SD File Transfer Corrupts

Hello! Everytime I try and put a significant amount of music on my SD the file system corrupts. Then if I do error recovery under disk tools I lose most of the music. I'm blaming the blackberry at the moment. I don't think it happens when i use a card reader, until I put the card in the blackberry. I've tried this on 2 pc's running windows 7.

What version of Final Cut 6 are you running?
-paul.

Similar Messages

I had to install a new hard drive because my old hard drives boot files became corrupted, and i want to get all of my music files off the old hard drive and regain all my play counts/ratings/playlists

Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.

Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus

How do you install CS5 onto a new computer without Time Machine/file transfer

I'm not getting a new computer, but my current one is getting a little old (Macbook Pro V. 10.6.8) and I'm afraid it might crash if I download the newest Maverick system, which is why I want to make absolutely sure I'm able to save and transfer all my old files and CS5 Creative Suite programs if this indeed happens. I don't trust Time Machine to do it; my boss had this happen and Time Machine did not transfer the Adobe programs. I also don't want to rely on Time Machine and any other file transfer (which all new Macs offer) because I've had brand new computers crash because of old corrupt files from my old computer converting over, and the Apple people said it's a bad idea (which would have been nice to know BEFORE the computer crashed and everything. . .) I've been told you can only use the CD to install CS5 onto your computer twice, which I've already done (thanks to my brand new computer crashing once already). So I would like to know how it's possible to install the program onto a new computer should this one crash, without the use of file transfer or Time Machine. I have no interest in upgrading to CC.
Thanks!

Avoid using Time Machine for re-installing Adobe software. It rarely works and usually breaks the activation mechanism.
I've been told you can only use the CD to install CS5 onto your computer twice,
Not quite.
You can install the software as many times as you like but you can only activate the software for use on a maximum of two computers at the same time.
To re-install you will need your CS5 serial number.
Download the installer from Download CS5 products
Install then enter your serial number when prompted.

Windows 7 64-bit Copying files to external usb drive - files becomes corrupted.

Hi All,
I am getting intermittent problem with regards to copying files to usb external hard drive from my laptop.
When file is copied to external drive, the file becomes corrupt from the external drive.
I have to repeat around 2 to 3 times or more to re-copy the file again until file is not corrupted.
Appreciate of any help.
Below is my system info:
Using Win 7 Ultimate 64-bit 4 gb of ram.
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name GIBBY-LAPTOP
System Manufacturer Sony Corporation
System Model VGN-SR26GN_B
System Type x64-based PC
Processor Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 2267 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. R1130Y1, 8/28/2009
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name Gibby-Laptop\Gibby
Time Zone Malay Peninsula Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.97 GB
Available Physical Memory 2.60 GB
Total Virtual Memory 7.93 GB
Available Virtual Memory 6.05 GB
Page File Space 3.97 GB
Page File C:\pagefile.sys

Ok, lets be brief.
This problem is annoying me for years. It is totally reproducible although random. It happens when copying to external drives (mainly USB) when they are configured for "safe removal". I have had issues copying to NTFS and FAT32 partitions. I have
had issues using 4 different computers, from 7 years old to brand new ones, using AMD or intel chipsets and totally different USB controllers, and using many different USB sticks, hard disks, etc. The only common thing in those computers is Windows 7 x64 and
the external drives optimization for "safe removal". Installing Teracopy reduces the chances of data corrpution, but does not eliminate them completely. The only real workaround (tested for 2 years) is activating the write cache in the device manager
properties of the drive. In that way, windows uses the same transfer mechanisms as for the internal drives, and everything is OK.
MICROSOFT guys, there is a BIG BUG in windows 7 x64 external drives data transfer mechanism. There is a bug in the cache handling mechanism of the safe removal function. Nobody hears, I've been years talking about this in forums. It is a very dangerous bug
because it is silent, and many non professional people is experiencing random errors in their backup data. PLEASE, INVESTIGATE THIS. YOU NEED TO FIX SUCH IMPORTANT BUG. IT IS UNBELIEVABLE THAT IT IS STILL THERE SINCE 2009!!!
Hope this helps.

