SD reader does not recognise .mov files

i am trying to import .mov videos from an SD card reader, the card reader is recognising the photos on the card but is not displaying the videos for import... Any suggestions ??

Guys,
I appreciate anyone who wanted to help me with the described issue. However, all the recommendations were just a scratch of bushes...
I decided to review more forums that discuss about Ricoh made flash media controller drivers and I hit the nail...
Thanks to a fellow who experienced the same problem but with other brand of laptop that uses Ricoh drivers.
I checked his recommendation and bingo - SD reader in T61 machine recognizes SDHC 8 GB my cards and everything works fine.
Before leading everyone to that site, allowing to download and install different version of Ricoh
flash media controller drivers, I will share my conclusion about Lenovo product. They integrated 3rd party drivers ( Ricoh ) into ThinkPad without recognizing or checking that their latest version 3.54.02 are  good probably for MS, XD-picture and  for MMC cards but does not work with SD ( however the device controller is named SD/MMC  controller ).
The site where you may download the proper executable application file is http://asusg1s.wikidot.com/forum/t-9849
The file name is E1007029. I checked it, it does  not contain any viruses. 
This folder contains eleven files with a setup executable file. After setup completion you will find under IDE ATA/ATAPI Controllers new two devices named  Ricoh SD Host Controller and Ricoh Memory Stick Controller ( I left undeleted previous
installed controllers as well - Ricoh SD/MMC Host Controller and Ricoh xD-picture Controller ).
The "new" installed flash media contoller drivers are Ricoh R5C841/842 version 2.43.02 and are for Windows XP environment. So this case can be closed.

Similar Messages

  • AP3 does not recognise movie files from Sony HD camcorder

    I tried to import footage from a new Sony HDD camcorder, Aperture uploaded the stills ok but couldn't upload the movies with an error message saying 'Unknow File Format'.
    However iPhoto uploaded the movies no problem. The file format is .MPG
    If anyone can offer any advice on what I need to change to upload MPG format that would be most appreciated. Thanks.

    Are you sure the format is .MPG -- Sony HD camcorders are typically outputting AVCHD files, which Aperture does not read? Nevertheless, not sure if .MPG is supported either.
    f you open Aperture Help and search on Video, you find the following:
    File Formats You Can Import into the Library
    Aperture supports most image, audio, and video file formats captured by digital cameras. An example of the file types and formats that can be imported into your Aperture library are:
    • GIF
    • JPEG
    • JPEG2000
    • PNG
    • PSD (8- and 16-bit)
    • TIFF (8- and 16-bit)
    • BMP
    • DNG
    • RAW files from a variety of supported digital cameras
    • AIF
    • WAV
    • MOV
    Ernie

  • My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think.

    My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think but it is linked as a plug in with chrome and IE.  How can I get my windows to recognise the .swf files to play them.

    The downloaded file is the projector, not an installer; you need to make the file association manually:
    move the downloaded exe file to a location you can remember, e.g. C:\Windows\SysWOW64\Macromed\Flash
    right-click on a swf file and select Open with > Choose default program
    navigate to the folder you saved the player and select flashplayer_13_sa.exe

  • Elements does not recognise prel file

    I saved a project to DVD (photos with background music) Elements does not recognise "prel" file when trying to reload project. How do i open file in Premiere Elements 10

