SD pricing master data DATASOURCES (standard)

Hi
Can you pl give me the pricing master data DATASOURCES (standard)
Regards
Venkat

Hi Venkat,
Pricing master data std Extractor:
There is no standar extractor available. 2LIS_13_VDKON and 2LIS_13_VAKON gives conditions from Billing and Sales order respectively.
For Pricing Master data you have to create your own generic extractor using tables A5* tables (A501, A502 etc) and KONP.
Hope this helps,
Regards
CSM Reddy

Similar Messages

Pricing master data

I have a requirement where in I am interfacing the pricing condition records master data from the legacy system. We developed a program which is using BAPI BAPI BAPI_PRICES_CONDITIONS . This worked initially OK. however as we are testing more scenarios we are getting issues where in this BAPI does not create records correctly in the system for the same records with different validity dates.
Have anybody of you used /know any other technical solution to load the pricing master data in the system or can tell us more abt this BAPI . I read in one of the OSS notes wherein SAP says not to use this even though this is available which sounds weird to me
Any inputs would be appreciated

Hi venkat,
if I am not tatally wrong the LSMW can use an SAP standard program to upload the data into SAP (xk15). I've uploaded 2 Mio Records for the last customer in less than 12 hrs, so it is reasonably fast (although not lightspeed).
I can look up the program name on Monday, so theoretically a programmer should be able to upload using that program rather than the BAPI.
And yes, it is a shame to have some BAPI and to get the recommendation not to use it.
Cheers
Markus
Edited by: Markus Müller on Mar 14, 2008 8:23 PM

Is it possible to make a delta load for a Master data with Standard DS

I have a full load bringing huge data for master data with standard datasource.
I want to run a delta due to huge no. of records but when I create a new Infopackage it dont give a option for delta update.
Are delta loads specific to only standard or customized DS's or any other reason behind that ?

I kind of understand what you are asking about, but I am unclear as to how it pertains to our BO SDK.
You are wanting to find the differences between a large dataset and another large dataset.
I am not sure what an Infopackage is.
Are you using the BO Enterprise SDK or some other product?
Jason

SD Pricing master data

Hello Experts,
If anyone is aware of any standard extractor for SD Pricing Master Data,please help me out..
Regards,
BWTEAM

Hi,
There is no standar extractor available. 2LIS_13_VDKON and 2LIS_13_VAKON gives conditions from Billing and Sales order respectively.
For Pricing Master data you have to create your own generic extractor using tables A5* tables (A501, A502 etc) and KONP.
Jaya

Business content master data DataSources & change pointers

Hi,
Why general business content master data DataSources donu2019t have the behavior of the ones created for classification data with transaction CTBW. For the 1CL_* DataSources the corresponding message type RS* is created only when you run a delta initialization, and when you delete that initialization the change pointers for that message type become inactive. With general business content master data DataSources the change pointers are active all the time (even if you want to use those DataSources only for full updates). How can I, in BW, deactivate the change pointers for the DataSources Iu2019m not using?
Thanks!

I always assumed it was because BW hijacked the standard change pointers but in hindsight the change pointers are given a RS prefix so that must be wrong as the entries in BDPCV and BDCPS contain that prefix
But I assume you can run BD22 for the RS change pointers for non processed ones
Interesting question - I await other responses (my hunch is that they hijacked the BADI to write to the BD* tables and left the code in for RS* messages)

Can V find Master data datasource by having Transaction data datasource?

Hello All
I have a datasource in r/3 side by this can v find Master data datasource?
The Transaction datasource is 2lis_02_scl?
how to find Master datasource for this?
Many Thanks
balaji

AHP hello
Thanks for info given
Can v view same for customized datasources also?
is it possible?
so for datasource 2lis_11_vaitm,if v click on "Infosource Overview" v can view all the Infosource name,by this v can find our Master Datasource.?
so for ex.,I can c infosource 0CUST_GRP1,so this is the datasource for Master data from r/3 side?
Is it correct?
Many Thanks
balaji

Error in creating RSDS using transfer rules for master data datasources

Hi ,
when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
MY QUESTION IS HOW CAN WE SEE THE LOG? AND
PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
THANKS IN ADVANCE .

Hi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik

How to create generic master data datasource .

How to create generic master data datasource which utilises ALE change pointers for extraction of master data.

