SD FLOW AND MM FLOW

Hi All,
can any one explain regarding SD FLOW AND MM FLOW clrearly..
urgent.
rgdsm

Hi
SD FLOW
SD Flow Cycle:
INQUIRY ( VA11)
|
QUOTATION (VA21)
|
PURCHASE ORDER (ME21)
|
ORDER CONFIRMATION (VA01)
|
PICKING LIST (VL36)
|
PACKING LIST - (VL02, VL01)
|
SHIPPING (VT01)
|
INVOICE (VF21, VF01)
|
AR
Enquiry - Customer enquires about the Products services that were sold by a company - VA11
Quotation - Company Gives a Quotation for the products and Services to a Customer
Sales Order - Customer gives a Purchase order to the company agaionst which a Sales order will be raised to Customer in SAP.
VBAK: Sales Document(Header Data) (VBELN)
VBAP: Sales Document(Item Data) (VBELN,POSNR,MATNR,ARKTX,CHARG)
      Enquiry, Quotation, Sales Order are differentiated based on Doc.
      Type(VBTYP field) in VBAK,VBAP Tables( for Enquiry VBTYP = A,
      for Quotation 'B' & for Order it is 'C'.)
Delivery(Picking, Packing, Post Goods Issue and Shipment)->
Company sends the material after picking it from Godown and Packing it in a Handling Unit(box) and Issues the goods
LIKP: Delivery Table (Header Data)(VBELN,LFART,KUNNR,WADAT,INCO1)
LIPS: Delivery Table (Item Data)(VBELN,POSNR,WERKS,LGORT,MATNR,VGBEL)
      (LIPS-VGBEL = VBAK-VBELN, LIPS-VGPOS = VBAP-POSNR)
Billing - Also company bills to the customer for those deliveries
And in FI against this billing Accounting doc is created.
VBRK: Billing Table(Header Data)(VBELN,FKART,BELNR)
VBRP: Billing Table(Item Data)(VBELN,POSNR,FKIMG,NETWR,VGBEL,VGPOS)
      (VBRP-AUBEL = VBAK-VBELN, VBRP-VGBEL = LIKP-VBELN)
      Apart from these tables there are lot of other tables which starts with
      V, but we use the following tables frequently.
MM Cycle:
Purchase Requisition-> STaff in an orgn places Pur requisition for want of some goods/products - ME51
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
Purchase Order(PO)-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Invoice Verification-> ALong with the Material Vendor submits a Invoice for which the Company Pays the amount - .MIRO
Data to FI -> data will be posted to FI as per the vendor invoices
you better go through all these links u will get all the info what ever u need
for sd
http://www.sapgenie.com/abap/tables_sd.htm
Please check this SD online documents.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCSD/CAARCSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_SD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSD/BCBMTWFMSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLISPLN/LOLISPLN.pdf
Also please check this SD links as well.
http://help.sap.com/saphelp_47x200/helpdata/en/92/df293581dc1f79e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/dd/55f33e545a11d1a7020000e829fd11/frameset.htm
http://www.sap-basis-abap.com/sapsd.htm
http://www.sap-img.com/sap-sd.htm
http://www.sapgenie.com/abap/tables_sd.htm
http://searchsap.techtarget.com/featuredTopic/0,290042,sid21_gci961718,00.html
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/SD_tutorial.html
All help ebooks are in PDF format here
http://www.easymarketplace.de/online-pdfs.php
for mm
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
Reward points if useful
Regards
Anji

Similar Messages

How can I create a document with two columns in which the text in the left hand column flows to the left column on page 2,3 etc, and doesn't interfere with the text I want to place in the right? Pages 5.

I'm using pages 5 and want to comment in a right hand column, on a (latin) text which I wish to place in a left hand column.
Ideally I'd like to be able to copy and paste the latin text and see it flow over into the left hand column on multiple pages.
At the moment it is impossible for me to keep the text only in the left hand column Any help!?
B

Columns do what columns do, flow from the bottom of the left hand column to the top of the right hand next column. So won't do what you want.
Your tag says you are using OS X 10.5.8 but you say you are using Pages 5 so one or the other is not correct.
If you migrated up to Pages 5 what did you do with your previous Pages '08 or '09?
Because Pages 5 is missing over 100 features, one of which is Textbox linking, that would allow to flow down through a series of Textboxes set up like columns.
What you can do is run the Latin text down a narrow document to the left and add individual Textboxes to the right and put your English translations in those. The Latin will flow but the English will not.
Peter

Why is the LookUp object in the Flow Task of my SSIS package going red (and not working) ? Sql Server 2008 R2

