SD_SHIPMENTS_SAVE for IS-Oil
Hi experts,
In normal Shipment we have SD_SHIPMENTS_SAVE.
I would like to ask for your advice that is there any function module
similar to SD_SHIPMENTS_SAVE but can process saving from external application
for TD Shipments ?
Kindly advise.
Hi,
Check this FM OIG_F_SHPMNT_MAP_AND_SAVE.
with regards,
Vamsi
Similar Messages
-
Organization Structure for Petro-oil business
Hi experts,
I'm a new consultant, and I'm implementing for a Oil & Gas Project. I want to ask you a recommendation about the solution for Organization structure.
This business sell some kind of good:
1) Hydro: mogas, diezel, mazut, kerosense...
2) Non-Hydro: cement, Iron, gas, lubricant...
I should use two org. structure for each kind, or just unique structure. Because each kind is controlled a different method, so I suggest use two org. structure, but its difficult for reporting.
Plz help me.Hi Kumar,
Sorry for late response: but the answer is no, only one structure for each country.
Dr. Berg -
Blue Print Document for IS OIL IMPLEMENTATION
Please provide me Blue Print Document for IS OIL Implementation .
so that i can use it as a Reference .chk the template .. it may help
OILY
http://help.sap.com/bp_miningv1472/index.htm
SERCH FOR DOWN STREAM -
Link for IS-OIL in 7.2 version of SAP
Hi experts,
I am searching for the link for IS-OIL in 7.2 version of SAP ? Can anybody tell me to find the link ?
Regards,
ShaktiHello Clinker,
Still SAPGUI 64 bit version not available. You can use SAPGUI 32 bit version in 64bit OS. It will work.
Best Regards, Ashwini -
Active business functions for IS-OIL Downstream
Dear all,
I have system NW701/ECC6, and upgrade EhP4.
Now I want to active business functions for Downstream, in tcode swf5, I select Business functions set OIL&GAS, I found a lot of business functions:
BUSINESS_FUNCTION_BASIS_COM Business Function Basis (COM)
COMMODITY_MGMT_&_BULK_LOGISTIC Commodity Management and Bulk Logistics
COMM_MGMT&BULK_LOG_1 Commodity Management and Bulk Transports
ISR_RETAILSYSTEM Other Enhancements for SAP Retail
LOG_COMMODITY_TRANSPORT_MGMT_4 Commodity Management and Bulk Transports 2
OIL_PRODUCTION Upstream Production Management
OIL_REVENUE_ACCOUNTING Upstream Revenue Accounting
REMOTE_LOGISTICS_MANAGEMENT Remote Logistics Management
Can any one help me, what business functions do I need to active for Downstream ?
Thanks all,
Thanh.I create customer message ask SAP and these are downstream functions need to active:
1. COMMODITY_MGMT_&_BULK_LOGISTIC (ECC 6.0 )
2. BUSINESS_FUNCTION_BASIS_COM (EhP3)
3. COMM_MGMT&BULK_LOG_1 (EhP3)
4. LOG_COMMODITY_TRANSPORT_MGMT_4 (EhP4)
Thanh. -
Goods Movement through order confirmation for IS oil material
Hello Experts,
I am doing the goods issue posting through the confirmation transaction CORK for process order. The materials that I am posting are IS oil relevant.
When Iam trying to save the confirmation, system is taking to the screen of additional quantity calculation for each materials. When I maintain the details, system is saving the confirmation. But in case if there is a change in the parameters mentioned for additional quantity calculation, system is not giving any option.
In other goods issue transactions, we can see a calculator button which will take us to the quantity calculation screen, if we double click a line item. But I dont find this option in the goods movement screen through order confirmation transactions.
Is there any way to activate it in confirmation screen also, so that we can individually maintain the qty calculation parameters of each goods issue item?.
Appreciate your earliest reply
Thanks & Regards
PrathibNo Inputs?????
-
SAP IDES Scenarios for IS-OIL & Supply Chain Managment
Hello,
Will anyone share the link / where can i get SAP IDES business Scenarios for SAP IS-OIL & Supply Chain Management (SCM)
PVHello All,
I am looking for link SAP IDES Solutions for Model Company for SAP IS-OIL & SCM modules,
Similar to: please go through the below link
SAP Library - IDES - The SAP Model Company
with all scenarios with transactions clearly
https://help.sap.com/saphelp_46c/helpdata/en/a9/fc4f35dfe82578e10000009b38f839/content.htm
PV -
Transaction STWB_1 and Test catalog for IS OIL
Cannot find Test catalogs TK IS-OIL* from transaction STWB_1 as mentioned in document Appl_Test_doc_600_1.pdf attached to SAP Note 890458
I tried to do the following from Appl_Test_doc_600_1.pdf:
Call transaction STWB_1 or from the SAP menu, choose: Tools → ABAP Workbench → Test → Test Workbench → Test Organizer → Manage Test Catalog Choose Utilities → Manage Favorites (Shift+F9) The Manage Favorites dialog box appears.
Select Add favorite (Shift+F5) The Favorites dialog box appears.
Enter OIL_ECATT in the Management Data Package field. Choose Execute (F8). Select all three test catalogs
TK IS-OIL APT
TK IS-OIL APTPRA
TK IS-OIL SC Choose Copy (Enter).I have ECC600 and not 46C as in the not you sent me
Anyway thanks for the support
just for information, in this case we have to Apply ECAK020859.SAR for eCATT and P7IK039071.SAR for custumizing (OSS note 890458)
Regards -
Dear All,
Will appreciate if you share the LSMW for following IS oil Related Masters.
