"SD_EDI_QUOTES_ORD_ID01" is missing in ECC 6.0

Hi Guys,
I am working on Upgradation program 4.5B to ECC 6.0, The above Function module is missing in ECC 6.0,
Could you please suggest us, is there any SAP Notes is available for this Function module.
Please suggest us any other way also not to replace the Function module.
Thanks,
Gourisankar.

Had the same issue when trying to generate an 855 outbound.
In WE20, under the Message Control tab, change your process code to SD10.

Similar Messages

Personal Information nodes missing in ECC 6.0

Hi,
Personal Information nodes missing in ECC 6.0
SAP HR Highest Level Support SAPKE60003
EA HR SAPKGPHD03
What may be the reason.
Note: Points will be rewarded immediately.
Kiran

Hello,
thank you so much.
I think that there is not soultion. SAP told me:
Dear Maria ,
You have set the Maximum period, Minimum remaining shelf life and
Total shelf life as zero. I tested this on our internal test system
and when these are all set to zero the fields PROD & SLED are not
visisble in the Material tab in tcode MIGO.
The shelf life is only checked when you enter a goods receipt if the
following prerequisites are met :-
1.The minimum remaining shelf life is maintained in the material master
record or in the purchase order. The minimum remaining shelf life is theminimum number of days for which the material must keep for the goods
receipt to be accepted by the system.
2.The shelf life expiration date check is active for the plant and
movement type in Customizing for Inventory Management.In the
transaction SPRO,if you check in SAP Reference IMG
Material Management > Inventory management and Physical Inventory
> Goods Receipt > Set Expiration date Check,the SLExp/prDt field
is checked for plant and material movement
Regards

User Exit for third party order processes.Missing in ECC 6.

Hi All,
There is a user exit EXIT_SAPLJ3AM_003 which exist in 4.6C version of SAP for AFS.
This user exit is for Third Party order processes. This is called within the include LJ3AMFD1 of the main program SAPLJ3AM.
But this User exit is missing in ECC version of SAP for AFS.
Could anyone please let me know how I can resolve this issue as I need this User exit for my requirement. Has SAP provided any enhancement spots for this?
I tried to search the enhancement spots and OSS notes but couldnu2019t get any useful information.
Please advice.
Thanks,
Ameesha

changed our requirement

Active Hardware Key is missing in ECC 6.0

Hi All,
I have an issues with my ECC 6.0 system. Once I restart my application server due to hardware maintenance. Since that time, I can't logon to my ECC 6.0 except in client 001 with user SAP*. I found in transaction SLICENSE that my active hardware key is missing...
Could anyone help me with this problem ??
Rewards points will be give to you who could solve this problem.
Thank you..

Dear,
Do you have a license installed ? (check the slicense status)
You may request a new license in SAP Service Marketplace at http://service.sap.com/licensekey
Please note that as of Web Application Server ABAP 7.0 the license keys are digitally encrypted. Therefore you must request a new license key for your existing or new system if you are using a SAP product based on Web AS 7.0. Request your digital encrypted license key with license type standard and install it as described in SAP note 870871.
I hope this helps,
Lucio Rodrigues

SLED field is missing in ECC 6.0

Hello!!!
we're upgrading from 4.6C to ECC 6.0.
I have a problem with SLED field in MIGO transaction in ECC 6.0
For not batch-managed materials, the SLED check is activated.
1)In Custimizing, the plant and movement type are actived.
2) remining self life in Material master plant stock view -> 0 Days
3)The PO -> 0 Days
4) Info record -> 0 Days
WHen we enter the MIGO transaction, in Material tab, the SLED field is missing, so we can't enter de SLED. If I maintain in PO or material, more than 0 Days, the field is open, but It doesn't work with 0 Days...
In 4.6C version, the SLED filed is open, and It's OK.
I don't find the solution...any idea???
Thanks ins advance.
Best regards
María.

