SD Document Soft Copy

Dear All,
If anyone has the soft copy of the SD documents/guide, please send the same to me.
Best Regards
Renjan

HI,
refer this link
http://www.sap-basis-abap.com/sapsd.htm
Re: SD document
Regards
Sudheer

Similar Messages

Security --- Hard Copy V/s Soft Copy

if a hand-written document / paper is sent to somebody through email, in pdf format, is it possible that the receiver can just read it & can't copy or print it ??? ... Implicitly, i want to know about foolproof security of a soft copy.

But basically with Acrobat you can (in the document Properties | Security) disallow printing, copying, etc.

Purchase Order Soft copy

Dear all,
I am working as a technical consultant in a reputed company.Now my client requirement is whenever we approve PO there will be check box Email.If we click on email button then PO soft copy will be sent to the client.But instead of the default copy they want to send a purchase order report (.rdf) through mail.Can anyone suggest me how it is possible.
Thanks in advance.
Regards
siri

We had achieved it using a custom mailing program running on schedule which had folowing logic
1) Find out the request id of the Purchase order Report concurrenet program
2) Insert the request id in a marking table so that same po will not be mailed againa and again
3) pick up output of purchase order reports stored in $APPLCSF/out with the help of request id
4) use generic mailing program , which we had written in unix (you can write in pl sql) also to take this file as an attachment and mail it

Ale, Edi, & Idoc Technologies by Arvind Nagpal Soft Copy

Does any one have Ale, Edi, & Idoc Technologies by Arvind Nagpal Soft Copy.
Please send an attachment to [email protected]
Or do send me the link

Hi,
Based on the business requirements, you may need to do the following actions:
1) Extending standard Idocs.
2) Complete custom idoc scenario
3) Enhancing standard Idoc population programs using exits.
4) Creating custom segments
5) Creating partner profiles
etc

MY HP Office Jet Pro 8500 will not feed a document to copy or fax - how to fix it?

My HP Office Jet Pro will not feed a document to copy or fax - how do I fix this?

I have linked a document below that may be able to help you get your automatic document feeder working again.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01609880
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

Broken Link between Base and Target document in 'Copy To' option

Hi Folks,
One of our client has been facing a peculiar issue. When the 'Copy To' function is used to Copy document from Sales Order to Delivery and recently one instance of 'Copy To' from Delivery to A/R Invoice ,the base document got copied to the target document in each case but there was no trace of any Base Ref. left in the Target document( either in row level or Remarks), thereby the link between the Base and Target document got broken.The Base document remains with status as open.The same base document when tried again to 'Copy To', it creates the link between Base and new Target document.
This instance had occurred recently 3- 4 times in a span of 3 months or so. In normal circumstance this never happens. The client is pretty sure they have used 'Copy To' option to copy the document from Base to Target.
Any hints or possible reasons if one can highlight would be appreciable.
The current version used is SAP B1 8.82 PL11 and it was upgraded more than a year back.
Regards,
Bharath

Hi,
All the data in Sales Order and Delivery are matching one to one in terms of row details,
and Document header level.
The missing data was Base Ref. data and Del.Date didn't get copied from base to target as shown in screen shot.
Also i have checked it earlier regarding change of target document row details like changing item, but this will only remove the link of that particular row and remaining row link remains intact, but in this case there are many items and it doesn't seem user will have changed in all the rows.
Regards,
Bharath

HELP! I saved a document. Copied the document. Went to delete some extra characters. Accidentally deleted the entire document. Now I can't find my document. When I open the saved document, the page is blank. Does Pages save copied text anywhere?

I saved a document. Copied the document. Went to delete some extra characters and accidentally deleted the text of the entire document. I did not save a blank page. I cannot recover the lost text. Please Help. I'm NEW to Pages.

Hi Jan,
Copied text (or other copied material) is on the Clipboard, but only until you copy something else or log out of your account. If you act before doing another copy, you can paste the copied material back into the document. If you don't act right away, you may still have a path back.
One of the most useful keystroke combinations on the Mac is the "Oops! key," as a friend of mine once named it. That's command-Z, also known as "Undo". In some applications it will let you undo only a single step, but in others, including Pages, you can do repeated undos, so it's not quite so essential that you act immediately on making an error. Undo, done via the Oops! key, or via the Edit menu takes you back one change at a time. You can't skip any steps, so to get back to the state before the accidental deletion, you'll have to undo any work you've done since then. The memory of what to Undo disappears when you close the document or quit the application.
At that point you're at the mercy of your backup plan. If you've had Time Machine running, you'll be able to enter Time Machine and go back to an earlier, saved version of the file.
All these are in addition to the steps Ian suggested above.
Regards,
Barry
PS: Best piece of advice I can give a new Pages user (beyond Backup early and often) is to download and read through the first few chapters of the Pages '09 User Guide, available through the Help menu in Pages '09. Mostly pretty easy reading, and will get you through the basics without much trouble.
B

Need a soft copy of any book or a good reading material?