ByteArrayInputStream as source for zip file entry corrupts the ByteArray

Hi All,
I have managed to create and add a (in-memory) zip file as an email attachment. I add a file to the zip file , then push data to this file via a ByteArrayInputStream.
Adding the file (created via ByteArrayInputStream) to an email works perfectly. If i then add another step and zip this file it corrupts the output.
It looks like it is turning the carriage return into a [] . Its 'almost right' as when I cut & paste the contents of the txt file i created (from the zip file) into Word it displays correctly, with the carriage returns. Is it some kind of encoding problem, or mime type issue?
My ByteArrayInputStream uses buf.append("\n"); for carriage returns. I think the problem is with
ByteArrayInputStream baIn = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc()) );where I think i need to encode this somehow. Here is the complete code to create and add the zip file to an email. Any isuggestions will be appreciated.
//START of new ZIP code
                                                                                         /* Specify files to be zipped */
                                                                                        // Create temp file.
                                                                                        //File temp = File.createTempFile(fileName, ".txt");
                                                                                        //temp.deleteOnExit();
                                                                                        //BufferedWriter bOut = new BufferedWriter(new FileWriter(temp));
                                                                                        //ByteArrayInputStream baInTemp = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc() ) );
                                                                                        //bOut.write( baInTemp.toString() );
                                                                                        //bOut.close();
                                                                                         String[] filesToZip = new String[3];
                                                                                         filesToZip[0] = "C:\\Program Files\\NetBeans3.6\\firstfile.txt";
                                                                                         filesToZip[1] = "C:\\Program Files\\NetBeans3.6\\secondfile.txt";
                                                                                         filesToZip[2] = "C:\\Program Files\\NetBeans3.6\\thirdfile.txt";
                                                                                         final String fileToZip = fileName;
                                                                                         /* Create a memory buffer to store the ByteArray, fixed size */
                                                                                         byte[] buffer = new byte[18024];
                                                                                         /* Specify zip file name */
                                                                                         String zipFileName= eq_rt.getReportName() + ".zip";
                                                                                         try {
                                                                                             /* Create ZipOutputStream to store the FileOutputStream */
                                                                                             // ZipOutputStream out = new ZipOutputStream(new FileOutputStream(zipFileName));
                                                                                             ByteArrayOutputStream byteArray = new ByteArrayOutputStream();
                                                                                             ZipOutputStream out = new ZipOutputStream(byteArray);
                                                                                             /* Set the compression ratio */
                                                                                             out.setLevel(Deflater.DEFAULT_COMPRESSION);
                                                                                             /* iterate through the array of files, adding each to the zip file */
                                                                                             for (int a = 0; a < filesToZip.length; a++) {
                                                                                                /* Print the filenumber being added to the zip */
                                                                                                System.out.println(a);
                                                                                                /* Associate a file input stream for the current file */
                                                                                               // FileInputStream in = new FileInputStream(filesToZip[a]);
                                                                                                   This ROCKS as it is passing a array into the text file .getBytes() seems
                                                                                                   to be the KEY in getting ByteArrayInputStream to WORK
                                                                                                //String strSocketInput = "TAIWAN";
                                                                                                //ByteArrayInputStream baIn = new ByteArrayInputStream(strSocketInput.getBytes());
                                                                                                //String strSocketInput = new String (getAttachementNoFormat(eq_rt.getStoredProc()).toString() );
                                                                                                //ByteArrayInputStream baIn = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc()) );
                                                                                                 ByteArrayInputStream baIn = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc()) );
                                                                                                //String strSocketInput = "TAIWAN";
                                                                                                //ByteArrayInputStream baIn = new ByteArrayInputStream(strSocketInput.getBytes());
                                                                                                /* Add ZIP entry to output stream. */
                                                                                                out.putNextEntry(new ZipEntry(filesToZip[a]));
                                                                                                /* Transfer bytes from the current file to the ZIP file */
                                                                                                int len;
                                                                                                while ((len = baIn.read(buffer)) > 0)
                                                                                                out.write(buffer, 0, len);
                                                                                                /* Close the current entry */
                                                                                                out.closeEntry();
                                                                                                /* Close the current file input stream */
                                                                                                baIn.close();
                                                                                            /* Close the ZipOutPutStream (very important to close the zip before you attach it to the email) Thanks DrClap */
                                                                                            out.close();
                                                                                            /* Create a datasource for email attachment */
                                                                                            // DataSource sourcezip = new FileDataSource(zipFileName);
                                                                                            DataSource sourcezip = new ByteArrayDataSource(byteArray.toByteArray(), zipFileName, "application/gzip" );
                                                                                            /* Create a new MIME bodypart */
                                                                                            BodyPart attachment = new MimeBodyPart();
                                                                                            attachment.setDataHandler(new DataHandler(sourcezip));
                                                                                            attachment.setFileName(zipFileName);
                                                                                            /* attach the attachemnts to the mail */
                                                                                            multipart.addBodyPart(attachment);
                                                                                         catch (IllegalArgumentException iae) {
                                                                                           iae.printStackTrace();
                                                                                         catch (FileNotFoundException fnfe) {
                                                                                           fnfe.printStackTrace();
                                                                                         catch (IOException ioe)
                                                                                         ioe.printStackTrace();
                                                                                       // End Of New ZIP code