1.0 Materials Master
2.0 Tank Masters
3.0 Vehicle Master
4.0 Driver Master.
Mine email is mentioned in my profile.
Regards,
Vijayproblem resolved
Edited by: Vijay Mundke on Jun 24, 2010 1:04 PM
Edited by: Vijay Mundke on Jun 24, 2010 1:14 PM -
SOLAR01 - BPR content for Oil and Gas - JVA processes
Hello
We are dealing with the creation of the structure (scenario, processes and steps) for a Oil and Gas project trying to use BPR. In order to locate the right process we are dealing with Solution Composer, with configuration variants from the Oil and Gas Soluton Map. We are not able to find any of those processes in the BPR. We look any process with joint or venture words in it but there is none. We have Solman 7.01, stack 25 and ST-ICO 150 level 27 (the latest available)
Any suggestions?
Regards
Esteban HartzsteinHi Vinay,
This entirely a business and consulting decision. In general its good to have different templates for bulk fuels, Crudes, Packed lubes/Gas, and aviation. This still depends on the volume of business in a particular line.
Regards,
Ashutosh -
Template implemntation for oil and gas business with business line of aviat
While standardizing processes across country for a oil and gas business which has implemented SAP ,do a standard template for a fuel business should be used or specific templates for lubes, aviation business lines be used
Hi Vinay,
This entirely a business and consulting decision. In general its good to have different templates for bulk fuels, Crudes, Packed lubes/Gas, and aviation. This still depends on the volume of business in a particular line.
Regards,
Ashutosh -
Prospecting and Exploitation solutions for oil and gas company
Now we are implementing SAP for an oil and gas company, they want to manage Prospecting and Exploitation through PS.Does anyone has some related documents or experiences?We need help eagerly. Thank you!
Are you using SAP's Oil and Gas solution with Joint Venture Accounting.
If I remember correctly we used Business Area's to identify Exploration v Development v Production
Unfortunately no documents available
Steve -
Did they really remove the oil paint filter? That was my reason for purchase!
If they did I am asking for a refund and getting cs6.
Hi Hallbe,
Please refer to the below article for the workaround for the oil paint in Windows.
http://blogs.adobe.com/photoshopdotcom/2014/04/photoshop-spring-cleaning.html
If you have a creative cloud subscription then you are entitled to use CS6, CC and CC2014 versions of Photoshop.
You can download the CC or CS6 version to use the oil paint feature there is no need to go for a refund.
Thank you for posting on Adobe Forums. -
Goods receipt more than intransit quantity for SA
Hi All,
While doing a testing on stock transport order for 2 different company code, noticed that during MIGO in receiving plant system is allowing to receive more than in-intransit quantity for a schedule agreement with agreement type LP and by showing a negative stock in intransit.
Is there anyway to have the system block with error message from preventing user to receive more than intransit quantity for a schedule agreement?negative stock in transit is not allowed.
so it must originate for a SAP bug.
E,g, OSS note 527403 explains a case for IS-OIL Industry solution.
Oss note 210472 a special case regading previous month.
I found about 60 OSS notes when searching with "in transit negative" -
Hi Friends,
Could someone help out with what technologies/databases are being used to capture and maintain the Cost of Goods Sold? (e.g., SAP MM examples or something else) ?
I am working on a downstream project for an oil major and would like to determine which technology would be best for storing the cost of goods sold information.
Thanks
SamHi Sam,
Cost of goods can be determined by any business software.I am big fan of SAP so I will suggest that SAP SD(Sales & distribution ) module will suit best to sales applications.You need to have SAP FI also to cater financial transactions.
Actually SAP ERP package conatins different blocks to cater different needs.
Some of important functionality provided by SAP is
Procure to Pay = SAP MM
Order to Cash = SAP SD
Hire to Retire = SAP HR
Cash to Paymane= SAP FI and these are very much integrated features.
Please see the link mentioned
http://www.sap.com/solutions/business-suite/erp/index.epx
there are lots of brochures /white papers link are available on this page which will give you fair amount of idea about this..
regards,nishant
please reward points if this helps
Maybe you are looking for
-
How to change the size of the force quit window?
When I open the force quit window, it fills my entire screen, and it is larger than the screen of the TFT monitor that I am using from time to time. How can I change its size back to original? The window is not resizable by dragging its border or cli
-
Hi, I am an IT consultant with 8+ years of IT background into ERP & technologies with 4 years into Microsoft ERP(Dynamics). I have been working as techno functional & functional. I have good understanding of processes. By qualification, I am a commer
-
Need infn about bussiness Graphics UI Element in Webdyn Pro
hi Experts, I am using Bussiness Graphics UI Element in Webdyn Pro chart type is Lines this graph is to show utilization of asse for some period say 1 month there will be 2 data series Utilization and Unutilization when i place curser near point uwe
-
Failed to start Fail2Ban Service
Hi All, I used to use fail2ban service to avoid SSH DDos hack in my Arch system. However, I found faiil2ban service failed to be started recently after I perform a system upgrade (pacman -Syu). I keep getting failure when try to start fail2ban servic
-
TS1388 Upgrade macbook air late 2008 to mavericks not working
I have a late 2008 macbook air and im trying to install mavericks, when i press download and install on app store it says it cannot be installed on that macbook air. but according to the specs on the apple webpage its compatible with mavericks. im cu