I have been working with the Sql Server 2008 R2 SSIS Tutorial at
https://msdn.microsoft.com/en-us/library/ms170419(v=sql.105).aspx
--specifically -- Lesson 1. I have been having some problems with this lesson where the source data from the samples download doesn’t exactly match the data described in the tutorial, and the tables in the tutorial are different from what
is contained in AdventureWorksDW (tutorial refers to DimTime – AdventureWorksDW contains DimDate and no DimTime).
So, after futzing in BI with this tutorial so that I can at least get it to run in Debug – it errors out on the 2nd LookUp object.
Rather than looking for a fix to the problem(s) that I am having between the tutorial and the stuff I downloaded in the samples --
I want “Adapt” the tutorial so I can use the stuff I downloaded and hopefully learn how to use SSIS with the elements (source data and tables) that are present on my workstation.
Here is a description of what is going on for me – which I really don’t understand what is going on in BI – based on the images below – like what columns (from what tables) are they associating to in the OleDB Destination?
Note: the sql in the LookUps here is the sql that I copied from the tutorial.
I probably need to modify these sql statements – so -- the help I am requesting is to make the required modifications/changes
so that I can adapt this tutorial with the stuff that’s on my workstation.
I downloaded the samples and the AdventureWorksDW mdf for Sql Server 2008 R2.
It turns out that in the tutorial it wants me to select a DimTime table, but the version of the AdventureWorksDW db does not contain a DimTime table.
Instead, it contains a DimDate table. So I tried adapting DimDate for the tutorial.
Additionally, the sample data file -- SampleCurrencyData.txt -- has slightly different data types than the types described in the tutorial, so I selected data types for the columns in the datasource text file that would work in BI would to
connect column from source data file to the table.
After finishing all the steps for Lesson 1 -- when I tried debugging the package – and it error'd out on the 2nd Lookup object whichwent red.
 I edited the lookups and the sample Ole DB Destination to "ignore on fail” and I did all
green but the FactCurrencyRate table is not being populated -- as described in the tutorial, so I reset the on error back to default (Fail on error option). And based on this tutorial -- I believe FactCurrencyRate
table is the table which is supposed to be populated with the data from SampleCurrencyData.txt?
In the sample data file that downloaded with all the samples I removed all the data from the text file except for 6 rows, so instead of the original 1100 or so rows, I have only 6 rows of data in the source data file (just to keep things
simple for debugging for now). I did not modify the data itself.
Here is what the (raw) data contained in SampleCurrencyData.txt looks like (from the samples that I downloaded from codeplex) – it’s supposed to be 4 columns of data – float, nvarchar, datetime, float:
0.281690141 USD
6/26/2004 0:00 0.281713948
0.281690141 USD
6/27/2004 0:00 0.281642539
0.281690141 USD
6/28/2004 0:00 0.281761573
0.283286119 USD
6/29/2004 0:00 0.283221933
0.283286119 USD
6/30/2004 0:00 0.283358363
0.281690141 USD
7/1/2004 0:00 0.281682206
Below are images of my BI Layout for Lesson 1 from this tutorial -- the FlatFile and configurations for On Fail Error, A Flow task, the 2 LookUps (CurrencyKey and DataKey), the OleDB Destination configuration, the Design view of the associated tables and
the Debug Run of Lesson 1, and the following error messages. My goal is to figure out what is going on in BI for this tutorial.
Error: 0xC020901E at Extract Sample Currency Data, Lookup Datakey [51]: Row yielded no match during lookup.
Error: 0xC0209029 at Extract Sample Currency Data, Lookup Datakey [51]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.
The "component "Lookup Datakey" (51)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Match Output" (53)" specifies failure on error. An error occurred on the specified
object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047022 at Extract Sample Currency Data, SSIS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED.
The ProcessInput method on component "Lookup Datakey" (51) failed with error code 0xC0209029 while processing input "Lookup Input" (52). The identified component returned an error from the ProcessInput method. The error is specific
to the component, but the error is fatal and will cause the Data Flow task to stop running.
There may be error messages posted before this with more information about the failure.
--this is the flat file
-- SampleCurrencyData.txt (which only contains 6 data rows for my purposes)
--and here is where I assign the data types for the colums of -- SampleCurrencyData.txt
This is the first LookUp Object -- LookUp Currency Key – The DB contains DimCurrency table.
I copied the sql from the tutorial here.
I actually have a DimCurrency table in my copy of AdventureWorksDW.
Here’s the design view of DimCurrency and a sample of the data contained in DimCurrency and the On Fail configuration
I actually have a DimCurrency table in my copy of AdventureWorksDW.
Here’s the design view of DimCurrency and a sample of the data contained in DimCurrency and the On Fail configuration
--Here is what the data looks like in the DimCurrency table
--2nd LookUp object -- LookUp Data Key – this is the LookUp
where BI errors out on Debug
--it appears this lookup is referencing the DimDate table – which I DO have in the DB.
--I can’t find the following sql in the tutorial, so I suppose BI added the sql (did it?)
--Here's how I configured for On Error
--Here is DimDate table in Design view
--Here is a sample of the original data contained in DimData
OleDB Destination
--Here is where I get lost a bit – what is going on in the destination here?
--Here's my On Error configuraino
--and here is the FactCurrencyRate table
--and here is a sample of the data contained in FactCurrencyRate
Rich P