    Chris (Herbie53)
    There was no Premiere Elements 5 and 6. The version numbers went 1, 2, 3, 4, 7, 8, 9, 10, 11, 12 (latest) So you probably use Premiere Elements 4 or maybe 7 on probably Windows 32 bit XP or Vista.
    Case 1. (Here we assume that you have the project.prel file (project) saved to a DVD disc as data disc.)
    Even if you had saved that older Premiere Elements project file (project.prel) along with copies of the media that went into it, it is still questionable whether that old project.prel could be opened in Premiere Elements 12. But, assuming that the media was still connected to it (which it probably is not), you could try by right clicking the project.prel file and selecting Open With Premiere Elements 12. Have you gone that route, and the project would not open or you were greeted by "Where is the file...?" messages.
    Case 2. (Here we assume that, when you were using the the older program, you took the project Timeline to DVD-VIDEO on DVD disc...this is not the project.prel file, but an export of it.)
    In this situation, if you put your DVD disc in the burner tray and explored it, you would see two folders, one named OpenDVD and another named VIDEO_TS. This is your best case scenario. If this is the case.....
    a. Put your DVD disc in the burner tray.
    b. Open Premiere Elements 12 Expert workspace. Go to File Menu/New/Project and Change Settings.
    In Change Settings, set the project preset for either NTSC DV Standard or NTSC DV Widescreen. For now, we will assume NTSC DV Standard. Then, before you exit that area, in the last dialog that you see (new project dialog), make sure you have a check mark next to "Force Selected Project Setting on This Project".
    c. Next, back in the Premiere Elements 12 Expert workspace, use Add Media/DVD Camera or Computer Drive/Video Importer where you will select video files from the VIDEO_TS Folder to bring into the Premiere Elements 12 project. You will have to redo the menu in 12. The video files that you want from the VIDEO_TS Folder typically start with VTS_01_1.VOB and continue in series which can be detailed later.
    Goal right now is to sort through the details so that we are in sync on what you have in order to enable us to be confident about the troubleshooting strategy.
    We will be watching for your comments and results.
    Thanks.
    ATR
    Add On.....The classical recommendation has always been to complete a project in the program in which it was created. But let us see what can be done here.

  • Aperture does not recognise TIF files from Nikon CoolScan

    The TIF files from my Coolscan are good in every other application, but Aperture does not recognise them. I've tried re-saving the TIFs as JPG and PDS but Aperture doesn't recognise any file generated from the TIF. Maybe it's something to do with the scanner driver? Any ideas how to load these files into Aperture?

    You might check the color space that is assigned to the files. If you are using Nikon Scan software to manage your CoolScan, there is a preference for setting the color space of the saved file. FWIW, Nikon CoolScan .nef files are a 'raw' file, not camera raw, that was/is a Nikon proprietary format for their scans. If you use the Nikon Scan for image editing, the edits are non-destructive in saved files and can be adjusted by re-opening the file in NS. Adobe first made editing camera raw available in early 2003 and the Nikon format preceded that. Nikon's camera raw format also has the .nef extension, but is not the same as the CoolScan .nef-- really confusing. I suggested checking the color space, because Nikon has different internal names for Adobe RGB(1988) as well as their own Wide Gamut space.
    All said, I've not had a problem opening .tif scan files in Aperture.

  • Facebook does not recognise iMovie file type

    Hi all. I have successfully downloaded videos to Facebook this year, but have just upgraded to Lion from Snow Leopard and something appears to have changed.
    When I try to "Share" onto Facebook, the Facebook interface does not recognise the movie type. I also notice that instead of each project showing in the "Movie Events" file as a thumbnail of the opening frame, it sits as an iMovie Icon, albeit with the project name.
    I have successfully uploaded to Vimeo, so my question is: has something changed in iMovie after the upgrade to make the "project" indigestable to Facebook?

    GR-Blitz,
    You can see a few ways of doing it in this thread:
    https://forums.adobe.com/message/6474423#6474423

  • Apple tv does not recognise movies in itunes library

    Homesharing works. My issue is that apple tv does not recognise all movies in my library, particularly reference movies (created them through quicktime pro to overcome itunes not playing AVI issue). Can anybody help?

    They may not be compatible.
    Supported formats
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • IDVD version 7.0.3 (1110) does not support .mov files???

    After the last software update (01.26.09) I can't open my projects made with iDVD 7.0.2 just some days before the update. While opening an old project I receive system message about lost video files. When I try to drag this files manually, I receive message: Unsupported File Type: Broken Reference Movie in: 'name of my .mov file. Meanwhile, the files are on the same place as before.
    Is somebody here who have met this problem? What to do? How to come back to previous iDVD version?

