SD Document Output Preview Issue

Hi Respected SD Seniors
Please help on this output issue.
I am trying to print my sales documents through STD output types.
Want to issue the sales document output to the screen (Preview) or Local network printer.
Please share with me the functional & technical config steps.
For example I am using AN00 (STD Quotation Output) for printing the customized quotation document. Every thing is set and I am able to
Trigger the output successfully. But I cant see it on my screen and not able to print in my local printer.
After quotation saved, I can see the AN00 is in YELLOW. And 2 Output device are exists (LOCAL, LP01)
Please advice me the printing setup. Where should I do change to configure my print preview or connect my local network printer as a default SAP R/3. printer
Please help
Regards
Priyan

Hi Kishore
Thanks For your Quick Response.
According to the STD setup of AN00
Medium: 1
Dispatch Time: 1 (By Periodic Job)
Partner Function: SP
Storage Mode: Print Only
Condition record has been maintained and the output was triggered correctly upon saving the quotation document. (Process Status: Yellow)
Then i selected the output and changed Dispatch time to 4 (Immediate). The process status becomes RED once the document is saved.
Processing log is as follows
Line1: Object 0000560015
Line2: Output type: Quotation
Line3: Processing log for program /SMB40/RVADOR01 routine ENTRY
Line4: Processing routine ENTRY in program /SMB40/RVADOR01 does not exist
What is it meaning of Line4: Program is RVADOR01 exists in SE38
And Form /SMB40/SDQUO_A is existing in the SMARTFORMS transaction.
And to link the local print to SAP (As an output device), should i need to contact basis or any specific place that i need to setup.
Please Clarify
Regards
Priyan

Similar Messages

Purchasing Document Output - Transaction issue Purchas Order

Hello colleges
we want to use Transaction issue Purchas Order for output PO ,
we find that we cant preview PO from this Transaction before printing and all so we can not have the possibility to print some POu2019S when we print use the output manually.
Can some one help ??
Is there possibility to mark several POu2019S and print them whit one push button ??
Can we have the possibility to preview PO data before print it? We need your advise u2026
Best regards
Gil Shinar

Hello ,
1.For the first question of printing multiple PO's at the same time you can use the report RSPPFPROCESS using SE38 transaction. You have the possibility of defining the PO number range that you want to output in one Go.
2. There is no possibility to preview and print in 'Issue Purchase Order' transaction. You can achieve the same only in 'Process Purchase Order' (BBP_POC) transaction .
Best Regards,
Sapna

How to enable "Billing Document- Issue Output To- Issue output to" in VF03

Plz let me know how to Enable "Billing Document --> Issue Output To --> Issue output to" in the VF03 transaction (2nd screen).
After entering the billing doc no. n then pressing enter items will be displayed. Then in the menu bar under "Billing Document" there will be "Issue Output To" option will be there.
Under that again " Issue Output To " & " Screen" options will be there, which by default displayed in disable mode. Is there any option to enable them.

Hi
U need to customize a message type for the billing by trx NACE

Output Type - Print Preview issue

Dear Friends,
I have an Output Type which when seen in the output preview / printing of billing doc shows the PO No. along with the other data.
The Output Type picks up the Sales Order no. from the table VBFA based on the billing doc no. and collects the preceding doc no. This preceding doc i.e. the Sales Order doc no. is then passed in the VBKD table along with the line item no. of the billing doc. and then the PO No. maintained at the item level is picked up from the field BSTKD by matching it with the line item no. of the Sales Order Doc No.
Now, I am facing a problem where when the PO No at the header level and the PO No of all the Item levels are same at the Sales Order doc, the output preview does not display the PO No. in the Output preview / print. This happens with only those sales order doc where the header level PO No. and Item level PO No. are the same. For rest other docs, things are running smooth.
Kindly suggest me with some solution.
Regards
Vineet Jain

When business data is the same on header and items, VBKD does not contain any lines for the items - it only contains a single line for the header where the item number is initial. This fails your logic of looking up VBKD by line numbers.
Edited by: Keerthi Hiremath on May 29, 2008 9:00 AM

4650dn printer changing document output from print preview

recently installed 4650dn printer set up was a breeze, then suddenly the printer started changing the document output like there was an internal setting overriding the software settings. almost as if it was confused about the orientation of the paper. i am running vista with the print driver PCL 5. i have tried restoring factory settings, tried different software, finally got it to work in MS word but prefer to use MS publisher, adobe illustrator etc.

Hi Narasimhan,
Yes, your guess is correct. We have tried out the possibility of controlling the print from the user status configuration side of things, but as the user status is at an Operation level, the system status at the header level still gets set, confusing the user that a print was created.
Any other ideas / alternates ?
Cheers,
Ashok.