Hi,
For any master data lets say, Material Master, for this you need to create a view
based on your requirement by selecting one or more tables into your view and
keeping all the required fields in the view as viewfields and go to RS02 create
generic data source, select the view option as source and put the view, save and
activate, at the same time set the delta pointer as to whether Numericpointer/date/timestamp..this way you can create a generic DS then transfer the stru. and at the BW side replicate the source system..and so on..
Hope this helps..
Assign points if useful.
Need further info revert..
Cheers,
Pattan.

Knowing DataSource, Cube, Query, how to identify Master Data datasource?

Hi,
based on a research on FI-FM at http://help.sap.com/saphelp_nw70/helpdata/en/71/d3143cb1b8be00e10000000a114084/frameset.htm
I saw the flow as: first Query(based on cube 0FIFM_C01), the cube which gets data from 2 datasources (0FI_FM_1 & FI_FM_2) through 2 infosources: 0FI_FM_1 and FI_FM_2.
1. What do I need to install on BI to get this going and in which order?
2. In particular, knowing DataSource, Cube, Query do I figure out the Master Data data I need to get this query functional?
Once you know of the specific master data datasources what do I need to do to get this query functional?
Thanks

Dear Amanda,
Let's clarify your questions.
1.Install the cube and related stuff.
RSA1 -> Business content -> Choose " in data flow before" -> install the Cube
2. For the master data and related hierarchy.
RSA1 -> Find the InfoCube -> Right click, find a option such as "display data model". I am not sure about the exactly description because i am not in front of the SAP system.
you can find all the related InfoObject in the right panel.
It is good if you check all of those master data and load them daily. But it is a big job and sometimes it is not necessary. You can:
1) Clarify the business need. to konw which kinds of fields are "Must" for the end user anlaysis and make a list of that.
2) check the list and most of the master data will load by other moduels. for example, cost center, material, customer ... they are too common that you can expect they are in some process chain and loaded daily basis already.
3) load the master data in your list and no one load it before, or discuss with the ownder of process chain, if you need change the load frequency such as from weekly to daily.
Edited by: Brian Yang on Jul 12, 2009 8:54 PM

Master Data Datasources

Hi,
I would like to know from where do the Master Data Datasources get the data? I mean as all know, for TD we go the LBWE route where we activate the datasources etc... But where are these Master data datasources located I am not asking about RSA5...? What I want to know is, how the master data mechanism works in R/3 as we dont fillup the setup tables for these.It would be helpful if someone can explain the behavior of FI Datasources too as these datasources are not in LBWE either..
Please throw some light on this,
Thanks.

Hello,
Master data is data that remains unchanged over a long period of time, so this information is directly loaded either from the View or Data Base table hence we don't have the concept of filling up the setup tales.
For FI extraction Please refer:
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
You can find a document in this forum on COPA ,if you search this forum with "CO-PA".
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how%20to%20set%20up%20connection%20co-pa%20-%20extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how%20to%20set%20up%20connection%20co-pa%20-%20retraction.
Thanks
Geeta

Problem wiith Custom Master Data Datasource

Hi
I have just set up a datasource for a master data infoobject. The data source is based on a transparent table. But on execution, the Infopackage is returning 0 records in BW with Green Traffic Light. The table has data in it. Extractor Checker also returns data in R/3.
I think I am doing something wrong. Do I need to do anything different to set up a master data datasource in R/3.
Help would be truly appreciated and points will be awarded.
Thanks
Karen

Hi Karen
Are you getting 0 records with green request or in yellow. what error message you are getting.
Sometimes the extraction is not complete (yellow traffic light) hence suggest you to check the job log in source system. Please check the job log in source system using tcode SM37-> enter request number with wildcards * at both ends like Request number (you can get request number from monitor of this request)
Regards
Pradip

Dump in master data datasource

Hi all,
When I execute an extraction through a master data datasource (e.g. 0CUSTOMER:ATTR, 0VENDOR), I'm getting the following error:
Job cancelled in source system (RSM078)
The job in the source system is cancelled because a dump,
DBIF_RSQL_SQL_ERROR
Database error text........: "Cursor HCACHEDCSRN00445 not open. MSGID=
Job=067810/PRE00/WP27"
Internal call code.........: "\[RSQL/FTCH/KNA1 ]"
I'm running on BW 7.01 SP 07
Regards