    Yes iDvd does still supports .mov
    However, it's a QT Reference movie you are dealing with and anytime you move this file from it's original location you'll confuse iDvd. The solution is to re-establish the link so that it's no longer a broken link.
    iDvd should give the option via a dialog box to find that particular asset before it proceeds any futher. Is it not offering you this option?

  • Does not play mov file in fcp x smothlly

    few days back i shoot with xdcam, but i didnot know that time i need all the files to do editing in fcpx so i delet all support files n just copy the main video file which is in mp4 fermat.
    then after i try to import that file in fcp x which doesnot work n i convert that file into mov format. then after i could manage to import the file in fcp x but now when i try to play thoes clips, it doesnot play well. its like frame drop or like stop sec by sec i dont know what happen?
    plz somebody canhelp me with this. im really tried with this problume

    innocentius wrote:
    Does he not need tools like XDCAM transfer (or XDCAM browser) from Sony ?
    midnightraj said he had converted the mp4 movie to mov, and that this mov file played (albeit dropping frames) inside FCP X, so my perspective was in working with content thas was already inside FCP X.
    I have no specific knowledge of xdcam, and it may well be that using the xdcam transfer tool is the best choice.

  • IPhoto 9.6 Does Not Recognize .MOV files!!! - HELP!

    Hi - After updating iPhoto to 9.6 with Yosemite, iPhoto no longer recognizes .mov files and cannot import them.  What can I do?!?

    Try the fix posted by cghrismartinphd in this topic:
    chrismartinphd
    Sep 20, 2014 9:39 AM
    Re: iphoto won’t import mov video
    in response to léonie
    I just read the thread to which léonie pointed. (Thanks!)
    In System>Library>Caches, I had a file named "com.apple.xpchelper.cache". That file showed a modification date of yesterday -- I don't know what changes this file. Quite likely it was the install of 10.9.5 that I did yesterday.
    Now, I was lucky enough to have a clone of my system from 3-4 days ago. I copied the older (cloned) version of this file, which itself had a modification date of about a month ago - to the working system. (I first renamed the current "com.apple.xpchelper.cache" to be safe.)
    Then, I restarted ... and everything works like before! All movies play, and I can import.
    I am not sure at all why this happened or why the above has fixed things for me, but it seems it has!
    I am very happy to have fixed this issue without having to do a system recovery, which always has hitches here and there, and takes a decent chunk of time no matter how "backed up" you are.

  • Elements 7 does not recognise RAW files from my new camera

    Have recently bought a new camera (Canon EOS 60d), which is an import.  Whilst I can process Jpegs in Elements the RAW files are not recognised.  Help

    PSE7 is three years old, and camera makers are constantly changing the formats of the RAW images they use.  There's no way for PSE7 to open those new RAW files, beause the latest version of Adobe Camera RAW is incompatible.
    You'll have to use the Adobe DNG converter to convert the RAW files and then open the DNG files in PSE:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5375
    Or you can purchase PSE10.
    Ken

  • Acrobat Reader does not recognise my printer

    Hello,
    When I attempt to print a pdf document from adobe reader, my printer is not listed in the dropdown list of available printers.  I am therefore unable to print anything.  This issue only occurs with acrobat reader, all other windows applications recognise the printer and print fine.  The printer is connected via wifi.
    I have already tried uninstalling and reinstalling the printer and the drivers, as well as acrobat reader.  I have restarted my computer.  The issue still persists.
    My system information is as follows:
    Windows 8 64 bit pc
    Epson WF-7515 with the latest drivers
    Acrobat reader version 11.0.0
    Any solutions are much appreciated
    Regards

    I have the same problem. My Brother HL-1430 over USB connected to my Airport Express works perfectly. But via Time Capsule no way. I did all the deletion, re-install etc., but no success. I think the Time Capsule has still some problems to solve. What I did now:
    I have connected my Airport Express via Ethernet (bridge mode) to my Time Capsule. I have my stereo and USB printer connected to Airport Express. My TC connects to the Internet. In addition I have an additional USB HD connected to TC for TC archiving and file sharing.
    My MacBook connects to TC only. Now all works fine. I can use everything together at the same time (Internet, printing, music streaming, TimeMachine) without even having dropping bits when streaming sound in parallel.
    Here I must say, that I would have long expected Apple to finally include Air Tunes into its base stations and TC. It's a bit of a joke that you still need to buy an additional Airport Express just to stream your music. Here marketing and product positioning at Apple goes too far and harms the concept of an easy and integrated solution.