I came up with 'a' solution (not sure if its the best way but appears to work)
\n = corrupt
\r\n = ok in zip

ITunes file transfer Problem - to new Windows 7 PC from old Windows XP PC

I have just followed the instructions regarding transfer of my iTunes music from my old PC to my new one, using an external hard drive. When I run iTunes, my library is totally empty!
I have checked the box in the iTunes Advanced Preferences window to enable Copy files to iTunes media folder when adding to library, as well as enabling the Keep iTunes media folder organized option.
I copied the main iTunes Media folder from mp old PC to the following folder in my new PC:
C:/users/adam/my music/iTunes/iTunes media
and when I check the folder, it contains the following:
(folder 110 MB) Album Artwork
(empty folder) Automatically Add To iTunes
(empty folder) Downloads
(folder 19.6 GB) iTunes Music
(folder 358 MB) Mobile Applications
(folder 2.93 MB) Previous iTunes Libraries
(iTunes database file 16 KB) iTunes Library Extras
(iTunes database file 32 KB) iTunes Library Genius
(iTunes database file 7.37 KB) iTunes Library
(XML document 24.5 KB) iTunes Music Library
(TMP file 4.53 MB) Temp File 1.tmp
(TMP file) Temp File.tmp
The parent folder, one level above the iTunes Media Folder (iTunes) contains the following:
(folder) Album Artwork
(folder 20.1 GB) iTunes Media
(database file 16 KB) iTunes Library extras
(database file 32 KB) iTunes Library Genius
(database file 3.82 KB) iTunes Library
(XML document 12.3 KB) iTunes Music Library
Please can someone help me shed light on this as I have spent an entire day trying to crack this, and I am now starting to feel ill :- (
Many thanks
AK

Importing your music folder will add in the tracks, but your playlists all live in the original .itl file. Not quite sure why any playlists were imported at all, though if you have exported m3u files then they could have been added in when you added the folder. iTunes records absoulte paths in these lists and ignores any file it can't find.
The stuff in the Temp folder can be thrown away once everything is working. Just safer than deleting in case you wanted/needed to reverse any actions.
At step 6 you should have had your original library complete with ratings, playlists, date added values etc., so I'm not quite sure where things have gone wrong.
When you moved everything up one level did that include an iTunes Library.itl file? Another way of asking the same question is when you got to step 6 did you have a completely blank library with the prompts to add music.
Perhaps the .itl file was corrupt. The .tmp files indicate something may have gone wrong at some point. What are the sizes/dates of the files in the Previous iTunes Libraries folder? The most recently dated of these, providing it is at least of a comparable size to its predecessors) may well be a better starting point. You can rename the current itl as iTunes Library (Temp).itl, copy the the older file up to the iTunes folder and rename it as iTunes Library.itl.
Use iTunes Folder Watch to update the library with tracks that have been added or removed since the backup file was created.
tt2

