Sd reader doesn't show up on device manager after windows 7 and river download

I just installed 64 Bit windows 7 and the HP drivers . now the SD reader doesn't work or show up on the device manager

Hi Eddier,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you are facing the issue with Web-camera on ThinkPad E535.
Please go to the below link where the same issue was posted in our forum and the issue has been resolve.
The link is for different model but it is with same issue, so I suggest you to perform the troubleshooting steps from the link.
Integrated Camera is not detecting in Device Manager
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

W520 Smart Card reader does not show up in Device Manager

W520 Smart Card reader does not show up in Device Manager.
It was working before and now nothing. Nothing happens when SD card plugges in.
Could my smart card reader stop working or is this a configuration issue?
Any thoughts?
thanks
Ian

Hi Ian,
Welcome to the community, and thanks for the post.
The issue is related with software, to resolve this you need to re-install the card reader driver from the below mentioned web link.
http://support.lenovo.com/en_SG/downloads/default.page?
After that check if the issue get resolved.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

T61p - IEEE 1394 (Firewire) port does not show up in device manager in Windows 7 x64

I have a T61p. On the front, in the left corner, right next to the wireless on/off switch, is a IEEE 1394 (Firewire) port. However, if I plug anything into it, it's not recognized by Windows, and if I go into the device manager in Windows, there is no IEEE 1394 host manager or ports or anything listed there.
I have rebooted and gone into the BIOS, and I don't see anything in there about 1394 either. Is the port there, but the hardwire inside is missing? Do I need to enable it somehow?

Let me clarify that. I have something in the device manager called "SD Host Adapters", and under that "SDA Standard Compliant SD Host Controller". That thing has a Microsoft driver.
However, under "IDE ATA/ATAPI contollers", I do see "Ricoh Memory Stick Contoller", "Ricoh SD/MMC Host Contoller", and "Ricoh xD-Picture Card Contoller".
I also have "PCMCIA adapters" that has "Ricoh R/RL/5C476(II) or Compatible CardBus Contoller".
So, it would seem I have the right drivers for the card reader, I'm just missing anything for the IEEE 1394 contoller...

Microphone doesn't appear in the Device Manager in Windows 7

I'm using Windows 7 64 Bit OS on my MacBook Pro, clean installation, not based on Bootcamp, no MAC OS installed (required by our company otherwise I can't access corp network). Now my problem is that the speakers are working properly, but I can't use the internal microphone as it doesn't show up in the device manager. Cirrus Logic CS4206A (AB28) latest driver is installed. External headset with microphone works fine. Any help welcome, thanks in advance.

I disabled my microphone in Bootcamp Win7 Ultimate 64B and now it is completly gone. I used the Windows support CD I made and re-installed the 64B Cirrius drivers but the microphone is no where to be found also missing in device manager as well as Control Panel Audio.
Help.

Devices Not Showing Up in Device Manager After WinXP Install

I installed Windows XP Professional CD after re-formatting and partitioning the hard drive in my ThinkPad T42 (2378-FVU).
After finishing the install and running Windows Update for an eternity, Device Manager still can't detect several items. (I was able to get my wireless networking to work after installing a driver from Intel.) These are the "Other Devices" in yellow listed in Device Manager:
- Ethernet Controller
- PCI Modem
- Video Controller (VGA Compatible)
Yes, I dutifully downloaded and installed these and other device drivers from Lenovo's website.
Why doesn't WinXP SP3 detect my devices?!?
I saw other posts about a WinXP Pro install on T41 Thinkpads with the same problem. The recommended solution was to install the device drivers "twice." I'm sorry, but I don't understand what that means, twice? The solution also seemed to indicate that the install is supposed to be done at two different locations. But, only one path is listed in the solution and my drivers are installed in the solutions' paths.
Hopefully, someone can be more explicit about how to do the driver installations twice.
Thank you in advance for your help.
- nello
Solved!
Go to Solution.

Hi and welcome to the forum!
The other path is C:\DRIVERS\WIN....the first setup tells you the exact location if you pay attention.
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

U330 wireless not showing up in device manager after reinstalling OS

hi,
my wireless doesn't work anymore. I've made sure the switch is on, and have pressed fn+F5. I've installed the drivers from here: http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_show_279.html
i've tried to search for new hardware, deleted all the hardware that wasn't installed correctly and rebooted. I also rebooted and pressed f2 to get to set up and checked under advanced that wireless was enabled.
For some reason my computer doesn't know that my wireless card exists.
what next? any suggestions? wireless card worked fine before restore so my guess is it's not a hardware problem, though truth be told i don't know how to check the hardware so i have no real way of knowing if that is it.
thank you!
oh - my OS is Vista 32 bit.

Was the reinstall a Restore, or installed from a Windows disk?
Some things to check, if you have not already.
Is the wlan driver installed? Look in Uninstall a Program
section of Control panel for the Intel driver.
Does the driver install in a "two step process"?
Some older drivers extract to a folder on your hard drive,
usually C:\drivers\* and then you must run the Setup
file from there.
The way to check if it is hardware is install a different card,
not always a simple thing to do if you don't have spare cards
laying around!

Connected a flash drive but it doesn't show up in devices

I downloaded songs to my flash drive and i want to put them into i tunes but it doesn't show up in devices do I need to look somewhere else. Thanks

Your flash drive won't show up in iTunes, look for it in Windows Explorer, it will probably be labelled Removable Drive.

