its amazing how much your machine will speed up up not having to wade through obsolete Cruft. Note if you do everything to the end. will take you computer a few minutes to rebuild caches, and other items.

  • I have messed up the settings on my Mighty Mouse and don't know where they should be.  I cannot open a document by double-clicking anymore.  I don't know what setting adjusts that.

    I need help with my Mighty Mouse settings.  Don't understand the settings.  I can no longer open a document by double-clicking.  I think I changed my setting someway when I was trying to correct or find my up and down scrolling.   Please help. 

    I think you need to un-pair your mouse.   Leave it a few minutes than re-pair it as if you were starting from scratch and using the following details.   Item 1 will probably meet your needs.
    Troubleshooting wireless mouse and keyboard issues

  • Weird error -43, when double-clicking a numbers document in finder

    Steps to repro:
    0) open a finder window at the location (e.g. ~/Desktop) you are going to save your numbers document.
    1) create a new numbers document.
    2) save the document to the directory (e.g. ~/Desktop) that you have already displaying open in the finder (<- very important)
    3) switch to the finder and double click the numbers document.
    4) I get a error -43 at that point.
    5) To get around the error you have to change the directory to one up and then back to where the numbers document is or switch the view mode (cmd-1, cmd-2, cmd-3) .
    Looks like the finder has problems with recently saved numbers documents.
    Even weirder:
    Press cmd-I on the numbers document in the finder after you just saved it. The numbers document disappears and so doeas the Information dialog. What the heck?
    Can anyone else repro this?

    Thanks for trying.
    I tried as well, now saving to the desktop, which is on a seperate volume.
    I had the problem saving to the work volume.
    It seems to have to do with permissions.
    I checked "Ignore ownership on this volume" and applied it to all subdirs.
    Seems to have solved the issue.

  • When I double click on a certain box in one InDesign document another InDesign document opens

    Hi,
    When I double click on a certain box in one InDesign CS6 document another InDesign CS6 document opens. Although this is isn't the end of the world it is somewhat annoying.
    Any ideas?
    Kind regards
    Mark

    More info. Is this a link? Blank frame? Text Frame?
    What's the OS? Is ID patched to 8.0.1?
    Have you tried Remove minor corruption by exporting?

  • I've lost the "Send" button in my reply window. When I double click on a Mail message, on order to reply, the "Send" button at the top of the window is missing. I can reply by closing and saving my reply, and re-openning from Drafts. How to fix?

    I've lost the "Send" button in my reply window. When I double click on a Mail message, on order to reply, the "Send" button at the top of the window is missing. I can reply by closing and saving my reply, and re-openning from Drafts. How to fix?

    Hi, try this...
    If nothing is showing in the Toolbar at top, click the little gray oval at top right.
    Right click or Control+click on the Toolbar, choose Customize Toolbar, drag the Send button to the Toolbar.

  • How do I embed a pdf document into an existing pdf so that the user double clicks on the pdf object within the pdf and it opens? i've looked everywhere on various forums and tried attachments - but still not working. Thanks

    I've tried various methods but to no avail. I have a pdf document and within the pdf I'd like to embed a couple pdf documents so that all the user has to do is double click on the pdf object inside the pdf and it opens in a new window. I've tried using attachments to do it and linking it...but to no avail. Anyone know how to do? I'm using Acrobat Pro Version 11. Thanks

    The "embed" feature common to MS Office applications is not applicable to PDF (for the why and wherefore of PDF get comfortable and read the ISO Standard for PDF - ISO 32000-1:2008).
    You can insert other PDF files' pages into any given PDF.
    You can attach files of supported formats to a PDF (of course a PDF is supported).
    You cannot "embed". So, nothing is broken.
    Be well...

  • In the finder window, column view, I double click on icon, eg. a spread sheet,  and document will not open since I updated to OSXv10.8.2. Help anyone?

    In the finder window, column view, I double click on icon, eg. a spread sheet,  and document will not open since I updated to OSXv10.8.2. Help anyone?

    Hi Ron,
    Highlight one in the Finder & do as Get Info on it, what does open With say to use?
    What did you update 10.8.2 from exactly? 10.6.8 maybe?

  • Could I link CKMLCP document to accounting document in CKM3 by double click

    Hello,
    We had activated Material Ledger in SAP R/3 4.6c. After I posted Material ledger settlement document in t-code: CKMLCP. I could see a ML document in CKM3 of production consumption activity. I had issued this material to production order in the closing period. So, I got a ML document to transfer 1 level price difference to next level material. When I double click on this ML document, I want to link to accounting document. How could I make it?
    For some ML doc. (Goods issue doc.), when I double click on the ML doc., I can see Accounting document and Source document icon on the screen. I want the same function of CKMLCP doc..
    Thanks in advance!

    If the document flow updation is maintained then you can link documents however its not you wont..
    check the custiomizations for this
    regards

  • Double clicking on workflow items does not take release document

    Hi,
    I have configured work flow for PR and PO release ,but in Business work place in SO01 T-Code if I double click on the PR or PO number it is not taking to release document what may be the reason?
    parameter ID WLC is assigned for the user.
    Requesting expert advice.
    Regards
    Kantha

    Can you please check whether the default method gets executed when you try to execute from swo1.
    The default method will be Display.
    Also check for authorization. Please do a SU53 dump when you do not get the screen.
    Thanks
    arghadip

  • Whenever I double click on any htm or html document it will not open with firefox it gives a message window saying "Windows can not file path please type correctly" (not extact these words)

    I installed new version 4. Whenever I double click on any htm or html document it will not open with firefox it gives a message window saying "Windows can not file path please type correctly" (not extact these words) .. It was working when old firefox was there..

    Phillipp,
    I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
    Littleberry

Maybe you are looking for

  • Issue in clearing of previous data of screen cl_gui_docking_container= free

    Hi All, My program displays an idoc list(screen 100). Then if user selects any row in the method gets the index no and details of that idoc are displayed in another screen(screen 200) . Then control returns to this screen again. Now if user selects a

  • Open a website from an app (or applet)

    I have some JLabels in a Frame. I would like to be able to "click" on one of the JLabels (which contains a http-address) and thereby open a browser and the website. Is that, or something similar, possible?

  • Creating a short date

    This is what I'm doing currently Date today = new Date(); String sDate = today.toGMTString(); System.out.println(sDate);How can I write a short date? Like 31/11/01? Can someone show me off the top of their head? I've looked at some examples on this w

  • Error at starting j2ee server (newbie)

    Dear all, I am not able to start j2ee server successfully. I keep getting the following error when I try to start the server by typing j2ee: C:\Documents and Settings\ali>j2ee J2EE server listen port: 1050 Redirecting the output and error streams to

  • Creating a delivery doc with serial numbers

    Hi all, I need to create a delivery doc with the corresponding serial numbers? Any BAPI/function module for this?