VDI 3 , ESX 3.5, USB File Transfer from DTU failing

Hey guys,
Some users have noticed that when copying files from a USB stick in the Sun Ray (2FS) (via mapped U drive) to say a network share, the transfer fails or the contents of the file are corrupt.
Anyone else had this issue or ideas on a fix?
THank you,
Dono

Sun Ray USB redirection operates at a lower level than the filesystem. USB redirection simply satisfies the data transfer requests sent to it by the filesystem. Empirical data suggests that the delays you're seeing is most likely due to Microsoft's implementation of the FAT32 filesystem reading the whole disk at mount time. Not being privy to Microsoft's code we can say that for sure. You'll find that the larger the disk capacity the longer it takes to mount.

"file is Corrupt" ?

I hav downloaded firefox's different versions frm different sites including official, but getting the same problem again n again that is "file is Corrupt" ? using win7. help

What security software do you have installed? try to disable it and then download again.
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections.
Or, download from another computer, transfer the file to a thumbdrive, then install it on your PC.

When my Bluetooth disconnects during a file transfer where is all the data? why do i have to start over?

while transfering a large video file from my phone to my imac i lost the bluetooth connection so where is all the data that was already transfered and how do i delete it?
can i pick up where it left off? if not why is it that i have to start over?
also it would be nice if the imac warned me of the file transfer when i try to put the computer to sleep. i put it to sleep out of habit right in the middle of a 3 hour transfer.

''FredMcD [[#answer-722558|said]]''
<blockquote>
In the address bar, type '''about:crashes'''<enter>.''' Note:''' If any reports do not
have '''BP''' in front of the numbers/letters, click it and select '''Submit'''.
Using your mouse, '''mark''' the most '''resent 7 - 10''' crash reports, and
'''copy''' them. Now go to the reply box below and '''paste''' them in.</blockquote>
They all have BP in front of them:
bp-d4ede524-e8fe-4683-afe1-3310c2150421
bp-6baa12d9-39d9-4bdf-b936-c900d2150421
<blockquote>You may have a corrupt '''cookies.sqlite''' file.
Type '''about:support''' in the address bar and press enter.
Under the page logo on the left side you will see '''Application Basics.'''
Under this find '''Profile Folder.''' To it’s right press the button
'''Show Folder.''' This will open your file browser to the current
Firefox profile. Now '''Close Firefox.'''
Locate the '''cookies.sqlite''' file. Then rename or delete it. Restart Firefox.
</blockquote>
The files listed are: cookies.sqlite cookies.sqlite.bak cookies.sqlite.bak-rebuild. I tried deleting the cookies.sqlite file but I think the cookies.sqlite.bak-rebuild rebuilds it. In any case when I reopened firefox It was the same I still have to sign in all the time.

File .exe corrupted when downloading

When I download a .exe file using WLS 6.0, the file download corrupted. I am using the mime-type "application/octet-stream" for the mapping in the servlet. Another files such flash or waw are downloading well using their mime-types. I don't know what is happening...
          Thanks


Can you investigate more on the nature of the file's corruption? E.g., is the
          downloaded length correct (not being padded or truncated)? Are high-bytes
          being stripped-off? Does it happen for small and large .exe files or only files
          above a certain size?
          Also, are there any firewalls in between the servlet and the client which might
          be interfering with the .exe's transfer? (For example, any virus proctection
          schemes?) If you open the corrupted .exe file using a hex-editor, what do you
          see?
          regards,
          -Ade
          "Diego" <[email protected]> wrote in message news:3d344658$[email protected]..
          > When I download a .exe file using WLS 6.0, the file download corrupted. I am using the mime-type
          "application/octet-stream" for the mapping in the servlet. Another files such flash or waw are downloading well using
          their mime-types. I don't know what is happening...
          >
          > Thanks