Hello,
thank you so much.
I think that there is not soultion. SAP told me:
Dear Maria ,
You have set the Maximum period, Minimum remaining shelf life and
Total shelf life as zero. I tested this on our internal test system
and when these are all set to zero the fields PROD & SLED are not
visisble in the Material tab in tcode MIGO.
The shelf life is only checked when you enter a goods receipt if the
following prerequisites are met :-
1.The minimum remaining shelf life is maintained in the material master
record or in the purchase order. The minimum remaining shelf life is theminimum number of days for which the material must keep for the goods
receipt to be accepted by the system.
2.The shelf life expiration date check is active for the plant and
movement type in Customizing for Inventory Management.In the
transaction SPRO,if you check in SAP Reference IMG
Material Management > Inventory management and Physical Inventory
> Goods Receipt > Set Expiration date Check,the SLExp/prDt field
is checked for plant and material movement
Regards

Proxy Classes missing in ECC Quality

Hello Experts,
I have Created a Inbound Proxy in ECC Dev through sproxy tcode it is working fine in development and whwn Iam trying to move it to Quality it is showing the Error Message as Class Nof Found or Defined. I have gone to Se80 and activated the Classes and methods but this has not been yielded any result, pls gide me in this issue.
Regards
Naresh

What i understand that when you are trying to move TR to quality you are facing this issue.
If i am correct then Check whether class is locked in TR or not.
Sometimes it happens that while creating proxy some of the objects were missed in TR so check in your TR whether it contains classes which were created while creating proxy.
In TR check:
Program Id Object Type Object name
Class (ABAP Objects) R3TR CLAS XXXClass NameXXXXX
BR,
Vijay

SWW_WI_EXECUTE_MULTI is missing in ECC 6.0

Hi Experts,
Earlier in 4.7 we were using SWW_WI_EXECUTE_MULTI FM for executing multiple workitems.
But in ECC6.0 SAP has removed it. If anybody is haing some alternate FM please reply.
Thanks in advance.
Regards,
Aabha

Hi Aabha,
This SWW_WI_EXECUTE_MULTI FM is removed in ECC 6.0. I have check if there is an alternative FM for this. But Unfortunately there is no alternatve FM.
I would also advise you to gothrough the notes below for notes which are not released for customer and internal released.
415983 Modification/customer developments of SAP function
109533 Use of SAP function modules
Many thanks,
Mohammed Hussain.

SAOP messages missing in ECC

Experts,
We have a production issue, there are multiple sender systems and ECC is recipient system. We have soap receiver channel for ECC. This interface was working fine for long time however starting last Friday not all the messages are reaching to ECC. They are all successful in PI (absolutely no errors in communication channel, RWB, component monitor is good, cache is ok)
We did cache refresh which did not help, we have 7.31 and we were using 7.11 adapter in Communication channel so SAP recommended to change it to 7.31 which solved the problem for few hours and again started.
We are on PI 7.31 SP6 Patch 33, SAP recommended it to go on Patch 55. We are not positive that this will resolve the issue because it was working earlier.
We have also checked ECC performance and there are no issues, used XPI inspector but did not find anything. The message volume in PI is also not changed.
Please advice.
Thanks,
Nishant

This issue is resolved, this was nothing to do with PI. The load balancer had an issue and messages were going to wrong app server.
Thanks,
Nishant

Data missing from ecc to psa

Hi All,
I have got a issue when iam loading data from ECC(SAP R/3). There are some 40 lakhs record in R/3 when i checked in extractor checker, But when its getting loaded into BW upto PSA the request is automatically showing the status green and data is not fully loaded its showing something around 20 lakhs odd.
Iam loading full repair full request and i dint face any problem when i have loaded earlier, the data was getting perfectly matched with the ECC system(RSA3).
I am bit confused why the system is behaving like this.
Please suggest.
Regards
Vikas.

Hi,
Please check any fileter in you infopack level Manually or using any ABAP code.
Thanks and Regards,
Venkat.