Thank you for your reply. I changed the error handling as you suggested on the 2nd lookup to redirect to unmatched rows. Now I get all greet. I don't have the conditional split as in your diagram. But also, nothing appears to have
happened in the DB. Aren't the rows in my text file supposed to be added to the FactCurrencyRate table?
How do I get a conditional split?
Rich P
OK, sorry I forgot to reply you back.
Conditional Split was just dummy task. Ignore it.
Manipulate the data in such way that you get matching records.
Inside Source, for first 2 rows I put the dates which are available in DimDate.
1.00010001,ARS,7/1/2005 0:00,0.99960016
1.00010001,ARS,2/5/2006 0:00,1.001001001
1.00020004,ARS,9/5/2001 0:00,0.99990001
1.00020004,ARS,9/6/2001 0:00,1.00040016
1.00050025,ARS,9/7/2001 0:00,0.99990001
1.00050025,ARS,9/8/2001 0:00,1.001001001
Then in OLE DB Destination, I loaded the rows to TestFactTable.
(Now, you don't even need NO MATCH OUTPUT as there are matching records here)
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

What is difference between ADF Task Flow and Faces-Config - when delpoy ?

What is difference between ADF Task Flow and Faces-Config? When I create navigation between pages with ADF task flow then the navigation don't work when I deploy my application to Weblogic 10.3. When I use default server then navigation works fine. With Faces_config in both situations all works ok - on Stanalone server and default.
Where is the problem?
Best regards!

Shay, I don't use both faces-config and adf task flow! When I failed with task flow I tried faces-config.
I have active on my weblogic - adf.oracle.domain(1.0,11.1.1.0.0). This is the right ADF? If yes then where is the problem?
Best regards!

How do I access a value of a variable in SSIS and control the flow accordingly based on its value?

So I have a Foreach Loop Container that Enumerates a read Excel spreadsheet and this Foreach Loop get its User::SheetName. Can I change my flow accordingly based on the value of the User Variable User:SheetName that is dynamically valued by the Foreach Loop
Container? So if the User::SheetName is "Enrolled", I want to load that worksheet to a certain SQL Server Table using an Excel Source and OLE DB Destination and if the User::SheetName is "Engaged", I want to load its worksheet contents
to a different SQL Server Staging Table. What Task can I use to determine the value of User::SheetName or am I going to have to write a C# script to do this?
Any help and/or suggestions are GREATLY appreciated.
Thanks!

Hi ITBobbyP,
According to your description, you want to read data from excel by using the Foreach Loop container with the appropriate enumerator. If that is the case, please refer to the following steps:
Inside the ADO NET enumerator, add a data flow task.
Inside the data flow task, add an Excel source.
Open the Excel source, and point to the Excel data source set up in the file enumerator.
Select one of the sheets that shows in the drop down.
Close the Excel source.
Select the Excel source.
In the properties window, copy the name of the sheet you selected. It's in the 'OpenRowset' property.
Set this as the initial string in your sheet name variable created to gather the sheet name from the ADO NET enumerator.
Select the Excel source.
In the properties window, change the 'AccessMode' to OpenRowset from Variable. This will change the property 'OpenRowset' to 'OpenRowsetVariable'.
Change the 'OpenRowsetVariable' to the variable created to hold the sheet name via the dropdown.
Open the Excel source. You should see your variable as the sheet name.
Click the 'Columns' tab to verify you can connect and mess with columns.
For detail information, please refer to the following document:
https://technet.microsoft.com/en-us/library/ms345182.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Actual data flow of AR and AP line Items in profit center accounting

Hi all,
I was trying to configure profit center accounting.
1.I was not able to transfer accounts receivable and payable balances.Can any body help on this.
2.Also values are not flowing into customer and vendor reports in PCA
Regards
Pratiksha

Thank you So much that was useful one.
Can you please tell me the values from customer and vendor flow into Profit centers.In reports like S_ALR_87013345 - Profit Centers: Customers (Transferred Periodically) values are not being posted
Waiting for answer
Thanks

Cash Flow Statement - Opening and Closing balances!

Dear Friends,
I have created cash flow statement (Indirect Method) using T code FSI1 and FSI4 (Form)..........but i am not able
Why wouldnu2019t Cash and Cash Equivalents at the End of the Year (Fiscal 2008) be EXACTLY equal to Cash and Cash Equivalents at the Beginning of Year (Fiscal 2009)...?
How do we need to set up for Cash for Current year closing balances and Next year's opening balances....?
Thanks,
Elan N.