Hello All,
Anybody have any book soft copy or any good material. I am currently working as a ABAP Developer. I am interested to learn XI. I do have XI IDES system. But don't know how to learn. Can any body share him material with me. If any body want to send it to my mail id-- my mail id is [email protected]
Thanks in Advance,
Amit
Message was edited by: Amit Gupta

HI,
These are the std SAP XI certification books.
TBIT40:
https://websmp109.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT40
TBIT41:
https://websmp201.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT41&LANGUAGE=
TBIT42:
https://websmp206.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT42&LANGUAGE=
TBIT43:
http://www50.sap.com/useducation/curriculum/course.asp?cid=60161651
TBIT44:
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT44
I suggest rather than reading a softcopy you should try to follow the weblogs which explains you each and every steps.
Refer the below link for understanding the different adapters.this is very helpful.
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
Below are the different scenarios which will help you in understanding the adapters.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
JAVA Mapping
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
/people/stefan.grube/blog/2006/10/23/testing-and-debugging-java-mapping-in-developer-studio
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/thorsten.nordholmsbirk/blog/2006/08/10/using-jaxp-to-both-parse-and-emit-xml-in-xi-java-mapping-programs
IDOC:
Collection of Multiple type IDOCs in BPM By Pooja Pandey
Collecting IDocs without using BPM By Stefan grube's
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
XI:Idoc Message Packages By Sravya Talanki
Collecting from Multiple Interface and sending it to R3 By Prasad Babu Nemalikanti
Idoc to File:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Collection of IDoc to Single File
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters --> For Idoc sender: IDOC -file
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
HTTP to RFC - A Starter Kit
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
IDOC configuration
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
RFC:
Weblog to send Response from RFC to File in Asyn Mode Using Proxy [original link is broken]
File 2 file:
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16
Proxy:
Server Proxy -
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Client Proxy -
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Thanks and Regards,
Chirag Gohil

RMMAIN-create document-Assign document as copy

Dear friends,
I am working with Sol Man 4.0 SP 12. In RMMAIN transaction, i have uploaded some documents in "Project Preparation" phase. The same document i want to link to "Blueprint" Phase.
So i am selecting "Blueprint" phase node. In "Project documentation" tab, i want to create a document with the option of Assign document----->As copy.
If i execute this option, i am getting following error.
<b>"Folder Class IWB4FOLDER is not valid for objects of Info object class SOLARGEN"</b>
please guide me to solve this error.
Regards
Senthil

Hello,
Have you tried using the icon next to the create document. YOu can assign a document as a copy or a link through the icon with a plus sign. Let me know if this works. Thanks!
Grace

Copy and pasting a page in an existing document? Copy and paste functions are greyed out? Also tried extracting the page to copy but am alerted that an incorrect structure was found in the PDF file?

copy and pasting a page in an existing document? Copy and paste functions are greyed out? Also tried extracting the page to copy but am alerted that an incorrect structure was found in the PDF file?

What do you mean by "copy and paste a page"? What tool have you selected? Or are you just assuming you can select stuff and copy/paste as in Word?

Lines are coming while scanning the documents or copying the document

Horizontal lines are coming while scanning the documents or copying the document from fedder as well as glass

Hi there @Aziz_Husain,
Welcome to the HP Community!
I understand you are noticing horizontal lines when you make copies and scans, and I hope to help you.
Here are some steps I suggest that you try:
Reset the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Tip: Make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power.
Try all of the steps from this article: HP Officejet Pro 8500A (A910a and A910d) e-All-in-One Printers - Vertical Bands, Lines, or Streaks i...
Test a copy and test a scan now. If they still have lines through them, please contact us directly to inquire about your printer replacement options as you would need a new unit at this point.
I hope this information helps you, and if you wish to show appreciation for my efforts to help you, please click the "thumbs up" below!
Have a great day and weekend
HP's Contact Info:
Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do I send soft copy attachments of photos via email to windows user

Help , need to send soft copy attachments of photos via email to windows operator . thanks

Not sure what you mean by soft copy attachments. But to help ensure Windows users have no problem coping with attachments from Mail Control+Click on the attachment that displays as an inline image and select 'View as Icon'. Also, in Mail>Edit>Attachments make sure 'Always send Windows-friendly attachments' is ticked.

Soft copy of graphical Area of PPB

Hi friends,
I need some information regarding generation of softcopy of the graphical area of the Project Planning Board.
My client wants to generate soft copy of the graphical area of PPB, same as we do for any tables, like exporting of the table to excel sheet or HTML format.
Is it possible to at all generate a softcopy of the diagram area from CNS41 or CJ2b or from Cj20n ?
I have checked all the option but still unable to find it.
Pl. help at the earliest.
with Love,
Abhra

not sure what are you trying to do
is the diagram you want the hierarchy diagram from CJ20N in soft copy
if so
click on the hierarchy button
menu path Print
then go to output options
click on BMP and choose file
select print and give the out file path
you can do the same for soft copy of the gantt chart from CJ2B

Bought CS6 online, but unable to download. Can i get soft copy somewhere?

Is it possible to bring a thumb drive to a service centre and collect the soft copy?
Now i cant download anymore, because i exceeded the 10 times allowed...

CS6 product downloads
Direct Download Links for Adobe Software
Mylenium

Hi want soft copy of sap press book

hai sap gurus,
can any one send me soft copy of sap press book for sd
with regards
sashi

hi,
mail send
also follow this link
regards,
Arun prasad
Message was edited by:
arun prasad<a href="http://help.sap.com/saphelp_47x200/helpdata/en/92/df293581dc1f79e10000009b38f889/frameset.htm">SD</a>
Message was edited by:
arun prasad

SD Document Soft Copy

Similar Messages

Maybe you are looking for