SD Mass update for customer in VA42

Hi all,
I wanna know if it's possible to make a mass update about the field MASSCONTHEAD_S-KUNNR (customer) in VA42, I tried with MASS transaction but at the end of the process appears a message telling that the data changes haven't been done. I tried modifying another header data field example the purchase order number in VA42 and it works.
What's the problem?
thx

As per the message, it seems, while doing MASS updation, you have not given any new value on top.
As you are aware, in MASS, after selecting the field and executed, a screen will appear wherein, on top you can see a tab "New Values". Below some documents will be displayed with existing values.
You have to input new value on top box and execute. Hope this is what you have tried. If not, try once again but again I can express based on the message number that you have not given any new value under the tab cited above.
thanks
G. Lakshmipathi

Similar Messages

Mass updates for Notification/Workorder status

Is there any way for Mass update of 'status' because orders and notifications need to be un-teco before updating planner groups and work centers? we are using Mass update for IW58,IW38 & IW29 and there is no option for STATUS update.

Thanks everyone for there response. I'll check the possiblity to add a button in IW28 for the closed notificaitons via any of the below BADIs:
BADI_EAM_RIQMEL20_FCODE_CUS1 : Implement Customer Function Code in Notification List
BADI_EAM_RIQMEL20_FCODE_SAP1 : Implement SAP Function Code in Notification List
and for Work Order:
BADI_EAM_RIAUFK20_FCODE_CUS1 :Implement Customer Function Code in Order List
BADI_EAM_RIAUFK20_FCODE_SAP1 :Implement SAP Function Code in Order List
In IW28 & IW58 there is option u201CPut in Processu201D in Notification Menu, but when I used this option it says u201CNotification is completed -> can only be displayedu201D. I wonder why this option is not working if Notification is completed.

Mass update on custom object..:Urgent

Hi All,
Is there any possible way to mass update on custom object as currently we can mass update only fro the following record types:Accounts,Activities (tasks, appointments),Contacts,Opportunities,Leads,Service Requests .Is there any other possible way so that we can mass update on custom object?
Thanks in advance,
Manish.

Manish,
I don't think this is currently possible from within CRM On Demand.
As an alternative, you could consider 2 options:
1. Use the DataLoader:
- Export all the Custom Object Record ID's (Required/User Key Fields) of the batch you would like to update. Once Exported, put them in a certain folder (This way you could keep track of all the updates you are making, make 2 sets (Original and Updated) Updated will contain the updated values file which you can re-import.
2. Use a .NET utility (We have implemented this for one of our clients to do a certain type of periodic update on a Custom Object)
Cheers!
Royston

Mass Update for the invoice reference (BSEG-REBZG)

Dear All ,
I need mass update for the invoice reference (BSEG-REBZG) . Is there any way to update it ?
Best Regards
Dash

HI,
Contact your ABAPer to Write BDC to update the Invoice reference.

Mass update for quotes?

Hi Friends,
How do we do the mass update for the Quotes as I did not fine the object for the quote in the MASS transaction code.
Can some body give me the procedure to do this.
Thanks
ANGKS

The Object name for Quotation is BUS2031
thanks
G. Lakshmipathi

Mass update for production and planned order MRP controller

Hi Gurus,
It's anyway possible to mass update MRP controller for Production orders and Planned orders. If any please provide me step by step process.
Thanks,
B.Deethya.

I feel You have changed the MRP controller in Material master and want to incorporate same in production order & plan order.
For Planned order Run MRP with delete and recreate mode, system will create a new plan order with MRP controller in Material master
For production order, Mass change is not possible, create a simple BDC or LSMW, And change the MRP controller

Mass Update for SMSY Server Routing Information

Hello,
We are on the Setup Service process and we got around 980 customer's servers conected to our productive solution manager trought trusted RFC's connections.
The problem is that we have to change our router public IP on all this systems due to a ISP change, and with that change we have to change also our public IP which are connected all our customers.
There is any standard way to mass update entris on SMSY->server->routing information ?
Thanks:
Luis Salvador

Hi Lluis,
If you just want to do a mass SMSY update, I'd suggest using a CATT script since you can avoid ABAP coding in that case. However I fear that in addition to updating SMSY, you will also need to update all your RFC destinations (possibly the BACK destinations on the satellite systems too). In this case you are stuck with ABAP coding!
Jon

MASS UPDATE FOR MATERIAL CODE DELETION

Dear all ,
Please provide the option for material code deletion in mass update .
Srithar K

Use T-code: MM17
Table-Fields:
MARA-LVORM (Client level)
MARC-LVORM (Plant level)
If its your first time, do a test run in sandbox.
Added
The above will flag the deletion flag. Then you will have to do a archival. To know the steps, just do a search in this forum or MM forum, you will get a step by step procedure.