Hi,
I tested in ECC6.0 and i could able to do so, you try as mentioned below.
In the output screen of MB5B, goto menu details > click on list > select save > select file > select spreadsheet. Here you can save tthe output in excel format.
Regards,
Prabu

WBS, Business Area and Profit Center not flowing in GR/IR Account

Hello Experts,
I have come across a very strange situation. I have two MIGO documents which are showing different posting characteristics:
1) FI Document 5000000553
In this document, the Business area and profit center is flowing in GR/IR Clearing Account (15660000) but WBS element is not flowing to this line item.
Screen shot is as follows:-
As you can see from the above screen shot that, for GR/IR Account 15660000. Only Business Area and Profit Center are flowing and WBS Element is not coming.
2. FI Document 5000015602
In this document, the WBS element is going in GR/IR Clearing Account (15660000) but Business area and profit center is not flowing to this line item
Screen Shot is as follows:-
From the above screen shot, Business Area and Profit Center are not flowing but WBS Element is coming.
Could you please let me know what could be the possible reason for this behavior of both the documents.?
Regards,
Amit

Hi Saurabh,
Its great to see your reply. Yes, I know that currencies and posting dates are different. But that's the way it is. One document is for fiscal year 2014 and other is for 2013. There is nothing related to currency and posting date which was causing the strange behavior of the system.
However, our team analyzed the issue and found that only for service material having a special valuation type related to services is causing the problem and still we are diagnosing the other possible root cause as well.
Thanks for your co-operation and suggestion.
Regards,
Amit

The value of JMIP ( inventory BED) and SEcess( JSEI) is not flowing in MIGO

Dear Friends,
The Value of JEC2 is flowing in MIGO but the value of JMIP and JSEI is not flowing in MIGO excise invoice tab.
Please suggest me the possible reasons.
Regards,
Balakrishna R.V

hii
Your requirement is for Non deductable or deductable duties ??
If its deductible , then u shld not maintain in NVV in conditions .
IF its non dedcutible then u have to maintain in NVV , then it won't show any break up duty calcualtion in MIRO.
Ther in MIRO it will show u total amount it taken into account of materials i.e , inventory account .
Hope it'll help u .
IF not revert with detailed process how u r doing with procurement type .
Thanks

Training and Event management.Process Flow..

Hi, Experts,
Can any body give me some notes on Training and event management and process flow also like integration between ECC-6.0 to Non SAP
1.Training request
2.Appraisal documents for performance feedback
3.Tracking Feedback processes
Pls help me in configuring these services.
With Regards,
San Rao.

Hi san rao,
as per your reply you using the new appraisal template and also you have released the template now simply run the BSP application HAP_DOCUMENT and access the appraisal documents
attach these BSP applications in your portal system.
following pages of the above application will be help full
documents_todo
documents_received_open2
documents_where_participated
Regards,
Umesh Chaudhari.

Material Management Flow and FI/CO Flow

Hi All,
Can anybody send me detailed processflow of Material Management and FI/CO or any websites providing the same.
Thanku
sanju

Hi Sanju,
By using this site you will get more information rearding MM flow:
script names
For fi/co architecture open this link, it will be help ful to you..
script names
Hope this helps you, reply for queries, Shall post you the updates.
Regards.
Kumar. .

Flow and Static checks

Hi there,
I created a datamodel and have applied a condition to it. When I execute the interface the invalid records are captured in the E$ table but all the other valid records do not appear on the target table. I couldn't able to find the reason for this. I have applied flow and static check to the condition and the same for the table column. Im not sure why the validate records are rejected.
Any help is appreciated.
Cheers

HI!
Let me understand, do you want the invalid records at target table?
If you use the flow control it will keep the records at E$ and WILL NOT load it.
If you use static control, it will LOAD the data and, after that, verify what are the records with problems.
Don't use both controls at same time, it doesn't make logical sense unless when needs to validate distinct constraints at each moment.
Does it help you?

