SD student wants to increase stock of material
Hi,
I am a SD Student learning on IDES system, as a result of running a number of Sales orders i have no inventory for some of the materials i normally use.
How can i increase the stock of the material, so that my SD functions are not interrupted by lack of stock..
Thanks in advance
Kevin
Hi,
If you want to increase your stock due to technical reasons (e.g. you are carrying out test in your test system) you can do it several ways. Some of them were discussed above but you can also increase you stock with MB1A + 202, MB1A + 262 + PrdOrd reference, MB1A + 552, MB1B + 309 (if you want materialA to be materialB) etc.
(Please be careful with these kinds of bookings in your normal system...:) )
BR
Csaba
Similar Messages
-
I want to create stock for particular material in r3 system to check different availabilty checks it triggers like one time delivery ,and delivery proposal (partial delivery) please help me to get these .
you can use MB1C with movement type 501
-
Want to make stock ZERO from KE5Z report
Dear Expert,
I have posted this requirement to CO and MM side. Please extend support of expertise and help me on this issue.
Requirement : Client want to make stock zero which is appearing in KE5Z transaction. see below "83" qty
The input data while running the above transaction is :
Controlling Area:
Company Code:
Posting period : 10
Fiscal year : 2009
Profit center : DE14*
Account : S240075000
Plant : DE01
After entering above data I am getting following result , just pasting as it is ;
Profit center account Acc text Material period year cumm PCLC curr qty BUN
DE14010000 S240075000 productive material D-12578510 10 2009 0.00 EUR 83 EA
In above , client want to make 83 qty to Zero.
I am not getting how come this posting has been happen.
In a material master the profit center maintained is : DE14010000 , and I check all the inventory posting related to this material in MMBE, but I found that this GL is not being enter in any of the inventory posting , the GL which is getting in inventory posting is : S009430000.
Suppose I will make a stock Zero at inventory level ( MMBE) still it is not making stock zero at KE5Z ( because the GL is different)
Basically I am a MM consultant I need your expertise to solve this issue, how we can make this stock to zero in KE5Z report.
Thanks & Regards
OmKE5Z is a profit center report. So better check for profit center than for GL accounts.
Your problem usually arises when a profit center in material master gets changed while there is stock.
so you received stock to profit center A, then profit center was changed to B, all goods issues will be done from profit center B. You never issue the stock from profit center A, but as well you have an issue with the value in profit center B, because you never received stock into profit center B, you only issued.
Check your material master change history to find when the profit center got changed. Then you may have to change it back to the old profit center, goods issue your stock, then turn it to the new profit center and cancel your goods issue.. -
How to check the stock transfer material report
hi
i want to check stock transfer report for material from one plant to other palntHi
To display the value of the cross-company-code stock in transit with a report, choose Environment > Stock > Stock in transit Cc.
Displaying Transit Stock in the Stock Overview
You can display the stock in transit in the stock overview of a material.
From the Inventory Management menu, choose Environment > Stock > Stock overview.
Enter your selection criteria (for example, the material and receiving plant).
Carry out the evaluation. A stock overview of your selected plants is displayed.
Select a plant. The stocks in the plant are displayed in a pop-up window.
Scroll down until the stock in transit is displayed.
Displaying Transit Stock in the Plant Stock Availability List
The transit stock for the receiving plant is also displayed in the plant stock availability list for a material. To do this, proceed as follows:
From the Inventory Management menu, choose Environment > Stock> Plant stock availability.
The initial screen for this function appears.
Enter the material and the receiving plant.
Enter the scope of list (for example, DD).
Carry out the evaluation. A list of the plant stock availability for the material is displayed. -
I want to Take Stock in Transit Report
Hai,
I want to Take Stock in Transit Report for a plant with Qty & Value with Posting Date..
So I can get the report Ex: Before April 1 2009.
MM5t & MC.9 Not upto my requirement.. Any table or tcode is there.?Hi ,
In MB51 you can ehter the posting date
plz follow the following step
SPRO -- Materials Management --Inventory Management and Physical Inventory -- Reporting - - Define Field Selection for Material Document List-- enter RM07DOCS -- and field and table name MKPF --BUDAT and activate the check box
hope this will help u -
Want to fill stock of a materail in a plant
Hi,
I want to fill stock of a specific material in a plant with some quantitities so that I can create deliveries.
What will be the movement type that I would use in tcode MB1C?Dear Christino,
Use T-code MB1C - Other Goods Receipts
Enter Document & Posting Date - Select Movement type 561 & enter plant code & storage location...
Hope this helps...
Give points if useful...
Thanks,
Jignesh Metha -
Max stock level as safety stock from material master while running SNP Heuristic
Hi Experts,
Our user wants to consider max stock level as safety stock from material master while running SNP Heuristic, not the actual safety stock.
Is there any possibility for this setup?
--KishoreHi Kishore,
With the given details I suggest that the user can maintain the max stock level values directly in safety stock field of the material master for all materials to be planned by SNP heuristic (keeping the max stock level field blank). Then this safety stock field (which has actually the max stock level values) will update the safety stock values in APO product master and in turn can be considered for SNP heuristic.
Note: The max stock level field in APO product master is used by SNP heuristic only when the target stock level method is maintained as 4, 5 or 6. Since your requirement is to use max stock level as safety stock, so it does not look like that you will be using these target stock level methods or the max stock level field in R/3 and APO. So, this can be left as blank in both R/3 and APO.