Tiger Updates Have Broken Airport Appleshare File Transfer, Horribly Slow

Big horrible slowdowns in file transfer over wireless have me pulling my (remaining) hair out. I have seen several other posts and here are results of what I found. Hope you can add some suggestions.
I had given my Apple Airport base station (b) to my brother in Pakistan after I found a Belkin (g) at Staples for free (after rebates) and have been using it for a while (maybe almost 2 years). Not a pretty box but the price is beautiful and it works OK.
My real use for it is for my eMac and a couple of older PowerBooks I keep downstaors as a "music studio" for my music and podcast recording (and transferring upstairs to my server folder over wireless) and web browsing.
All worked OK as I would transfer the files to my PowerBook upstairs (connected Ethernet to a router connected to the wireless router or sometimes directly via Airport connection if laptop was not at my desk). Both configurations worked fine (only limitation being my eMac's (b) speed older Airport speed).
Since 10.4.4 or 10.4.5 (as that is the last "change" I can see made on my system overall, I have discpovered I cannot even transfer a 3.5 MB file from the 10.4.5 eMac to ANY of the other machines.
After reading several threads here it seems several people have noticed the HORRIBLE SLOWDOWN if not complete death of Airport usability for file transfer. People are being made to go around changing router settings, channel IDs etc. That sounds like typical tech support bunk to me.
After all, if the channel ID on the wireless router is a problem why is my web browing going on at normal speed but a 120 MB file transfer just told me it will take 2023642128 hours. No, I am not kidding. That is the time it would take to get man to Mars.
Someone else was told to hook up the machines over Ethernet. Sure, that works for machines in the same room - and is a bearable temporary solution in that case - but not in an upstairs/downstairs situation. Burning CD-Rs to transfer 120 MB files every time is also not a good way to show off Apple technology.
So, in my humble opinion, some recent update from Apple just broke something in Airport networking or Appleshare. So, I did some more testing.
I love Apple, getting friends to switch all the time, but annoyed at these bugs that basically render standard applications unusable. So far I have not been able to figure out what the problem is. Here is some more info I got.
I already deleted all the network port configurations on the 10.4.5 eMac except wireless. Activity Monitor shows 0.1 to 11 kbps speed (yes, that is 0.1 to 11 Kbps not Mbps). No other apps are running, Tried connecting to different machines. All machines can transfer data at high speed except over Airport/wireless.
I then fired up a PowerBook G3 500 10.3.9. It is slow as a machine, but it has no problems picking and dropping files on to other machines over Airport (it is sitting in the same area as the emac so signal etc. issues would effect them equally).
Next I came upstairs and changed my 10.4.5 PowerBook G4, previously working perfectly on Ethernet,to Airport only use. Lo and behold, it could not go to the Internet nor could it do any AppleShare transfers even with a PowerMac G4 which is Ethernet only.
There could still be two culprits, the Apple 10.4.5 update OR maybe the wireless router went bad. So I tried all of the above after changing channels on the Belkin router. Still no luck.
It could still be the router, so:
- I changed the HP 17" 8080 laptop from Ethernet to wireless only and it flies.
- I switched the PowerBook G4 BACK to Ethernet and it flies.
- I kept the PC laptop on WIRELESS and did file transfers from it to the now ETHERNET using PowerBook G4 and it works fine even PowerBook to PC and PowerBook to PowerMac both using Ethernet and 10.4.5 works fine too.
- I now tried to get or put files from the 10.4.5 ETHERNET PowerBook G4 to PowerBook G3 10.3.9 WIRELESS and it worked fine. i.e. no problems with older OS one using wireless.
- Then I tried 10.4.5 PowerBook G4 Ethernet to eMac wireless 10.4.5 and it would not take or drop a file, unless I was willing to wait for 3 years and 2 months.
In other words - the ONLY common thread is that 10.4.5 with wireless/Airport use will break Appleshare file transfers.
Obviously some planetary confluence did not suddenly corrupt all the settings in all my computers at the same as many others, who also happen to be using 10.4.5 or maybe 10.4.4 because the 10.3.9 using OLD PowerBook with 512 MB RAM does wireless file transfers faster than the 10 times faster Macs using Apple's own cards and newest software.
Seems like a now-becoming-usual Apple update that breaks things.
Hope you can suggest a solution so I do not have to burn CDs on the eMac for every 1 MB file I need to transfer upstairs.
Imran