Task Flow Transaction Behavior and AM Activation/Passivation

Hi All,
In my app, when I changed the transaction behavior from 'No Controller Transaction' to 'Use Existing Transaction If Possible', I started seeing the following type of AM Passivation snapshot is JDev log:
<ADFLogger> <begin> Passivating Application Module
<PCollManager> <resolveName> [3560] **PCollManager.resolveName** tabName=PS_TXN
<DBTransactionImpl> <getInternalConnection> [3561] Getting a connection for internal use...
<DBTransactionImpl> <getInternalConnection> [3562] Creating internal connection...
<ADFLogger> <begin> Establish database connection
<DBTransactionImpl> <establishNewConnection> [3563] Trying connection: DataSource='weblogic.jdbc.common.internal.RmiDataSource@4d0ca0'...
<DBTransactionImpl> <establishNewConnection> [3564] Before getNativeJdbcConnection='weblogic.jdbc.wrapper.JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection
<DBTransactionImpl> <establishNewConnection> [3565] After getNativeJdbcConnection='weblogic.jdbc.wrapper.JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection
<ADFLogger> <addContextData> Establish database connection
<ADFLogger> <end> Establish database connection
<OraclePersistManager> <syncSequenceIncrementSize> [3566] **syncSequenceIncrementSize** altered sequence 'increment by' value to 50
<ViewObjectImpl> <doPassivateSettings> [3567] DateTimeVO1 passivating with paramsChanged
<Serializer> <passivate> [3568] <AM MomVer="0">
<cd/>
<TXN Def="1" New="0" Lok="2" tsi="0" pcid="40"/>
<CONN/>
<VO>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.BaseRoutingMainVO" Name="BaseRoutingMainVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.BaseRoutingDetailsVO" Name="BaseRoutingDetailsVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.BaseParameterVO" Name="BaseParameterVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.BaseErrorLookupVO" Name="BaseErrorLookupVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.BaseCompDataHdrVO" Name="BaseCompDataHdrVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.BaseCompDataDtlVO" Name="BaseCompDataDtlVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.BaseDataReqValVO" Name="BaseDataReqValVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.BaseRegistrationPointVO" Name="BaseRegistrationPointVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.BaseTradingPrtnrInfoVO" Name="BaseTradingPrtnrInfoVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.BaseTradingPrtnrVerCtrlVO" Name="BaseTradingPrtnrVerCtrlVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.BaseNotificationVO" Name="BaseNotificationVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.BaseTransactionDefVO" Name="BaseTransactionDefVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.BaseValidationTypeVO" Name="BaseValidationTypeVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.OrigTransDetailsVO" Name="OrigTransDetailsVO1"/>
<VO sig="1315216374468" qf="0" ut="0" da="1" It="1" St="0" im="1" Ex="1" Def="com.emerson.eth.adf.model.view.TradingPartnerBaseVO" Name="TradingPartnerBaseVO1">
<rsq>
<![CDATA[SELECT /*+ FIRST_ROWS */ * FROM (SELECT 'X' AS TRADING_PARTNER_ID FROM DUAL) QRSLT ]]>
</rsq>
<Key>
<![CDATA[00010000000158]]>
</Key>
</VO>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.TransErrorVO" Name="TransErrorVO1"/>
<VO sig="1315216374468" qf="0" ut="0" It="1" Sz="25" St="0" im="1" Ex="1" Def="com.emerson.eth.adf.model.view.DateTimeVO" Name="DateTimeVO1">
<exArgs count="1">
<arg name="TimeZone">
<![CDATA[GMT]]>
</arg>
</exArgs>
<rsq>
<![CDATA[SELECT /*+ FIRST_ROWS */ * FROM (SELECT CurrentTime FROM
SELECT TO_CHAR(SYSDATE,'DD-MON-YYYY HH:MI AM') AS CurrentTime, 'GMT' AS TZ FROM DUAL
UNION
SELECT TO_CHAR(SYSDATE+5.5/24,'DD-MON-YYYY HH:MI AM') AS CurrentTime, 'IST' AS TZ FROM DUAL
UNION
SELECT TO_CHAR(SYSDATE-8/24,'DD-MON-YYYY HH:MI AM') AS CurrentTime, 'PST' AS TZ FROM DUAL
UNION
SELECT TO_CHAR(SYSDATE-6/24,'DD-MON-YYYY HH:MI AM') AS CurrentTime, 'CST' AS TZ FROM DUAL
UNION
SELECT TO_CHAR(SYSDATE-5/24,'DD-MON-YYYY HH:MI AM') AS CurrentTime, 'EST' AS TZ FROM DUAL
WHERE TZ=:TimeZone) QRSLT ]]>
</rsq>
<Key>
<![CDATA[0000000000010000013239013AC4]]>
</Key>
</VO>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.TransTrackingVO" Name="TransTrackingVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.TransDependencyVO" Name="TransDependencyVO1"/>
<VO sig="1315216374468" qf="0" ut="0" da="1" It="1" St="0" im="1" Ex="1" Def="com.emerson.eth.adf.model.view.TradingPartnerBaseVO" Name="TradingPartnerBaseVO2">
<rsq>
<![CDATA[SELECT /*+ FIRST_ROWS */ * FROM (SELECT 'X' AS TRADING_PARTNER_ID FROM DUAL) QRSLT ]]>
</rsq>
<Key>
<![CDATA[00010000000158]]>
</Key>
</VO>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.ReceiverTransDetailsVO" Name="ReceiverTransDetailsVO1"/>
<VO sig="1315216374468" qf="0" ut="0" da="1" It="1" St="0" im="1" Ex="1" Def="com.emerson.eth.adf.model.view.TransIDBaseVO" Name="TransIDBaseVO1">
<rsq>
<![CDATA[SELECT /*+ FIRST_ROWS */ * FROM (select 1 AS transaction_record_id from DUAL) QRSLT ]]>