PO output preview error

Hi SRM-Experts,
System: SRM 550
Scenario: ECS
We receive the following popup-message while using the PO output preview functionality in SRM (TX BBP_POC): "Global data missing for purchase order".
I found out that the error occurs during determination of company address of the purchase group. The error is raising in FM "BBP_OUTPUT_COMPANY_FROM_EKGR". The FM is looking for the user attribute (PPOMA) "COMPANY", but for the Purchase Group is no company flag maintained (TAB: Function in PPOMA).
Has anybody an idea how I can fix this issue?
Thank you very much in advance
Best regards
Axel

Hi
Try these SAP OSS Notes ->
Note 560591 EBP 3.0-3.5: Company is not determined with PO output
Note 525692 3.0: Output of contracts
Note 846738 Methods: Sporadic termination with various documents
Note 908184 Incorrect numbering with filter
Note 861815 Prices in historical versions are missing
Note 785616 Displaying history at item level of a purchase order
Note 761516 Release note SRM Server 5.0 SP03
Note 703876 Release note SRM Server 5.0 SP00
Note 792177 Purchase order changes not in back end purchase order
Note 655737 Support Package 03 for SRM 3.0
Note 484325 Missing plant and storage location in ext. classic scenario
Note 485552 Missing tax code in purchase order with direct material
Do let me know.
Regards
- Atul

PPF: Output Preview

Hi Guys!
We're using ECS. When Local POs are printed SRM finds the correct smartform.
We configured country specific "Action Definitions" and use "Condition-Depending Document Output" with transportable conditions.
But in Tcode BBP_POC (Proces Purchase Order) the Output Preview always displays SAP Standard Form BBP_PO instead of country specific Smartform.
Do we have to use BAdi BBP_CHANGE_SF_VERS to adjust this system behavior?
Rgds.
Dieter

Hello,
I am also facing the same issue.
We followed the below process
1) Created new action definitions in 'Define Actions for Purchase Order Output'.
2) Define the processing types (for email / Print / Fax). Provide the smartform name
3) Schedule actions for action definitions in 'Condition-Dependent Purchase Order Output'.
4) In the Schedule condition, check the Requestor Address - Country key to match the different country keys corresponding to PO smartforms.
Kindly suggest if you have followed the same steps. Please suggest if you have a better solution.
Cheers,
Anish Cherian

PDF Output Preview Inconsistent

I have created a document in Framemaker and printed it out to a PDF. When I check the PDF Output Preview to see if there is any color by turning off Process Black, I find an image that shows up as gray. If I then scroll to the bottom of my PDF and then come back to this image, it no longer shows up. I've had another person in the office check the file and the same thing happens. The image in question was created in Illustrator before being imported into Framemaker. All the colors were set to black.
Is this a bug in how the PDF is displaying the Output Preview? Or is there an issue with the image?

I ordered a book a couple of weeks ago with the advice of AppleCare people responsible for printed product, that the PDF which is seen in the purchase process is what the final output would look like.
However, and to my disappointment, it was not the case. Indeed, the PDF was cropped on the edges. The AppleCare people ordered a reprint to see if any change would appear, but unfortunately it was not the case.
Now the matter is within AppleCare quality control's jurisdiction and I do not know yet what will be their conclusion. I'll keep you posted if you are interested.

Invoice printing output preview is not displaying anymore.

Hello
The user have invoices where you cannot click the issue output preview. Before the 9th of january everything was fine, he said all he did was transport 2 things.
1. made the field of payment term mandatory instead of it being optional.
2. Added new payment terms, about 5 or 6 new ones.
He says on the 10th of january he started seeing this problem. Also, the accounting document is not being created for those invoices after the 9th of january. Before 9th , there were no problems.
Any ideas or solutions.
Thanks in advance

Hi
Use Tcode VFX3 and try to release the documents and advise the error as to why the the accounting documents are not being generated
Anurag

Apply Layer Overrides Option and Output Preview

Recently I found a problem when using apply layer overrides and output preview options.
If I open a layered document and apply layer overrides. Then go to output preview under print production menu, all the content in my hidden layer shows up. I know that the "apply layer overrides" command resets the settings for all layers including hidden ones. Just wondering if it's possible to not show layer content when doing output preview? or is it possible to disable the "apply layer overrides" option?
Thanks

See if clicking Reset All Warning Dialogs at the bottom of Photoshop>Preferences>General resolves the issue.