Hi Raghavendra, thanks for your reply
Here is the content of the dump
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          19.11.2010 11:19:45
Short text
SQL error in the database when accessing a table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "Cursor HCACHEDCSRN00339 not open. MSGID=
Job=067809/PRE00/WP26"
Internal call code.........: "[RSQL/FTCH/LFA1 ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPLWYSE" or "LWYSEF02"
"LFA1_DATEN_LESEN_CURSOR"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"LFA1_DATEN_LESEN_CURSOR" "(FORM)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 701
Application server... "ERPPRD"
Network address...... "10.16.40.23"
Operating system..... "OS400"
Release.............. "6.1"
Hardware type........ "00100007B87A"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 26
Shortdump setting.... "full"
Database server... "ERPPRD"
Database type..... "DB400"
Database name..... "PRE"
Database user ID.. "R3PREDATA"
Terminal.......... " "
Char.set.... "C"
SAP kernel....... 701
created (date)... "May 23 2010 21:51:44"
create on........ "AIX 2 5 00CB5A5B4C00 (IBM iSeries with OS400)"
Database version. "DB4_53"
Patch level. 94
Patch text.. " "
Database............. "V5R3, V5R4, V6R1, V7R1"
SAP database version. 701
Operating system..... "OS400 3 5, OS400 4 5, OS400 1 6, OS400 1 7"
Memory consumption
Roll.... 16192
EM...... 29328936
Heap.... 0
Page.... 32768
MM Used. 2610000
MM Free. 18335840
User and Transaction
Client.............. 300
User................ "ALEREMOTE"
Language key........ "S"
Transaction......... " "
Transactions ID..... "4CE5FF2B4DA21FDDE10080030A102817"
Program............. "SAPLWYSE"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "SAPLWYSE" - in
"LFA1_DATEN_LESEN_CURSOR".
The main program was "SBIE0001 ".
In the source code you have the termination point in line 620
of the (Include) program "LWYSEF02".
The program "SAPLWYSE" was started as a background job.
Job Name....... "BIREQU_4JVYLR3Y1HW25Z7MZZK6TJRQ1"
Job Initiator.. "ALEREMOTE"
Job Number..... 11194000
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "LFA1_DATEN_LESEN_CURSOR" "(FORM)", but it was neither handled
locally nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLWYSE "; its source code begins in line
616 of the (Include program "LWYSEF02 ".

Master data datasource for the point of delivery and installation.

Hi,
Can any one help me with the Master data datasource for the point of delivery and installation.
Currently i am using ouc_instfacts for installation facts.
With Thanks& Regards,
Shakthi.

Hi Shakti,
I guess you are asking for assignment of installation to POD (table euiinstln)?
Then you should check 0UC_PODINST_ATTR.
Best regards
Harald

Master data datasource

Hi,
i have an ifocube which contains some characteristics which have master data. if it contains attribute which again has characteristics having master data , do i need to activate the master data datasource of attribute characteristics along with characteristics of the cube or only the characteristics of the cube, which shall take care of its attribute master data??
Hope im clear on my question
Thanks
Prashant

to make it more clear i have a cube Annual Values 0FIAA_C01 which has characteristics
Asset Sub-number 0ASSET
Main Asset Number 0ASSET_MAIN
Company code 0COMP_CODE
Depreciation area real or derived 0DEPRAREA
Depreciation Area Real or Derived 0ASSET_AFAB
these characteristics have master data with attribute for eg Asset Sub-number 0ASSET having attibute 0COSTCENTER which itself has master data. and othe such characteristics also
so now to load this infocube i will have to load masterdata datasource only for initial 5 characteristics only or for the attribute 0COSTCENTER
any suggestion??
hope im clear
Thanks
Prashant

MM Master Data Datasources

I need to get storage bin master data into BI, but could not find any master data datasources in BI Content. I could find two infoobjects 1) 0STGE_BIN (in MM Area) and 2) 0STRGE_BIN (in SD Area). I think the one from MM area is appropriate, when I right click this ds and 'display dataflow' I can see data is flowing into this object from 0stge_bin_attr and 0stge_bin_text.
Please answer: a) if there is any master data datasources for this object? b) is there anything to activate from SPRO to get application specific bi content datasources?
Thanks in advance.

There is no Master Data DataSources for these and you would therefore have to create a generic DataSource for i,t in RSO2, from the source TNNNX table(s).

SD pricing master data DATASOURCES (standard)

Similar Messages

Maybe you are looking for