  • Urgent: Adobe Reader does not attach pdf-files to standard e-mail software any more!

    Hello,
    Situation:
    Windows XP Pro; SP3
    Office 97
    Thunderbird
    Adobe Acrobat Reader
    When I want to attach a pdf-file directly from Adobe Reader to a new Thunderbird e-mail it starts ALL OF A SUDDEN the setup-assistant for Microsoft Exchange / Outlook! Why? I have no clue (:
    It worked fine until 3 days ago.
    Thunderbird is the standard e-mail software and it works for example fine if I click on an address in the internet. Thunderbird opens a new mail.
    I tried to uninstall Adobe Reader and installed it again (restart computer / ccleaner) but this failure still occurs!
    Does anybody know what to do please? It is really urgent because I need that function all the time... (:
    By the way: I do not work with Outlook; it is not configured.
    Thank you very much!

    > ALL OF A SUDDEN...
    What happened between when it worked correctly 3 days ago, and the time it stopped working as expected?
    Check Control Panel | Internet Options | tab Programs; to what is the E-mail option set?
    If it is already correctly showing Thunderbird, then try a System Restore to a date when it still worked correctly.

  • I exported my settings from Illustrator CC. I then tried to import into Illustrator CC 2014. It says it does not recognise the file type ?!? What do I do to migrate my settings?

    I have read through posts on this subject. I have looked as this to be the solution to have the same workspace that I had in the CC version, in the latest CC 2014 version. It hasn't worked.
    I'm now sad =(

    GR-Blitz,
    You can see a few ways of doing it in this thread:
    https://forums.adobe.com/message/6474423#6474423

  • Adobe Reader does not recognize file name (filename10.5.11.pdf) but does in Adobe Standard 9.  Why?

    I post documents to our Intranet site and found out recently that Adobe Reader does not recognize certain file names in PDF files.  For instance,  when trying to open a PDF file with the name
    filename10.5.11.pdf  in Adobe Reader, the web browser will not open the PDF and the display is blank.   When I'm using another computer with Adobe Standard 9, I do not have a problem opening the file.
    I would like to know if anyone else has had a similar issue and why Reader will not recognize the file name and Standard does.

    The version is Adobe Reader 10.1.0    I will request the latest version
    and let you know if that fixes the problem
    Actually I had changed the name of the file so our associates could access
    the file (changed the  .  to a hyphen)  It still made me wonder why Reader
    wouldn't open it at that time.
    Thanks again for you assistance and I will let you know if this resolves
    the  issue.
    Regards,
    Susan
    From:   Ankit_Jain <[email protected]>
    To:     SusanPleso <[email protected]>
    Date:   10/19/2011 12:56 AM
    Subject:        Adobe Reader does not recognize file name
    (filename10.5.11.pdf) but does in Adobe Standard 9.  Why?
    Re: Adobe Reader does not recognize file name (filename10.5.11.pdf) but
    does in Adobe Standard 9. Why?
    created by Ankit_Jain in Adobe Reader - View the full discussion
    Hi Susan,
    Thanks for providing the information.
    Could you also let me know what is the exact version of Adobe Reader on
    your system. You can check the same y clicking on Help > About Adobe
    Reader X.
    In case its not 10.1.1, please try updating to the latest version and see
    if the problem persists.
    Also, does any other PDF with a different filename open in Internet
    Explorer correctly?
    Thanks
    Ankit
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/3979020#3979020]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/3979020#3979020]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Reader by email or at Adobe Forums
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for