Mass update for Pricing

Dear all,
The update of prices in VK12 is timeconsuming and we would like to find out if there is any other ways of doing mass-updates to prices. Do you know of any or any other way to update VK12 in a faster manner.
Please help
Thanks

Hi Moon,
Welcome on SDN.
You can do it in T-code VK32.
Hope it helps,
Regards,
MT

Master Datasource Update for custom fields

I have a standard master data source for 0customer, I need some custom fields that are enhanced in the same SoURCE TABLE KNA1. please let me know if
1. i can create the generic data source Z_DS_CUSTOMER for custom fields only from KNA1
2. Create transformation 1 to Map the data source Z_DS_CUSTOMER to Ocustomer to load the custom fields only and set no transformation for other standard fields
3. Create transformation 2 to Map the data source 0customer_attr to same Ocustomer to load the standard fields.set no transformation for other custom fields
4. Then Load via DTP Standard fields first via transformation 2
5. Then Load via DTP custom fields first via transformation 1
Will the above will work fine, and I can avoid any enhancement to master datasource 0customer_attr
please help me with solution.
Regards
Soniya
null

Hi all my dear friends,
I have seen the recommendation by my SAP collegue and Anil
1. infoobject as Target and
2. in between Standard DSO
1 transformations as you mentioned from 1 IS
3. Common Info source
2 transformations as you mentioned from 2DS
4. Datasources (2no's ) as source to splly to data to DSO
<b>Please tell me what is the need to do all the above why can't I feed directly the Infoobject with the below PLEASE tell me what will be the bad impact on design if I do the below</b>.since my client is asking<b> justification for build of each BI object</b>
1. infoobject as Target and
1 transformations as mentioned from 1 IS
2. Common Info source
2 transformations as mentioned from 2DS
3. Datasources (2no's ) as source to splly to data to DSO
I am not going for enhancement since it is not populating the datasource in rsa3. if you can correct that it would be great.
I have the same code for all custom fields none of them is working no records are pulled in RSA3 For custom field ZZSTAT.
Please help me with this
Thanks
Soniya Kapoor
*data: l_BIW_KNA1_S like BIW_KNA1_S
*case i_datasource.
*WHEN ' 0CUSTOMER_ATTR'.
*loop at C_t_data into l_BIW_KNA1_S
*l_tabix = sy-tabix.
*clear I_KNA1.
*select single * from KNA1 into i_KNA1 where kunnr = l_BIW_KNA1_S-kunnr.
*if sy-subrc = 0.
*l_BIW_KNA1-ZZSTAT = I_KNA1-ZINSTAT.
*modify C_t_data from l_BIW_KNA1 index l_tabix.
*endif.
*endloop.
*endcase.

Mass Update for Purchase Order & Sales Order Text

Hi,
Can be change the Purchase Order & Sales Order Text using MASS.
Regards,

Hi,
I am also surprised by the behaviour of the BDC.
This is first time when I am facing the problem since I have been using SAP.
I am able to update the PO Text manually , but BDC is giving the problem for only few Materials.
It does sound stupid, but this is the fact here with me.
Regards,
Edited by: PK on Nov 5, 2009 12:58 PM

Automatic updating for customer equipment card

Hi!
I am using SAP 8.8 PL12. How can I set the Customer Equipment Card to update automatically once there is changes on the DR or AR?

For Example: I have created a DR and cancelled it, I want my CEC to be updated based on this. Or if I change I cancelled the Invoice connected to it then created a new one, I want it to reflect on the CEC.
Is there a way to do that?
Thanks!

Mass updates for payment terms

Hi All
Advance thanks
Can any body explain
my client already posted invoices and now he wants to change the payment terms in the posted document.
nearly more than 20000 documents to be updated
whether can we change at a time using mass changes
if so, how can we use mass change?
Please let me know
Thanks
venu

First thing you will need to do, is to change the master data that made the payment terms to be incorrect in the first place this is done via t code MASS.
Secondly, you will need to create a recording of t code FB02 as you make the payment term change. I am presuming now that you can actually change the payment term field in FB02, if not you need to change your config.
****, Document, Line items, Document Change Rules, line Items.
Field is BSEG-ZTERM
Once you have your recording you will need to create a simple batch processing program that will be able to upload a file with the document numbers that need changing and make the changes as per the data you have.
Hope this is of some help, please awards points.

Mass update for message condition records

Hello all,
with Transaction NACE we maintained thousands of message condition records.
Now we have to change for all this message condition records the "Number of Messages" (Table NACH Field ANZAL).
Is there a mass change Option available or is there a function module we could use?
Thank you
Best regards
Manfred

Dear Manfred
i think you want to change All condition records of some condition type In NACE , you want to change Date and Time ex:
Am i right ?
Yes it is possible in NACE T.code level only
So here Give What is Your application like V2
Now click on condition record and Just go to change mode And give application V2 Example
after this change Date here it will applicable to all condition type what ever in your V2 Application and all condition type
Apart from This i thing some Function Module May be there but i cant recall
Please let me know
Thanks a lot

Mass Maintenence For custome fields from MM17

Hi all,
I Have added some custome fields in to material master and it is working fine,When i am trying to cahnge the values for these custome fields in MM17 it is not getting reflected in material master.
After cahnging the values if i save,it is giving me an Information-1090 : Messages have been issued: number MASS000924000003
In long text of this information i have.
Diagnosis-During inbound processing for the IDoc, messages have arisen while checking material data.
System Response-The system has filed these messages in the form of an application log with the number MASS000924000003.
Can you please let me know,How to solve this.
Thanks & Regards,
Anjana Rao

First read OSS [Note 576160 - MM17: BAdI implementation for append fields|https://service.sap.com/sap/support/notes/576160] and of course (and before) [Note 44410 - Integrating cust.-specific fields in matl master|https://service.sap.com/sap/support/notes/44410]
Regards,
Raymond

SD Mass update for customer in VA42

Similar Messages

Maybe you are looking for