I want to set up my iphone to sync with my macbook but when I plug it in via USB my iphone doesn't show up under devices in itunes even though it is plugged in correctly and is charging through my computer. How do I get it to show up?

I want to set up my iphone to sync with my macbook but when I plug it in via USB my iphone doesn't show up under devices in itunes even though it is plugged in correctly and is charging through my computer. How do I get it to show up? I've tried restarting my computer.

If your iPhone does not appear under Devices in iTunes after you connect it to your Mac, refer to the troubleshooting suggestions here:
http://support.apple.com/kb/ts1591

Adobe Reader doesn't show correct version.

Adobe Reader doesn't show correct version. How can i check if the current version (10.2.3) is installed?

Good day,
The current version of Adobe Reader is 10.1.3. You can check to see if you have this version installed by choosing Help > About Adobe Reader (Windows) or Adobe Reader > About Adobe Reader (Mac).
Kind regards,
David

Dv2915nr cd/dvd drive doesn't recognize when disk in. drive doesnt show up in device manager.

dv2915nr cd/dvd drive doesn't recognize when disk in. drive doesnt show up in device manager.

Hi,
Here's one option you could try as it will give a good indication whether the problem is with Windows or a Hardware issue with the optical drive itself.
Create a bootable Ubuntu CD
The Ubuntu CD you create should run as you boot the notebook ( ie outside of Windows operating system ), so if this will not run, the problem is almost certainly a Hardware issue with the DVD drive
On another PC, follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run from the CD. The 'try it' option does not need to install on the Hard Drive, it just runs from the CD.
http://www.ubuntu.com/desktop/get-ubuntu/download
Let me know if this will run.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My wireless adapter is not showing in my device manager under network adaptors

I have a Pavilion, model p6210f with Windows 7
I have used it for 2 years with an ethernet cable and now I need it to go wireless, however, no wireless adpater is showing in the device manager under network adaptors, only showing the LAN.
Checking the specifications for this model at the hp website, it should have a 56K Win Modem.
Don't know what to do except go buy a USB Wireless adaptor, any ideas?
Called tech support, but I was given no assistance.

Hi:
Below is the link to the product specs for your PC.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01852858&tmp_task=prodinfoCategory&cc=us&dlc=en...
The PC does not come with wireless networking capability - only a wired ethernet adapter and a dial up modem.
The easiest thing to do is to purchase and external USB wireless network adapter.
Below is a link which will give you plenty of choices to consider. Look at the reviews and buy one that best suits your needs. You will of course, also need a wireless networking router.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&N=100006519&isNodeI...

Western digital 3tb 2nd hard drive shows up in device manager but not in disk manger.

Internal wd 30eurs drive shows up in device manager but not disk manager. Any suggestions on how to format this drive and partition it. I am running windows 7 64bit os

Open the Windows Control Panel and then select Device Manager which allows you to initialize and format new hard drives installed in your system.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

MS-1762 with new 770M not showing up in Device Manager

Recently I tried to install a 765M into my Medion Erazer X7817, which is an MS-1762 barebone. Since that didn't work out in the end I returned the item and bought a green 770M which was said to be compatible with MSI (1762 as well as other boards) and Alienware.
The card came today and I inserted the new card into my laptop. There was no difference in terms of startup - no resolution change, nothing. Originally, if there was no card or a dead card inside the laptop the fan would spin up to 100% a few minute after startup. But after I installed the 770M the fan is quiet and normal, HOWEVER the card isn't showing up in Device Manager. It also isn't showing up in the NVflash utility so a vBIOS flash is out of the question for now. I have reseated the GPU and I double-checked to make sure it was in correctly.
Since the card is newer than both the 670M (the card which came with the laptop when I first bought it, which has died) and the 765M (the one I bought but didn't work in the end as it was for Clevo and Alienware only) would a BIOS update make the card visible somehow? Obviously I cannot install the drivers, only the Intel HD Graphics 4000 is showing up, and that has the latest drivers.
Any suggestions? This is a MS-1762 barebone, stock BIOS:
American Megatrends Inc.
Version E1762IM7.107
Date 25/05/2012

Quote from: Svet on 03-November-14, 03:47:32
nope this bios is not for your notebook
because its change .1xx ==> 7.xx , ie: Win7 ==> Win8
and because its change Medion to Retail
double cross flashing
if you flash it, it may brick your notebook
or if its not bricked it can cause a side effects like brightness wifi are not working and to such
with no option to flash back to your original one
I realized. I could have used the /x parameter in afudos to force it, but that could've made things worse.
Which bios should I use then? Does unlocking my current bios allow compatablity for 7xxM cards?

I have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

i have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

I updated my iOS to 7 yesterday. But my music app doesn't show the 'Radio' button as the online videos and Apple website claims. What could be the reason and how to fix it. All other apps, swipe up/down seem to be working fine.

I updated my iOS to 7 yesterday. But my music app doesn't show the 'Radio' button as the online videos and Apple website claims. What could be the reason and how to fix it. All other apps, swipe up/down seem to be working fine.

Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

Sd reader doesn't show up on device manager after windows 7 and river download

Similar Messages

Maybe you are looking for