</rsq>
<Key>
<![CDATA[000100000002C102]]>
</Key>
</VO>
<VO sig="1315216374468" qf="0" ut="0" da="1" It="1" St="0" im="1" Ex="1" Def="com.emerson.eth.adf.model.view.TransKeyBaseVO" Name="TransKeyBaseVO1">
<rsq>
<![CDATA[SELECT /*+ FIRST_ROWS */ * FROM (SELECT 'X' AS document_key FROM dual) QRSLT ]]>
</rsq>
<Key>
<![CDATA[00010000000158]]>
</Key>
</VO>
<VO sig="1315216374468" qf="0" ut="0" da="1" It="1" St="0" im="1" Ex="1" Def="com.emerson.eth.adf.model.view.TransStatusBaseVO" Name="TransStatusBaseVO1">
<rsq>
<![CDATA[SELECT /*+ FIRST_ROWS */ * FROM (SELECT 'X' AS STATUS FROM DUAL) QRSLT ]]>
</rsq>
<Key>
<![CDATA[00010000000158]]>
</Key>
</VO>
<VO sig="1315216374468" qf="0" ut="0" da="1" It="1" St="0" im="1" Ex="1" Def="com.emerson.eth.adf.model.view.ErrorTypeBaseVO" Name="ErrorTypeBaseVO1">
<rsq>
<![CDATA[SELECT /*+ FIRST_ROWS */ * FROM (SELECT 'X' AS ERROR_TYPE FROM DUAL) QRSLT ]]>
</rsq>
<Key>
<![CDATA[00010000000158]]>
</Key>
</VO>
<VO sig="1315216374468" qf="0" ut="0" da="1" It="1" St="0" im="1" Ex="1" Def="com.emerson.eth.adf.model.view.DependencyBaseVO" Name="DependencyBaseVO1">
<rsq>
<![CDATA[SELECT /*+ FIRST_ROWS */ * FROM (SELECT 'X' AS DEPENDENCY FROM DUAL) QRSLT ]]>
</rsq>
<Key>
<![CDATA[00010000000158]]>
</Key>
</VO>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.MasterTransDependencyVO" Name="MasterTransDependencyVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.TrackingVO" Name="TrackingVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.ErrorVO" Name="ErrorVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.DashboardTransErrorVO" Name="DashboardTransErrorVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.DashboardTransDependencyVO" Name="DashboardTransDependencyVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.DashboardTransPieVO" Name="DashboardTransPieVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.DashboardMasterTransBarVO" Name="DashboardMasterTransBarVO1"/>
<VO sig="1315216374468" qf="0" ut="0" da="1" It="1" Sz="25" St="0" im="1" Ex="1" Def="com.emerson.eth.adf.model.view.ReceiverTransStatusBaseVO" Name="ReceiverTransStatusBaseVO1">
<rsq>
<![CDATA[SELECT /*+ FIRST_ROWS */ * FROM (SELECT 'X' AS STATUS FROM DUAL) QRSLT ]]>
</rsq>
<Key>
<![CDATA[00010000000158]]>
</Key>
</VO>
<VO sig="1315216374468" qf="0" ut="0" da="1" It="1" Sz="25" St="0" im="1" Ex="1" Def="com.emerson.eth.adf.model.view.ErrorStatusBaseVO" Name="ErrorStatusBaseVO1">
<rsq>
<![CDATA[SELECT 'X' AS ERROR_STATUS FROM DUAL]]>
</rsq>
<Key>
<![CDATA[00010000000158]]>
</Key>
</VO>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.HeaderVO" Name="HeaderVO1"/>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.TradingPartnerBaseVO" Name="TradingPartnerBaseVO3"/>
<VO sig="1315216374468" qf="0" ut="0" da="1" It="1" Sz="25" St="0" im="1" Ex="1" Def="com.emerson.eth.adf.model.view.HeaderStatusBaseVO" Name="HeaderStatusBaseVO1">
<rsq>
<![CDATA[SELECT 'X' AS STATUS FROM DUAL]]>
</rsq>
<Key>
<![CDATA[00010000000158]]>
</Key>
</VO>
<VO sig="1315216374468" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.TradingPartnerBaseVO" Name="TradingPartnerBaseVO4"/>
<VO sig="1315216374468" qf="0" ut="0" da="1" It="1" Sz="25" St="0" im="1" Ex="1" Def="com.emerson.eth.adf.model.view.HeaderSourceFileNameBaseVO" Name="HeaderSourceFileNameBaseVO1">
<rsq>
<![CDATA[SELECT 'X' AS SOURCE_FILE_NAME FROM DUAL]]>
</rsq>
<Key>
<![CDATA[00010000000158]]>
</Key>
</VO>
<VO sig="1315216374468" qf="0" ut="0" da="1" It="1" Sz="25" St="0" im="1" Ex="1" Def="com.emerson.eth.adf.model.view.DependencyStatusBaseVO" Name="DependencyStatusBaseVO1">
<rsq>
<![CDATA[SELECT 'X' AS DEPENDENCY_STATUS FROM DUAL]]>
</rsq>
<Key>
<![CDATA[00010000000158]]>
</Key>
</VO>
<VO sig="1315216382156" vok="20" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.HeaderSourceFileNameLOVVO" Name="_LOCAL_VIEW_USAGE_com_emerson_eth_adf_model_view_HeaderSourceFileNameBaseVO_HeaderSourceFileNameLOVVO1"/>
<VO sig="1315216384812" vok="20" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.ReceiverTransStatusLOVVO" Name="_LOCAL_VIEW_USAGE_com_emerson_eth_adf_model_view_ReceiverTransStatusBaseVO_ReceiverTransStatusLOVVO1"/>
<VO sig="1315216385921" vok="20" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.HeaderStatusLOVVO" Name="_LOCAL_VIEW_USAGE_com_emerson_eth_adf_model_view_HeaderStatusBaseVO_HeaderStatusLOVVO1"/>
<VO sig="1315216387093" vok="20" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.ErrorStatusLOVVO" Name="_LOCAL_VIEW_USAGE_com_emerson_eth_adf_model_view_ErrorStatusBaseVO_ErrorStatusLOVVO1"/>
<VO sig="1315216388171" vok="20" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.DependencyStatusLOVVO" Name="_LOCAL_VIEW_USAGE_com_emerson_eth_adf_model_view_DependencyStatusBaseVO_DependencyStatusLOVVO1"/>
<VO sig="1315216393937" vok="20" qf="0" RS="0" Def="com.emerson.eth.adf.model.view.TransIDLovVO" Name="_LOCAL_VIEW_USAGE_com_emerson_eth_adf_model_view_TransIDBaseVO_TransIDLovVO1">
<VC n="__ImplicitViewCriteria__" d="true" c="0" bv="true" m="1" j="false">
<vcp>