Please let me know if this helps.
Regards,
Umesh -
Show defualt (unrestricted) but i want in migo stock type (Quality inspecti
Dear all,
When i done migo 101 againt STO PO in migo screen stock type show defualt (unrestricted) but i want in migo stock type (Quality inspection)
plz describeDear all thanks
Let me confirm one thing
My scanerio is STPO (stock transfer order) In this scanerion material will be available in both plant receving and supplying plant
Is it require to activate QM inspetion type in both plant ?
If yes so which inspection type is required ?
Edited by: Harish Parab on Jan 21, 2011 12:25 PM -
Change the inspection stock of material 16 in QM only Movement type 105
Hello,
I am trying to do GR with Movement type 105 and gettig the error message " Change the inspection stock of material 16 in QM only"
When I change the stock type from Quality to Unrestricted during 105 movement type, then I do not get this error message.
Scenario : I want Inspection lot to get generated with movement type 103 and not with movement type 105. And with my current settings, Inspection lot is getting generated with 103 and not with 105.
I want that, if I do GR with movement type 105, then the stock should go directly to unrestricted stock and not to Quality stock. BUt currently, it is giving me above mentioned error message.
Thanks and Regards
Prabhjot SinghCan you explain your business scenario.
Here is how standard SAP process is
1. Use movement 103 movement to receive PO in GR blocked stock
No inspection lot is created
2. Move material from GR blocked to own stock using 105 movement
This movement is identical to 101 movement. SAP will create Inspection lot if QM is activated. -
Upload stock for material in storage type ??
hii
How to increase stock for particular material in LS26??
Stock for ware house and storage type ??
ThanksHi,
you need to create some stock in the bin for whatever the operation you are doing. Here are the steps.
first check if you have stock of same material in any of the other bins using LS24. If so, create TO using LT01 (mov type 999) for source and destination bin (bin of your interest) and confirm the TO. Do your operation, it should work.
If its a test system, you can try upload stock in IM using MIGO-501 mov type or MB1B-561 mov type. Crate TO for material document using LT06 (TO may get automatically generated based on your system settings). Confirm the TO (note the destination bin). If the destination bin is not same as the bin of your interest, use first option to transfer stock to bin of your interest.
Thanks,
Ram -
BAPI for get last few month's stock of material
hi gurus,
From T-code mc.9, we can see the last few month stock of material. I want a BAPI that can help me to get a gata for last few months.
Anybody has an idea.
regards
NirdeshHI,
Refer to the link.
RFC bapi function to get stock quantity
This Might Help.
Regards
Sumit Agarwal -
Tables/FM for opening/closing stock for material on given posting date
Hi All,
I had requirement of find the opening/closing stock for material on given posting date. The values we can find out using TCode - MB5B.
But I cannt use MB5B to extract data because I need to find detials for thousands of material.
Can you please adivce if their is any FM or tables through which i can find this detial on any given date apart from current date.
Thanks & Regards,Hi,
[https://forums.sdn.sap.com/click.jspa?searchID=19631709&messageID=6593903]
[https://forums.sdn.sap.com/click.jspa?searchID=19631709&messageID=6630975] -
Table to get "stock of material on a past date "
Hi Guru's,
Can anyone tell me "how to get stock of material on a past date".
Pls tell me from which Table you can fetch these values and in what logic.
Any Input is highly appreciated.
Thanks and Regards,
SelvaHello,
You can get the stock from the table MARDH, MCHBH period wise.
this table is use for history stocks.
Regards
Bhima -
ERROR WHILE POSTING THE STOCK OF MATERIAL
Dear experts
while posting the stock of material iam getting the error 'number ranges for transevent type WA in year 2011 does not exist.
what transaction should be used .
Thanks & Regards.
Erfan.Dear,
First of all please go to T-code FBKP, click on Document Type, double click on document Type "WA" and check what is the value in Number Range.
For Example there it is 01, then got to FBN1, enter company code and give give 01 and against this maintain number.
Hope this helps!!!
Br,Vivek -
In crystal report i want to increase field string value
in crytal report field expolorer a filed named field1 string value is [8]
i want to increase it to [20]
is der any solution?Kindly it's urgent please help
Maybe you are looking for
-
I need a letter with the following information sent toy bank on order go me to get my money back on my card!! The bank also needs a statement saying it is ok to return the funds back on to the card!!! <Personal Information Edited by Host>
-
BAPI_SALESORDER_CHANGE / CREATE
Hi All, I have an urgent problem to solve, I need for specific reason to create or change another sales order during the creation or change of a, let me call, master sales order. This works, when I save the order A the bapi goes and create or change
-
Remove filter criteria from the table
I have used af:table to display data and used filter to filter column data. After specifying any search criteria we need to remove it manually and press enter. I want to remove search criteria programmatically and display table data without any searc
-
Hello, I'd like to get the type of information in version 8 that I can get in version 9 through v$db_cache_advice in order to determine the size that the buffer cache should be. I've found sites that say you can set db_block_lru_extended_statistics t
-
Does not execute actions,customized partner-dependently
Dear all, The system does not display or execute actions if they have been customized partner-dependently. If the same business partner exists more than once, for example as a sold-to party, as a payer and so on, only one of the partner roles, the ac