Order Change Mappping Missing for ECC SRM Integration

Hello XI Experts,
We are using ECC-XI-SRM SUS for PDP scenarion.
We have uploaded the contents and find that no message mapping program exists for Order Change -- that is ORDCHG.ORDERS02 idoc to SRM.
However there is a Interface mapping but it refers to the same mapping program as that for Order Create -- ORDERS.ORDERS02 to SRM.
Can You please let us know , if you faced this as well or not ... and what should be our course of action now.
Thanks,
Mani

Anand ,
can you let us know one more thing..
For ECC-XI-SRM integration all the conents are readymade...
What else do we need to consider... like Alert config etc?
Cheers,
Himadri

Cl_abap_structdescr= create is missing in ECC 4.7

Hi,
We have ECC 4.7 developement system in our landscape. Programmers are want to use the method cl_abap_structdescr=>create . But this method is not existing in this version.
Do we have any sap oss note to get this method in 4.7.
Thanks
Srikanth

Hello Srikanth,
CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE( ) uses the GENERATE SUBROUTINE POOL technique to create the dynamic internal tables.
And as per the SAP documentation,
In an internal mode, a maximum of 36 temporary subroutine pools may be created.
Source: [http://help.sap.com/abapdocu_702/en/abapgenerate_subroutine_pool.htm]
Btw why are you crating 36 dynamic internal table? That's way too far-fetched even for the RTTC classes
BR,
Suhas

Transactions missing in Role After Upgrade from 4.6c to ECC 6.0

Hello Friends,
I did multiple searches on this question but it was unsuccessful. We are upgrading from 4.6c to ECC 6.0. We are testing roles to make sure the migrate properly.
Irrespective of su25. There are transactions that are not obsolete and are missing in ECC 6.0
For example if I have a role called FIROLE. Which has 20 tcodes in 4.6c. When we upgrade to ECC 6.0 8 tcodes will be missing. This is not because the tcodes become obsolete.
What is the best way to approach this. Should we be testing each role?
Thanks!

Hello Imran,
transactions can be 'obsolete' also if they still exist.....
If the application developers create new functionality, new look,.... in new transactions but still let the 'old' ones in the system.
Just think about the ME2*-transactions..... The developer can decide, that such new transactions should replace the old ones after upgrade in the roles or let the old ones as they are.
You can get an overview about replaced/obsolete transactions by reviewing table PRGN_CORR2 (make sure, that you have the latest version, according to [SAP Note 991377|https://service.sap.com/sap/support/notes/991377] !!!). SU25 gets its information from that table.
b.rgds, Bernhard

Fields missing in VA02

Hi ,
I am working in upgradation project.When i execute transaction VA02,at item level all the batch fileds (in sale A tab) are missing(in ECC 6.0) as follows:
Field description                                                                 Field Name
Material for Default Original Batch                                     MILL_VBAP-MILL_PREF_UCMAT
Reference Orig. Batch                                                      MILL_VBAP-MILL_PREF_UCCHA
Plant for Default Original Batch                                         MILL_VBAP-MILL_PREF_UCWRK
Requirement: Include/Exclude Original Batch                     MILL_VBAP-MILL_PREF_UCSEL
But these fileds are visible in ECC 4.7.
Any input?
Thanks and Regards,
Amruta.

Hi,
Just get the help from BASIS people to install the related patches.
Regards
Thiru

Error encountered during up-gradation from 4.6C to ECC 6.0 - 2

Dear All,
We have done a technical upgrade from version 4.6C to ECC 6.0 and encountered following error -
In the report s_alr_87012327, there is a field "only with creation block" in version 4.6C. However, this field is missing in ECC 6.0. Why so?
Kindly suggest the alternative to carry out the same in ECC 6.0.
Thanks in advance.
Regards,
Gauri

Hi,
The creation block is hidden in ECC6 on the subscreen. Try all selection( SHIFT+F7).
Thanks
Vaibhav

Error encountered during up-gradation from 4.6C to ECC 6.0

Dear All,
We have done a technical upgrade from version 4.6C to ECC 6.0 and encountered following error -
In the t-code ABZE (acquisition with in house production) there is a check-box for reverse posting on screen with version 4.6C. However, this field is missing in ECC 6.0. Why so?
Kindly suggest the alternative to carry out the same in ECC 6.0.
Thanks in advance.
Regards,
Gauri
Edited by: Gauri Naik on Mar 28, 2010 12:48 PM

Hi,
The creation block is hidden in ECC6 on the subscreen. Try all selection( SHIFT+F7).
Thanks
Vaibhav

"SD_EDI_QUOTES_ORD_ID01" is missing in ECC 6.0

Similar Messages

Maybe you are looking for