</vcp>
<Row n="vcrow1" uc="0" cj="0">
<a i="0">

<iv i="0" b="0" sf="0"/>

</a>
<a i="1">

<iv i="0" b="0" sf="0"/>

</a>
</Row>
</VC>
<VC n="LOV_TransactionRecordId__lov__filterlist__vcr___" d="true" c="0" bv="true" m="3" j="false">
<Row n="LOV_TransactionRecordId__lov__filterlist__vcr___" uc="0" cj="0">
<a i="0">

<iv i="0" b="0" sf="0">
<![CDATA[40532]]>
</iv>

</a>
</Row>
</VC>
</VO>
</VO>
</AM>
<OraclePersistManager> <insert> [3569] **insert** id=1, parid=-1, collid=65951, keyArr.len=-1, cont.len=10035
<OraclePersistManager> <insert> [3570] stmt: insert into "PS_TXN" values (:1, :2, :3, :4, sysdate)
<OraclePersistManager> <commit> [3571] **commit** #pending ops=1
<ADFLogger> <end> Passivating Application Module
My question is does AM gets passivated on each request. This snapshot is not visible when Transaction behavior is set to 'No Controller Transaction'.
This type is snapshot is usually visible in case of 'No Controller Transaction', when AM Pooling is off or if AM Pooling is enabled then Failover support is on.
Is this OK for this snapshot to appear in JDev log or am I missing something?

this might be helpful, can u chk
The subtle use of task flow "No Controller Transaction" behavior
http://blogs.oracle.com/raghuyadav/entry/adf_taskflow_transaction_manag
http://andrejusb.blogspot.com/2010/01/demystifying-adf-bc-passivation-and.html

After upgrading to Lion and iTunes 10.4, cover flow not displaying song playing. Why not?

Since upgrading to Lion and iTunes 10.4, cover flow is not displaying the currently playing song. It will simply display the first cover in the playlist. Also, the screen saver starts during playback, unlike Snow Leopard. Any ideas on how to fix? I have already repaired disk and permissions but problem persists.