Oosted on macfixit.com Friday, February 24 2006 @ 09:30 AM PST
Mac OS X 10.4.5 (#9): Another fix for network slowness -- re-applying the combo updater; SIIG FireWire card not working; more
Another fix for network slowness -- re-applying the combo updater Over the past few days we've outlined a number of fixes for network slowness that occurs after the update to Mac OS X 10.4.5, including entry of a DNS address, toggling of IPv6 and more.
We've now received notes indicating that a tried and true workaround for various issues -- re-applying the Mac OS X 10.4.5 combo updater (as noted in our general workarounds for 10.4.5) -- can have beneficial effects in this case as well.
MacFixIt reader Fred Moore writes:
"After much thrashing about and wasted time, I appear to have solved both the slow web page loading as well as my email sending problems in one stroke. Guess how: download the Mac OS X 10.4.5 combo updater and reapply it. This nonsense has cost me a lot of time but everything seems to work now. IPv6 is set back to Automatic, there is no entry in the Network prefs DNS server field, and my email sending works perfectly (so far; I've sent a bunch of tests). Why didn't I just download the combo updater and apply from my hard drive at the beginning? Well, Software Update should (yes, I know, I know...) work. I'll never again use Software Update for a system update."

File transfer error 36

Trying to transfer files between iMac and iPod classic 60GB (model circa 2005). The file transfer process begins without problem until I get the following error for a file. When I open the source document(s) they display just fine.
In researching this issue, I disk repaired both the iPod (no errors), and the iMac (error found and repaired). Still no joy in transferring files.
Another issue is that if I remove the 'corrupt' file it is necessary to start the file transfer process from scratch . . . until the next 'corrupt' file hits. Any way to have the system not transfer the 'corrupt' files and have them listed in a transfer log so I can manually tinker with them since they do open and display properly on my iMac.
Appreciate any help with this issue.
ERROR MESSAGE:
The finder cannot complete the operation because some data in "<file name> could not be read or written. (Error Code - 36).

http://osxdaily.com/2015/02/21/fix-error-code-36-finder-mac-os-x/

"Windows - No Disk" error message on file transfer

Hello!
I updated our ZDM7 server from plain old ZDM7 with no updates to ZDM7 SP1
IR1. Now, when initiating File Transfer operation with any workstation, up
comes this error message:
"Windows - No Disk"
"Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c"
[Cancel] [Try Again] [Continue]
If I click "Continue" 4 times, file transfer starts up successfully.
Any ideas about how to get rid of this annoying message?
Toomas Aas

Toomas,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

I can't download firefox. When I click on run, I get a window saying that the author is unknown. When I click on run in the new window, another window says the file is corrupt. What can I do about this?

I want to have firefox as my default browser. As this is a new laptop, I hasve to download firefox. As per the instructions, I click on "run" to complete the download, but instead of completing the download, a window appears which says that the author is unknown. If I ignore the window and click on run, I get another window which says the file is corrupt and I can't finish the download and have firefox as my browser.
I have windows 7 and explorer is the default browser and I want to change to firefox, but so far am being prevented from doing so. How can I successfully download firefox?

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See also:
* http://kb.mozillazine.org/Unable_to_save_or_download_files

ITunes 6.0.1 for XP wont install, says installation file is corrupt -

Is this the same error as other people have been getting?
It says Installation file is corrupt, download a fresh copy and try again.
Same error.
This is happening on my friends windows XP machine, it happened on my dads,(problem solved, dont know how??? just d/l it and it worked when i was trying to fix it before i did anything) and on a work mates.
Today, because of this, he formatted his pc, and put everything back on. He tried to install iTunes as soon as he possibly could, no luck. deleted any trace it left, and installed SP 2 etc all the updates. Still no luck. Exact same error.

hi Lee!
It says Installation file is corrupt, download a fresh copy and try again.
hmmm. this has been known to be caused by an nvidia firewall:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=813136
... but if that doesn't seem to be relevant, you could also try downloading from the "QT + itunes" site:
http://www.apple.com/quicktime/download/win.html
... or using a different browser for the download.
if no joy with that, we could also try cutting the Gordian knot:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=812538
keep us posted.
love, b

SD File Transfer Corrupts

Similar Messages

Maybe you are looking for