Acrobat 9 + Output Preview

In Acrobat 9 I noticed something confusing. I had a pdf file which had black text on a background. I opened this up in Acrobat 9 and went to check to see if the black text was set to overprint. Going to Output Preview I turned off the Process Black separation and it showed me that the black appeared to be overprinting. I then turned off the Simulate Overprint check box and the background showed the text to be knocking out. Under the Color Warnings preview I used it to show me all the overprinting elements and it verified that the Black Text was overprinting. I assumed that Simulate Overprinting would show me what the picture would look like if the black text was not set to overprint. Instead it's deceiving me making me think that the black text is knocking out when I turn this off.
In Acrobat 8 the previews appeared correctly or what I assumed in my mind as correct. Is this feature working correctly in Acrobat 9 and if it is can you explain the thought process behind what is happening?

In Acrobat 9, you might have noticed that overprint preview has been removed from the menu items under Advanced > Print Production. The "Simulate Overprinting" checkbox was added to output preview so that we can still temporarily "turn on/off" the simulation of overprinting appearance (rather than have to change preferences), largely for troubleshooting or further examination of a document. Turning this off is like turning off overprint preview (which simulates overprinting appearance). It's not actually turning off the overprint flag itself, so color warning is still highlighting the black text.
Output Preview always enables overprint preview regardless of what your preferences are (in earlier versions, this includes your menu selection). You were unable to turn off overprint preview whenever output preview was open. In 9, the checkbox allows you to turn off that simulation.
Overprint Preview can still be controlled in display preferences.
I hope this helped. If not, please give more info about what you are expecting to see.

Problem with creating PDF in Photoshop, or Acrobat Output Preview

I saved a PDF in Photoshop and Acrobat's output preview the text was black in 4 colors and Rip did not have this problem. Why?

You have gone a while without a reply here, so I'll bump your post at least, but it is not clear from your question exactly what your problem is.
'Black in four colors' I don't understand this statement. Black is black and does not have colours.
'Rip' I don't know what you mean by Rip.
One tghing that comes to mind is that if you have exported a large layered document to PDF and that document had vectored objects like Type layers, whenn you view the PDF file you might initially see those vectored objects in black while the system is catching up and rendering the type layers etc. In that case, just waiting will see it corrected, but a 3550 x 8800 pixel banner file I delivered to a printer recently, took ages to render on the printer's slow system.
If you expand on your problem, I amn sure someone will try and help.

Acrobat X Pro ouput preview issue

I have recently upgraded Acrobat from version 9 to 10. I frequently use the separations preview in the Output Preview tool to check the black separations on PDF files I receive for printing. When I try to click the black separation on and off again, I have to hold down on the mouse button for about half a second otherwise the separation checkbox doesn't toggle. It's not the end of the world but a pain when I have to check many multiple page PDF files. It didn't have this problem with the previous version 9. Has anyone else noticed this? I was wondering if it's an Acrobat bug or just an issue with my installation.

Thanks for checking that Steve. After poking around I tried changing the Double-Click speed in the Mouse preferences to as fast as it will go and it seems to make a big difference when toggling a separation on and off and back on again. So I'm happy.

Acrobat Pro 11 - Output Preview not working

This issue came up again on my Macpro. Although it's ok on my MBP. When try to analyze a PDF in "Output Preview" a few things aren't working for me. The "Total Area Coverage" warning will not display on screen. Also when I hover the cursur over the PDF I am no longer see percentages under the ink color Preview > Separations. Does anyone know of a quick fix so I don't have to keep going back to an oldere version of Acrobat?
Thanks for your help.

I think I'd uninstall Acrobat (there should be an Uninstaller in your Acrobat folder inside the Applications folder). Then reinstall the application.

Acrobat X Pro Output Preview

I just upgraded to Acrobat X Pro and I'm running it on Max OS X 10.5.8. When I click on the check boxes of the color separations in the "output preview" it doesn't do anything. Instead I have to hold down the mouse button for a extened period of time, let go and then it will work. I do prepress work and I use the color separations in "output preview" to make sure blacks are truly going to be black. I go through a number of pages in a day and having to hold down the mouse button, instead of just clicking the checkbox can be time consuming. I have never had this issue with Acrobat 9 or any previous versions. Any suggestions would be appreciated. Thanks
I found a thread similar to my issue, but the suggestion was to increase the double click speed in the preferences, this did not help.

I also have to make sure gray images are real gray not cmyk gray. Is there a preflight for that?
Date: Thu, 15 Dec 2011 02:07:09 -0700
From: [email protected]
To: [email protected]
Subject: Acrobat X Pro Output Preview
    Re: Acrobat X Pro Output Preview
    created by JR_Boulay in Acrobat Macintosh - View the full discussion
In the PReflight tool there is a checkup that can automaticaly control black texts, this is less time consuming than doing it manually…;-)
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4086238#4086238
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4086238#4086238. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Acrobat Macintosh by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

SD Document Output Preview Issue

Similar Messages

Maybe you are looking for