Thank you, thank you, thank you, thank you!
I tried restarting my mac and my iphone a bunch of times, reinstalling iTunes after deleting dozens of files, and it didn't help at all.
I re-installed X-Code (had to use Activity Monitor to kill iTunes Helper in the middle of the install) and then my iPhone synced again!

I've made a collection of songs in garageband, and have them now as .aif files in my itunes library under the same album name. How do I trim the beginnings and endings of the tracks so that my album flows better?

I "shared" the songs I made in garageband to itunes. Now the songs have some extra time of silence after they end, which makes the album i'm trying to put together feel more broken. I want to make the tracks flow perfectly through each other. I want to do it permanently, also, so that when i share the album it doesn't have space in it.
In the past I have imported all the songs into one garageband file and arranged them so they slightly overlap as a continuous track but then i didn't know how to split them back up so the tracks would still be actually separated. I can't find any information on this. I know I can sort of cut the songs in the "get info" options in itunes, but the song still lists as longer, itunes just makes it jump early.
Thanks

For the missing Artists on your iPod, make sure their tracks in iTunes are not marked as "Part of a compilation" in iTunes. You can do this by highlighting the track, right->clicking on them and choosing "Get Info" from the shortcut menu. When the window pops up, head over to the Info tab and make sure there is NO tick mark next to this option in the lower right hand corner. Lastly, sync the updated changes to your iPod.
B-rock

How to use a menu model with a dynamic region and a task flow parameter

I am using JDeveloper/ADF 11.1.2.1
I have a menu model that changes which task flow is displayed in a given dynamic region using a backing bean. That works fine. I would like to be able to pass parameters to that task flow based on which menu item is clicked. For example: i have a task flow which shows a page where input fields are used to filter a table. Depending on the value of the task flow parameter I want to change which input fields are displayed. So i will have multiple menu items which refer to the same task flow but have a different set of parameters. I have tried using request scope variables and setting them in the backing bean for the dynamic region which works until the query is submitted at which point the request scope has changed and the value is no longer available. I have tried a number of other 'creative' approaches but have not gotten anything to work. Anyone done this before? Or have an idea on how to solve it?

Frank,
I did a fair bit of digging based on your suggestions and some things I found in your Oracle Fusion Developer's Guide book and I came up with something that works really well. It is fairly elegant but requires code. It would be nice if something like a setPropertyListener could be rolled into the menu model. That would make my solution completely declarative.
Here is my solution:
My task flow requires a the value #{pageFlowScope.type} to be set. My application has a dynamic region that is changed on the fly using a menu model. The region uses a backing bean (mainRegionManagerBean) which is in the viewScope to manage what taskflow is shown in the region. There are multiple menu items in the menu model that point to the same task flow but pass different values to the #{pageFlowScope.type} parameter. So i wired the menu items up to different methods in the mainRegionManagerBean which set the value for me. See the relevant code below.
I would be very interested in the feedback from someone with more experience than I on my solution. Maybe there is a more elegant way...
In the backing bean there is a primary method that was created by generating a dynamic region link which sets the task flow id and then other methods which call it and set the relevant parameters. (JSFUtils is a helper class i wrote to centralize some common tasks):
public String shipmentTraceMasterTaskflow()
taskFlowId = "/WEB-INF/taskflow/master/shipmentTraceMasterTaskflow.xml#shipmentTraceMasterTaskflow";
JSFUtils.setValue("pageFlowScope.type", "");
return null;
public String shipmentTraceProNumber()
shipmentTraceMasterTaskflow();
JSFUtils.setValue("pageFlowScope.type", "pronumber");
return null;
public String shipmentTraceBOLNumber()
shipmentTraceMasterTaskflow();
JSFUtils.setValue("pageFlowScope.type", "bolnumber");
return null;
In the menu model (notice that these reference the different methods from above):
<itemNode id="itemNode_ProNumberTrace" label="ProNumber Trace" action="#{viewScope.mainRegionManagerBean.shipmentTraceProNumber}" focusViewId=""/>
<itemNode id="itemNode_BOLNumberTrace" label="BOL Number Trace" action="#{viewScope.mainRegionManagerBean.shipmentTraceBOLNumber}" focusViewId=""/>
On the page:
<af:region value="#{bindings.dynamicRegion1.regionModel}" id="r1"/>
In the pagedef:
<taskFlow id="dynamicRegion1" taskFlowId="${viewScope.mainRegionManagerBean.dynamicTaskFlowId}" activation="deferred" xmlns="http://xmlns.oracle.com/adf/controller/binding" Refresh="ifNeeded">
<parameters>
<parameter id="type" value="#{pageFlowScope.type}"/>
</parameters>
</taskFlow>
Edited by: Adam Stortz on Nov 22, 2011 11:10 AM

SD FLOW AND MM FLOW

Similar Messages

Maybe you are looking for